journal article·2025-11-20Open access

Microstructure and corrosion resistance of hafnium-doped aluminide layers deposited on IN 713C nickel alloy using CVD method: experimental and ab initio studies

R. Sitek, J. Kamiński, A. Wadowski, M. Kopec, B. Adamczyk-Cieślak, P. Bazarnik, M. Drajewicz, W. J. Nowak, J. S. Wróbel

Abstract

Abstract In this paper, the effect of hafnium, titanium, and molybdenum addition on the microstructure and properties of the aluminide layers deposited by using a chemical vapor deposition process on IN 713C nickel superalloy substrate was discussed. A multi-component aluminide diffusion layer containing Ni–Al, Al–Ti–Ni, and hafnium-rich phases was successfully formed by aluminizing IN 713C nickel superalloy. Subsequently performed corrosion resistance tests confirmed the beneficial effect of the aluminide layer deposited on IN 713C as compared to substrate material. Anticipating improved mechanical response of coated material, density functional theory calculations were performed. It was found that a single Hf/Ti/Mo atom prefers to be positioned within the Al sublattice in the NiAl, and Ni 3 Al phases. This justifies the presence of the experimentally observed Ni 3 Hf phase in the Hf-enriched IN 713C. The Hf modification effects on the NiAl, and Ni 3 Al were further discussed based on the changes of the elastic constants C ij , bulk modulus B , and shear modulus G . The presence of Hf in NiAl causes a decrease of phase’s C 12 and C 44 values, and increase in the C 11 value. It was found that Hf modification of the Ni 3 Al causes a decrease in the C ij values and a slight decrease of phase’s B / G ratio, indicating a less ductile character of modified phase decohesion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Coleman M, Alshehri H, Banik R, Harrison W, Birosca S. Deformation mechanisms of IN713C nickel based superalloy during small punch testing. Mater Sci Eng A. 2016;650:422–31. https://doi.org/10.1016/j.msea.2015.10.056.10.1016/j.msea.2015.10.056 ↗
2. Keshavarz MK, Turenne S, Bonakdar A. Solidification behavior of inconel 713LC gas turbine blades during electron beam welding. J Manuf Process. 2018;31:232–9. https://doi.org/10.1016/j.jmapro.2017.11.021.10.1016/j.jmapro.2017.11.021 ↗
3. Łyczkowska K, Adamiec J. Repair of precision castings made of the Inconel 713C alloy. Arch Foundry Eng. 2017;17(3):210–6. https://doi.org/10.1515/afe-2017-0117.10.1515/afe-2017-0117 ↗
4. Matysiak H, Zagorska M, Balkowiec A, Adamczyk-Cieslak B, Cygan R, Cwajna J, Nawrocki J, Kurzydłowski KJ. The microstructure degradation of the IN 713C nickel-based superalloy after the stress rupture tests. JMEPEG. 2014;23:3305–13. https://doi.org/10.1007/s11665-014-1123-4.10.1007/s11665-014-1123-4 ↗
5. Raj R, Moskowitz S. Transpiration air protected turbine blades—an effective concept to achieve high temperature and erosion resistance for gas turbines operating in an aggressive environment. 78-GT-100, Am Soc Mech Eng. 1978;(780):1–11.10.1115/78-GT-100 ↗
6. Sitek R, Kwaśniak P, Sopicka-Lizer M, Borysiuk J, Kamiński J, Mizera J, Kurzydłowski KJ. Experimental and ab-initio study of the Zr- and Cr-enriched aluminide layer produced on an IN 713C Inconel substrate by CVD; investigations of the layer morphology, structural stability, mechanical properties, and corrosion resistance. Intermetallics. 2016;74:15–24. https://doi.org/10.1016/j.intermet.2016.04.003.10.1016/j.intermet.2016.04.003 ↗
7. Thakare JG, Pandey C, Mahapatra MM, et al. Thermal barrier coatings—a state of the art review. Met Mater Int. 2021;27:1947–68. https://doi.org/10.1007/s12540-020-00705-w.10.1007/s12540-020-00705-w ↗
8. Thakare JG, Pandey C, Mulik RS, Mahapatra MM. Mechanical property evaluation of carbon nanotubes reinforced plasma sprayed YSZ-alumina composite coating. Ceram Int. 2018;44(6):6980–9. https://doi.org/10.1016/j.ceramint.2018.01.131.10.1016/j.ceramint.2018.01.131 ↗
9. Barwińska I, Kopeć M, Kukla D, Senderowski C, Kowalewski ZL. Thermal barrier coatings for high-temperature performance of nickel-based superalloys: a synthetic review. Coatings. 2023;13(4):1–21. https://doi.org/10.3390/coatings13040769.10.3390/coatings13040769 ↗
10. Kopec M. Recent advances in the deposition of aluminide coatings on nickel-based superalloys: a synthetic review (2019–2023). Coatings. 2024;14(630):1–15. https://doi.org/10.3390/coatings14050630.10.3390/coatings14050630 ↗
