Effect of micro removal amounts in laser shock peening with post-low stress milling on surface integrity and fatigue life of GH4169 superalloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Maleki E, Bagherifard S, Bandini M, Guagliano M. Surface post-treatments for metal additive manufacturing: progress, challenges, and opportunities. Addit Manuf. 2021;37:101619. https://doi.org/10.1016/j.addma.2020.101619.10.1016/j.addma.2020.101619 ↗
2. Maleki E, Unal O. Fatigue limit prediction and analysis of nano-structured AISI 304 steel by severe shot peening via ANN. Eng Comput. 2021;37(4):2663–78. https://doi.org/10.1007/s00366-020-00964-6.10.1007/s00366-020-00964-6 ↗
3. Haeri H, Talehjerdi AG, Sarfarazi V, Moayer A, Marji MF. A finite element analysis of the effects of TADAS dampers on the frame members’ performances in concrete structures under cyclic and monotonic loadings. Iran J Sci Technol-Trans Civ Eng. 2025;49(2):1133–56. https://doi.org/10.1007/s40996-024-01540-4.10.1007/s40996-024-01540-4 ↗
4. Alizadeh R, Fatehi Marji M, Abdollahipour A, Sagand MP. Numerical simulation of fatigue crack propagation in heterogeneous geomaterials under varied loads using displacement discontinuity method. J Rock Mech Geotech Eng. 2023;15(3):702–16. https://doi.org/10.1016/j.jrmge.2022.12.001.10.1016/j.jrmge.2022.12.001 ↗
5. Fatehi Marji M, Yousofian H, Soltanian H, Pourmazaheri Y, Abdollahipour A. Superior crack propagation inhibitory effectiveness of MWCNT reinforced SBS toward improving oil/gas well cement integrity. Constr Build Mater. 2023;403:133171. https://doi.org/10.1016/j.conbuildmat.2023.133171.10.1016/j.conbuildmat.2023.133171 ↗
6. Fu J, Haeri H, Sarfarazi V, Asgari K, Marji MF. The shear behaviors of concrete-gypsum specimens containing double edge cracks under four-point loading conditions. Theor Appl Fract Mech. 2022;119:103361. https://doi.org/10.1016/j.tafmec.2022.103361.10.1016/j.tafmec.2022.103361 ↗
7. Lei X, Zhang Z, Zhou H, Yang X, Hu P, He L, et al. Novel eco-friendly chemical mechanical polishing of aluminum alloy for achieving close atomic surface. Wear. 2025;578:206174. https://doi.org/10.1016/j.wear.2025.206174.10.1016/j.wear.2025.206174 ↗
8. Chen H, Hong B, Wu M, Wang L, Lyu B, Yang Y, et al. A novel method of liquid film shearing polishing for achieving high-quality and low-damage polycrystalline tungsten. J Manuf Process. 2025;149:165–78. https://doi.org/10.1016/j.jmapro.2025.05.076.10.1016/j.jmapro.2025.05.076 ↗
9. Zhang X, Huang Z, Zammit A, Buhagiar J, Cassar G, Li Z, et al. Selective laser melted 316L stainless steels duplex-treated by shot peening and TiAlCuN coating: elucidating the enhanced cavitation erosion resistance. Surf Coat Technol. 2025;511:132253. https://doi.org/10.1016/j.surfcoat.2025.132253.10.1016/j.surfcoat.2025.132253 ↗
10. Fang X, Wang Z, Wang W, Cao X, Li D, Wang Z, et al. Improvement mechanism of fretting fatigue lifetime of turbine dovetail tenon by shot peening combined with CuNiIn coating at 500 °C. Surf Coat Technol. 2024;494:131538. https://doi.org/10.1016/j.surfcoat.2024.131538.10.1016/j.surfcoat.2024.131538 ↗
11. Sun N, Lu S, Sun J, Hu D, Guo L, Zhang P, et al. Effects of fine particle peening treatment applied with different shot types and coverages on the surface integrity of TC11/Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy. Surf Coat Technol. 2025;499:131853. https://doi.org/10.1016/j.surfcoat.2025.131853.10.1016/j.surfcoat.2025.131853 ↗
