A comparative study on the microstructure and mechanical properties of friction stir welded martensitic ultra-high-strength steel joints using PCBN and WC–Co tools
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Ramesh R, Dinaharan I, Kumar R, et al. Microstructure and mechanical characterization of friction stir welded high strength low alloy steels. Mater Sci Eng A. 2017;687:39–46. https://doi.org/10.1016/j.msea.2017.01.050.10.1016/j.msea.2017.01.050 ↗
2. Jiamin S, Klaus D. Influence of preheating on residual stresses in ultra-high strength steel welded components. J Mater Res Technol. 2023;25:3120–36. https://doi.org/10.1016/j.jmrt.2023.06.181.10.1016/j.jmrt.2023.06.181 ↗
3. Wu Z, Ushioda K, Fuji H. Mechanism of suppressing HAZ softening in friction stir welded martensitic steel through hardening phenomenon initiated by adding vanadium. J Mater Res Technol. 2023; 26:1151–67. https://doi.org/10.1016/j.jmrt.2023.07.115.10.1016/j.jmrt.2023.07.115 ↗
4. Peng Y, Li ZX, Guo W, et al. Modeling of interfacial void closure and prediction of bonding time in solid-state diffusion bonding. J Mater Process Tech. 2024;324: 118257. https://doi.org/10.1016/j.jmatprotec.2023.118267.10.1016/j.jmatprotec.2023.118267 ↗
5. Ebbert C, Schmidt HC, Rodman D, et al. Joining with electrochemical support (ECUF): cold pressure welding of copper. J Mater Process Technol. 2014;214(10):2179–87. https://doi.org/10.1016/j.jmatprotec.2014.04.015.10.1016/j.jmatprotec.2014.04.015 ↗
6. Jiang H, Du W, Wang S, et al. Innovative design of a separatable coil for tube frame structure in magnetic pulse crimping. J Manuf Process. 2024;125:538–51. https://doi.org/10.1016/j.jmapro.2024.07.079.10.1016/j.jmapro.2024.07.079 ↗
7. Jin J, Liao Y, Qin J, et al. A novel electromagnetic self-pierce upsetting riveting with flat die for joining ultra-high strength steel and aluminum structures. J Mater Process Technol. 2025;336: 118691. https://doi.org/10.1016/j.jmatprotec.2024.118691.10.1016/j.jmatprotec.2024.118691 ↗
8. Gao Z, Wang H, Ren P, et al. Metainterfaces with mechanical, thermal, and active programming properties based on programmable orientation-distributed biometric architectonics. Mater Horiz. 2024;11(17):4037–53. https://doi.org/10.1039/D4MH00570H.10.1039/D4MH00570H ↗
9. Liu FC, Feng AH, Pei X et al. Friction stir based welding, processing, extrusion and additive manufacturing. Prog Mater Sci. 2024;101330. https://doi.org/10.1016/j.pmatsci.2024.101330.10.1016/j.pmatsci.2024.101330 ↗
10. Cui H, Xie G, Luo Z, et al. Microstructural evolution and mechanical properties of the stir zone in friction stir processed AISI201 stainless steel. Mater Des. 2016;106:463–75. https://doi.org/10.1016/j.matdes.2016.05.106.10.1016/j.matdes.2016.05.106 ↗
11. Zhu S, Wang N, Li S, et al. Study on the materials flow, microstructure and mechanical properties of ultrasonic vibration-assisted friction stir weld of 1500 MPa martensitic steel. Mater Charact. 2023;206: 113409. https://doi.org/10.1016/j.matchar.2023.113409.10.1016/j.matchar.2023.113409 ↗
12. Ragab M, Liu H, Ahmed MMZ, et al. Microstructure evolution during friction stir welding of 1Cr11Ni2W2MoV martensitic stainless steel at different tool rotation rates. Mater Charact. 2021;182: 111561. https://doi.org/10.1016/j.matchar.2021.111561.10.1016/j.matchar.2021.111561 ↗
13. Shankar S, Mehta KP, Chattopadhyaya S, et al. Dissimilar friction stir welding of Al to non-Al metallic materials: an overview. Mater Chem Phys. 2022;288: 126371. https://doi.org/10.1016/j.matchemphys.2022.126371.10.1016/j.matchemphys.2022.126371 ↗
14. Khalaf HI, Al-Sabur R, Derazkola HA. Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds. Arch Civil Mech Eng. 2023;23(2): 125. https://doi.org/10.1007/s43452-023-00673-z.10.1007/s43452-023-00673-z ↗
15. Fuller CB. Friction stir tooling: tool materials and designs. Friction Stir Welding Process. 2007;7.
16. Sato YS, Arkom P, Kokawa H et al, et al. Effect of microstructure on properties of friction stir welded Inconel Alloy 600. Mater Sci Eng A. 2008;477(1–2):250–8. https://doi.org/10.1016/j.msea.2007.07.002.10.1016/j.msea.2007.07.002 ↗
17. Thompson BT, Babu SS, Lolla T. Application of diffusion models to predict FSW tool wear. In: Proceedings of the 21st international offshore and polar engineering conference. Maui, Hawaii, USA; 2011 June 19–24. p. 520.
