journal article·2025-03-23

The influence of nickel content on the structure parameters and magnetic properties of austenitic ductile iron castings

Magdalena Bork, Robert Chulist, Marcin Górny, Maciej Kowalczyk, Jan Marosz

Publisher page

Abstract

Ductile austenitic cast irons are a series of cast irons, which typically contain nickel in the range of 18–36% weight. Its addition in an amount higher than 18 wt% allows the austenitic metallic matrix to be obtained in castings. Consequently, the material has relatively good mechanical properties with elongation exceeding 40% and can operate in a wide temperature range from 77 to 1123 K. Despite its wide range of excellent mechanical properties and corrosion resistance, the important area of magnetic properties of austenitic ductile iron is still largely unknown. Therefore, the main aim of this study was to show the role of nickel and chromium content in shaping the magnetic properties and correlate it with the structural and microstructural features such as chemical order, lattice parameters distribution of graphite nodules and primary austenitic dendrite structure including the microsegregation process. In this context, austenitic ductile iron with the addition of 21, 25, 28, and 35 wt% of nickel with and without the addition of chromium at the level of 2.5 wt% was investigated. Material characterization was carried out utilizing optical and scanning electron microscopy, including electron backscatter diffraction, high-energy synchrotron X-ray radiation, and magnetic properties using vibrating sample magnetometer (VSM). The investigation of the magnetic properties revealed that the nickel content strongly influences the magnetic characteristic of the analysed ductile cast iron, contributing to a better understanding of its potential uses in various industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. RMIS—Raw Materials Information System https://rmis.jrc.ec.europa.eu/rmp/Nickel. Accesed Oct 6, 2024
2. Granta Selector 2023 R1Version :23.1.1. Database
3. Sun Y, Hu S, Xiao Z, You S, Zhao J. Effects of nickel on low-temperature impact toughness and corrosion resistance of high-ductility ductile iron. Mater Des. 2012;41:37–42.10.1016/j.matdes.2012.03.039 ↗
4. Moe G. Properties and applications of Ni-Resist and ductile Ni-Resist alloys. 2nd ed. Durham: Nickel Institute; 2022.
5. Hickling S, Coating or lining chemical, culinary, and other utensils, British Patent 2,296 (March 25, 1799)
6. Poole MS, Combining iron with other metals to prevent oxidation, and rendering mallable iron more hard and durable, British Patent 10,971 (May 27 1846)
7. Fairbarin. Experiments to determine the properties of some mixtures of cast iron and nickel. Mem Lit Phil Soc Manchester. 1860;2(15):104.
8. Gumienny G, Kurowska B, Szymczak T, Gawroński J. Nickel in compacted graphite iron. Arch Metall Mater. 2017;62:657–62. https://doi.org/10.1515/amm-2017-0096.10.1515/amm-2017-0096 ↗
9. Labrecque C, Gagné M. Review ductile iron fifty years of continuous development. Can Metall Q. 1998;37:343–78.
10. ISO 2892:2007 Austenitic cast irons—classification
11. ASTM A439(2022) Standard specification for austenitic ductile iron castings
12. Yang YL, Cao ZY, Song Z, Hai L, Yu X. A study on microstructure of ductile ni-resist cast iron for exhaust manifolds and mechanical property at the condition of altermative thermal cycles. Adv Mater Res. 2011;194–196:95–9. https://doi.org/10.4028/www.scientific.net/AMR.194-196.95.10.4028/www.scientific.net/AMR.194-196.95 ↗
