Analysis of vane loads and motion in a hydraulic double vane pump with integrated electrical drive
Source abstract
Abstract
Abstract In this paper, the results of the analysis of the forces acting on vanes in a double-acting vane pump with an integrated electric drive have been presented. In the new motor pump unit, the pump is assembled inside the rotor of the electric motor. A dynamic model representing the vane movement has been developed considering the impact of pressure load distribution, vane support forces and friction forces. The loss of contact between the vane head and the cam ring lead to the noise and reduction of the volumetric pump efficiency. The dynamic model which describes the vane motion and contact between the vane tip and cam ring has been solved using MATLAB software. The influence of load distribution, pump design and operational parameters on the vane dynamics has been analysed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydraulic and Pneumatic Systems · Mechanical Engineering and Vibrations Research · Mechanical Systems and Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Fiebig W, Cependa P, Jędraszczyk P, Kuczwara H. Innovative solution of an integrated motor pump assembly. ASME Symposium on Fluid Power and Motion Control, Sarasota, FL, USA (2017)10.1115/FPMC2017-4277 ↗
2. Inaguma Y. Theoretical analysis of mechanical efficiency in vane pump. JTEKT Eng J Eng Ed. 2010;1007E:28–35.
3. Inaguma Y. Friction characteristics of vane for a balanced vane pump. Jpn Fluid Power Syst Soc. 2014;45(4):58–65.10.5739/jfps.45.58 ↗
4. Inaguma Y, Hibi A. Vane pump theory for mechanical efficiency. Proc Inst Mech Eng Part C J Mech Eng Sci. 2005;219(11):1269–78.10.1243/095440605X32002 ↗
5. Elashmawy M. Theoretical investigation of friction forces between vane tip and cam-ring in oil vane pumps. Int J Sci Technol Soc. 2014;2(5):121–8.10.11648/j.ijsts.20140205.15 ↗
6. Ashmawy MEL, Murrenhoff H. Experimental investigation of friction force between vane tip and cam-ring in oil vane pumps. Int J Fluid Power. 2009;10(1):37–46.10.1080/14399776.2009.10780966 ↗
7. Faber I. Theoretische und experimentelle Untersuchung der Flügelkopfreibung in einer Flügelzellenpumpe. Diss. TU Bochum. 2005
8. Ortwig H. Analytische und experimentelle Untersuchung hochbelasteter linienförmiger Gleitkontakte in einer Flügelzellenpumpe, Diss. RWTH Aachen. 1990
9. Wasel M, Abdel-Rahim A, El-Gohary H, Elashmawy M. Theoretical study of the parameters affecting vane tip friction in oil vane pumps using simplified Tehl-model. Int J Sci Technol. 2015;3:60–70.
10. Cho IS, Oh SH, Song KK, et al. The Lubrication characteristics of the vane tip under pressure boundary condition of oil hydraulic vane pump. J Mech Sci Technol. 2006;20(10):1716–21.10.1007/BF02916275 ↗
11. Mucchi E, Agazzi A, D’Elia G, et al. On the wear and lubrication regime in variable displacement vane pumps. Wear. 2013;306(1–2):36–46.10.1016/j.wear.2013.06.025 ↗
12. Alghamdi A, Elashmawy M. Vane geometry effect on lubrication conditions between vane tip and cam-ring in hydraulic vane machines. Int J Mech Eng Appl. 2014;3(1):1–10.
13. Frendo F, Novi N, Squarcini R. Numerical and experimental analysis of variable displacement vane pumps. International conference on tribology. 20–22 September 2006, Parma, Italy. 2006
14. Rundo M., Altare G. (2017). Lumped parameter and three-dimensional CFD simulation of a variable displacement vane pump for engine lubrication. Proceedings of the ASME 2017 fluids engineering division summer meeting10.1115/FEDSM2017-69124 ↗
15. Suzuki K, Nakamura Y, et al. Characteristics Prediction of Vane Pump by CFD Analysis. KYB Tech Rev. 2016;53:8–15.
16. Heisel U, Fiebig W. Betrachtungen zum dynamischen Verhalten von druckgeregelten Fluegelzellenpumpen. Oelhydraulik und Pneumatik. 1990;34(6):429–32.
17. Heisel U, Fiebig W, Matten N. Untersuchungen zum Fluegelverhalten von Druckgeregelten Fluegelzellenpumpen. Oelhydraulik und Pneumatik. 1992;36(2):102–10.
18. Cho MR, Han DC. Vane tip detachment in a positive displacement vane pump. KSME Int J. 1998;12(5):881–7.10.1007/BF02945555 ↗
19. Fiebig W, Dudzikowski I, Ciurys M, Kuczwara H. A vane pump integrated with an electric motor. The 9th international fluid power conference, 9. IFK, March 24–26, Aachen, Germany. 2014
20. Heisel U, Fiebig W, Matten N. Druckwechselvorgänge in druckgeregelten Flüelzellenpumpen. Oelhydraulik und Pneumatik. 1991;35(12):906–13.
21. Cavallari M. A lumped parameter model for the pressure and vibration analysis of variable displacement vane pumps, Universita degli Studi di Ferrara. 2011
22. Dowson D, Higginson GR. Elasto-hydrodynamic Lubrication. London: Pergamon Press; 1997.
23. Wen S, Huang P, Tian Y, Liran M. Principles of Tribology. 5th ed. Beijing: Tsinghua University Press; 2018.
24. Cameron A (1966) Principles of lubrication. lmgmans Green, London
25. Totten GE. Handbook of lubrication and tribology. In: Application and maintenance, vol. I. Routledge: Taylor and Francis Group; 2006.
26. Eschmann P, Hasbargen L, Weigand K. Waezlager-praxis. Munich: Oldenlmrg-Verlag; 1979.
27. Wei SL, Wang Z, Ji H. Effects of shape of vane on force of vane in high pressure vane pump. Proceedings of the 2011 international conference on fluid power and mechatronics, 2011