journal article·2025-09-11Open access

Tensile strength-ductility properties of face-centered cubic deformation twin/matrix structures

M. S. Szczerba, M. Kowalska, S. Kopacz, M. J. Szczerba

Abstract

Abstract Large anisotropy of the tensile strength-ductility combination of the laminated twin/matrix (T/M) structure was found by studying the mechanical response of pre-twinned Cu-8at.%Al crystal structures, subjected to plastic tension under the different loading conditions. Three resolved shear stress-driven mechanisms, M1, M2, M3, were introduced to describe the deformation properties of the bimodal T/M structure. The “zero” tensile ductility (εT) accompanied by the tensile strength σT about 550 MPa or above 900 MPa was established when the T/M structure was loaded almost parallel (M3) or perpendicular (M1) to the T/M interface. Consequently, the T/M structure revealed the minimal (“zero”) tensile strength-ductility combination (σT × εT), when plastic yielding was initiated by M1 or M3 mechanism; both connected with T/M lattice shears occurring across the T/M interface. However, the T/M structure loaded at an angle about π/4 to the T/M interface revealed exceptionally large ductility (true strain equal to unity) accompanied by true stress of 850 MPa, i.e., the maximal combination σT × εT of 850 MPa, projected to about 1500 MPa for an analogous T/M structure of high manganese steels. All the “non-zero” cases of σT × εT were determined by activity of M2 mechanism, i.e., T/M lattice shear parallel to the T/M interface. The σT × εT values depended on the length of M2 deformation path terminated by a sudden entry of M3 (M1) mechanism. The entry, governed by the Schmid–Boas law, occurred always well before the Considère condition was met. The physical reasons of the observed anisotropy of the T/M structure are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Bouaziz O, Allain S, Scott CP, Cugy P, Barbier D. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships. Curr Opin Solid State Mater Sci. 2011;15(4):141–68. https://doi.org/10.1016/j.cossms.2011.04.002.10.1016/j.cossms.2011.04.002 ↗
2. De Cooman BC, Kwon O, Chin KG. State-of-the-knowledge on TWIP steel. Mater Sci Technol. 2012;28:513–27. https://doi.org/10.1179/1743284711Y.0000000095.10.1179/1743284711Y.0000000095 ↗
3. Wei YJ, Li YQ, Zhu LC, Liu Y, Lei XQ, Wang G, et al. Evading the strength- ductility trade-off dilemma in steel through gradient hierarchical nanotwins. Nat Commun. 2014;5:3580. https://doi.org/10.1038/ncomms4580.10.1038/ncomms4580 ↗
4. Sohrabi MJ, Mirzadeh H, Sadeghpour S, Geranmayeh AR, Mahmudi R. Tailoring the strength-ductility balance of a commercial austenitic stainless steel with combined TWIP and TRIP effects. Arch Civil Mech Eng. 2023;23:170. https://doi.org/10.1007/s43452-023-00718-3.10.1007/s43452-023-00718-3 ↗
5. Jabłońska MB. Effect of the conversion of the plastic deformation work to heat on the behaviour of TWIP steels: a review. Arch Civil Mech Eng. 2023;23:135. https://doi.org/10.1007/s43452-023-00656-0.10.1007/s43452-023-00656-0 ↗
6. Soleimani M, Kalhor A, Mirzadeh H. Transformation-induced plasticity (TRIP) in advanced steels: A review. Mater Sci Eng A. 2020;795:140023. https://doi.org/10.1016/j.msea.2020.140023.10.1016/j.msea.2020.140023 ↗
7. Han PC, Tao NR. Effect of deformation mechanisms on the strength-ductility trade-off of Cu and Cu-Al alloy. Scripta Mater. 2022;212:114559. https://doi.org/10.1016/j.scriptamat.2022.114559.10.1016/j.scriptamat.2022.114559 ↗
8. Tayyebi M, DerakhshaniMolayousefi M. A review on the effect of various rolling regimes (cryo, cold, warm, hot) and post-annealing on high-entropy alloys: microstructure evolution, deformation mechanisms, and mechanical properties. Arch Civ Mech Eng. 2024;24:16. https://doi.org/10.1007/s43452-023-00826-0.10.1007/s43452-023-00826-0 ↗
9. Wagner C, George EP, Laplanche G. Effects of grain size and stacking fault energy on twinning stresses of single-phase Crx Mn20Fe20Co20Ni40-x high-entropy alloys. Acta Mater. 2025;282:120470. https://doi.org/10.1016/j.actamat.2024.120470.10.1016/j.actamat.2024.120470 ↗
10. Idrissi H, Renard K, Ryelandt L, Schryvers D, Jacques PJ. On the mechanism of twin formation in Fe-Mn-C TWIP steels. Acta Mater. 2010;58:2464–76. https://doi.org/10.1016/j.actamat.2009.12.032.10.1016/j.actamat.2009.12.032 ↗
11. Kozłowska A, Stawarczyk P, Grajcar A, Radwański K, Matus K, Samek L. Microstructure evolution and strain hardening behavior of thermomechanically processed low-C high-manganese steels: an effect of deformation temperature. Arch Civil Mech Eng. 2023;23:184. https://doi.org/10.1007/s43452-023-00722-7.10.1007/s43452-023-00722-7 ↗
12. Hong CS, Tao NR, Huang X, Lu K. Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu–Al alloy processed by dynamic plastic deformation. Acta Mater. 2010;58:3103–16. https://doi.org/10.1016/j.actamat.2010.01.049.10.1016/j.actamat.2010.01.049 ↗
13. Venables A. The electron microscopy of deformation twinning. J Phys Chem Solids. 1964;25:685–92. https://doi.org/10.1016/0022-3697(64)90177-5.10.1016/0022-3697(64)90177-5 ↗
14. Niewczas M. Dislocations and twinning in face centered cubic crystals. In: Nabarro FRN, Hirth JP, editors. Dislocations in solids, 13. Amsterdam: Elsevier; 2007. p. 263–364.