12. Noguchi S, Mitake K, Kurosaka S, Doi K, Harada H, Kikuchi S. Improvement of fatigue performance of low-alloy steels with a sulfurized layer using fine particle peening as pre-treatment under rotating bending. Int J Fatigue. 2025;199:109043. https://doi.org/10.1016/j.ijfatigue.2025.109043.10.1016/j.ijfatigue.2025.109043 ↗
13. Wang Z, Ma Z, Chen T, Fan C, Yu T, Zhao J. Experimental investigation into the effect of process parameters on the Inconel 718 surface integrity for abrasive waterjet peening. Surf Coat Technol. 2023;454:129186. https://doi.org/10.1016/j.surfcoat.2022.129186.10.1016/j.surfcoat.2022.129186 ↗
14. Chakkravarthy V, Manojkumar P, Jerome S, Evlashin SA, Arackal Narayanan J, Mendagaliev RV, et al. Effect of impact angle on hot corrosion resistance of abrasive water jet peened Ti-6Al-4V alloy. Surf Coat Technol. 2024;494:131523. https://doi.org/10.1016/j.surfcoat.2024.131523.10.1016/j.surfcoat.2024.131523 ↗
15. Li C, Luo J, Zhao Z, Xu J. Effect of laser shock peening pretreatment on the microstructure and wear resistance of plasma nitrided TC4 titanium alloy. Surf Coat Technol. 2025;512:132337. https://doi.org/10.1016/j.surfcoat.2025.132337.10.1016/j.surfcoat.2025.132337 ↗
16. Ouyang W, Zhang L, Wu H, Wu D, Zhang S, Qin X, et al. Optimized mechanical properties of the hot forged Ti–6Al–4V alloy by regulating multiscale microstructure via laser shock peening. Int J Mach Tools Manuf. 2024;201:104192. https://doi.org/10.1016/j.ijmachtools.2024.104192.10.1016/j.ijmachtools.2024.104192 ↗
17. Efe Y, Karademir I, Husem F, Maleki E, Karimbaev R, Amanov A, et al. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification. Appl Surf Sci. 2020;528:146922. https://doi.org/10.1016/j.apsusc.2020.146922.10.1016/j.apsusc.2020.146922 ↗
18. Li J, Chen J, Chen Y, Ren J, Li J, Wu L, et al. Copper powder ultrasonic shot peening and its application in antifouling of Ti alloy. Surf Coat Technol. 2025;505:132089. https://doi.org/10.1016/j.surfcoat.2025.132089.10.1016/j.surfcoat.2025.132089 ↗
19. Meng X-k, Wang H, Tan W-s, Cai J, Zhou J-z, Liu L. Gradient microstructure and vibration fatigue properties of 2024–T351 aluminium alloy treated by laser shock peening. Surf Coat Technol. 2020;391:125698. https://doi.org/10.1016/j.surfcoat.2020.125698.10.1016/j.surfcoat.2020.125698 ↗
20. Lainé SJ, Knowles KM, Doorbar PJ, Cutts RD, Rugg D. Microstructural characterisation of metallic shot peened and laser shock peened Ti–6Al–4V. Acta Mater. 2017;123:350–61. https://doi.org/10.1016/j.actamat.2016.10.044.10.1016/j.actamat.2016.10.044 ↗
21. Bricín D, Jansa Z, Kaufman J, Špirit Z, Fulín Z, Strejcius J. Effect of laser shock peening on the microstructure of GX4CrNi13–4 martensitic stainless steel. J Manuf Process. 2025;149:818–27. https://doi.org/10.1016/j.jmapro.2025.06.002.10.1016/j.jmapro.2025.06.002 ↗
22. Wang F, Liu B, Sun Y, Shen Z. Reducing the rebound effect in microscale laser dynamic forming through multi-pulse laser shock loading. Metals. 2024. https://doi.org/10.3390/met14080945.10.3390/met14080945 ↗
23. Shen Z, Yu Y, Liu D, Liu B. Suppressing fracture defects and rebound effects in laser dynamic micro-forming using plasticine medium. Lasers Manuf Mater Process. 2025. https://doi.org/10.1007/s40516-025-00306-8.10.1007/s40516-025-00306-8 ↗
24. Ji J, Meng K, Li P, Shen Z. Fabrication of biomimetic anisotropic crescent-shaped microstructured surfaces by laser shock imprinting. Mater Sci. 2024;41(3):140–58. https://doi.org/10.2478/msp-2023-0039.10.2478/msp-2023-0039 ↗