13. EN 1563. Founding—spheroidal cast irons. Brussels: European Committee for standardization (CEN); 2018.
14. Chulist R, Wójcik A, Sozinov A, Tokarski T, Faryna M, Schell N, Skrotzki W, Li B, Sehitoglu H, Li X, Maziarz W. Adaptive phase or variant formation at the austenite/twinned martensite interface in modulated Ni–Mn–Ga martensite. Adv Funct Mater. 2024;34:10. https://doi.org/10.1002/adfm.202307322.10.1002/adfm.202307322 ↗
15. Wójcik A, Chulist R, Czaja P, Kowalczyk M, Zackiewicz P, Schell N, Maziarz W. Evolution of microstructure and crystallographic texture of Ni-Mn-Ga melt-spun ribbons exhibiting 1.15% magnetic field-induced strain. Acta Mater. 2021;219:117237. https://doi.org/10.1016/j.actamat.2021.117237.10.1016/j.actamat.2021.117237 ↗
16. Fatahalla N, AbuElEzz A, Semeida M. C, Si and Ni as alloying elements to vary carbon equivalent of austenitic ductile cast iron: microstructure and mechanical properties. Mater Sci Eng A. 2009;504:81–9. https://doi.org/10.1016/j.msea.2008.10.019.10.1016/j.msea.2008.10.019 ↗
17. Ma S, Xing J, He Y, Li Y, Huang Z, Liu G, Geng Q. Microstructure and crystallography of M7C3 carbide in chromium cast iron. Mater Chem Phys. 2015;161:65–7. https://doi.org/10.1016/j.matchemphys.2015.05.008.10.1016/j.matchemphys.2015.05.008 ↗
18. Wiengmoon A, Chairuangsri T, Brown A, Brydson R, Edmonds DV, Pearce JTH. Microstructural and crystallographical study of carbides in 30 wt%Cr cast irons. Acta Mater. 2005;53(15):4143–54. https://doi.org/10.1016/j.actamat.2005.05.019.10.1016/j.actamat.2005.05.019 ↗
19. Stefanescu DM. Science and engineering of casting solidification. Springer. 2015. https://doi.org/10.1007/978-3-319-15693-4.10.1007/978-3-319-15693-4 ↗
20. Maxwell I, Hellawell A. A simple model for grain refinement during solidification. Acta Metall. 1975;23(2):229–37. https://doi.org/10.1016/0001-6160(75)90188-1.10.1016/0001-6160(75)90188-1 ↗
21. Kobayashi Y, Todoroki H, Mizuno K. Problems in solidification model for microsegregation analysis of Fe–Cr–Ni–Mo–Cu alloys. ISIJ Int. 2019;59(2):277–82. https://doi.org/10.2355/isijinternational.ISIJINT-2018-557.10.2355/isijinternational.ISIJINT-2018-557 ↗
22. Kobayashi Y, Dobara K, Todoroki H, Nam C, Morishita K, Yasuda H. In-situ measurements of solute partition coefficients between solid and liquid phases in Fe–Cr–Ni–Mo–Cu alloys during solidification. ISIJ Int. 2020;60(2):276–85. https://doi.org/10.2355/isijinternational.ISIJINT-2019-444.10.2355/isijinternational.ISIJINT-2019-444 ↗
23. Kobayashi Y, Todoroki H, Nakano K, Narumi T, Yasuda H. A modified random sampling method using unidirectionally solidified specimen: solute partition coefficients in Fe–Cr–Ni–Mo–Cu alloys. ISIJ Int. 2021;61(6):1879–88. https://doi.org/10.2355/isijinternational.ISIJINT-2020-775.10.2355/isijinternational.ISIJINT-2020-775 ↗
24. Konyaeva MA, Medvedeva NI. Electronic structure, magnetic properties, and stability of the binary and ternary carbides (Fe, Cr)3C and (Fe, Cr)7C3. Phys Solid State. 2009;51:2084–9. https://doi.org/10.1134/S1063783409100151.10.1134/S1063783409100151 ↗
25. Sobolev A, Mirzoev A. Structure and stability of (Cr, Fe)7C3 ternary carbides in solid and liquid state. J Alloys Compounds. 2019;804:566–72. https://doi.org/10.1016/j.jallcom.2019.06.282.10.1016/j.jallcom.2019.06.282 ↗
26. Kayser FX. A re-examination of Westbrook’s X-ray diffraction pattern for Cr7C3. Mater Res Bull. 1996;31(6):635–8. https://doi.org/10.1016/0025-5408(96)00045-1.10.1016/0025-5408(96)00045-1 ↗
27. Glocker R. Materialprüfung mit Röntgenstrahlen. Berlin: Verlag von Julius Springer; 1936.