15. Szczerba MS, Kopacz S, Szczerba MJ. A study on crystal plasticity of face-centered cubic structures induced by deformation twinning. Acta Mater. 2020;197:146–62. https://doi.org/10.1016/j.actamat.2020.07.040.10.1016/j.actamat.2020.07.040 ↗
16. Thompson N. Dislocation nodes in face-centred cubic lattices. Proc Phys Soc B. 1953;66:481–93. https://doi.org/10.1088/0370-1301/66/6/304.10.1088/0370-1301/66/6/304 ↗
17. Schmid E, Boas W. Plasticity of crystals. London: F.A. Hughes; 1950.
18. Szczerba MS, Kopacz S, Szczerba MJ. On the reverse mode of FCC deformation twinning. Acta Mater. 2012;60:6413–20. https://doi.org/10.1016/j.actamat.2012.08.028.10.1016/j.actamat.2012.08.028 ↗
19. Szczerba MJ, Kopacz S, Szczerba MS. Experimental studies on detwinning of face-centered deformation twins. Acta Mater. 2016;104:52–61. https://doi.org/10.1016/j.actamat.2015.11.025.10.1016/j.actamat.2015.11.025 ↗
20. Szczerba MS, Szczerba MJ. The effect of temperature on detwinning and mechanical properties of face-centered cubic deformation twins. Acta Mater. 2024;263:119491. https://doi.org/10.1016/j.actamat.2023.119491.10.1016/j.actamat.2023.119491 ↗
21. Christian JW. The theory of transformations in metals and alloys. Oxford: Pergamon Press; 1965.
22. Bilby BA, Crocker AG. Theory of crystallography of deformation twinning. Proc R Soc A. 1965;288:240–55. https://doi.org/10.1098/rspa.1965.0216.10.1098/rspa.1965.0216 ↗
23. Hirth JP, Lothe J. Theory of dislocations. New York: Wiley; 1982.
24. Szczerba MS, Bajor T, Tokarski T. Is there a critical resolved shear stress for twinning in face-centred cubic crystals? Phil Mag. 2004;21:481–502. https://doi.org/10.1080/14786430310001612175.10.1080/14786430310001612175 ↗
25. Basinski ZS, Szczerba MS, Niewczas M, Embury JD, Basinski SJ. Transformation of slip dislocations during twinning of copper-aluminum alloy crystals. Rev Metall Sci Gen Mater. 1997;94:1037–43. https://doi.org/10.1051/metal/199794091037.10.1051/metal/199794091037 ↗
26. Szczerba MS, Tokarski T, Perek M. < 100> Burgers vector dislocations inherited by second overshoot FCC twinning. Arch Metall Mater. 2007;52:193–201.
27. Basinski ZS, Szczerba MS, Embury JD. Dislocation mechanisms for twinning in BCC and FCC crystals. In: Yoo MH, Wuttig M, editors. Twinning in advanced materials. Warrendale: TMS; 1994. p. 69–73.
