journal article·2026-01-16

Dynamic evolution of austenite/ferrite grain boundary structure during in-situ tensile deformation in dss 2205 duplex steel

Juan Li, Chuanlong Han, Qingyao Tang, Guanghui Zhao, Huaying Li

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Zhao G, Zhang R, Li J, Li H, Ma L, Li Y. Study on microstructure and tensile damage evolution of 2205 duplex steel at different solution temperatures. Mater Today Commun. 2022;33:104472.10.1016/j.mtcomm.2022.104472 ↗
2. Llorca-Isern N, López-Luque H, López-Jiménez I, Biezma MV. Identification of sigma and chi phases in duplex stainless steels. Mater Charact. 2016;112:20–9.10.1016/j.matchar.2015.12.004 ↗
3. Badji R, Bouabdallah M, Bacroix B, Kahloun C, Bettahar K, Kherrouba N. Effect of solution treatment temperature on the precipitation kinetic of σ-phase in 2205 duplex stainless steel welds. Mater Sci Eng A. 2008;496(1):447–54.10.1016/j.msea.2008.06.024 ↗
4. Gao L, Zhang X, Zha X, Zhang X. Effect of Mechanical Shock Treatment on Microstructure and Corrosion Properties of Manual Argon Arc Welding Joints of 2205 Duplex Stainless Steel. Materials. 2022;15(9):3230.10.3390/ma15093230 ↗
5. Xia Li, Jinhui W, Shulong Ye, Yinghao Z, Peng Yu. An investigation of the tensile deformation mechanism of a high-oxygen Ti2448 alloy fabricated by powder metallurgy by use of the in-situ EBSD method. Mater Sci Eng A. 2021;828:141981. https://doi.org/10.1016/j.msea.2021.141981.10.1016/j.msea.2021.141981 ↗
6. Qiang L, Jiangfeng S, Yuanding H, Bin J, Biquan X, Fusheng P. Comparison of edge cracking and tensile cracking in in-situ deformation at 150 °C of Mg-2Zn-1.5Mn alloy sheet. J Mater Sci Technol. 2022;112:24–35. https://doi.org/10.1016/j.jmst.2021.09.033.10.1016/j.jmst.2021.09.033 ↗
7. Zhao Q, Yang F, Torrens R, Bolzoni L. In-situ observation of the tensile deformation and fracture behaviour of powder-consolidated and as-cast metastable beta titanium alloys, Mater. Sci Eng, A. 2019;750:45–59.10.1016/j.msea.2019.02.037 ↗
8. Arniella V, Álvarez G, Belzunce J, Rodríguez C. Hydrogen embrittlement of 2205 duplex stainless steel in in-situ tensile tests. Theoretical and Applied Fracture Mecha. 2023;124:103794. https://doi.org/10.1016/j.tafmec.2023.103794. (ISSN 0167-8442).10.1016/j.tafmec.2023.103794 ↗
9. Gao W, Lu J, Zhou J, Liu Le, Wang J, Zhang Y, et al. Effect of grain size on deformation and fracture of Inconel718: an in-situ SEM-EBSD-DIC investigation. Mater Sci Eng, A. 2022;861:144361.10.1016/j.msea.2022.144361 ↗
10. Jia R, Zeng W, Zhao Z, Zhang P, Xu J, Wang Q. In-situ investigation on the deformation mechanism of duplex microstructure of a near α titanium alloy. J Alloys Compd. 2022;893:162184.10.1016/j.jallcom.2021.162184 ↗
11. Yin DD, Boehlert CJ, Long LJ, Huang GH, Zhou H, Zheng J, et al. Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg–Y sheets. Int J Plast. 2021;136:102878.10.1016/j.ijplas.2020.102878 ↗
12. Gao Y, Ding Y, Ma Y, Chen J, Wang X, Jiayu Xu. Evolution of annealing twins in Inconel 625 alloy during tensile loading, Materials Sci Eng: A, Volume 831. ISSN. 2022;142188:0921–5093. https://doi.org/10.1016/j.msea.2021.142188.10.1016/j.msea.2021.142188 ↗
