journal article·2025-09-21

The impact of accelerated weathering exposure on the mechanical, thermal and chemical properties of natural insulators: natural cork, agglomerated cork and expanded cork

Guilherme J. A. Sousa, Fábio A. O. Fernandes, Sara Figueiredo, Ana P. F. Caetano, Rui M. Novais, Ricardo J. Alves de Sousa, António B. Pereira

Publisher page

Abstract

Cork materials, valued for their sustainability and thermal insulating properties, are gaining use as eco-friendly alternatives to synthetic insulation in building facades, among other architectural, construction, and building applications. However, the ageing effects caused by weathering exposure are yet to be investigated. Understanding how these materials respond to outdoor environmental stressors is essential to ensure their long-term performance in facade systems and other exposed building elements. Therefore, this study examines the effects of accelerated ultraviolet (UV) ageing and freeze–thaw (FT) cycles on natural, agglomerated, and expanded cork’s structure, mechanical, thermal, and chemical properties. Each cork type underwent UV and FT ageing, simulating seasonal environmental conditions, and was subsequently analysed through scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), compressive mechanical testing, and thermal analysis. UV exposure leads to the degradation of the cellular structure in all types of cork, with particularly significant in expanded cork. On the other hand, FT cycles primarily affect agglomerated cork. FTIR analysis corroborates these structural changes from SEM observations, showing spectral changes associated with suberin and lignin degradation in UV-exposed cork. However, only expanded cork exhibits changed or erased bands when exposed to FT cycles. Mechanical testing indicates that UV exposure reduces the compressive strength of natural cork, whereas FT cycles led to a slight increase in the agglomerated one and a significant decline for natural and expanded cork. Thermal tests reveal that UV exposure increases thermal conductivity and specific heat in natural cork but reduces diffusivity, while agglomerated cork experiences an increase in conductivity and diffusivity for the same conditions. FT cycles generally increase the conductivity of all cork types, while thermal diffusivity decreases for expanded cork and decreases for both natural and agglomerated cork.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plant Surface Properties and Treatments · Innovations in Concrete and Construction Materials · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Pereira H. Cork: biology, production and uses. Amsterdam: Elsevier; 2007.
2. Pereira H. The rationale behind Cork properties: a review of structure and chemistry. Bioresour. 2015;10:6207–29.10.15376/biores.10.3.Pereira ↗
3. Silva SSP, Sabino MA, Fernandes EM, Correlo VM, Boesel LF, Reis RL. Cork: properties, capabilities and applications. Int Mater Rev. 2005;50:345–65.10.1179/174328005X41168 ↗
4. Lequin S, Chassagne D, Karbowiak T, Simon J-M, Paulin C, Bellat J-P. Diffusion of oxygen in cork. J Agric Food Chem. 2012;60:3348–56.10.1021/jf204655c ↗
5. Gil L. New cork-based materials and applications. Materials. 2015;8:625–37.10.3390/ma8020625 ↗
6. Malhotra A, Abrol M, Shaji J. Adapting sustainable materials for interiors-pre & post Covid scenarios and applications. Int J Eng Res. 2022;12:1–14.
7. Fortes MA, Nogueira MT. The poison effect in cork. Mater Sci Eng A. 1989;122:227–32.10.1016/0921-5093(89)90634-5 ↗
8. Mateus MM, Bordado JM, dos Santos RG. Ultimate use of cork-unorthodox and innovative applications. Ciência & Tecnologia dos Materiais. 2017;29:65–72.10.1016/j.ctmat.2016.03.005 ↗
9. Serra GF, Fernandes FAO, Noronha E, Alves de Sousa RJ. Engineering and design of a last mile novel helmet concept. Arch Civil Mech Eng. 2024;25:11.10.1007/s43452-024-01061-x ↗
10. Antunes e Sousza GJ, Silva AJC, Serra GF, Fernandes FAO, Silva SP, Alves de Sousa RJ. Experimental and numerical insights into the multi-impact response of cork agglomerates. Materials. 2024;17(19):4772.10.3390/ma17194772 ↗
11. Tártaro AS, Mata TM, Martins AM, Esteves da Silva JCG. Carbon footprint of the insulation cork board. J Clean Prod. 2017;143:925–32.10.1016/j.jclepro.2016.12.028 ↗
12. Correia JMD, Serra GF, Alves de Sousa RJ, Pereira AB, Fernandes FAO. Expanded () cork for the development of an eco-friendly surfboard: environmental impact and mechanical properties. Sustainability. 2022;14(2):668.10.3390/su14020668 ↗
13. Yakimets I, Lai D, Guigon M. Effect of photo-oxidation cracks on behaviour of thick polypropylene samples. Polym Degrad Stab. 2004;86:59–67.10.1016/j.polymdegradstab.2004.01.013 ↗
14. Davis P, Tiganis BE, Burn LS. The effect of photo-oxidative degradation on frature in ABS pipe resins. Polym Degrad Stabil. 2004;84:233–42.10.1016/j.polymdegradstab.2003.10.017 ↗
