journal article·2025-03-05Open access

Failure analysis of novel hybrid busbars made by hole hemming for electric vehicle applications

B. F. A. da Silva, M. M. Kasaei, A. Akhavan-Safar, R. J. C. Carbas, E. A. S. Marques, L. F. M. da Silva

Abstract

Abstract This paper focuses on the failure behavior of novel joints between aluminum and copper sheets produced by hole hemming, with potential applications in hybrid busbars for electric vehicle batteries. This technology involves deforming the aluminum sheet to create a mechanical interlock with the copper sheet, eliminating the need for additional elements, heat, or welding. First, the materials are characterized, and the most suitable strain hardening law is determined to model their post-necking behavior. Then, to model their ductile fracture behavior, the Modified Mohr–Coulomb (MMC) fracture criterion is calibrated through uniaxial tension, plane strain, and shear tension tests. Next, hole-hemmed joints are manufactured and subjected to shear tests. A comprehensive numerical model of the hole hemming process and shear test is developed to investigate the joints’ failure mechanisms and study the influence of mechanical interlock and process deformation history on joint performance. The findings show that the created joints achieve a maximum load of 3.56 kN and a displacement of 9.30 mm. The main failure mode predicted is hole bearing, which aligns with the mode observed in experimental tests. Finite element analysis reveals that while no damage occurs in the copper sheet during the joining process, this sheet is damaged during the shear test, leading to joint failure. Additionally, a higher mechanical interlock leads to greater failure displacement and load, although it decreases the initial load level. This research demonstrates that novel hole-hemmed joints can effectively connect aluminum and copper sheets, presenting promising results for battery applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Mechanical Failure Analysis and Simulation · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Budde-Meiwes H, et al. A review of current automotive battery technology and future prospects. Proc Instit Mech Eng Part D J Automob Eng. 2013;227(5):761–76.10.1177/0954407013485567 ↗
2. Zwicker MF, Moghadam M, Zhang W, Nielsen CV. Automotive battery pack manufacturing–a review of battery to tab joining. J Adv Join Proc. 2020;1:100017.
3. Qu Y, Sun Z, Spettmann C, Xing B, Xia Y, Zhou Q. Model development of laser welding in lithium-ion prismatic cell for enhancing failure prediction. Int J Mech Sci. 2023;259:108637.10.1016/j.ijmecsci.2023.108637 ↗
4. Pragana JP, Baptista RJ, Bragança IM, Silva CM, Alves LM, Martins PA. Manufacturing hybrid busbars through joining by forming. J Mater Proc Technol. 2020;279:116574.10.1016/j.jmatprotec.2019.116574 ↗
5. Sampaio RFV, Pragana JPM, Bragança IMF, Silva CMA, Nielsen CV, Martins PAF. Electric performance of fastened hybrid busbars: an experimental and numerical study. Proc Instit Mech Eng Part L J Mater Design Appl. 2021;236(6):1152–63.
6. Sampaio RFV, et al. Busbars for e-mobility: State-of-the-Art Review and a New Joining by Forming Technology. In: Mechanical and Industrial Engineering Materials Forming, Machining and Tribology. Cham: Springer; 2022. p. 111–41.
7. Martinsen K, Hu SJ, Carlson BE. Joining of dissimilar materials. CIRP Ann. 2015;64(2):679–99.10.1016/j.cirp.2015.05.006 ↗
8. Jamshidi AH. Effect of heat input in dissimilar friction stir welding of A390–10 wt% SiC composite–AA2024 aluminum alloy. Arch Civil Mech Eng. 2024;24(3):172.10.1007/s43452-024-00957-y ↗
9. Dwibedi S, Kumar B, Bag S. Phase transformation effect on residual stress development in fusion welding of dissimilar stainless steels with different thickness. Arch Civil Mech Eng. 2024;24(3):148.10.1007/s43452-024-00958-x ↗
10. Kumar N, Masters I, Das A. In-depth evaluation of laser-welded similar and dissimilar material tab-to-busbar electrical interconnects for electric vehicle battery pack. J Manuf Proc. 2021;70:78–96.10.1016/j.jmapro.2021.08.025 ↗
11. Gotawala N, Shrivastava A. Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper. J Manuf Proc. 2020;57:725–36.10.1016/j.jmapro.2020.07.043 ↗
12. Beygi R, Carbas RJC, Marques EAS, Barbosa AQ, Kasaei MM, da Silva LFM. Mechanism of toughness enhancement of brittle fracture by intermittent η-intermetallic in Al/Cu joint made by FSW. Mater Sci Eng A. 2024;890:145907.10.1016/j.msea.2023.145907 ↗
13. Sun Z, Liang Z, Wang L, Liu Y, Liang Y, Wang D. Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy joints welded by ultrasonic spot welding with soft specification. J Manuf Proc. 2024;116:306–14.10.1016/j.jmapro.2024.02.061 ↗
14. Dimatteo V, Ascari A, Fortunato A. Continuous laser welding with spatial beam oscillation of dissimilar thin sheet materials (Al-Cu and Cu-Al): Process optimization and characterization. J Manuf Proc. 2019;44:158–65.10.1016/j.jmapro.2019.06.002 ↗
15. Kasaei MM, Beygi R, Carbas RJC, Marques EAS, da Silva LFM. A review on mechanical and metallurgical joining by plastic deformation. Discover Mech Eng. 2023;2(1):5.10.1007/s44245-023-00012-9 ↗
16. Das A, Li D, Williams D, Greenwood D. Joining technologies for automotive battery systems manufacturing. World Electric Vehicle J. 2018;9(2):22.10.3390/wevj9020022 ↗
17. Kalich J, Matzke M, Pfeiffer W, Schlegel S, Kornhuber L, Füssel U. Long-term behavior of clinched electrical contacts. Metals. 2022;12(10):1651.10.3390/met12101651 ↗
18. Reichel A, Sampaio RFV, Pragana JPM, Bragança IMF, Silva CMA, Martins PAF. Form-fit joining of hybrid busbars using a flexible tool demonstrator. Proc Inst Mech Eng Part L J Mater Design Appl. 2021;236(6):1164–75.