25. Shen Z, Zhang L, Li P, Liu K, Lin Y, Zhou G, et al. Dynamic failure mechanism of copper foil in laser dynamic flexible forming. Mater Sci. 2020;38(4):684–92. https://doi.org/10.2478/msp-2020-0083.10.2478/msp-2020-0083 ↗
26. Bikdeloo R, Farrahi GH, Mehmanparast A, Mahdavi SM. Multiple laser shock peening effects on residual stress distribution and fatigue crack growth behaviour of 316L stainless steel. Theor Appl Fract Mech. 2020;105:102429. https://doi.org/10.1016/j.tafmec.2019.102429.10.1016/j.tafmec.2019.102429 ↗
27. Ghorbanpour S, Zecevic M, Kumar A, Jahedi M, Bicknell J, Jorgensen L, et al. A crystal plasticity model incorporating the effects of precipitates in superalloys: application to tensile, compressive, and cyclic deformation of Inconel 718. Int J Plast. 2017;99:162–85. https://doi.org/10.1016/j.ijplas.2017.09.006.10.1016/j.ijplas.2017.09.006 ↗
28. Maleki E, Unal O, Guagliano M, Bagherifard S. The effects of shot peening, laser shock peening and ultrasonic nanocrystal surface modification on the fatigue strength of Inconel 718. Mater Sci Eng A. 2021;810:141029. https://doi.org/10.1016/j.msea.2021.141029.10.1016/j.msea.2021.141029 ↗
29. Ren XD, Zhan QB, Yuan SQ, Zhou JZ, Wang Y, Ren NF, et al. A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169. Mater Des. 2014;54:708–11. https://doi.org/10.1016/j.matdes.2013.08.054.10.1016/j.matdes.2013.08.054 ↗
30. Jinoop AN, Subbu SK, Paul CP, Palani IA. Post-processing of laser additive manufactured Inconel 718 using laser shock peening. Int J Precis Eng Manuf. 2019;20(9):1621–8. https://doi.org/10.1007/s12541-019-00147-4.10.1007/s12541-019-00147-4 ↗
31. Lu Y, Yang Y, Zhao J, Yang Y, Qiao H, Hu X, et al. Impact on mechanical properties and microstructural response of nickel-based superalloy GH4169 subjected to warm laser shock peening. Materials. 2020. https://doi.org/10.3390/ma13225172.10.3390/ma13225172 ↗
32. Hu T, Li S, Qiao H, Lu Y, Sun B, Wu J. Effect of warm laser shock peening on microstructure and properties of GH4169 superalloy. Mater Sci Eng. 2018;423(1):012054. https://doi.org/10.1088/1757-899X/423/1/012054.10.1088/1757-899X/423/1/012054 ↗
33. Sheng J, Zhang H, Hu X, Huang S. Influence of laser peening on the high-temperature fatigue life and fracture of Inconel 718 nickel-based alloy. Theor Appl Fract Mech. 2020;109:102757. https://doi.org/10.1016/j.tafmec.2020.102757.10.1016/j.tafmec.2020.102757 ↗
34. Guo Y, Wang S, Liu W, Sun Z, Zhu G, Xiao T. Effect of laser shock peening on tribological properties of magnesium alloy ZK60. Tribol Int. 2020;144:106138. https://doi.org/10.1016/j.triboint.2019.106138.10.1016/j.triboint.2019.106138 ↗
35. Dou S, Ji P, Zhang J, Zheng L, Zhao F, Lian Y, et al. Effect of laser shock peening on near-surface residual stress and microstructure of laser additive manufacturing AlSi10Mg alloy. Opt Laser Technol. 2025;189:113114. https://doi.org/10.1016/j.optlastec.2025.113114.10.1016/j.optlastec.2025.113114 ↗
36. Gill AS, Telang A, Vasudevan VK. Characteristics of surface layers formed on Inconel 718 by laser shock peening with and without a protective coating. J Mater Process Technol. 2015;225:463–72. https://doi.org/10.1016/j.jmatprotec.2015.06.026.10.1016/j.jmatprotec.2015.06.026 ↗
