Microstructure, surface topography and sliding wear behaviour of titanium based coating on AISI 1040 steel by magnetron sputtering
Source abstract
Abstract
Abstract In the present study, 2% B 4 C reinforced with Ti–6Al–4V composite coatings on AISI 1040 steel plates were coated using magnetron sputtering. The microstructure and surface morphologies of the coated specimen were analyzed using SEM, XRD, EDS and AFM. The uniform coating thickness of 75 nm and 110 nm on smooth surfaces have been obtained for 0.5 h and 1 h coating time respectively. Under the normal load of 2 N and 3 N, Ti–Al–V–B 4 C coatings wear analysis were performed and resulted in excellent wear rate with lower coefficient of friction. Ti–Al–V–B 4 C thin film shows the nano hardness value of 7.2 GPa and 9.7 GPa for 0.5 h and 1 h coating time and elastic modulus of 204 GPa. The surface roughness ( R a ) of 0.5 h and 1 h coating are 3.393 nm and 17.433 nm respectively. The addition of B 4 C particles reinforced Ti–Al–V composite coatings showed enhanced nano hardness and improved the wear resistance with decrease in the coefficient of friction. The amount of heat generated during wear test has been calculated. Ti–Al–V–B 4 C composite coatings were exposed to lowest wear rates among all loading conditions and thus signifying that it could be a promising alternative to other hard coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.