A coupled thermo-mechanical model for warm single-point incremental forming process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Ambrogio G, Filice L, Manco GL. Warm incremental forming of magnesium alloy AZ31. CIRP Ann Manuf Technol. 2008;57:257–60. https://doi.org/10.1016/j.cirp.2008.03.066.10.1016/j.cirp.2008.03.066 ↗
2. Kumar N, Lingam R, Agrawal A. Enhancement of incremental forming process formability by using improved clamping and multi-stage deformation strategies. Int J Adv Manuf Technol. 2023. https://doi.org/10.1007/s00170-023-12298-w.10.1007/s00170-023-12298-w ↗
3. Pandre S, Kotkunde N, Morchhale A, Singh SK, Saxena A. Comparative study of formability characteristics in deep drawing of DP 590 steel using analytical models. Adv Mater Process Technol. 2021;00:1–11. https://doi.org/10.1080/2374068X.2021.1945273.10.1080/2374068X.2021.1945273 ↗
4. Ullah S, Li Y, Li X, Xu P, Li D. A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming. Arch Civ Mech Eng. 2022;23:55. https://doi.org/10.1007/s43452-022-00585-4.10.1007/s43452-022-00585-4 ↗
5. Kumar N, Bharti S, Krishnaswamy H, Agrawal A. Exploring deformation mechanics of temperature assisted incremental forming with hybrid heating. J Manuf Process. 2023;104:472–84. https://doi.org/10.1016/j.jmapro.2023.09.017.10.1016/j.jmapro.2023.09.017 ↗
6. Cusanno A, Negrini NC, Villa T, Fare S, Garcia-Romeu ML, Palumbo G. Post forming analysis and in vitro biological characterization of AZ31B processed by incremental forming and coated with electrospun polycaprolactone. J Manuf Sci Eng Trans ASME. 2021;143:1–11. https://doi.org/10.1115/1.4048741.10.1115/1.4048741 ↗
7. Li W, Attallah MM, Essa K. Heat-assisted incremental sheet forming for high-strength materials—a review. Int J Adv Manuf Technol. 2023;124:2011–36. https://doi.org/10.1007/s00170-022-10561-0.10.1007/s00170-022-10561-0 ↗
8. Su C, Zhang M, Yang H, Lv S, Li X, Zhang G, Lv Y, Lou S, Wang R. Study on forming limit of single-point progressive forming of AZ31B magnesium alloy under isothermal local loading. Int J Adv Manuf Technol. 2022;118:221–36. https://doi.org/10.1007/s00170-021-07935-1.10.1007/s00170-021-07935-1 ↗
9. Kumar N, Upadhyay RK, Sharma CS. Surface quality enhancement of warm incremental forming process using solid lubricant with varying etching period. 2023. https://doi.org/10.1177/09544054231194106.10.1177/09544054231194106 ↗
10. Gohil A, Modi B. Review of the effect of process parameters on performance measures in the incremental sheet forming process. Proc Inst Mech Eng Part B J Eng Manuf. 2021;235:303–32. https://doi.org/10.1177/0954405420961215.10.1177/0954405420961215 ↗
11. Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H. Laser assisted incremental forming: Formability and accuracy improvement. CIRP Ann Manuf Technol. 2007;56:273–6. https://doi.org/10.1016/j.cirp.2007.05.063.10.1016/j.cirp.2007.05.063 ↗
12. Kim SW, Lee YS, Kang SH, Lee JH. Incremental forming of Mg alloy sheet at elevated temperatures. J Mech Sci Technol. 2007. https://doi.org/10.1007/BF03177368.10.1007/BF03177368 ↗
13. Ji YH, Park JJ. Incremental forming of free surface with magnesium alloy AZ31 sheet at warm temperatures. Trans Nonferr Met Soc China (English Ed). 2008;18:s165–9. https://doi.org/10.1016/s1003-6326(10)60195-1.10.1016/s1003-6326(10)60195-1 ↗
