Corrosion behaviour of Al5254 alloy with tantalum addition processed by powder bed fusion–laser beam
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Magnesium Alloys: Properties and Applications · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Kharal SP, Jones NJ, Petculescu G. Sensitization of 5xxx Series Aluminum Alloys Explored with an Adapted Johnson-Mehl-Avrami-Kolmogorov Model for Phase Evolution and Ultrasonics. Corrosion. 2025;81:172–81. https://doi.org/10.5006/4649.10.5006/4649 ↗
2. Du Plessis A, MacDonald E, Waller JM, Berto F Non-destructive testing of parts produced by laser powder bed fusion. Fundam Laser Powder Bed Fusion Met. 2021;277–300. . https://doi.org/10.1016/B978-0-12-824090-8.00016-0.10.1016/B978-0-12-824090-8.00016-0 ↗
3. Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS. The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016;61:315–60. https://doi.org/10.1080/09506608.2015.1116649.10.1080/09506608.2015.1116649 ↗
4. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM. 3D printing of high-strength aluminium alloys. Nature. 2017;549:365–9. https://doi.org/10.1038/nature23894.10.1038/nature23894 ↗
5. Kaufmann N, Imran M, Wischeropp TM, Emmelmann C, Siddique S, Walther F. Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM). Phys Procedia. 2016;83:918–26. https://doi.org/10.1016/j.phpro.2016.08.096.10.1016/j.phpro.2016.08.096 ↗
6. Zhang H, Zhu H, Qi T, Hu Z, Zeng X. Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties. Mater Sci Eng A. 2016;656:47–54. https://doi.org/10.1016/j.msea.2015.12.101.10.1016/j.msea.2015.12.101 ↗
7. Nagaumi H, Xue GX, Zhang ZZ, Ma YL. Effect of Contraction Behaviors during Solidification of 7xxx Aluminum Alloys on Hot Tearing Susceptibility. Mater Sci Forum. 2014;783–786:300–6. https://doi.org/10.4028/www.scientific.net/MSF.783-786.300.10.4028/www.scientific.net/MSF.783-786.300 ↗
8. Liang K-Y, Huang H-C, Tseng C-Y, Chen M-C, Lee S-L, Lin C-C, et al. Effects of Fe, Si, Cu, and TiB2 Grain Refiner Amounts on the Hot Tearing Susceptibility of 5083, 6061, and 7075 Aluminum Ingots. Met (Basel). 2023;14:15. https://doi.org/10.3390/met14010015.10.3390/met14010015 ↗
9. Giansante E, Timelli G, Fabrizi A Impact of chemical composition on hot tearing in secondary wrought aluminum alloys. Detritus. 2024. . https://doi.org/10.31025/2611-4135/2024.19432.10.31025/2611-4135/2024.19432 ↗
10. Chen L-Y, Qin P, Zhang L, Zhang L-C. An overview of additively manufactured metal matrix composites: preparation, performance, and challenge. Int J Extrem Manuf. 2024;6:052006. https://doi.org/10.1088/2631-7990/ad54a4.10.1088/2631-7990/ad54a4 ↗
11. Zhou L, Hyer H, Chang J, Mehta A, Huynh T, Yang Y, et al. Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition. Mater Sci Eng A. 2021;823:141679. https://doi.org/10.1016/j.msea.2021.141679.10.1016/j.msea.2021.141679 ↗
12. Stopyra W, Smolina I, Grochowska E, Kobiela K, Karoluk M, Kasprowicz M, et al. Nanoalloyed Al5254 alloy manufactured by powder bed fusion–laser beam: microstructure and mechanical properties analysis. Prog Addit Manuf. 2025;10:1701–6. https://doi.org/10.1007/s40964-024-00940-2.10.1007/s40964-024-00940-2 ↗
13. Pollock TM, Clarke AJ, Babu SS. Design and Tailoring of Alloys for Additive Manufacturing. Metall Mater Trans A. 2020;51:6000–19. https://doi.org/10.1007/s11661-020-06009-3.10.1007/s11661-020-06009-3 ↗
14. Aballe A, Bethencourt M, Botana FJ, Cano MJ, Marcos M. Influence of the cathodic intermetallics distribution on the reproducibility of the electrochemical measurements on AA5083 alloy in NaCl solutions. Corros Sci. 2003;45:161–80. https://doi.org/10.1016/S0010-938X(02)00067-7.10.1016/S0010-938X(02)00067-7 ↗
15. 5 xxx Aluminum Alloy Datasheets. Prop. Sel. Alum. Alloy., ASM International. 2019, pp. 347–347. https://doi.org/10.31399/asm.hb.v02b.a000670710.31399/asm.hb.v02b.a0006707 ↗
16. Zhou W, Xue F, Li M. Corrosion Behavior of Al-Mg Alloys with Different Alloying Element Contents in 3.5% NaCl Solution. Met (Basel). 2025;15:327. https://doi.org/10.3390/met15030327.10.3390/met15030327 ↗