18. Sato YS, Miyake M, Kokawa H, et al. Development of a cobalt-based alloy FSW tool for high-softening-temperature materials. Friction Stir Welding Process VI. 2011:1–9. https://doi.org/10.1002/978111806230210.1002/9781118062302 ↗
19. NakaZama T, Sato YS, Kokawa H, et al. Friction stir welding of steels using a tool made of iridium-containing nickel base superalloy. Friction Stir Welding Processing VIII. 2015:77–82.10.1002/9781119093343.ch8 ↗
20. Sun S, Wang Z, Zhou L, et al. Microstructure evolution and mechanical properties of friction stir welded Fe50Mn30Co10Cr10 high-entropy alloy. J Mater Process Technol. 2023;322: 118209. https://doi.org/10.1016/j.jmatprotec.2023.118209.10.1016/j.jmatprotec.2023.118209 ↗
21. Savolainen K. Friction stir welding of copper and microstructure and properties of the welds. Aalto University; 2010. ISBN 978-952-60-4500-9.
22. Cederqvist L. A weld that lasts for 100,000 years: FSW of copper canisters. In: 4th international symposium on friction stir welding. Park City, Utah, USA; 2003 April.10.1557/PROC-807-477 ↗
23. Gant AJ, Morrell R, Wronski AS, et al. Edge toughness of tungsten carbide based hardmetals. Int J Refract Met Hard Mater. 2018;75:262–78. https://doi.org/10.1016/j.ijrmhm.2017.12.020.10.1016/j.ijrmhm.2017.12.020 ↗
24. Ghosh M, Kumar K, Mishra RS. Optimization for friction-stir-welded martensitic steel. Metall Mater Trans A. 2012;43:1966–75. https://doi.org/10.1007/s11661-012-1084-x.10.1007/s11661-012-1084-x ↗
25. Matsushita M, Kitani Y, Ikeda R, et al. Development of friction stir welding of high strength steel sheet. Sci Technol Weld Join. 2011;16(2):181–7. https://doi.org/10.1179/1362171810Y.0000000026.10.1179/1362171810Y.0000000026 ↗
26. Kumar SS, Murugan N, Ramachandran KK. Influence of tool material on mechanical and microstructural properties of friction stir welded 316L austenitic stainless steel butt joints. Int J Refract Met Hard Mater. 2016;58:196–205. https://doi.org/10.1016/j.ijrmhm.2016.04.015.10.1016/j.ijrmhm.2016.04.015 ↗
27. Manugula VL, Rajulapati KV, Reddy GM, et al. A critical assessment of the microstructure and mechanical properties of friction stir welded reduced activation ferritic–martensitic steel. Mater Des. 2016;92:200–12. https://doi.org/10.1016/j.matdes.2015.12.019.10.1016/j.matdes.2015.12.019 ↗
28. Bae DS, Lee JK. Effect of surface roughness on fatigue strength in martensitic stainless steel. Int J Precis Eng Manuf. 2024(10). https://doi.org/10.1007/s12541-024-01079-4.10.1007/s12541-024-01079-4 ↗
29. Miyano Y, Washiya H, Sato H, et al. Friction stir welding of 1.4 GPa-grade tempered martensitic steel. ISIJ Int. 2024: ISIJINT-2024. https://doi.org/10.2355/tetsutohagane.TETSU-2022-045.10.2355/tetsutohagane.TETSU-2022-045 ↗
30. Hidalgo J, Findley KO, Santofimia MJ. Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering. Mater Sci Eng A. 2017;690:337–47. https://doi.org/10.1016/j.msea.2017.03.017.10.1016/j.msea.2017.03.017 ↗
31. Cui HB, Lu Y, Xie GM. The study on martensite morphology in the stir zone and its influence to impact toughness during friction stir welding medium–Mn ultrahigh strength steel. Mater Sci Eng A. 2020;798: 140102. https://doi.org/10.1016/j.msea.2020.140102.10.1016/j.msea.2020.140102 ↗
32. He B, Cui L, Wang D, et al. The metallurgical bonding and high temperature tensile behaviors of 9Cr 1W steel and 316L steel dissimilar joint by friction stir welding. J Manuf Process. 2019;44:241–51. https://doi.org/10.1016/j.jmapro.2019.05.033.10.1016/j.jmapro.2019.05.033 ↗
33. Zhang HJ, Wang M, Zhu Z, et al. Nugget structure evolution with rotation speed for high-rotation-speed friction-stir-welded 6061 aluminum alloy. J Mater Eng Perform. 2018;27:1378–86. https://doi.org/10.1007/s11665-018-3704-0.10.1007/s11665-018-3704-0 ↗
34. Shah LHA, Hou W, Razmpoosh MH, et al. Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity. J Mater Res Technol. 2022;21:1434–41. https://doi.org/10.1016/j.jmrt.2022.09.097.10.1016/j.jmrt.2022.09.097 ↗