11. Szczepankowski A, Przysowa R. Thermal degradation of turbine components in a military turbofan. Eng Fail Anal. 2022;134:106088. https://doi.org/10.1016/j.engfailanal.2022.106088.10.1016/j.engfailanal.2022.106088 ↗
12. Łyczkowska K, Adamiec J. The phenomena and criteria determining the cracking susceptibility of repair padding welds of the Inconel 713C nickel alloy. Materials. 2022;15(634):1–20. https://doi.org/10.3390/ma15020634.10.3390/ma15020634 ↗
13. Pauzi AA, Berahim N, Husin S. Degradation of gas turbine blades for a thermal power plant. MATEC Web Conf. 2016;54(303002):1–4. doi: 10.1051/matecconf/20165403002
14. Mevissen F, Meo M. A review of NDT/structural health monitoring techniques for hot gas components in gas turbines. Sensors. 2019;19(711):1–37. https://doi.org/10.3390/s19030711.10.3390/s19030711 ↗
15. Park M, Hwang Y-h, Choi Y-s, Kim T-g. Analysis of a J69-T-25 engine turbine blade fracture. Eng Fail Anal. 2002;9:593–601. https://doi.org/10.1016/S1350-6307(02)00003-1.10.1016/S1350-6307(02)00003-1 ↗
16. Mevissen F, Meo M. Ultrasonically stimulated thermography for crack detection of turbine blades. Infrared Phys Technol. 2022;122:104061. https://doi.org/10.1016/j.infrared.2022.104061.10.1016/j.infrared.2022.104061 ↗
17. Kukla D, Kopec M, Sitek R, Olejnik A, Kachel S, Kiszkowiak Ł. A novel method for high temperature fatigue testing of nickel superalloy turbine blades with additional NDT diagnostics. Materials. 2021;14:1392. https://doi.org/10.3390/ma14061392.10.3390/ma14061392 ↗
18. Tamarin Y. Protective coatings for turbine blades. Materials Park: ASM International; 2002. Ohio, USA
19. Dutta RS, Arya A, Yusufali C, Vishwanadh B, Tewari R, Dey GK. Formation of aluminides on Ni-based superalloy 690 substrate, their characterization and first-principle Ni(111)/NiAl(110) interface simulations. Surf Coat Technol. 2013;235:741–7. https://doi.org/10.1016/j.surfcoat.2013.08.061.10.1016/j.surfcoat.2013.08.061 ↗
20. Zhang J, Liu W-d, Gong X-n, Yang Z-q, Zhou H-f, Xu Z-b, Zhang W-l. Probing the failure mechanisms and microstructure evolution of a high-pressure turbine blade coated with AlSiY. Eng Fail Anal. 2021;125:105436. https://doi.org/10.1016/j.engfailanal.2021.105436.10.1016/j.engfailanal.2021.105436 ↗
21. Dutta RS, Singh K, Vishwanadh B, Dey GK. Aluminide formation on Alloy 800 by plasma spraying and heat treatment. Mater Manuf Process. 2017;32(16):1845–50. https://doi.org/10.1080/10426914.2017.1317794.10.1080/10426914.2017.1317794 ↗
22. Naraparaju R, Schulz U, Mechnich P, Döbber P, Seidel F. Degradation study of 7 wt.% yttria stabilised zirconia (7YSZ) thermal barrier coatings on aero-engine combustion chamber parts due to infiltration by different CaO–MgO–Al2O3–SiO2 variants. Surf Coat Technol. 2013;235:741–7. https://doi.org/10.1016/j.surfcoat.2013.08.061.10.1016/j.surfcoat.2013.08.061 ↗
23. Tacikowski M, Sitek R, Sikorski K, Wierzchoń T. Structure of Al–Ni intermetallic composite layers produced on the Inconel 600 by the glow discharge enhanced-PACVD method. Intermetallics. 2009;17(12):1098–104. https://doi.org/10.1016/j.intermet.2009.06.010.10.1016/j.intermet.2009.06.010 ↗
24. Liu S-H, Trelles JP, Murphy AB, He W-T, Shi J, Li S, Li C-J, Li C-X, Guo H-B. Low-pressure plasma-induced physical vapor deposition of advanced thermal barrier coatings: microstructures, modelling and mechanisms. Mater Today Phys. 2021;21:100481. https://doi.org/10.1016/j.mtphys.2021.100481.10.1016/j.mtphys.2021.100481 ↗
25. Kampe SL, Koss DA. The effect of stress state on the hydrogen embrittlement of Nickel. Acta Metall. 1999;34:895–900. https://doi.org/10.1016/0001-6160(86)90231-2.10.1016/0001-6160(86)90231-2 ↗
26. Baskes MI, Vitek V. Trapping of hydrogen and helium at grain boundaries in nickel: an atomistic study. Metall Mater Trans A. 1985;16:1625–31. https://doi.org/10.1007/BF02663018.10.1007/BF02663018 ↗
27. Szczotok A, Kościelniak B. Characterization of IN 713C superalloy microstructure after high temperature creep test by LM, SEM and STEM. Mater Eng. 2016;2(210):50–58. https://doi.org/10.15199/28.2016.2.1.10.15199/28.2016.2.1 ↗
28. Pierson HO. Handbook of chemical vapor deposition (CVD) principles, technology, and applications. 1999, William Andrew Pub., LLC Norwich, New York, U.S.A.