15. Silva P, Fernandes P, Sena-Cruz J, Xavier J, Castro F, Soares D, et al. Effects of different environmental conditions on the mechanical characterization of a structural epoxy. Compos Part B Eng. 2016;88:55–63.10.1016/j.compositesb.2015.10.036 ↗
16. Redjala S, Hocite NA, Ferhoum R, Gratton M, Poirot N, Azem S. UV aging effects on polycarbonate properties. J Fail Anal Prev. 2020;20:1907–16.10.1007/s11668-020-01002-9 ↗
17. Koller R, Chang S, Xi Y. Fiber-reinforced polymer bars under freeze–thaw cycles and different loading rates. J Compos Mater. 2007;41:5–25.10.1177/0021998306063154 ↗
18. Gomes J, Casto B. Freeze–thaw durability of composite materials. Virginia transportation research council, Final Report (VTRC 96-R25). 1996
19. Adhikary K, Pang S, Staiger MP. Effects of the accelerated freeze-thae cycling on physical and mechanical properties of wood flour-recycled thermoplastic composites. Polym Compos. 2010;31:185–94.10.1002/pc.20782 ↗
20. Mak K, Fam A. Freeze–thaw cycling effect on tensile properties of unidirectional flax fiber reinforced polymers. Compos Part B Eng. 2019;174:1060–9.10.1016/j.compositesb.2019.106960 ↗
21. Sergi C, Sarasini F, Felici AC, Bracciale MP, Tirillò J. Effects of accelerated aging on compressive response of natural and synthetic core materials: freeze–thaw cycles and UV radiation. Wood Mater Sci Eng. 2024;19:253–63.10.1080/17480272.2023.2236988 ↗
22. Tiss B, Martínez BM, Mansilla C, Borges J, Andritschky M, Cunha L. Safeguarding cork’s beauty and longevity: innovations in deposition of protective thin films. Sustainability. 2023;15:16701.10.3390/su152416701 ↗
23. Miranda I, Lourenço A, Simões R, Athayde J, Pereira H. Insights into cork weathering regarding colour, chemical and celular changes in view of outdoor applications. PLoS ONE. 2024;19(4):e0301384.10.1371/journal.pone.0301384 ↗
24. Rocha B, Tenório M, Branco J, Silva S. A comprehensive comparison of insulation materials for timber building systems. Energies. 2025;18(10):2420.10.3390/en18102420 ↗
25. Kumar D, Alam M, Zou P, Sanjayan J, Memon R. Comparative analysis of building insulation material properties and performance. Renew Sustain Energy Rev. 2020;131:110038.10.1016/j.rser.2020.110038 ↗
26. Wang Z, Wang C, Gao Y, Li Z, Shang Y, Li H. Porous thermal insulation polyurethane foam materials. Polymers (Basel). 2023;15(18):3818.10.3390/polym15183818 ↗
27. Al-Azzawi W, Epaarachci JA, Leng J. Investigation of ultraviolet radiation effects on thermomechanical properties and shape memory behaviour of styrene-based shape memory polymers and its composite. Compos Sci Technol. 2018;165:266–73.10.1016/j.compscitech.2018.07.001 ↗
28. Redjala S, Ait-Hocine N, Ferhoum R, Gratton M, Poirot N, Azem S. UV aging effects on polycarbonate properties. J Fail Anal Prev. 2020;20:1907–16.10.1007/s11668-020-01002-9 ↗
29. Li H, Lei X, Wu Y, Honhchang L, Guo X. Study of discoloration behaviour of teak wood (Tectona grandis Linn. Fil.) caused by simulated sunlight. Wood Res. 2019;64:625–36.
30. Passaeur L, Prieto J, Muller M, Rossler M, Schubert J, Beyer M. Novel color stabilization concepts for decorative surfaces of native dark wood and thermally modified timber. Prog Org Coat. 2015;89:314–22.10.1016/j.porgcoat.2015.06.017 ↗
31. Adão MH, Cabrita GM, Gomes CM, Almeida BS, Fernandez AC, Bordado JC. Wetting of cork by polymeric adhesives. J Adhes Sci Technol. 1993;7:375–84.10.1163/156856193X00763 ↗
32. Silva SP, Sabino MA, Fernandas EM, Correlo VM, Boesel LF, Reis RL. Cork: properties, capabilities and applications. Int Mater Rev. 2005;50(6):345–65.10.1179/174328005X41168 ↗
33. Pintor AMA, Ferreira CIA, Pereira JC, Correia P, Silva SP, Vilar VJP, et al. Use of cork powder and granules for the adsorption of pollutants: a review. Water Res. 2012;46:3152–66.10.1016/j.watres.2012.03.048 ↗
34. Fernandes EM, Correlo VM, Mano JF, Reis RL. Cork-polymer biocomposites: mechanical, structural and thermal properties. Mater Des. 2015;82:282–9.10.1016/j.matdes.2015.05.040 ↗
35. Martins CI, Gil V. Processing–structure–properties of cork polymer composites. Front Mater. 2020. https://doi.org/10.3389/fmats.2020.00297.10.3389/fmats.2020.00297 ↗
36. Şen A, Marques AV, Gominho J, Pereira H. Study of thermochemical treatments of cork in the 150–400°C range using colour analysis and FTIR spectroscopy. Ind Crops Prod. 2012;38:132–8.10.1016/j.indcrop.2012.01.018 ↗
37. Şen A, Miranda I, Pereira H. Temperature-induced structural and chemical changes in cork from Quercus cerris. Ind Crop Prod. 2012;37:508–13.10.1016/j.indcrop.2011.07.028 ↗
38. Lopes MH, Barros AS, Pascoal Neto C, Rutledge D, Delgadillo I, Gil AM. Variability of cork from Portuguese Quercus suber studied by solid-state 13C-NMR and FTIR spectroscopies. Biopolymers. 2001;62:268–77.10.1002/bip.1022 ↗