17. Irving B. Welding the four most popular aluminum alloys. Weld J (Miami Fla). 1994;73:51–5.
18. Gupta S, Singh D, Yadav A, Jain S, Pratap B. A comparative study of 5083 aluminium alloy and 316L stainless steel for shipbuilding material. Mater Today Proc. 2020;28:2358–63. https://doi.org/10.1016/j.matpr.2020.04.641.10.1016/j.matpr.2020.04.641 ↗
19. Zhang S, van Dijk N, van der Zwaag S. A Review of Self-healing Metals: Fundamentals, Design Principles and Performance. Acta Metall Sin (English Lett. 2020;33:1167–79. https://doi.org/10.1007/s40195-020-01102-3.10.1007/s40195-020-01102-3 ↗
20. Ahuir-Torres JI, Gibbons GJ, West G, Das A, Kotadia HR. Understanding the corrosion behaviour of Al-Mg alloy fabricated using a Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) process. J Alloys Compd. 2023;969:172300. https://doi.org/10.1016/j.jallcom.2023.172300.10.1016/j.jallcom.2023.172300 ↗
21. Summers P, Lattimer B, Case S. Residual Constitutive Behavior of Aluminum Alloys after Fire Exposure. Fire Saf Sci. 2014;11:612–25. https://doi.org/10.3801/IAFSS.FSS.11-612.10.3801/IAFSS.FSS.11-612 ↗
22. Guan R, Lou H, Huang H, Liang X, Xiao X, Li H, et al. Development of Aluminum Alloy Materials: Current Status, Trend, and Prospects. Chin J Eng Sci. 2020;22:68. https://doi.org/10.15302/J-SSCAE-2020.05.013.10.15302/J-SSCAE-2020.05.013 ↗
23. Castro-Sastre MÁ, García-Cabezón C, Fernández-Abia AI, Martín-Pedrosa F, Barreiro J. Comparative Study on Microstructure and Corrosion Resistance of Al-Si Alloy Cast from Sand Mold and Binder Jetting Mold. Met (Basel). 2021;11:1421. https://doi.org/10.3390/met11091421.10.3390/met11091421 ↗
24. Cabrini M, Lorenzi S, Pastore T, Testa C, Manfredi D, Lorusso M, et al. Corrosion behavior of AlSi10Mg alloy produced by laser powder bed fusion under chloride exposure. Corros Sci. 2019;152:101–8. https://doi.org/10.1016/j.corsci.2019.03.010.10.1016/j.corsci.2019.03.010 ↗
25. Nkoua C, Josse C, Proietti A, Basseguy R, Blanc C. Corrosion behaviour of the microbially modified surface of 5083 aluminium alloy. Corros Sci. 2023;210:110812. https://doi.org/10.1016/j.corsci.2022.110812.10.1016/j.corsci.2022.110812 ↗
26. Anderson K, Weritz J, Kaufman Gilbert J. 5254: Higher-Purity Al-Mg-Cr Alloy. Prop. Sel. Alum. Alloy., ASM International; 2019, pp. 363–4. https://doi.org/10.31399/asm.hb.v02b.a000670110.31399/asm.hb.v02b.a0006701 ↗
27. Palanisamy G, Corrosion, Inhibitors. Corros Inhib. 2019;1–24. https://doi.org/10.5772/intechopen.80542.10.5772/intechopen.80542 ↗
28. Birbilis N, Buchheit RG. Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys. J Electrochem Soc. 2005;152:B140. https://doi.org/10.1149/1.1869984.10.1149/1.1869984 ↗
29. Yasakau KA, Zheludkevich ML, Lamaka SV, Ferreira MGS. Role of intermetallic phases in localized corrosion of AA5083. Electrochim Acta. 2007;52:7651–9. https://doi.org/10.1016/j.electacta.2006.12.072.10.1016/j.electacta.2006.12.072 ↗
30. Sander G, Tan J, Balan P, Gharbi O, Feenstra DR, Singer L, et al. Corrosion of Additively Manufactured Alloys: A Review. Corrosion. 2018;74:1318–50. https://doi.org/10.5006/2926.10.5006/2926 ↗