14. Ambrogio G, Gagliardi F, Chamanfar A, Misiolek WZ, Filice L. Induction heating and cryogenic cooling in single point incremental forming of Ti-6Al-4V : process setup and evolution of microstructure and mechanical properties. Int J Adv Manuf Technol. 2016. https://doi.org/10.1007/s00170-016-9794-7.10.1007/s00170-016-9794-7 ↗
15. Galdos L, De Argandoña ES, Ulacia I, Arruebarrena G. Warm incremental forming of magnesium alloys using hot fluid as heating media. Key Eng Mater. 2012;504–506:815–20. https://doi.org/10.4028/www.scientific.net/KEM.504-506.815.10.4028/www.scientific.net/KEM.504-506.815 ↗
16. Liu Z. Heat-assisted incremental sheet forming: a state-of-the-art review. Int J Adv Manuf Technol. 2018;98:2987–3003.10.1007/s00170-018-2470-3 ↗
17. Adams JJD, Mcanulty MDT. Single point and asymmetric incremental forming. Adv Manuf. 2015;3:253–62. https://doi.org/10.1007/s40436-015-0126-1.10.1007/s40436-015-0126-1 ↗
18. Li Y, Wang Z, Zhai W, Cheng Z. The influence of ultrasonic vibration on parts properties during incremental sheet forming. Adv Manuf. 2021;9:250–61. https://doi.org/10.1007/s40436-021-00347-0.10.1007/s40436-021-00347-0 ↗
19. Yuan H, Le Li Y, Liu YY, Zhao GL, Li FY. Improving the forming performance of incrementally formed sheet parts with customized heat treatment strategies. Adv Manuf. 2023;11:264–79. https://doi.org/10.1007/s40436-022-00431-z.10.1007/s40436-022-00431-z ↗
20. Ji YH, Park JJ. Formability of magnesium AZ31 sheet in the incremental forming at warm temperature. J Mater Process Technol. 2008;201:354–8. https://doi.org/10.1016/j.jmatprotec.2007.11.206.10.1016/j.jmatprotec.2007.11.206 ↗
21. Wang L, Qiao Q, Liu Y, Song X. Formability of AZ31 Mg alloy sheets within medium temperatures. J Magnes Alloy. 2013;1:312–7. https://doi.org/10.1016/j.jma.2014.01.001.10.1016/j.jma.2014.01.001 ↗
22. Duc-Toan N, Jin-Gee P, Young-Suk K. Combined kinematic/isotropic hardening behavior study for magnesium alloy sheets to predict ductile fracture of rotational incremental forming. Int J Mater Form. 2010;3:939–42. https://doi.org/10.1007/s12289-010-0923-9.10.1007/s12289-010-0923-9 ↗
23. Honarpisheh M, Abdolhoseini MJ, Amini S. Experimental and numerical investigation of the hot incremental forming of Ti–6Al–4V sheet using electrical current. Int J Adv Manuf Technol. 2016;83:2027–37. https://doi.org/10.1007/s00170-015-7717-7.10.1007/s00170-015-7717-7 ↗
24. Fan G, Gao L, Hussain G, Wu Z. Electric hot incremental forming: a novel technique. Int J Mach Tools Manuf. 2008;48:1688–92. https://doi.org/10.1016/j.ijmachtools.2008.07.010.10.1016/j.ijmachtools.2008.07.010 ↗
25. Magnus CS. Joule heating of the forming zone in incremental sheet metal forming: Part 1: state of the art and thermal process modelling. Int J Adv Manuf Technol. 2017;91:1309–19. https://doi.org/10.1007/s00170-016-9786-7.10.1007/s00170-016-9786-7 ↗
26. Magnus CS. Joule heating of the forming zone in incremental sheet metal forming: Part 2: creating an experimental setup and forming of Ti6Al4V. Int J Adv Manuf Technol. 2017;89:295–309. https://doi.org/10.1007/s00170-016-9008-3.10.1007/s00170-016-9008-3 ↗
27. Min J, Seim P, Störkle D, Thyssen L, Kuhlenkötter B. Thermal modeling in electricity assisted incremental sheet forming. Int J Mater Form. 2017;10:729–39. https://doi.org/10.1007/s12289-016-1315-6.10.1007/s12289-016-1315-6 ↗
28. Kumar R, Goel V, Kumar A. A note on the comparative analysis between rectangular and modified duct heat exchanger. J Heat Transf. 2020;142:41901. https://doi.org/10.1115/1.4045755.10.1115/1.4045755 ↗