35. Mahmoudiniya M, Kestens LAI. Microstructural development and texture evolution in the stir zone and thermomechanically affected zone of a ferrite-martensite steel friction stir weld. Mater Charact. 2021;175: 111053. https://doi.org/10.1016/j.matchar.2021.111053.10.1016/j.matchar.2021.111053 ↗
36. Luo H, Wang X, Liu Z, et al. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel. J Mater Sci Technol. 2020;51:130–6. https://doi.org/10.1016/j.jmst.2020.04.001.10.1016/j.jmst.2020.04.001 ↗
37. Wang H, Webb T, Bitler JW. Study of thermal expansion and thermal conductivity of cemented WC–Co composite. Int J Refract Met Hard Mater. 2015;49:170–7. https://doi.org/10.1016/j.ijrmhm.2014.06.009.10.1016/j.ijrmhm.2014.06.009 ↗
38. Wang W, Li Z, Zhu Y, et al. Effect of diamond additive on the properties of cBN composites with Al–Si as binder by HTHP sintering. Ceram Int. 2022;48(19):28830–4. https://doi.org/10.1016/j.ceramint.2022.03.028.10.1016/j.ceramint.2022.03.028 ↗
39. Joshi SS, Patil SM, Mazumder S, et al. Additive friction stir deposition of AZ31B magnesium alloy. J Magnes Alloys. 2022;10(9):2404–20. https://doi.org/10.1016/j.jma.2022.03.011.10.1016/j.jma.2022.03.011 ↗
40. Schmidt H, Hattel J, Wert J. An analytical model for the heat generation in friction stir welding. Model Simul Mater Sci Eng. 2003;12(1):143. https://doi.org/10.1088/0965-0393/12/1/013.10.1088/0965-0393/12/1/013 ↗
41. Gee M, Mingard K, Nunn J, et al. In situ scratch testing and abrasion simulation of WC/Co. Int J Refract Met Hard Mater. 2017;62:192–201. https://doi.org/10.1016/j.ijrmhm.2016.06.004.10.1016/j.ijrmhm.2016.06.004 ↗
42. Steel R, Packer S, Larsen S, et al. 11th international symposium on friction stir welding, Cambridge, UK; 2016.
43. Mahoney M, Nelson TW, Sorensen C, et al. Friction stir welding of ferrous alloys: current status. In: Materials Science Forum. Vol. 638. Trans Tech Publications Ltd; 2010:41–46. https://doi.org/10.4028/www.scientific.net/MSF.638-642.41.10.4028/www.scientific.net/MSF.638-642.41 ↗
44. Milman YV, Luyckx S, Northrop IT. Influence of temperature, grain size and cobalt content on the hardness of WC–Co alloys. Int J Refract Met Hard Mater. 1999;17(1–3):39–44. https://doi.org/10.1016/S0263-4368(98)00038-9.10.1016/S0263-4368(98)00038-9 ↗
45. Lin N, He Y, Wu C, et al. Influence of copper content on the microstructure and hardness of copper-doped tungsten carbide-cobalt bulk at the elevated temperature. Int J Refract Met Hard Mater. 2013;38:140–3. https://doi.org/10.1016/j.ijrmhm.2013.01.010.10.1016/j.ijrmhm.2013.01.010 ↗
46. Ashrafi H, Shamanian M, Sanayei M, et al. EBSD characterization of microstructure and micro-texture in a friction stir-welded DP600 steel. Acta Metall Sin (Engl Lett). 2023;36:789–802. https://doi.org/10.1007/s40195-023-01521-y.10.1007/s40195-023-01521-y ↗
47. Meyghani B, Awang MB, Poshteh RGM, et al. The effect of friction coefficient in thermal analysis of friction stir welding (FSW). IOP Conf Ser Mater Sci Eng. 2019;495: 012102. https://doi.org/10.1088/1757-899X/495/1/012102.10.1088/1757-899X/495/1/012102 ↗
48. Meyghani B, Awang M, Emamian S. A mathematical formulation for calculating temperature dependent friction coefficient values: application in friction stir welding (FSW). Defect Diffus Forum. 2017;379:73–82. https://doi.org/10.4028/www.scientific.net/ddf.379.73.10.4028/www.scientific.net/ddf.379.73 ↗
49. Pandit SM, Kashou S. Variation in friction coefficient with tool wear. Wear. 1983;84(1):65–79. https://doi.org/10.1016/0043-1648(83)90119-9.10.1016/0043-1648(83)90119-9 ↗
50. Cahill JT, Du Frane WL, Sio CK, et al. Transformation of boron nitride from cubic to hexagonal under 1-atm helium. Diamond Relat Mater. 2020;109: 108078. https://doi.org/10.1016/j.diamond.2020.108078.10.1016/j.diamond.2020.108078 ↗