31. Gharbi O, Jiang D, Feenstra DR, Kairy SK, Wu Y, Hutchinson CR, et al. On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting. Corros Sci. 2018;143:93–106. https://doi.org/10.1016/j.corsci.2018.08.019.10.1016/j.corsci.2018.08.019 ↗
32. Yan J, Heckman NM, Velasco L, Hodge AM. Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries. Sci Rep. 2016;6:26870. https://doi.org/10.1038/srep26870.10.1038/srep26870 ↗
33. Guillaumin V, Mankowski G. Localized corrosion of 6056 T6 aluminium alloy in chloride media. Corros Sci. 2000;42:105–25. https://doi.org/10.1016/S0010-938X(99)00053-0.10.1016/S0010-938X(99)00053-0 ↗
34. Aboulkhair NT, Everitt NM, Ashcroft I, Tuck C. Reducing porosity in AlSi10Mg parts processed by selective laser melting. Addit Manuf. 2014;1–4:77–86. https://doi.org/10.1016/j.addma.2014.08.001.10.1016/j.addma.2014.08.001 ↗
35. Xiao R, Zhang X. Problems and issues in laser beam welding of aluminum–lithium alloys. J Manuf Process. 2014;16:166–75. https://doi.org/10.1016/j.jmapro.2013.10.005.10.1016/j.jmapro.2013.10.005 ↗
36. Huang B, Tang H, Huang J, Jia Y, Liao L, Pang S, et al. Influence of Laser-Based Powder Bed Fusion of Metals Process Parameters on the Formation of Defects in Al-Zn-Mg-Cu Alloy Using Path Analysis. Micromachines. 2024;15:1121. https://doi.org/10.3390/mi15091121.10.3390/mi15091121 ↗
37. Giovagnoli M, Silvi G, Merlin M, Di Giovanni MT. Optimisation of process parameters for an additively manufactured AlSi10Mg alloy: Limitations of the energy density-based approach on porosity and mechanical properties estimation. Mater Sci Eng A. 2021;802:140613. https://doi.org/10.1016/j.msea.2020.140613.10.1016/j.msea.2020.140613 ↗
38. Bayat M, Thanki A, Mohanty S, Witvrouw A, Yang S, Thorborg J, et al. Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation. Addit Manuf. 2019;30:100835. https://doi.org/10.1016/j.addma.2019.100835.10.1016/j.addma.2019.100835 ↗
39. Martin AA, Calta NP, Khairallah SA, Wang J, Depond PJ, Fong AY et al. Dynamics of pore formation during laser powder bed fusion additive manufacturing. Nat Commun. 2019;10:1987. https://doi.org/10.1038/s41467-019-10009-210.1038/s41467-019-10009-2 ↗
40. Laieghi H, Kvvssn V, Butt MM, Ansari P, Salamci MU, Patterson AE, et al. Corrosion in laser powder bed fusion AlSi10Mg alloy. Eng Rep. 2024. . https://doi.org/10.1002/eng2.1298410.1002/eng2.12984 ↗
41. Örnek C. Additive manufacturing – a general corrosion perspective. Corros Eng Sci Technol. 2018;53:531–5. https://doi.org/10.1080/1478422X.2018.1511327.10.1080/1478422X.2018.1511327 ↗
42. Pezzato L, Dabalà M, Gross S, Brunelli K. Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings. Surf Coat Technol. 2020;404:126477. https://doi.org/10.1016/j.surfcoat.2020.126477.10.1016/j.surfcoat.2020.126477 ↗
43. Revilla R, Verkens D, Rubben T, De Graeve I. Corrosion and Corrosion Protection of Additively Manufactured Aluminium Alloys—A. Crit Rev Mater (Basel). 2020;13:4804. https://doi.org/10.3390/ma13214804.10.3390/ma13214804 ↗
44. Chen H, Zhang C, Jia D, Wellmann D, Liu W. Corrosion Behaviors of Selective Laser Melted Aluminum Alloys: A Review. Met (Basel). 2020;10:102. https://doi.org/10.3390/met10010102.10.3390/met10010102 ↗
