journal article·2025-05-13Open access

The impact of mining environment on selected functional properties of commercial greases thickened with lithium soap and calcium sulfonate

Maciej Paszkowski, Sylwia Olsztyńska-Janus, Piotr Aleksander Stelmaszek, Mariusz Opałka

Abstract

Abstract The study examined the influence of the mining environment on selected functional properties of two commercial greases thickened with lithium 12-hydroxystearate and overbased calcium sulfonate. The study conducted a comparative analysis of fresh greases and those that had been used in operation. The tests were performed in climatic conditions similar to those found in the mine. The greases were evaluated for their resistance to water washout at 38 °C, as well as their dropping point and anti-corrosion properties in the presence of brine (EMCOR method). Additionally, rheological tests were conducted to assess the behavior of the greases in the lubrication film of a real friction node. Moreover, tribological tests were carried out under varying loads on the lubricated friction node. A custom-designed test rig for measuring frictional resistance in oscillatory motion was used for these evaluations. The conclusions from the study on the impact of the mining environment on the functional properties of greases were supported by the results of their ATR-IR spectroscopic analysis. The research results showed that contaminants from the mine's atmosphere affect the functional properties and the structure of the thickeners of both greases. The greases subjected to use, compared to fresh greases, exhibited increased resistance to water washout. Most other parameters, including rheological and tribological properties, significantly deteriorated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Advancements in Materials Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. Global energy consumption due to friction and wear in the mining industry. Tribol Int. 2017;115:116–39.10.1016/j.triboint.2017.05.010 ↗
2. Scott W. Mining industry. In: Totten GE, editor. Handbook of lubrication and tribology: Application and maintenance. 2nd ed. CRC press: Boca Raton, USA; 2006; Volume 2. pp. 1–25.10.1201/9781420003840.ch20 ↗
3. Wszelaczyński G, Capanidis D, Paszkowski M, Leśniewski T. Operating problems of lubrication of friction nodes in mining machines working in an aggressive environment. In: International scientific-technical conference on hydraulic and pneumatic drives and control. Cham, Switzerland: Springer International Publishing; 2020. pp. 228–238.10.1007/978-3-030-59509-8_20 ↗
4. Zaitsev A, Parshakov O, Semin M. Heat emissions from mining machinery: implications for microclimatic conditions in underground workings. Mining. 2024;4(4):1075–92.10.3390/mining4040059 ↗
5. Fernandez-Rubio R, Lorca DF. Mine water drainage. Mine Water Environ. 1993;12(1):107–30.10.1007/BF02914803 ↗
6. Rawat NS. Corrosivity of underground mine atmospheres and mine waters: a review and preliminary study. Br Corros J. 1976;11(2):86–91.10.1179/000705976798320179 ↗
7. Paszkowski M, Stelmaszek PA, Krzak J. Effects of contamination on selected rheological and tribological properties of lubricating greases working in underground mines. Lubricants. 2023;11(10):425.10.3390/lubricants11100425 ↗
8. Lugt PM. Grease lubrication in rolling bearings. Hoboken, NJ, USA: John Wiley & Sons; 2012.10.1002/9781118483961 ↗
9. ASTM D1264—Standard test method for determining the water washout characteristics of lubricating greases
10. ASTM D1193—Standard specification for reagent water
11. ASTM D2265—Standard test method for dropping point of lubricating greases
12. ASTM D6138—Standard test method for rust-preventing characteristics of lubricating greases using the EMCOR rust test
13. Shih WH, Shih WY, Kim SI, Liu J, Aksay IA. Scaling behavior of the elastic properties of colloidal gels. Phys Rev A. 1990;42:4772–9.10.1103/PhysRevA.42.4772 ↗
14. Opałka M. Method of measuring frictional resistance in pendular motion. Quarterly Tribologia. 2021;295(1):15–9.10.5604/01.3001.0015.4895 ↗
15. Petersen C. Stahlbau. Grundlagen der Berechnung und baulichen Ausbildung von Stahlbauten. Wiesbaden, Germany: Springer Vieweg; 2022. pp. 129–227.