13. Chen J, Furushima T. Effects of intergranular deformation incompatibility on stress state and fracture initiation at grain boundary: experiments and crystal plasticity simulations. Int J Plast. 2024;180:104052. https://doi.org/10.1016/j.ijplas.2024.104052.10.1016/j.ijplas.2024.104052 ↗
14. Yang B, Javier LLorca,. Origin of nucleation and growth of extension twins in grains unsuitably oriented for twinning during deformation of Mg-1%Al, Journal of Magnesium and Alloys, Volume 12(3). ISSN. 2024;1186–1203:2213–9567. https://doi.org/10.1016/j.jma.2024.02.013.10.1016/j.jma.2024.02.013 ↗
15. Wu Z, Liu S, Hasan MN, Li E, An X. The hot deformation behavior in austenite-ferrite heterostructured low density Fe-Mn-Al-C steel. Mater Today Commun. 2023;37:107184. https://doi.org/10.1016/j.mtcomm.2023.107184.10.1016/j.mtcomm.2023.107184 ↗
16. Liu Y, Jehanathan N, Yang H, Laeng J. SEM observation of the “orange peel effect” of materials. Mater Lett. 2007;61(6):1433–5. https://doi.org/10.1016/j.matlet.2006.07.045.10.1016/j.matlet.2006.07.045 ↗
17. Yang PQ, Zhang XP, Yao ZQ, Shivpuri R. Investigation on the crystal plasticity of α phase Ti-6Al-4V based on nano-indentation simulation and experiment. Mater Charact. 2023;203:113074. https://doi.org/10.1016/j.matchar.2023.113074.10.1016/j.matchar.2023.113074 ↗
18. Calcagnotto M, Ponge D, Demir E, Raabe D. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD, Materials Science and Engineering: A, Volume 527(10)11: pp. ISSN. 2010;2738–2746:0921–5093.
19. Liu X, Cao Z, Zhong Q, Ding Y, Li Y, Cao M, et al. In-situ TEM characterization of dislocation loops in tungsten under simultaneous helium and hydrogen irradiation. J Nucl Mater. 2024;598:155167. https://doi.org/10.1016/j.jnucmat.2024.155167.10.1016/j.jnucmat.2024.155167 ↗
20. Wang T, Qian L, Yu W, Li K, Zhang F, Meng J. Effect of ferrite-austenite morphology and orientation relationship on bainite transformation in low-alloy TRIP steels. Mater Charact. 2022;184:111656. https://doi.org/10.1016/j.matchar.2021.111656.10.1016/j.matchar.2021.111656 ↗
21. Haghdadi N, Cizek P, Hodgson PD, Tari V, Rohrer GS, Beladi H. Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel. Philos Mag. 2018;98(14):1284–306. https://doi.org/10.1080/14786435.2018.1434321.10.1080/14786435.2018.1434321 ↗
22. Xi T, Yin L, Yang CG, et al. Hot deformation behavior and processing map of a Cu-bearing 2205 duplex stainless steel. Acta Metallurgica Sinica (English Letters). 2019;32:1537–48. https://doi.org/10.1007/s40195-019-00910-6.10.1007/s40195-019-00910-6 ↗
23. Xia Yu, Hu P, Wang K-S, Li S-L, Xing H-R, Chang T, et al. Microstructure and texture evolution of pure molybdenum during hot deformation. Mater Charact. 2020;159:110010. https://doi.org/10.1016/j.matchar.2019.110010.10.1016/j.matchar.2019.110010 ↗
24. Guo R, Wang Q, Meng YingZe, Xu WenLong, Li G, Zhang Z, et al. Compressive stress and shear stress on the deformation mechanism of Mg–13Gd–4Y–2Zn–0.5Zr alloy at different deformation temperatures. J Market Res. 2022;18:1802–21. https://doi.org/10.1016/j.jmrt.2022.03.052.10.1016/j.jmrt.2022.03.052 ↗