37. Gill A, Telang A, Mannava SR, Qian D, Pyoun Y-S, Soyama H, et al. Comparison of mechanisms of advanced mechanical surface treatments in nickel-based superalloy. Mater Sci Eng A. 2013;576:346–55. https://doi.org/10.1016/j.msea.2013.04.021.10.1016/j.msea.2013.04.021 ↗
38. Sun J, Su A, Wang T, Chen W, Guo W. Effect of laser shock processing with post-machining and deep cryogenic treatment on fatigue life of GH4169 super alloy. Int J Fatigue. 2019;119:261–7. https://doi.org/10.1016/j.ijfatigue.2018.10.012.10.1016/j.ijfatigue.2018.10.012 ↗
39. Lu S, Sun J, Ma Y, Sun N. Pre-mixed abrasive waterjet peening with post-low stress milling process and the effect of process parameters on the surface integrity of TC11 titanium alloy. Surf Coat Technol. 2024;478:130409. https://doi.org/10.1016/j.surfcoat.2024.130409.10.1016/j.surfcoat.2024.130409 ↗
40. Su B, Zhang Y, Sun G, Ni Z. Prediction of micro indention depth of TC4 titanium alloy during laser shock processing. Jpn J Appl Phys. 2018;57(12):122703. https://doi.org/10.7567/JJAP.57.122703.10.7567/JJAP.57.122703 ↗
41. Wang Z, Liao Z, Yang Y, Dong X, Augustinavicius G, Yu T, et al. Modelling and experimental study of surface treatment in abrasive waterjet peening of Nickel-based superalloy: inverse problem. Mater Des. 2022;215:110471. https://doi.org/10.1016/j.matdes.2022.110471.10.1016/j.matdes.2022.110471 ↗
42. Yuri T, Ono Y, Ogata T. Effects of surface roughness and notch on fatigue properties for Ti–5Al–2.5Sn ELI alloy at cryogenic temperatures. Sci Technol Adv Mater. 2003;4(4):291–9. https://doi.org/10.1016/S1468-6996(03)00058-5.10.1016/S1468-6996(03)00058-5 ↗
43. Luo X, Dang N, Wang X. The effect of laser shock peening, shot peening and their combination on the microstructure and fatigue properties of Ti-6Al-4V titanium alloy. Int J Fatigue. 2021;153:106465. https://doi.org/10.1016/j.ijfatigue.2021.106465.10.1016/j.ijfatigue.2021.106465 ↗
44. Li Y, Gan W, Zhou W, Li D. Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes. Chin J Aeronaut. 2023;36(5):96–124. https://doi.org/10.1016/j.cja.2022.07.020.10.1016/j.cja.2022.07.020 ↗
45. Arunachalam RM, Mannan MA, Spowage AC. Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools. Int J Mach Tools Manuf. 2004;44(9):879–87. https://doi.org/10.1016/j.ijmachtools.2004.02.016.10.1016/j.ijmachtools.2004.02.016 ↗
46. Liu D, Ni C, Wang Y, Zhu L. Review of serrated chip characteristics and formation mechanism from conventional to additively manufactured titanium alloys. J Alloy Compd. 2024;970:172573. https://doi.org/10.1016/j.jallcom.2023.172573.10.1016/j.jallcom.2023.172573 ↗
47. Ren XD, Zhang YK, Yongzhuo HF, Ruan L, Jiang DW, Zhang T, et al. Effect of laser shock processing on the fatigue crack initiation and propagation of 7050–T7451 aluminum alloy. Mater Sci Eng A. 2011;528(6):2899–903. https://doi.org/10.1016/j.msea.2010.12.058.10.1016/j.msea.2010.12.058 ↗
48. Schwach DW, Guo YB. A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue. Int J Fatigue. 2006;28(12):1838–44. https://doi.org/10.1016/j.ijfatigue.2005.12.002.10.1016/j.ijfatigue.2005.12.002 ↗
49. Chen W, He P, Pan X, Yang H, Dang X, Yu Z, et al. Enhanced surface integrity and fatigue properties of laser powder bed fused GH4169 superalloy processed by femtosecond laser shock peening. Surf Coat Technol. 2025;513:132499. https://doi.org/10.1016/j.surfcoat.2025.132499.10.1016/j.surfcoat.2025.132499 ↗