16. Olsztyńska-Janus S, Czarnecki MA. Effect of elevated temperature and UV radiation on molecular structure of linoleic acid by ATR-IR and two-dimensional correlation spectroscopy. Spectrochim Acta Part A. 2020;238: 118436.10.1016/j.saa.2020.118436 ↗
17. Maréchal Y. Interaction configurations of H2O molecules in a protein (Stratum Corneum) by infrared spectrometry. J Mol Struct. 1997;416:133–1437.10.1016/S0022-2860(97)00032-X ↗
18. Cyriac F, Lugt PM, Bosman R. Impact of water on the rheology of lubricating greases. Trib Trans. 2016;59(4):679–89.10.1080/10402004.2015.1107929 ↗
19. Olsztyńska-Janus S, Kiełbowicz Z, Czarnecki MA. ATR technique in the study of skin components: lipids, proteins and water. Part II: Near infrared radiation effects. Spectrochim Acta Part A. 2018;202:93–101.10.1016/j.saa.2018.05.036 ↗
20. Zhou Y, Bosman R, Lugt PM. A master curve for the shear degradation of lubricating greases with a fibrous structure. Tribol Trans. 2019;62:78–87.10.1080/10402004.2018.1496304 ↗
21. Authier D, Herman A. Calcium sulfonate carbonate greases: a solution to water resistance. Eurogrease. 2013;3:19–35.
22. Bosman R, Lugt PM. The microstructure of calcium sulfonate complex lubricating grease and its change in the presence of water. Trib Trans. 2018;61(5):842–9.10.1080/10402004.2018.1431752 ↗
23. Muir RJ. High performance calcium sulfonate complex lubricating grease. NLGI spokesman. 1988;52(4):140–6.
24. Paszkowski M, Olsztyńska-Janus S. Grease thixotropy: evaluation of grease microstructure change due to shear and relaxation. Ind Lubr Tribol. 2014;66(2):223–37.10.1108/ILT-02-2012-0014 ↗
25. Sun L, Ma R, Zhao Q, Zhao G, Wang X. The impact of water on the tribological behavior of lubricating grease based on calcium carbonate polymorphs. Lubricants. 2022;10(8):188.10.3390/lubricants10080188 ↗
26. Gurt A, Khonsari M. An overview of grease water resistance. Lubricants. 2020;8(9):1–12.10.3390/lubricants8090086 ↗
27. Cyriac F, Lugt PM, Bosman R. Impact of water on calcium sulfonate greases. ASME/STLE International Joint Tribology Conference, May 19–22, 2014, Orlando, USA.
28. Muir RJ. Calcium sulfonate grease one decade later. NLGI Spokesman. 1998;63(5):24–37.
29. Kimura Y, Takemura K, Araki J, Kojima H. Study of synthetic oil based calcium sulfonate complex greases. NLGI Spokesman. 2006;70(9):20–6.
30. Lugt PM. Modern advancements in lubricating grease technology. Trib Int. 2016;97:467–77.10.1016/j.triboint.2016.01.045 ↗
31. Kay E. The corrosion of steel in contact with molybdenum bisulphide. Wear. 1968;12(3):165–71.10.1016/0043-1648(68)90523-1 ↗
32. Zheng M, Ren G, Wang S, Li Y, Xing M. Investigating the effect of overbased sulfonates on calcium sulfonate complex grease: enhancements in physicochemical, rheological, and tribological properties. RSC Adv. 2024;14(45):32992–3006.10.1039/D4RA04307C ↗
33. Tavacoli JW, Dowding PJ, Steytler DC, Barnes DJ, Routh AF. Effect of water on overbased sulfonate engine oil additives. Langmuir. 2008;24:3807–13.10.1021/la703680e ↗
34. Xiong CH, Mi HY, Feng Q, Wu BJ. Comparative studies on low noise greases operating under high temperature oxidation condition. China Pet Process Petrochem Technol. 2014;16(4):100–6.
