Effect of mixing water on early-stage properties and hydration mechanisms of alkali-activated materials containing slag and desulfurization gypsum
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Li Y, Liu X, Li Z, Ren Y, Wang Y, Zhang W. Preparation, characterization and application of red mud, fly ash and desulfurized gypsum based eco-friendly road base materials. J Clean Prod. 2021;284:124777.
2. Gijbels K, Landsberger S, Samyn P, Iacobescu RI, Pontikes Y, Schreurs S, et al. Radiological and non-radiological leaching assessment of alkali-activated materials containing ground granulated blast furnace slag and phosphogypsum. Sci Total Environ. 2019;660:1098–107.
3. Li J, Chen D, Yu K, Zhang S, Cao W, Yi C, et al. Mix design and performance of low-carbon alkali-activated slag/bagasse ash cementitious materials. J Build Eng. 2024;90:109468.
4. Liu S, Liu W, Jiao F, Qin W, Yang C. Production and resource utilization of flue gas desulfurized gypsum in China-a review. Environ Pollut. 2021;288:117799.
5. Liang G, Yao W, Wei Y. A green ultra-high performance geopolymer concrete containing recycled fine aggregate: mechanical properties, freeze-thaw resistance and microstructure. Sci Total Environ. 2023;895:165090.
6. Mohapatra A, Pradhan B. Hybrid alkali activated cements (HAACs) system: a state-of-the-art review on fresh, mechanical, and durability behaviour. Constr Build Mater. 2022;361:129636.
7. Yang F, Liu J, Jia H, Chen Z, Liu L, Zhu J, et al. Corrosion mechanism of alkali-activated slag/metakaolin materials under carbonic acid solution. Cem Concr Compos. 2024;154:105779.
8. Zhang P, Wang K, Li Q, Wang J, Ling Y. Fabrication and engineering properties of concretes based on geopolymers/alkali-activated binders-a review. J Clean Prod. 2020;258:120896.
9. Hassan H, El-Gamal SMA, Shehab MSH, Mohsen A. Development of green ternary-blended-geopolymers for multifunctional engineering applications. Constr Build Mater. 2023;409:133869.
10. Tahwia AM, Aldulaimi DS, Abdellatief M, Youssf O. Physical, mechanical and durability properties of eco-friendly engineered geopolymer composites. Infrastructures. 2024;9(11):191.
11. Tahwia AM, Abdellatief M, Salah A, Youssf O. Valorization of recycled concrete powder, clay brick powder, and volcanic pumice powder in sustainable geopolymer concrete. Sci Rep. 2025;15(1):11049.
12. Zhou A, Li K, Liu T, Zou D, Peng X, Lyx H, et al. Recycling and optimum utilization of engineering sediment waste into low-carbon geopolymer paste for sustainable infrastructure. J Clean Prod. 2022;383:135549.
13. Marvila MT, de Azevedo ARG, de Oliveira LB, Xavier GD, Vieira CMF. Mechanical, physical and durability properties of activated alkali cement based on blast furnace slag as a function of %Na2O. Case Studies in Construction Materials. 2021;15:e00723.
14. Dener M, Altunhan U, Benli A. A green binder for cold weather applications: enhancing mechanical performance of alkali-activated slag through modulus, alkali dosage, and Portland cement substitution. Archives of Civil and Mechanical Engineering. 2024;24(3):176.
15. Qu F, Li W, Wang K, Tam VW, Zhang S. Effects of seawater and undesalted sea sand on the hydration products, mechanical properties and microstructures of cement mortar. Constr Build Mater. 2021;310:125229.
16. Li W, Jiang Z, Lu M, Long W, Xing F, Liu J. Effects of seawater, NaCl, and Na2SO4 solution mixing on hydration process of cement paste. J Mater Civ Eng. 2021;33(5):04021057.
17. Wang J, Xie J, Wang Y, Liu Y, Ding Y. Rheological properties, compressive strength, hydration products and microstructure of seawater-mixed cement pastes. Cem Concr Compos. 2020;114:103770.
18. Cai Y, Xuan D, Hou P, Shi J, Poon CS. Effect of seawater as mixing water on the hydration behaviour of tricalcium aluminate. Cem Concr Res. 2021;149:106565.
19. Sun Y, Lu JX, Poon CS. Strength degradation of seawater-mixed alite pastes: an explanation from statistical nanoindentation perspective. Cem Concr Res. 2022;152:106669.
20. Assi LN, Al-Hamadani YA, Deaver EE, Soltangharaei V, Ziehl P, Yoon Y. Effect of sonicated deionized water on the early age behavior of Portland cement-based concrete and paste. Constr Build Mater. 2020;247:118571.
21. Pang X, Kong X, Liu X, Hao T. The dispersing performances of polycarboxylate superplasticizer in cement pastes prepared with deionized water and seawater. Mater Struct. 2021;54(2):85.
22. Jun Y, Kim T, Kim JH. Chloride-bearing characteristics of alkali-activated slag mixed with seawater: effect of different salinity levels. Cem Concr Compos. 2020;112:103680.