29. Yavorska M, Sieniawski J, Zielińska M. Functional properties of aluminide layer deposited on Inconel 713 LC Ni-based superalloy in the CVD process. Arch Metall Mater. 2011;56(1):187–92. https://doi.org/10.2478/v10172-011-0022-z.10.2478/v10172-011-0022-z ↗
30. Zhang G, Wang X, Xiong Y, Shi Y, Song J, Luo D. Mechanism for adsorption, dissociation and diffusion of hydrogen in hydrogen permeation barrier of α-Al2O3: a density functional theory study. Int J Hydrog Energy. 2013;38(2):1157–65. https://doi.org/10.1016/j.ijhydene.2012.10.108.10.1016/j.ijhydene.2012.10.108 ↗
31. Yamabe J, Matsuoka S, Murakami Y. Surface coating with a high resistance to hydrogen entry under high-pressure hydrogen-gas environment. Int J Hydrog Energy. 2013;38(24):10141–54. https://doi.org/10.1016/j.ijhydene.2013.05.152.10.1016/j.ijhydene.2013.05.152 ↗
32. Lu X, Ma Y, Wang D. On the hydrogen embrittlement behaviour of nickel-based alloys: Alloys 718 and 725. Mater Sci Eng A. 2020;792:139785. https://doi.org/10.1016/j.msea.2020.139785.10.1016/j.msea.2020.139785 ↗
33. Kurniawan R, Park GC, Park KM, Zhen Yu, Kwak YI, Kim MC, Lee JM, Ko TJ, Park C-S. Machinability of modified Inconel 713C using a WC TiAlN-coated tool. J Manuf Process. 2020;57:409–30. https://doi.org/10.1016/j.jmapro.2020.06.032.10.1016/j.jmapro.2020.06.032 ↗
34. Orazem ME, Tribollet B. Electrochemical impedance spectroscopy. Hoboken: Wiley; 2008.10.1002/9780470381588 ↗
35. Kresse ZG, Furthmüller J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput Mater Sci. 1996;6:15–50.10.1016/0927-0256(96)00008-0 ↗
36. Kresse G, Furthmüller J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B. 1996;54:11169.10.1103/PhysRevB.54.11169 ↗
37. Monkhorst HJ, Pack JD. Special points for Brillouin-zone integrations. Phys Rev B. 1976;13:5188.10.1103/PhysRevB.13.5188 ↗
38. Tuli V, Claisse A, Messina L, Burr PA. Solubility and vacancy-mediated interdiffusion in the Zr–Nb–Cr system. J Nucl Mater. 2021;548:152867. https://doi.org/10.1016/J.JNUCMAT.2021.152867.10.1016/J.JNUCMAT.2021.152867 ↗
39. Wldom B. Some topics in the theory of fluids. J Chem Phys. 1963;39:2808–12. https://doi.org/10.1063/1.1734110.10.1063/1.1734110 ↗
40. Voigt WA. Critical study of the elastic properties and stability of Heusler compounds: phase change and tetragonal X2YZ compounds. Lehrbuch de Kristallphysik. Leipzig: Terubner; 1928.
