journal article·2022-03-02

AA5052 failure prediction of electromagnetic flanging process using a combined fracture model

Huakun Deng, Yunfei Mao, Guangyao Li, Xu Zhang, Junjia Cui

Publisher page

Abstract

Electromagnetic forming process could significantly increase the forming limit of aluminum alloy. However, high-speed fracture prediction of aluminum alloys is a major problem in the development of electromagnetic flanging process. In this study, notched specimen tensile tests with high-speed Digital Image Correlation system were conducted under the strain rate range from 0.001 to 100 s−1. A fracture model of AA5052 alloys which combined of an uncoupled fracture model, Gissmo damage evolution model and Johnson–Cook strain rate effect was established. Electromagnetic flanging experiments were conducted to verify the failure criteria effectiveness. Results showed that failure strain was significantly influenced by strain rate under various loading path. Compared with the experiments, the percentage error of established electromagnetic flanging process FEM model was less than 4%. The fracture model established could well predict notched specimen high-speed failure, and also accurately predict sheet failure model of electromagnetic flanging experiments and, thus, verified the effectiveness of the established dynamic failure criteria in electromagnetic flanging process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Tisza M, Czinege I. Comparative study of the application of steels and aluminium in lightweight production of automotive parts. Int J Lightw Mater Manuf. 2018;1:229–38.
2. Psyk V, Risch D, Kinsey BL, Tekkayaa AE, Kleinera M. Electromagnetic forming—a review. J Mater Process Technol. 2011;211:787–829.10.1016/j.jmatprotec.2010.12.012 ↗
3. Su H, Huang L, Li J, Ma F, Huang P, Feng F. Two-step electromagnetic forming: a new forming approach to local features of large-size sheet metal parts. Int J Mach Tools Manuf. 2018;124:99–116.10.1016/j.ijmachtools.2017.10.005 ↗
4. Li J, Qiu W, Huang L, Su H, Tao H, Li P. Gradient electromagnetic forming (GEMF): a new forming approach for variable-diameter tubes by use of sectional coil. Int J Mach Tools Manuf. 2018;135:65–77.10.1016/j.ijmachtools.2018.08.005 ↗
5. Zhang X, Zhang M, Sun L, Li C. Numerical simulation and experimental investigations on TA1 titanium alloy rivet in electromagnetic riveting. Arch Civil Mech Eng. 2018;18:887–901.10.1016/j.acme.2018.01.003 ↗
6. Gronostajski Z, Pater Z, Madej L, et al. Recent development trends in metal forming. Arch Civil Mech Eng. 2019;19:898–941.10.1016/j.acme.2019.04.005 ↗
7. Imbert JM, Winkler SL, Worswick MJ, Oliveira DA, Golovashchenko S. The effect of tool-sheet interaction on damage evolution in electromagnetic forming of aluminum alloy sheet. J Eng Mater Technol. 2005;127:145–53.10.1115/1.1839212 ↗
8. Kim SB, Huh H, Bok HH, Moon MB. Forming limit diagram of auto-body steel sheets for high-speed sheet metal forming. J Mater Process Technol. 2011;211:851–62.10.1016/j.jmatprotec.2010.01.006 ↗
9. Velmanirajan K, Anuradha K, Thaheer ASA, Narayanasamy R, Madhavan R, Suwas S. Experimental investigation of forming limit, void coalescence and crystallographic textures of aluminum alloy 8011 sheet annealed at various temperatures. Arch Civil Mech Eng. 2014;14:398–416.10.1016/j.acme.2013.10.009 ↗
10. Mirfalahnasiri SM, Basti A, Hashemi R. Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate. Int J Mech Sci. 2016;117:93–101.10.1016/j.ijmecsci.2016.08.011 ↗
11. Nasiri SM, Basti A, Hashemi R, Darvizeh A. Effects of normal and through-thickness shear stresses on the forming limit curves of AA3104-H19 using advanced yield criteria. Int J Mech Sci. 2018;137:15–23.10.1016/j.ijmecsci.2018.01.009 ↗
12. Pham Q, Lee B, Park K, Kim Y. Influence of the post-necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets. Int J Mech Sci. 2018;140:521–36.10.1016/j.ijmecsci.2018.02.040 ↗
13. Li H, Fu MW, Lu J, Yang H. Ductile fracture: experiments and computations. Int J Plast. 2011;27:147–80.10.1016/j.ijplas.2010.04.001 ↗
14. Majzoobi GH, Kashfi M, Bonora N, Iannitti G, Ruggiero A, Khademi E. Damage characterization of aluminum 2024 thin sheet for different stress triaxialities. Arch Civil Mech Eng. 2018;18:702–12.10.1016/j.acme.2017.11.003 ↗
15. Johnson GR, Cook WH. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech. 1985;21:31–48.10.1016/0013-7944(85)90052-9 ↗
16. Wierzbicki T, Bao Y, Lee YW, Bai Y. Calibration and evaluation of seven fracture models. Int J Mech Sci. 2005;47:719–43.10.1016/j.ijmecsci.2005.03.003 ↗
17. Liang X. Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading. Int J Solids Struct. 2007;44:5163–81.10.1016/j.ijsolstr.2006.12.026 ↗
18. Bai Y, Wierzbicki T. A new model of metal plasticity and fracture with pressure and Lode dependence. Int J Plast. 2008;24:1071–96.10.1016/j.ijplas.2007.09.004 ↗
19. Lou Y, Chen L, Clausmeyer T, Tekkaya AE, Yoon JW. Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals. Int J Sol Struct. 2017;112:169–84.10.1016/j.ijsolstr.2016.11.034 ↗
20. Andrade FXC, Feucht M, Haufe A, Neukamm F. An incremental stress state dependent damage model for ductile failure prediction. Int J Fract. 2016;200:127–50.10.1007/s10704-016-0081-2 ↗
21. Cronin DS, Bui K, Kaufmann C, McIntosh G, Berstad T, Cronin D. Implementation and validation of the Johnson–Holmquist ceramic material model in LS-Dyna. In: 4th European LS-dyna users conference. 2003. https://www.dynalook.com/conferences/european-conf-2003/implementation-and-validation-of-the-johnson.pdf. Accessed 2003.
22. Andrade F, Feucht M, Haufe A. On the prediction of material failure in LS-DYNA: A comparison between GISSMO and DIEM. In: Proceedings of the 13th International LS-DYNA Users Conference, Detroit, USA. 2014. https://www.dynalook.com/conferences/13th-international-ls-dyna-conference/constitutive-modeling/on-the-prediction-of-material-failure-in-ls-dyna-r-a-comparison-between-gissmo-and-diem. Accessed 2014.
23. Liang B, Zhao Y, Zhao Q, Fan T, Li Y. On the prediction of failure in 6016 aluminum alloy sheet by gissmo damage model. Chin J Mech Eng. 2019;55:53–62.10.3901/JME.2019.18.053 ↗
24. Deng H, Yang S, Li G, Zhang X, Cui J. Novel method for testing the high strain rate tensile behavior of aluminum alloys. J Mat Process Technol. 2020;280:116601.10.1016/j.jmatprotec.2020.116601 ↗