journal article·2025-05-27Open access

Probabilistic analysis of crack width and deflection of an anchored diaphragm wall installed in sands

Marek Kawa, Wojciech Puła, Andrzej Truty

Abstract

Abstract This paper deals with the probabilistic modelling of an anchored diaphragm wall installed in normally consolidated sand. The analysis uses the random finite element method and is based on N = 1000 Monte Carlo simulations. The model's geometry is based on the benchmark of the triple-anchored wall installed in the Berlin sand, published by Schweiger (Part i: Results of benchmarking. Part ii: Reference solution and parametric study. Technical Report CGG_IR006_2002, Institute for Soil Mechanics and Foundation Engineering, Graz University of Technology, Austria, 2002). A single spatially variable soil layer is assumed. The variability of the soil is modelled by two random fields that describe the normalised CPTu parameters $${Q}_{\text{tn}}$$ and $${F}r$$. The probability distribution, cross-correlation coefficient and vertical scales of fluctuations SOF for both random fields are identified based on CPTu tests from the central part of Poland. The Hardening Soil-brick model is used as the constitutive model of the soil. Its parameters are derived based on local values of normalised corrected tip resistance $${Q}_{\text{tn}}$$ and normalised friction ratio $${F}r$$ according to the correlations found for this soil type by Truty (Sci Rep 140(1):15102, 2024). Based on the initial analysis conducted for mean soil parameters, steel reinforcement for the wall has been designed. The probabilistic analysis involves both the ultimate (ULS) and the serviceability (SLS) limit states; however, it is focused on the latter. In particular, the crack width and the wall deflection are investigated. The estimation of system probability considering both SLSs is based on the Nataf transformations. As shown, both states can significantly impact the failure’s probability, resulting in the system failure probability being substantially more significant than that for individual SLS.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geotechnical Engineering and Analysis · Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Fenton GA, Griffiths DV. Risk assessment in geotechnical engineering. Hoboken: Wiley; 2008.10.1002/9780470284704 ↗
2. ISO:2394. General principles on reliability for structures ISO 2394: 2015. International Organization for Standardization, Switzerland; 2015.
3. van Den Eijnden B, Knuuti M, Lesny K, Löfman M, Mavritsakis A, Roubos A, et al. Reliability-based verification of limit states for geotechnical structures. In: European Commission–Joint Research Centre (JRC). Publications Office of the European Union Luxembourg; 2024.
4. Chwała M. Undrained bearing capacity of spatially random soil for rectangular footings. Soils Found. 2019;59(5):1508–21.10.1016/j.sandf.2019.07.005 ↗
5. Griffiths DV, Fenton GA. Seepage beneath water retaining structures founded on spatially random soil. Géotechnique. 1993;43:577–87.10.1680/geot.1993.43.4.577 ↗
6. Fenton GA, Griffiths DV. Bearing capacity prediction of spatially random c-ϕ soil. Can Geotech J. 2003;40:54–65.10.1139/t02-086 ↗
7. Griffiths DV, Fenton GA. Probabilistic slope stability analysis by finite elements. J Geotech Geoenviron Eng. 2004;130:507–18.10.1061/(ASCE)1090-0241(2004)130:5(507) ↗
8. Kawa M, Puła W. 3d bearing capacity probabilistic analyses of footings on spatially variable c–ϕ soil. Acta Geotech. 2020;15:1453–66.10.1007/s11440-019-00853-3 ↗
9. Savvides A, Papadrakakis M. A computational study on the uncertainty quantification of failure of clays with a modified cam-clay yield criterion. SN Appl Sci. 2021;3:659.10.1007/s42452-021-04631-3 ↗
10. Ziegler MO. Rock properties and modelled stress state uncertainties: a study of variability and dependence. Rock Mech Rock Eng. 2022;55(8):4549–64.10.1007/s00603-022-02879-8 ↗
11. Schweiger HF. Benchmarking in geotechnics. Part i: Results of benchmarking. Part ii: Reference solution and parametric study. Technical Report CGG_IR006_2002, Institute for Soil Mechanics and Foundation Engineering, Graz University of Technology, Austria; 2002.
12. Cudny M, Truty A. Refinement of the Hardening Soil model within the small strain range. Acta Geotechnica. 2020;150(8):2031–51.10.1007/s11440-020-00945-5 ↗
13. Huber M, Marconi F, Moscatelli M. Risk-based characterisation of an urban building site. Georisk Assess Manag Risk Eng Syst Geohazards. 2015;90(1):49–56.10.1080/17499518.2015.1015574 ↗
14. Sainea-Vargas CJ, Torres-Suárez MC. Damage probability assessment for adjoining buildings to deep excavations in soft soils. Int J Geotech Eng. 2020;140(7):793–808.10.1080/19386362.2019.1680486 ↗