45. Wang Z, Wang X, Chen X, Qiu C. Complete columnar-to-equiaxed transition and significant grain refinement in an aluminium alloy by adding Nb particles through laser powder bed fusion. Addit Manuf. 2022;51:102615. https://doi.org/10.1016/j.addma.2022.102615.10.1016/j.addma.2022.102615 ↗
46. Michi RA, Plotkowski A, Shyam A, Dehoff RR, Babu SS. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing. Int Mater Rev. 2022;67:298–345. https://doi.org/10.1080/09506608.2021.1951580.10.1080/09506608.2021.1951580 ↗
47. Ding Y, Muñiz-Lerma JA, Trask M, Chou S, Walker A, Brochu M. Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys. MRS Bull. 2016;41:745–51. https://doi.org/10.1557/mrs.2016.214.10.1557/mrs.2016.214 ↗
48. Li X, Li D, Li G, Cai Q. Microstructure, mechanical properties, aging behavior, and corrosion resistance of a laser powder bed fusion fabricated Al–Zn–Mg–Cu–Ta alloy. Mater Sci Eng A. 2022;832:142364. https://doi.org/10.1016/j.msea.2021.142364.10.1016/j.msea.2021.142364 ↗
49. Bai Y, Yang Y, Xiao Z, Zhang M, Wang D. Process optimization and mechanical property evolution of AlSiMg0.75 by selective laser melting. Mater Des. 2018;140:257–66. https://doi.org/10.1016/j.matdes.2017.11.045.10.1016/j.matdes.2017.11.045 ↗
50. Pammer M, Pölzl J, Li J. Silicon Poisoning and Effects of Tantalum on AlSi Alloys. Met (Basel). 2023. https://doi.org/10.3390/met13121917. 13:1917.10.3390/met13121917 ↗
51. Song C-R, Dong B-X, Zhang S-Y, Yang H-Y, Liu L, Kang J, et al. Recent progress of Al–Mg alloys: Forming and preparation process, microstructure manipulation and application. J Mater Res Technol. 2024;31:3255–86. https://doi.org/10.1016/j.jmrt.2024.07.051.10.1016/j.jmrt.2024.07.051 ↗
52. Del Guercio G, Simonelli M. Increasing the build rate of high-strength aluminium alloys produced by laser powder bed fusion. Opt Laser Technol. 2023;161:109133. https://doi.org/10.1016/j.optlastec.2023.109133.10.1016/j.optlastec.2023.109133 ↗
53. Fan Z, Gao F, Wang Y, Men H, Zhou L. Effect of solutes on grain refinement. Prog Mater Sci. 2022;123:100809. https://doi.org/10.1016/j.pmatsci.2021.100809.10.1016/j.pmatsci.2021.100809 ↗
54. Last HR, Garrett RK. Mechanical behavior and properties of mechanically alloyed aluminum alloys. Metall Mater Trans A. 1996;27:737–45. https://doi.org/10.1007/BF02648961.10.1007/BF02648961 ↗
55. Liu J, Huang Y, Liu W, Wang Y, Zhang Y, Ma Y. Effect of tantalum concentration on the microstructure and mechanical properties of novel W–Ta-Re alloy. Vacuum. 2023;207:111627. https://doi.org/10.1016/J.VACUUM.2022.111627.10.1016/J.VACUUM.2022.111627 ↗
56. Zhang DY, Fei QY, Zhao HM, Geng M, Zeng XC, Chu PK. Effects of tantalum ion implantation on the surface properties of Al–Mg alloy. Thin Solid Films. 2005;484:215–8. https://doi.org/10.1016/J.TSF.2005.02.002.10.1016/J.TSF.2005.02.002 ↗
57. Agrawal P, Gupta S, Thapliyal S, Shukla S, Haridas RS, Mishra RS. Additively manufactured novel Al-Cu-Sc-Zr alloy: Microstructure and mechanical properties. Addit Manuf. 2021;37:101623. https://doi.org/10.1016/j.addma.2020.101623.10.1016/j.addma.2020.101623 ↗
58. Tan Q, Zhang J, Sun Q, Fan Z, Li G, Yin Y, et al. Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles. Acta Mater. 2020;196:1–16. https://doi.org/10.1016/j.actamat.2020.06.026.10.1016/j.actamat.2020.06.026 ↗