25. Yue R, Zhu R, Chen J, et al. Revealing the activation of the slip system of polycrystalline Zinc by slip trace analysis. J of Materi Eng and Perform. 2025. https://doi.org/10.1007/s11665-025-11353-9.10.1007/s11665-025-11353-9 ↗
26. Weinberger CR, Boyce BL, Battaile CC. Slip planes in bcc transition metals. Int Mater Rev. 2013;58:296–314.10.1179/1743280412Y.0000000015 ↗
27. Sakai S, Morito S, Ohba T, Yoshida H, Takagi S. Connectivity of slip systems between different phases in ferrite–martensite dual-phase steels. J Alloys Compd. 2013;577(Supplement 1):S597–600. https://doi.org/10.1016/j.jallcom.2012.02.027.10.1016/j.jallcom.2012.02.027 ↗
28. Barnett MR, Ghaderi A, da Quinta Fonseca J, Robson JD. Influence of orientation on twin nucleation and growth at low strains in a magnesium alloy. Acta Mater. 2014;80:380–91. https://doi.org/10.1016/j.actamat.2014.07.013.10.1016/j.actamat.2014.07.013 ↗
29. Yan J, Ding H, Huang H, Fu C, Li F. In-situ investigation of tensile deformation and fracture mechanism of 12Cr1MoV steel after long-term service. Mater Sci Eng, A. 2017;700:33–41. https://doi.org/10.1016/j.msea.2017.05.096.10.1016/j.msea.2017.05.096 ↗
30. Wang C, Yin J, He J, Zhu X, Wu Z, Luo K, et al. Effect of grain boundary engineering on electrochemical and intergranular corrosion of 316L stainless steel. Corros Sci. 2025;254:113050. https://doi.org/10.1016/j.corsci.2025.113050.10.1016/j.corsci.2025.113050 ↗
31. Jin I, Tao Y, Wang X, Qian Z, Chen W, Wu C, et al. Concurrent improvements of corrosion resistance and coercivity in Nd-Ce-Fe-B sintered magnets through engineering the intergranular phase. J Mater Sci Technol. 2022;110:239–45. https://doi.org/10.1016/j.jmst.2021.09.008.10.1016/j.jmst.2021.09.008 ↗
32. Liu Bo, Zhang H, Xu J, Gao Y, Yang X, Zhen B, et al. Improving the hot corrosion resistance of additively manufactured Inconel 718 via recrystallization-based grain boundary engineering induced by its residual stress. Mater Today Commun. 2024;39:108792. https://doi.org/10.1016/j.mtcomm.2024.108792.10.1016/j.mtcomm.2024.108792 ↗
33. Zhou ZQ, Ye YJ, Zhang P, Yan JB, Liu P, Li LM, et al. Yield strength anomaly and microstructural evolution of solution-treated Ni-Fe-based superalloy deformed by high-temperature tension. Mater Sci Eng, A. 2025;935:148366. https://doi.org/10.1016/j.msea.2025.148366.10.1016/j.msea.2025.148366 ↗
34. Yutian WX, Yubi G, Bi Zhongnan Du, Jinhui and Gan Bin. Microstructure and Texture Evolution of Ni-based Superalloy During Deformation and Thermomechanical Treatments[J]. Rare Metal Mater Eng. 2023;52(5):1555–64. https://doi.org/10.12442/j.issn.1002-185X.20220716.10.12442/j.issn.1002-185X.20220716 ↗
35. Bajaj D, Feng AH, Qu SJ, Li DY, Chen DL. Orientation-dependent lattice rotation and phase transformation in an additively manufactured high-entropy alloy. J Mater Sci Technol. 2025;227:11–25. https://doi.org/10.1016/j.jmst.2024.10.054.10.1016/j.jmst.2024.10.054 ↗
36. Zhan L, Xue G, Yang J, Zhang W, Jiao X, Wang G, et al. Superplastic behavior and microstructure evolution of a fine-grained Mg-Nd-Zn-Zr alloy processed by hot extrusion. Mater Sci Eng, A. 2022;846:143314. https://doi.org/10.1016/j.msea.2022.143314.10.1016/j.msea.2022.143314 ↗