19. Sapage MST, Pragana JPM, Sampaio RFV, Bragança IMF, Silva CMA, Martins PAF. Multi-planar injection lap riveting. J Adv Join Proc. 2024;9:100175.
20. Ferreira FR, Pragana JPM, Bragança IMF, Silva CMA, Martins PAF. Injection lap riveting. CIRP Ann. 2021;70(1):261–4.10.1016/j.cirp.2021.03.018 ↗
21. Pragana JPM, Sampaio RFV, Chantreuil J, Bragança IMF, Silva CMA, Martins PAF. Double-sided injection lap riveting. Int J Adv Manuf Technol. 2023;125(7–8):3241–53.10.1007/s00170-023-10941-0 ↗
22. Kasaei MM, da Silva LF. Joining sheets made from dissimilar materials by hole hemming. Proc Instit Mech Eng Part L J Mater Design Appl. 2022;236(6):1321–32.
23. Kasaei MM, Pereira JA, Carbas RJ, Marques EA, da Silva LF. Ductile fracture prediction in hole hemming of aluminum and magnesium sheets. Metals. 2023;13(9):1559.10.3390/met13091559 ↗
24. Kasaei MM, Carbas RJC, Marques EAS, da Silva LFM. A novel joining technology for metal and polymer sheets. J Adv Join Proc. 2024;9:100184.
25. Haran-Nogueira A, et al. Development of hybrid bonded-hole hemmed joints: Process design and joint characterization. J Manuf Process. 2023;95:479–91.10.1016/j.jmapro.2023.04.033 ↗
26. Haran-Nogueira A, Kasaei MM, Akhavan-Safar A, Carbas RJC, Marques EAS, da Silva LFM. Failure analysis of hybrid bonded-hole hemmed joints for dissimilar materials. Thin-Wall Struct. 2023;189:110907.10.1016/j.tws.2023.110907 ↗
27. Zhao J, Feng X, Tran M-K, Fowler M, Ouyang M, Burke AF. Battery safety: fault diagnosis from laboratory to real world. J Power Sourc. 2024;598:234111.10.1016/j.jpowsour.2024.234111 ↗
28. Goswami BR, Abdisobbouhi Y, Du H, Mashayek F, Kingston TA, Yurkiv V. Advancing battery safety: integrating multiphysics and machine learning for thermal runaway prediction in lithium-ion battery module. J Power Sourc. 2024;614:235015.10.1016/j.jpowsour.2024.235015 ↗
29. Zhao Y, et al. Sealing performance and joining mechanism of magnetic pulse welded joints on 3003 AI prismatic cell container for battery applications. Arch Civil Mech Eng. 2024;24(4):224.10.1007/s43452-024-01036-y ↗
30. Schaeffler S, Jossen A. In situ measurement and modeling of internal thermal runaway propagation within lithium-ion cells under local overheating conditions. J Power Source. 2024;614:234968.10.1016/j.jpowsour.2024.234968 ↗
31. Jia Y, Brancato L, Giglio M, Cadini F. Temperature enhanced early detection of internal short circuits in lithium-ion batteries using an extended Kalman filter. J Power Source. 2024;591:233874.10.1016/j.jpowsour.2023.233874 ↗
32. Pistorio F, Clerici D, Mocera F, Somà A. Review on the numerical modeling of fracture in active materials for lithium ion batteries. J Power Source. 2023;566:232875.10.1016/j.jpowsour.2023.232875 ↗
33. Pereira JAC, Kasaei MM, Carbas RJC, Marques EAS, Lim H, da Silva LFM. Joining magnesium and aluminum alloy sheets by a novel hole hemming process. Thin-Walled Struct. 2023;187:110758.10.1016/j.tws.2023.110758 ↗
34. da Silva BFA, Kasaei MM, Akhavan-Safar A, Carbas RJC, Marques EAS, da Silva LFM. Failure behavior of hole hemmed joints with a novel configuration for hybrid busbars in electric vehicle batteries. Eng Fail Anal. 2025;167:109019.10.1016/j.engfailanal.2024.109019 ↗
35. Conceição AGC, Kasaei MM, Carbas RJC, Marques EAS, da Silva LFM. A flexible tool for joining dissimilar materials by the novel hole hemming process. Mech Based Design Struct Mach. 2023. https://doi.org/10.1080/15397734.2023.2197041.10.1080/15397734.2023.2197041 ↗
36. Kasaei MM, Carbas RJC, Marques EAS, da Silva LFM. Advanced Materials Modelling in Joining by Plastic Deformation. In: Altenbach H, Öchsner A, editors. State of the Art and Future Trends in Materials Modelling 2. Cham: Springer; 2024. p. 343–80.10.1007/978-3-031-72900-3_18 ↗
37. Firouzjaei MK, Naeini HM, Kasaei MM, Mirnia MJ, da Silva LFM. A microscale constitutive model for thin stainless steel sheets considering size effect. Proc Instit Mech Eng Part L J Mater Design Appl. 2023;237(10):2104–14.