59. Watanabe Y, Mihara-Narita M, Sato H. Grain Refinement of Cast Aluminum by Heterogeneous Nucleation Site Particles with High Lattice Matching. Mater Trans. 2023;64. https://doi.org/10.2320/matertrans.MT-L2022026. MT-L2022026.10.2320/matertrans.MT-L2022026 ↗
60. Guan R-G, Tie D. A Review on Grain Refinement of Aluminum Alloys: Progresses, Challenges and Prospects. Acta Metall Sin (English Lett. 2017;30:409–32. https://doi.org/10.1007/s40195-017-0565-8.10.1007/s40195-017-0565-8 ↗
61. Martucci A, Aversa A, Bondioli F, Fino P, Lombardi M. Synergic strategies to improve the PBF-LB\M processability of a cracking-sensitive alloy. Mater Des. 2022;224:111396. https://doi.org/10.1016/j.matdes.2022.111396.10.1016/j.matdes.2022.111396 ↗
62. Naeem M, Rehman AU, Romero Resendiz L, Salamci E, Aydin H, Ansari P, et al. Enhanced strength and ductility in an additively manufactured Al10SiMg alloy at cryogenic temperatures. Commun Mater. 2025;6:65. https://doi.org/10.1038/s43246-025-00793-4.10.1038/s43246-025-00793-4 ↗
63. Serrano-Munoz I, Mishurova T, Thiede T, Sprengel M, Kromm A, Nadammal N, et al. The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure. Sci Rep. 2020;10:14645. https://doi.org/10.1038/s41598-020-71112-9.10.1038/s41598-020-71112-9 ↗
64. Dobkowska A, Sotniczuk A, Bazarnik P, Mizera J, Garbacz H. Corrosion Behavior of Cold-Formed AA5754 Alloy Sheets. Mater (Basel). 2021;14:394. https://doi.org/10.3390/ma14020394.10.3390/ma14020394 ↗
65. Jin D, Li H, Yang C, Han Y, Zhu Z, Miao Y, et al. The Effects of Mg and Si Contents on the Microstructure and Solidification Behavior of Dilute Al-Mg-Si-Fe Alloys. JOM. 2023;75:4845–57. https://doi.org/10.1007/s11837-023-06128-3.10.1007/s11837-023-06128-3 ↗
66. Cabrera-Sierra R, Vazquez-Arenas J, Cardoso S, Luna-Sánchez RM, Trejo MA, Marín-Cruz J, et al. Analysis of the formation of Ta2O5 passive films in acid media through mechanistic modeling. Electrochim Acta. 2011;56:8040–7. https://doi.org/10.1016/j.electacta.2011.05.078.10.1016/j.electacta.2011.05.078 ↗
67. da Silva Batista B, Rodrigues SF, Cardoso JL, Rodrigues MVG, de Menezes AS, Santos-Oliveira R, et al. Tantalum’s role in the microstructure and its influence on corrosive behavior in Co-Cr-Ta alloy. J Alloys Compd. 2025;1010:177216. https://doi.org/10.1016/j.jallcom.2024.177216.10.1016/j.jallcom.2024.177216 ↗
68. Bösing I, La Mantia F, Thöming J. Modeling of electrochemical oxide film growth-a PDM refinement. Electrochim Acta. 2022;406:139847. https://doi.org/10.1016/j.electacta.2022.139847.10.1016/j.electacta.2022.139847 ↗
69. Sun Y, Tan X, Lan R, Ran G, Li J, Jiang Y. Mechanisms of inclusion-induced pitting of stainless steels: A review. J Mater Sci Technol. 2024;168:143–56. https://doi.org/10.1016/j.jmst.2023.06.008.10.1016/j.jmst.2023.06.008 ↗
70. Frankel GS. Pitting Corrosion of Metals: A Review of the Critical Factors. J Electrochem Soc. 1998;145:2186–98. https://doi.org/10.1149/1.1838615.10.1149/1.1838615 ↗
71. Liu P, Zhang Q-H, Watanabe Y, Shoji T, Cao F-H. A critical review of the recent advances in inclusion-triggered localized corrosion in steel. Npj Mater Degrad. 2022;6:81. https://doi.org/10.1038/s41529-022-00294-6.10.1038/s41529-022-00294-6 ↗