35. Czarny R. Einfuss der Thixotropie auf die rheologischen Eigenschaften der Schmierfette. Tribol Schmierungstech. 1983;3(36):134–40.
36. Paszkowski M. Some aspects of grease flow in lubrication systems and friction nodes. In: Tribology—fundamentals and advancements. Intech: Rijeka, Croatia; 2013. pp. 77–106.10.5772/55929 ↗
37. Ahme L, Kuhn E, Delgado MA. Experimental study on the expended energy on structural degradation of lubricating greases. Trib Lett. 2022;70(3):81.10.1007/s11249-022-01622-2 ↗
38. Acar N, Franco JM, Kuhn E. On the shear-induced structural degradation of lubricating greases and associated activation energy: An experimental rheological study. Tribol Int. 2020;144: 106105.10.1016/j.triboint.2019.106105 ↗
39. Delgado MA, Secouard S, Valencia C, Franco JM. On the steady-state flow and yielding behaviour of lubricating greases. Fluids. 2019;4(1):6.10.3390/fluids4010006 ↗
40. Zakani B, Ansari M, Grecov D. Dynamic rheological properties of a fumed silica grease. Rheol Acta. 2018;57:83–94.10.1007/s00397-017-1064-6 ↗
41. Kozdrach R, Drabik J, Szczerek M. Influence of silicon additives on tribological and rheological test results for vegetable lubricants. Materials. 2023;16(18):6245.10.3390/ma16186245 ↗
42. Paszkowski M. Assessment of the effect of temperature, shear rate and thickener content on the thixotropy of lithium lubricating greases. Proc Inst Mech Eng Part J Eng Tribol. 2012;227(3):209–19.10.1177/1350650112460950 ↗
43. Paszkowski M, Olsztyńska-Janus S, Wilk I. Studies of the kinetics of lithium grease microstructure regeneration by means of dynamic oscillatory rheological tests and FTIR–ATR spectroscopy. Trib Lett. 2014;56:107–17.10.1007/s11249-014-0390-4 ↗
44. Zhang E, Li W, Zhao G, Wang Z, Wang X. A study on microstructure, friction and rheology of four lithium greases formulated with four different base oils. Tribol Lett. 2021;69(3):98.10.1007/s11249-021-01469-z ↗
45. Bonta J, Pham JT. Oil viscosity effects on lithium 12-hydroxystearate grease modulus and thixotropy. ASME J Tribol. 2025;147(4): 044602.10.1115/1.4067661 ↗
46. Hudedagaddi CB, Raghav AG, Tortora AM, Veeregowda DH. Water molecules influence the lubricity of greases and fuel. Wear. 2017;376:831–5.10.1016/j.wear.2017.02.002 ↗
47. Chinas-Castillo F, Spikes H. Film formation by colloidal overbased detergents in lubricated contacts. Tribol Trans. 2008;43(3):357–66.10.1080/10402000008982351 ↗
48. Greenall A, Neville A, Morina A, Sutton M. Investigation of the interactions between a novel, organic anti-wear additive, ZDDP and overbased calcium sulphonate. Tribol Int. 2012;46(1):52–61.10.1016/j.triboint.2011.06.016 ↗
49. Sun L, Zhao Q, Zhao G, Su H, Lai B, Guo F, Wang X. Synergistic lubricating effect for calcium phosphate modified calcium sulfonate grease with highly load bearing capacity. Tribol Int. 2024;199: 110029.10.1016/j.triboint.2024.110029 ↗
50. Vazirisereshk MR, Martini A, Strubbe DA, Baykara MZ. Solid lubrication with MoS2: a review. Lubricants. 2019;7(7):57.10.3390/lubricants7070057 ↗