28. Howie A, Swann PR. Direct measurements of stacking-fault energies from observations of dislocation nodes. Philos Mag. 1961;6:1215–26. https://doi.org/10.1080/14786436108243372.10.1080/14786436108243372 ↗
29. Basinski ZS, Szczerba MS, Embury JD. Tensile instability in face-centred cubic materials. Philos Mag A. 1997;76(4):743–52. https://doi.org/10.1080/01418619708214207.10.1080/01418619708214207 ↗
30. Szczerba M, Korbel A. Strain softening and instability of plastic flow in Cu-Al single crystals. Acta Metall. 1987;35:1129–35. https://doi.org/10.1016/0001-6160(87)90060-5.10.1016/0001-6160(87)90060-5 ↗
31. Korbel A, Szczerba M. Strain softening and twinning in fcc crystals. Scripta Metall. 1988;22:1425–9. https://doi.org/10.1016/s0036-9748(88)80013-9.10.1016/s0036-9748(88)80013-9 ↗
32. Szczerba MS. On the behaviour of mechanical twinning in Cu-Al single crystals. Mater Sci Eng A. 1997;234–236:1057–61. https://doi.org/10.1016/S0921-5093(97)00298-0.10.1016/S0921-5093(97)00298-0 ↗
33. Szczerba MS. Transformations of dominant deformation systems in copper single crystals. Arch Metall. 2001;46:53–64.
34. Basinski ZS, Basinski SJ. Quantitative determination of secondary slip in copper single crystals deformed in tension. Phil Mag. 2004;84:213–51. https://doi.org/10.1080/14786430310001612184.10.1080/14786430310001612184 ↗
35. Szczerba MS, Pałka P. Experimental studies of a change of dominant slip system in tensile Cu-6at.%Al single crystals. Arch Metall Mater. 2009;54:57–64.
36. Szczerba MS, Pałka P. Quantitative determination of a change of dominant slip system in tensile FCC single crystals. J Phys Conf. 2010;240:012129. https://doi.org/10.1088/1742-6596/240/1/012129.10.1088/1742-6596/240/1/012129 ↗
37. Szczerba MJ, Sumara S, Faryna M, Szczerba MS. Detwinning of face-centered cubic deformation twins at liquid nitrogen temperature. Mater Sci Eng, A. 2022;832:142395. https://doi.org/10.1016/j.msea.2021.142395.10.1016/j.msea.2021.142395 ↗
38. Basinski ZS, Jackson PJ. The instability of the work hardened state. II. Slip in “alien” dislocation distributions. Physica status Solidi (b). 1965;10:45–56. https://doi.org/10.1002/pssb.19650100105.10.1002/pssb.19650100105 ↗
39. Wessels EJH, Jakson PJ. Latent hardening in copper-aluminium alloys. Acta Metall. 1969;17:241–8. https://doi.org/10.1016/0001-6160(69)90064-9.10.1016/0001-6160(69)90064-9 ↗
40. Wessels EJH, Nabarro FRN. The hardening of latent glide systems in single crystals of copper-aluminium alloys. Acta Metall. 1971;19:903–14. https://doi.org/10.1016/0001-6160(71)90083-6.10.1016/0001-6160(71)90083-6 ↗
41. Havner KS, Baker GS, Vause RF. Theoretical latent hardening in crystals -I. General equations for tension and compression with application to FCC crystals in tension. J Mech Phys Solids. 1979;27:33–50.10.1016/0022-5096(79)90009-7 ↗
42. Franciosi P, Berveiller M, Zaoui A. Latent hardening in copper and aluminium single crystals. Acta Metall. 1980;28:273–83. https://doi.org/10.1016/0001-6160(80)90162-5.10.1016/0001-6160(80)90162-5 ↗
43. Peirce D, Asaro RJ, Needleman A. An analysis of nonuniform and localized deformation in ductile single crystals. Acta Metall. 1982;30:1087–119. https://doi.org/10.1016/0001-6160(82)90005-0.10.1016/0001-6160(82)90005-0 ↗
44. Szczerba MJ, Kopacz S, Szczerba MS. Detwinning of face-centered cubic deformation twins via the correspondence matrix approach. Acta Mater. 2016;102:162–8. https://doi.org/10.1016/j.actamat.2015.09.020.10.1016/j.actamat.2015.09.020 ↗
45. Taylor GI. Plastic strain in metals. J Inst Met. 1938;62:307–24.
46. Bishop JFW, Hill R. A theoretical derivation of the plastic properties of a polycrystalline face-centred metal. Phil Mag. 1951;42:1298–307. https://doi.org/10.1080/14786444108561385.10.1080/14786444108561385 ↗
47. Szczerba MJ, Szczerba MS. Slip versus twinning in low and very low stacking-fault energy Cu-Al alloy single crystals. Acta Mater. 2017;133:109–19. https://doi.org/10.1016/j.actamat.2017.05.011.10.1016/j.actamat.2017.05.011 ↗
48. Wessels EH, Nabarro FRN. Theory of unstable glide in presence of a dense dislocation forest. Acta Metall. 1971;19:915–21. https://doi.org/10.1016/0001-6160(71)90084-8.10.1016/0001-6160(71)90084-8 ↗