41. Reuss A. Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. ZAMM J Appl Math Mech. 1929. https://doi.org/10.1002/zamm.19290090104.10.1002/zamm.19290090104 ↗
42. Hill R. The elastic behaviour of a crystalline aggregate. Proc Phys Soc A. 1952;65:349–54.10.1088/0370-1298/65/5/307 ↗
43. Pugh SF. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals. Philos Mag. 1954;7(45):823–43. https://doi.org/10.1080/14786440808520496.10.1080/14786440808520496 ↗
44. Góral M, Pytel M, Filip R, Nowotnik A. The microstructure of hafnium modified aluminide coatings deposited by CVD method. Mater Sci Forum. 2015;844:172–6. https://doi.org/10.4028/www.scientific.net/MSF.844.172.10.4028/www.scientific.net/MSF.844.172 ↗
45. Zagórska M, Sitek R, Kamiński J, Matysiak H, Kurzydłowski KJ. Microstructure and corrosion resistance of Hf-modified NiAl layer on nickel superalloy Ni–Cr–Co–Mo–2Ti–1.5Al. Mechanik. 2015;2:307–15.
46. Tian WH, Han CS, Nemoto M. Precipitation of α-Cr in B2-ordered NiAl. Intermetallics. 1999;7:59–67.10.1016/S0966-9795(98)00015-6 ↗
47. Hinnemann B, Carter EA. Adsorption of Al, O, Hf, Y, Pt, and S atoms on α-Al2O3(0001). J Phys Chem C. 2007;111(19):7105–26. https://doi.org/10.1021/jp068869c.10.1021/jp068869c ↗
48. Pan Z, Luo H, Zhao Q, Cheng H, Li X. Effect of Hf addition on microstructural evolution and corrosion behavior of nickel-based alloys in hydrochloric acid. Corros Sci. 2023;224:111507. https://doi.org/10.1016/j.corsci.2023.111507.10.1016/j.corsci.2023.111507 ↗
49. Maurya AK, Pandey SM, Chhibber R, et al. Structure–property relationships and corrosion behavior of laser-welded X-70/UNS S32750 dissimilar joint. Arch Civ Mech Eng. 2023;23:81. https://doi.org/10.1007/s43452-023-00627-5.10.1007/s43452-023-00627-5 ↗
50. Maurya AK, Bhattacharyya A, Chhibber R, Pandey C. Structural integrity and corrosion behavior assessment of the dissimilar gas tungsten arc welded joint of sDSS 2507/IN625 superalloy. Mater Chem Phys. 2024;318:129322. https://doi.org/10.1016/j.matchemphys.2024.129322.10.1016/j.matchemphys.2024.129322 ↗
51. Jiang C. Site preference of transition-metal elements in B2 NiAl: a comprehensive study. Acta Mater. 2007;55(2007):4799–806. https://doi.org/10.1016/J.ACTAMAT.2007.04.049.10.1016/J.ACTAMAT.2007.04.049 ↗
52. Eriş R, Akdeniz MV, Mekhrabov AO. The site preferences of transition elements and their synergistic effects on the bonding strengthening and structural stability of γ′-Ni3Al precipitates in Ni-based superalloys: a first-principles investigation. Metall Mater Trans A. 2021;52:2298–313. https://doi.org/10.1007/S11661-021-06222-8.10.1007/S11661-021-06222-8 ↗
53. Wang J, Shang S-L, Wang Y, Mei Z-G, Liang. Y-F, Du Y, Liu Z-K. First-principles calculations of binary Al compounds: enthalpies of formation and elastic properties. Calphad. 2011;35:562–73.10.1016/j.calphad.2011.09.009 ↗
54. Sot R, Kurzydłowski KJ. Ab initio calculations of elastic properties of Ni3Al and TiAl under pressure. Mater Sci-Pol. 2005;23(3):587–90.
55. Iotova D, Kioussis N, Lim SP. Electronic structure and elastic properties of the Ni3X (X = Mn, Al, Ga, Si, Ge) intermetallics. Phys Rev B Condens Matter. 1996;54:14413–22. https://doi.org/10.1103/PHYSREVB.54.14413.10.1103/PHYSREVB.54.14413 ↗
56. Boucetta S, Chihi T, Ghebouli B, Fatmi M. First-principles study of the elastic and mechanical properties of Ni3Al under high pressure. Mater Sci-Pol. 2010;28(28):347–55.
57. Kim DE, Shang SL, Liu ZK. Effects of alloying elements on elastic properties of Ni3Al by first-principles calculations. Intermetallics. 2010;18:1163–71. https://doi.org/10.1016/j.intermet.2010.02.024.10.1016/j.intermet.2010.02.024 ↗