50. Song S, Wu Z, Zhao J, Zhou L, Guo S, Kan Q, et al. Crystal plasticity modeling of uniaxial tensile and fatigue failure behaviors of laser shock peened aluminum alloy. Int J Fatigue. 2025;201:109145. https://doi.org/10.1016/j.ijfatigue.2025.109145.10.1016/j.ijfatigue.2025.109145 ↗
51. Matušů M, Stránský O, Slaný M, Šimota J, Džuberová L, Rosenthal J, et al. Effect of laser shock peening on fatigue properties of additively manufactured AlSi10Mg. Int J Fatigue. 2025;201:109149. https://doi.org/10.1016/j.ijfatigue.2025.109149.10.1016/j.ijfatigue.2025.109149 ↗
52. Jiang Y, Zou T, Ni S, ZhangYu T, Pei Y, Zhang H, et al. Mechanistic investigation of laser shock peening on high cycle fatigue behavior and microstructural evolution in MAR-M247 nickel based superalloy. J Mater Sci. 2025;60(29):12554–73. https://doi.org/10.1007/s10853-025-11146-4.10.1007/s10853-025-11146-4 ↗
53. Angulo I, Cordovilla F, García-Beltrán A, Smyth NS, Langer K, Fitzpatrick ME, et al. The effect of material cyclic deformation properties on residual stress generation by laser shock processing. Int J Mech Sci. 2019;156:370–81. https://doi.org/10.1016/j.ijmecsci.2019.03.029.10.1016/j.ijmecsci.2019.03.029 ↗
54. Chen H, Liu Z, Wang X, Wang Y, Liu S. Effect of surface integrity on fatigue life of 2024 aluminum alloy subjected to turning. J Manuf Process. 2022;83:650–66. https://doi.org/10.1016/j.jmapro.2022.07.070.10.1016/j.jmapro.2022.07.070 ↗
55. Suraratchai M, Limido J, Mabru C, Chieragatti R. Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy. Int J Fatigue. 2008;30(12):2119–26. https://doi.org/10.1016/j.ijfatigue.2008.06.003.10.1016/j.ijfatigue.2008.06.003 ↗
56. Chan KS. Roles of microstructure in fatigue crack initiation. Int J Fatigue. 2010;32(9):1428–47. https://doi.org/10.1016/j.ijfatigue.2009.10.005.10.1016/j.ijfatigue.2009.10.005 ↗
57. Neuber H, Kerbspannungslehre, three ed., Berlin: De Gruyter; 198510.1007/978-3-662-08059-7 ↗
58. Arola D, Williams CL. Estimating the fatigue stress concentration factor of machined surfaces. Int J Fatigue. 2002;24(9):923–30. https://doi.org/10.1016/S0142-1123(02)00012-9.10.1016/S0142-1123(02)00012-9 ↗
59. Hansen N. Hall-petch relation and boundary strengthening. Scr Mater. 2004;51(8):801–6. https://doi.org/10.1016/j.scriptamat.2004.06.002.10.1016/j.scriptamat.2004.06.002 ↗
60. Ralph I, Stephens A, Robert F, Stephens R, Henry Fuchs O. Metal fatigue in engineering. 2nd ed. New York: Wiley; 2000.
61. Peyre P, Fabbro R, Berthe L, Dubouchet C. Laser shock processing of materials, physical processes involved and examples of applications. J Laser Appl. 2012;8(3):135–41. https://doi.org/10.2351/1.4745414.10.2351/1.4745414 ↗
62. Cottet F, Romain JP. Formation and decay of laser-generated shock waves. Phys Rev A. 1982;25(1):576–9. https://doi.org/10.1103/PhysRevA.25.576.10.1103/PhysRevA.25.576 ↗
63. Gerland M, Hallouin M, Presles HN. Comparison of two new surface treatment processes, laser-induced shock waves and primary explosive: application to fatigue behaviour. Mater Sci Eng A. 1992;156(2):175–82. https://doi.org/10.1016/0921-5093(92)90149-U.10.1016/0921-5093(92)90149-U ↗
64. Phipps CR Jr., Turner TP, Harrison RF, York GW, Osborne WZ, Anderson GK, et al. Impulse coupling to targets in vacuum by KrF, HF, and CO2 single-pulse lasers. J Appl Phys. 1988;64(3):1083–96. https://doi.org/10.1063/1.341867.10.1063/1.341867 ↗
65. Fabbro R, Fournier J, Ballard P, Devaux D, Virmont J. Physical study of laser-produced plasma in confined geometry. J Appl Phys. 1990;68(2):775–84. https://doi.org/10.1063/1.346783.10.1063/1.346783 ↗