29. Kumar R, Goel V, Kumar M. Effect of providing gap in multiple-arc rib-roughened solar air heater—Part 1. J Mech Sci Technol. 2020;34:1–7. https://doi.org/10.1007/s12206-020-0535-3.10.1007/s12206-020-0535-3 ↗
30. Kumar R, Kharub M, Kumar V, Varun. Heat augmented due to array of protrusions on absorber plate in solar heat exchanger. Mater Today Proc. 2021;38:2425–30. https://doi.org/10.1016/j.matpr.2020.07.384.10.1016/j.matpr.2020.07.384 ↗
31. Mohanraj R, Elangovan S. Thermal modeling and experimental investigation on the influences of the process parameters on warm incremental sheet metal forming of titanium grade 2 using electric heating technique. Int J Adv Manuf Technol. 2020;110:255–74. https://doi.org/10.1007/s00170-020-05851-4.10.1007/s00170-020-05851-4 ↗
32. Mohanty S, Regalla SP, Daseswara Rao YV. Robot-assisted incremental sheet metal forming under the different forming condition. J Braz Soc Mech Sci Eng. 2019;41:1–12. https://doi.org/10.1007/s40430-019-1581-6.10.1007/s40430-019-1581-6 ↗
33. Aerens R, Eyckens P, Van Bael A, Duflou JR. Force prediction for single point incremental forming deduced from experimental and FEM observations. Int J Adv Manuf Technol. 2010;46:969–82. https://doi.org/10.1007/s00170-009-2160-2.10.1007/s00170-009-2160-2 ↗
34. Atkins AG, Mai YW. Fracture strains in sheet metalforming and specific essential work of fracture. Eng Fract Mech. 1987;27:291–7. https://doi.org/10.1016/0013-7944(87)90147-0.10.1016/0013-7944(87)90147-0 ↗
35. Madeira T, Silva CMA, Silva MB, Martins PAF. Failure in single point incremental forming. J Mater Process Technol. 2015. https://doi.org/10.1007/s00170-014-6381-7.10.1007/s00170-014-6381-7 ↗
36. Bansal A, Lingam R, Yadav SK, Venkata Reddy N. Prediction of forming forces in single point incremental forming. J Manuf Process. 2017;28:486–93. https://doi.org/10.1016/j.jmapro.2017.04.016.10.1016/j.jmapro.2017.04.016 ↗
37. Isik K, Silva MB, Tekkaya AE, Martins PAF. Formability limits by fracture in sheet metal forming. J Mater Process Technol. 2014;214:1557–65.10.1016/j.jmatprotec.2014.02.026 ↗
38. Sheng ZQ, Mallick PK. A ductile failure criterion for predicting sheet metal forming limit. Int J Mech Sci. 2017;128–129:345–60. https://doi.org/10.1016/j.ijmecsci.2017.05.002.10.1016/j.ijmecsci.2017.05.002 ↗
39. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Prod Br Rubber Bur Natl. 1947:281–297.10.1098/rspa.1948.0045 ↗
40. Yang H, Huang L, Zhan M. Coupled thermo-mechanical FE simulation of the hot splitting spinning process of magnesium alloy AZ31. Comput Mater Sci. 2010;47:857–66. https://doi.org/10.1016/j.commatsci.2009.11.014.10.1016/j.commatsci.2009.11.014 ↗
41. Kumar N, Singh A, Agrawal A. Formability analysis of AA1200 H14 aluminum alloy using single point incremental forming process. Trans Indian Inst Met. 2020;73:1975–84. https://doi.org/10.1007/s12666-020-02014-7.10.1007/s12666-020-02014-7 ↗
42. Fang Y, Lu B, Chen J, Xu DK, Ou H. Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming. J Mater Process Technol. 2014;214:1503–15. https://doi.org/10.1016/j.jmatprotec.2014.02.019.10.1016/j.jmatprotec.2014.02.019 ↗
43. Liu Z, Li Y, Meehan PA. Vertical wall formation and material flow control for incremental sheet forming by revisiting multistage deformation path strategies. Mater Manuf Process. 2013;28:562–71. https://doi.org/10.1080/10426914.2013.763964.10.1080/10426914.2013.763964 ↗