journal article·2025-08-02Open access

Analyzing fracture mechanism of high performance concrete using concrete damage plasticity model

Hassan Abdolpour, Bartłomiej Sawicki

Abstract

Abstract High-performance concretes are increasingly employed in various civil engineering applications due to their exceptional short- and long-term performance. As a result, there is a significant need for simplified numerical simulation methods to effectively interpret the mechanical and fracture behavior of these materials under different loading conditions. This paper evaluates the mechanical performance of several concrete types, specifically normal concrete (NC), steel fiber high performance concrete (SFHPC), recycled steel fiber high performance concrete (RSFHPC), and ultra-high performance fiber reinforced concrete (UHPFRC). A four-linear curve model created from experimental data is suggested to make it easier to design material models in finite element modeling (FEM) software. Even though first comparisons with experimental results showed a good degree of agreement, the authors admitted that more experimental research would strengthen the model’s robustness. The goal of future research will be to methodically examine the variables affecting the predictions made by the four-linear model. The concrete damage plasticity (CDP) model is employed to simulate the nonlinear behavior of these concrete types, while the element deletion approach (EDA) is utilized to further simulate the fracture behavior of specimens under compressive loads. The results indicate that the proposed methods, including CDP and EDA, accurately predict the failure modes and behaviors of the concrete specimens. Additionally, parametric research was conducted to assess and compare the benefits of each concrete type in enhancing the shear resistance of beams without the use of shear stirrups.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Zollo RF. Fiber-reinforced concrete: an overview after 30 years of development. Cem Concr Compos. 1997;19(2):107–22. https://doi.org/10.1016/S0958-9465(96)00046-7.10.1016/S0958-9465(96)00046-7 ↗
2. Elliott KS, Peaston CH, Paine KA. Experimental and theoretical investigation of the shear resistance of steel fibre reinforced prestressed concrete X-beams—part II: theoretical analysis and comparison with experiments. Mater Struct. 2002;35(9):528–35.10.1007/BF02483120 ↗
3. Bao X, Li Y, Zhang X, Wu X, Chen X, Cui H. Mechanical behaviors of hybrid fiber-rebar reinforced concrete lining under ground surcharge loads—3D numerical simulation combined with full-scale test. Eng Struct. 2025;334: 120257. https://doi.org/10.1016/J.ENGSTRUCT.2025.120257.10.1016/J.ENGSTRUCT.2025.120257 ↗
4. Wang H, Belarbi A. Ductility characteristics of fiber-reinforced-concrete beams reinforced with FRP rebars. Constr Build Mater. 2011;25(5):2391–401.10.1016/j.conbuildmat.2010.11.040 ↗
5. Gong C, Ding W, Mosalam KM, Günay S, Soga K. Comparison of the structural behavior of reinforced concrete and steel fiber reinforced concrete tunnel segmental joints. Tunnel Undergr Space Technol. 2017;68:38–57.10.1016/j.tust.2017.05.010 ↗
6. Roque R, Kim N, Kim B, Lopp G. Durability of fiber-reinforced concrete in Florida environments; 2009.
7. Barros JAO, Sena-Cruz J. Fracture energy of steel fiber-reinforced concrete; 2001.10.1080/107594101459815 ↗
8. Savinykh AS, Garkushin GV, Kanel GI, Razorenov SV. Compressive and tensile strength of steel fibrous reinforced concrete under explosive loading. Int J Fract. 2019;215(1):129–38. https://doi.org/10.1007/s10704-018-00342-w.10.1007/s10704-018-00342-w ↗
9. Olivito RS, Zuccarello FA. An experimental study on the tensile strength of steel fiber reinforced concrete. Compos B Eng. 2010;41(3):246–55.10.1016/j.compositesb.2009.12.003 ↗
10. Jiang F, Mao Z, Deng M, Li D. Deformation and compressive strength of steel fiber reinforced MgO concrete. Materials. 2019. https://doi.org/10.3390/ma12213617.10.3390/ma12213617 ↗
11. Wille K, Naaman AE, Parra-Montesinos GJ. Ultra-high performance concrete with compressive strength exceeding 150 MPa (22 ksi): a simpler way. ACI Mater J. 2011;108(1):46–54.
12. Sudarshan NM, Rao TC. Experimental investigations on tensile strength behavior and microstructure of ultra-high-performance fiber-reinforced concrete. SN Appl Sci. 2019;1(3): 215. https://doi.org/10.1007/s42452-019-0186-0.10.1007/s42452-019-0186-0 ↗
13. Alsalman A, Dang CN, Prinz GS, Hale WM. Evaluation of modulus of elasticity of ultra-high performance concrete. Constr Build Mater. 2017;153:918–28.10.1016/j.conbuildmat.2017.07.158 ↗
14. Zhang Y, Xin H, Correia JAFO. Fracture evaluation of ultra-high-performance fiber reinforced concrete (UHPFRC). Eng Fail Anal. 2021;120: 105076. https://doi.org/10.1016/j.engfailanal.2020.105076.10.1016/j.engfailanal.2020.105076 ↗