23. Zhao J, Long B, Yang G, Cheng Z, Liu Q. Characteristics of alkali-activated slag powder mixing with seawater: workability, hydration reaction kinetics and mechanism. Case Stud Constr Mater. 2022;17:e01381.
24. Lu JX, Shen P, Zhang Y, Zheng H, Sun Y, Poon CS. Early-age and microstructural properties of glass powder blended cement paste: improvement by seawater. Cem Concr Compos. 2021;122:104165.
25. Yang Z, Zhan X, Zhu H, Zhang B, Feng P, Li H, et al. Performance-based alkali-activated seawater sea-sand concrete: mixture optimization for mechanical, environmental, and economical objectives. Constr Build Mater. 2023;409:134156.
26. Hou W, Ye F, Yu Y, Chen D, Wang J, Liu F, et al. Experimental study on the strength characteristics and seawater degradation resistance of sandy silt solidified with alkali-activated slag. Constr Build Mater. 2025;458:139610.
27. Huang Z, Zhou Y, Xiang S, Sui L, Guo M. In-depth investigation on macro-properties and micro-mechanism of sustainable alkali-activated slag/fly ash paste incorporating seawater. J Build Eng. 2024;98:111462.
28. Kuang L, Li G, Xiang J, Ma W, Cui X. Effect of seawater on the properties and microstructure of metakaolin/slag-based geopolymers. Constr Build Mater. 2023;397:132418.
29. Ting MZY, Yi Y. Durability of cementitious materials in seawater environment: A review on chemical interactions, hardened-state properties and environmental factors. Constr Build Mater. 2023;367:130224.
30. Lv W, Sun Z, Su Z. Study of seawater mixed one-part alkali activated GGBFS-fly ash. Cem Concr Compos. 2020;106:103484.
31. Heikal M, Ali MA, Ghernaout D, Elboughdiri N, Ghernaout B, Bendary HI. Prolonging the durability of maritime constructions through a sustainable and salt-resistant cement composite. Materials. 2023;16(21):6876.
32. Alomayri T, Ali B, Raza SS, Ahmed H, Hamad M. Investigating the effects of polypropylene fibers on the mechanical strength, permeability, and erosion resistance of freshwater and seawater mixed concretes. J Mar Sci Eng. 2023;11(6):1224.
33. American Society for Testing and Materials. (2013). Standard practice for the preparation of substitute ocean water. ASTM International.
34. Zang X, Chen M, Miao Y, Zhao Z, Wu Z, Ren J, et al. Influence mechanism of nano-silica on the early-strength of high-fluidity slag and desulfurization gypsum composite alkali activated material. Science Technology and Engineering. 2024;24(23):10015–21 ((in Chinese)).
35. M.C.P.R. Testing method of cement and concrete for highway engineering. Beijing. JTG E30–2020.
36. Wongkvanklom A, Posi P, Bangsai C, Kasemsiri P, Foytong P, Rukzon S, et al. Utilization of seawater in high calcium fly ash alkali-activated paste cured at ambient temperature. Adv Concrete Constr. 2024;18(5):369.
37. Kang C, Kim T. Pore and strength characteristics of alkali-activated slag paste with seawater. Mag Concr Res. 2020;72(10):499–508.
38. Wang J, Liu E, Li L. Multiscale investigations on hydration mechanisms in seawater OPC paste. Constr Build Mater. 2018;191:891–903.
39. Hara H, Ikeda K, Yoshimoto N. Strength reduction mechanism of cement-treated soil under seawater environment. Soils Found. 2024;64(1):101425.
40. Wang Z, Ouyang G, Li Z, Sun T, Li W, Deng Y, et al. Excess-sulphate phosphogypsum slag cement blended with magnesium ion: Part II-the long-term microstructure characterisation and phase evolution. Constr Build Mater. 2024;431:136513.
41. Bertola F, Gastaldi D, Canonico F. Behavior of specialty binders mixed with seawater. Adv Civil Eng Mater. 2019;8(2):96–109.
42. Cheng S, Shui Z, Sun T, Huang Y, Liu K. Effects of seawater and supplementary cementitious materials on the durability and microstructure of lightweight aggregate concrete. Constr Build Mater. 2018;190:1081–90.
43. Sikora P, Lootens D, Liard M, Stephan D. The effects of seawater and nanosilica on the performance of blended cements and composites. Appl Nanosci. 2020;10:5009–26.
44. Li H, Liu F, Zhen H, Xiong Z, Song Y, Wang J, et al. Evaluating strength, hydration characteristics, microstructure evolution, and sustainability of seawater–sea sand cement-based materials containing iron ore tailings. Constr Build Mater. 2024;457:139163.
45. Jiang Z, Zhu Z, Accornero F, Wang C. Multi-technique analysis of seawater impact on the performance of calcium sulphoaluminate cement mortar. Constr Build Mater. 2024;443:137717.
46. Ren P, Ling TC. Roles of chlorine and sulphate in MSWIFA in GGBFS binder: Hydration, mechanical properties and stabilization considerations. Environ Pollut. 2021;284:117175.