38. Paul SK. A physics-based defect tolerant design approach to predict the tensile performance of aluminium alloys with a defect. Theore Appl Fract Mech. 2023;127:104033.10.1016/j.tafmec.2023.104033 ↗
39. Pham Q-T, Lee B-H, Park K-C, Kim Y-S. Influence of the post-necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets. Int J Mech Sci. 2018;140:521–36.10.1016/j.ijmecsci.2018.02.040 ↗
40. Xu T, Li F, Wang X, Zhang G. Modeling anisotropic ductile fracture of AA7075-T6 sheet for sheet metal forming considering anisotropic stress state. Theor Appl Fract Mech. 2022;122:103610.10.1016/j.tafmec.2022.103610 ↗
41. Qian L, Xu S, Li H, Zhou Y, Sun C, Ma T. Influences of stress states and loading directions on the anisotropic fracture of magnesium alloy AZ31B sheet under tension-dominated forming conditions. Arch Civil Mech Eng. 2022;22(4):213.10.1007/s43452-022-00535-0 ↗
42. Pham QT, Lee MG, Kim YS. New procedure for determining the strain hardening behavior of sheet metals at large strains using the curve fitting method. Mech Mater. 2021;154:103729.10.1016/j.mechmat.2020.103729 ↗
43. Yasnikov IS, Vinogradov A, Estrin Y. Revisiting the Considère criterion from the viewpoint of dislocation theory fundamentals. Scripta Mater. 2014;76:37–40.10.1016/j.scriptamat.2013.12.009 ↗
44. Zheng L, Wang Z, Wan M, Meng B. Prediction of forming limit for sheet metals between equi-biaxial tension and uniaxial tension using a new ductile fracture criterion. Arch Civil Mech Eng. 2023;23(4):239.10.1007/s43452-023-00780-x ↗
45. Qian L, Du J, Li P, Ma T, Zhou Y, Sun C. Fracture prediction of high-strength steel sheet during in-plane compression-shear forming under negative stress triaxiality. Arch Civil Mech Eng. 2024;24(2):60.10.1007/s43452-023-00857-7 ↗
46. Beese AM, Luo M, Li Y, Bai Y, Wierzbicki T. Partially coupled anisotropic fracture model for aluminum sheets. Eng Fract Mech. 2010;77(7):1128–52.10.1016/j.engfracmech.2010.02.024 ↗
47. Mirnia MJ, Vahdani M. Calibration of ductile fracture criterion from shear to equibiaxial tension using hydraulic bulge test. J Mater Proc Technol. 2020;280:116589.10.1016/j.jmatprotec.2020.116589 ↗
48. Bai Y, Wierzbicki T. Application of extended Mohr-Coulomb criterion to ductile fracture. Int J Fract. 2009;161(1):1–20.10.1007/s10704-009-9422-8 ↗
49. Firouzjaei MK, Naeini HM, Kasaei MM, Mirnia MJ, da Silva LF. Microscale modeling of the ductile fracture behavior of thin stainless steel sheets. Thin-Walled Structures. 2024;196:111457.10.1016/j.tws.2023.111457 ↗
50. da Silva BFA, Kasaei MM, Akhavan-Safar A, Carbas RJC, Marques EAS, da Silva LFM. Fatigue analysis of novel hole hemmed joints for hybrid busbars in electric vehicle batteries. Eng Fract Mech. 2024;311:110590.10.1016/j.engfracmech.2024.110590 ↗
51. Sampaio RFV, Pragana JPM, Bragança IMF, Silva CMA, Martins PAF. Thermo-electrical performance of hybrid busbars: An experimental and numerical investigation. Proc Instit Mech Eng Part L J Mater Design Appl. 2022;237(1):70–80.