15. Rezakhani R, Scott DA, Bousikhane F, Pathirage M, Moser RD, Green BH, Cusatis G. Influence of steel fiber size, shape, and strength on the quasi-static properties of ultra-high performance concrete: experimental investigation and numerical modeling. Constr Build Mater. 2021;296: 123532. https://doi.org/10.1016/j.conbuildmat.2021.123532.10.1016/j.conbuildmat.2021.123532 ↗
16. Mahmud GH, Hassan AMT, Jones SW, Schleyer GK. Experimental and numerical studies of ultra high performance fibre reinforced concrete (UHPFRC) two-way slabs. Structures. 2021;29:1763–78. https://doi.org/10.1016/j.istruc.2020.12.053.10.1016/j.istruc.2020.12.053 ↗
17. Shen X, Brühwiler E, Denarié E, Peng W. An analytical inverse analysis to determine equi-biaxial tensile properties of strain-hardening UHPFRC from ring-on-ring test. Mater Struct. 2020;53(5): 123. https://doi.org/10.1617/s11527-020-01553-1.10.1617/s11527-020-01553-1 ↗
18. Curosu I, Liebscher M, Burk S, Li H, Hempel S, Raak N, Rohm H, Mechtcherine V. Influence of fiber type on the tensile behavior of high-strength strain-hardening cement-based composites (SHCC) at elevated temperatures. Mater Des. 2021;198: 109397. https://doi.org/10.1016/J.MATDES.2020.109397.10.1016/J.MATDES.2020.109397 ↗
19. Abdolpour H, Niewiadomski P, Sadowski Ł, Hojdys Ł, Krajewski P, Kwiecień A. Fracture mechanics of sustainable ultra high performance repair mortar with flexible joints. Eng Fract Mech. 2025;325: 111331. https://doi.org/10.1016/J.ENGFRACMECH.2025.111331.10.1016/J.ENGFRACMECH.2025.111331 ↗
20. Tahenni T, Bouziadi F, Boulekbache B, Amziane S. Experimental and numerical investigation of the effect of steel fibres on the deflection behaviour of reinforced concrete beams without stirrups. Struct. 2021;33:1603–19. https://doi.org/10.1016/j.istruc.2021.05.005.10.1016/j.istruc.2021.05.005 ↗
21. Li X, Zhang Y, Shi C, Chen X. Experimental and numerical study on tensile strength and failure pattern of high performance steel fiber reinforced concrete under dynamic splitting tension. Constr Build Mater. 2020;259: 119796. https://doi.org/10.1016/J.CONBUILDMAT.2020.119796.10.1016/J.CONBUILDMAT.2020.119796 ↗
22. He J, Chao L. Numerical analysis on shear resistance of ultra-high performance concrete-normal strength concrete composite beam. Struct Concr. 2021;22(2):1128–46.10.1002/suco.202000502 ↗
23. Abdolpour H, Niewiadomski P, Kwiecień A, Tekieli M, Sadowski Ł. Fundamental understanding of the mechanical and post-cracking behaviour of ultra-high performance mortar with recycled steel fibers. Constr Build Mater. 2023;374: 130918. https://doi.org/10.1016/J.CONBUILDMAT.2023.130918.10.1016/J.CONBUILDMAT.2023.130918 ↗
24. Lubliner J, Oliver J, Oller S, Oñate E. A plastic-damage model for concrete. Int J Solids Struct. 1989;25(3):299–326. https://doi.org/10.1016/0020-7683(89)90050-4.10.1016/0020-7683(89)90050-4 ↗
25. ABAQUS. Dassault Systèmes Simulia Corp.; 2020.
26. Singh M, Sheikh AH, Mohamed Ali MS, Visintin P, Griffith MC. Experimental and numerical study of the flexural behaviour of ultra-high performance fiber reinforced concrete beams. Constr Build Mater. 2017;138:12–25. https://doi.org/10.1016/J.CONBUILDMAT.2017.02.002.10.1016/J.CONBUILDMAT.2017.02.002 ↗
27. Hassan AMT, Jones SW, Mahmud GH. Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC). Constr Build Mater. 2012;37:874–82.10.1016/j.conbuildmat.2012.04.030 ↗
28. Soltanzadeh F. High performance fiber reinforced concrete for the replacement of shear stirrups; 2016.
29. Zamanzadeh Z. Cement based materials reinforced with recycled steel fibres: mechanical, durability and structural performance; 2017.
30. Vandewalle L, Nemegeer D, Balazs L, Barr B, Bartos P, Banthia N, Brandt A, Criswell M, Denarie E, Di Prisco M. Recommendations of RILEM TC 162-TDF: σ–ε design method. Mater Struct/Mater Constr. 2000;33(226):75–81.
31. ASTM C39/C39M-14a. In Standard A., C39/C39M-14a. www.astm.org; 2008.
32. Genikomsou AS, Polak MA. Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS. Eng Struct. 2015;98:38–48.10.1016/j.engstruct.2015.04.016 ↗
33. Abhaee S. Investigation of fiber-reinforced concrete crack width measurement by finite element method; 2016.
34. Hafezolghorani M, Hejazi F, Vaghei R, Jaafar MSB, Karimzade K. Simplified damage plasticity model for concrete. Struct Eng Int. 2017;27(1):68–78.10.2749/101686616X1081 ↗
35. Allam SM, Shoukry MS, Rashad GE, Hassan AS. Evaluation of tension stiffening effect on the crack width calculation of flexural RC members. Alex Eng J. 2013;52(2):163–73.10.1016/j.aej.2012.12.005 ↗
36. Zamanzadeh Z, Lourenço L, Barros J. Recycled steel fibre reinforced concrete failing in bending and in shear. Constr Build Mater. 2015;85:195–207. https://doi.org/10.1016/j.conbuildmat.2015.03.070.10.1016/j.conbuildmat.2015.03.070 ↗