15. Zhixin Z, Xueyou L, Hongfen Z. Probabilistic study of offshore monopile foundations considering soil spatial variability. ASCE-ASME J Risk Uncertain Eng Syst Part A Civ Eng. 2022;80(3):04022035.
16. Xie P, Luo H, Chen K, Yang Z. Random field-based tunneling information modeling framework for probabilistic safety assessment of shield tunnels. J Civ Eng Manag. 2023;290(8):741–56.10.3846/jcem.2023.20428 ↗
17. Xie P, Chen K, Skibniewski MJ, Wang J, Luo H. Parametric geological model update and probabilistic analysis of shield tunnel excavation: a borehole-based conditional random fields approach. Comput Geotech. 2023;157:105349.10.1016/j.compgeo.2023.105349 ↗
18. Teshager DK, Chwała M, Puła W. Probabilistic analysis of shallow foundation settlement on layered soil using a hardening soil model. In: Geo-Risk 2023; p. 317–325.10.1061/9780784484999.033 ↗
19. Sert S, Luo Z, Xiao J, Gong W, Juang CH. Probabilistic analysis of responses of cantilever wall-supported excavations in sands considering vertical spatial variability. Comput Geotech. 2016;75:182–91.10.1016/j.compgeo.2016.02.004 ↗
20. Luo Z, Li Y, Zhou S, Di H. Effects of vertical spatial variability on supported excavations in sands considering multiple geotechnical and structural failure modes. Comput Geotech. 2018;95:16–29.10.1016/j.compgeo.2017.11.017 ↗
21. Kawa M, Puła W, Truty A. Probabilistic analysis of the diaphragm wall using the hardening soil-small (hss) model. Eng Struct. 2021;232: 111869.10.1016/j.engstruct.2021.111869 ↗
22. Yi S, Chen J, Huang J, Li J, Qiu Y, You W. Investigation of surface settlement and wall deflection caused by braced excavation in spatially variable clays based on anisotropic random fields. Arab J Sci Eng. 2022;470(4):4059–77.10.1007/s13369-021-05853-8 ↗
23. Sainea-Vargas CJ, Torres-Suárez MC. Assessing and updating damage probabilities for a deep excavation in Mexico City soft soils. Indian Geotech J. 2020;50:671–88.10.1007/s40098-019-00405-2 ↗
24. Truty A. Estimating Hardening Soil-brick model parameters for sands based on CPTU tests and laboratory experimental evidence. Sci Rep. 2024;140(1):15102.10.1038/s41598-024-65789-5 ↗
25. Kawa M, Puła W, Truty A. Probabilistic analysis of an anchored diaphragm wall installed in normally consolidated sands. In: Huang J, Griffiths DV, Jiang S-H, Giacomini A, Kelly R, editors. Proceedings of the 8th international symposium on geotechnical safety and risk (ISGSR). New Castle: ISGSR Organizers; 2022. p. 285–90.10.3850/978-981-18-5182-7_00-04-003.xml ↗
26. Robertson PK, Cabal KL. Guide to cone penetration testing for geotechnical engineering. Signal Hill, CA: Gregg Drilling & Testing; 2015.
27. Bagińska I, Kawa M, Janecki W. Estimation of spatial variability properties of mine waste dump using CPTu results—case study. In: Cone penetration testing 2018, 2018; p. 109–115. CRC Press.
28. Cami B, Javankhoshdel S, Phoon KK, Ching J. Scale of fluctuation for spatially varying soils: estimation methods and values. IJNMG, 11; 2020.10.1061/AJRUA6.0001083 ↗
29. Jha S, Ching J. Simulating spatial averages of stationary random field using the Fourier series method. J Eng Mech. 2012;139:594–605.
30. Poński M, Pokorska I. Numerical simulation of random fields using correlated random vector and the Karhunen–Loève expansion. Comput Assist Methods Eng Sci. 2019;25(1):47–58.
31. Puła W, Griffiths DV. Transformations of spatial correlation lengths in random fields. Comput Geotech. 2021;136:104151.10.1016/j.compgeo.2021.104151 ↗
32. Nataf A. Détermination des distributions de probabilités dont les marges sont données. Comptes Rendus de l’Académie des Sciences. 1962;255:42–3.
33. Ove D, Madsen Henrik O. Structural reliability methods, vol. 178. New York: Wiley; 1996.
34. Ching J, Phoon KK. Effect of element sizes in random field finite element simulations of soil shear strength. Comput Struct. 2013;126:120–34.10.1016/j.compstruc.2012.11.008 ↗
35. Puso M. A 3D mortar method for solid mechanics. Int J Numer Methods Eng. 2023;59(315–336):2003.
36. GeoDev. ZSOILPC User manual ZSoil v2023. Soil, rock and structural mechanics in dry or partially saturated media. Lausanne: Geodev; 2023.
37. Wichtmann T, Kimming I, Traintafyllidis T. On correlations between “dynamic” (small-strain) and “static” (large-strain) stiffness moduli—an experimental investigation on 19 sands and gravels. Soil Dyn Earthq Eng. 2017;98:72–83.10.1016/j.soildyn.2017.03.032 ↗
38. Ahmed SM. Enhancing the CPT correlation with the small strain shear stiffness of sands. Ain Shams Eng J. 2017;8:539–48.10.1016/j.asej.2016.08.010 ↗
39. Robertson PK, Wride CE. Evaluating cyclic liquefaction potential using the cone penetration test. Can Geotech J. 1998;35:442–59.10.1139/t98-017 ↗
40. Agaiby SS, Mayne PW. Indirect estimation of fines content using the modified CPT material index. In: Proceedings of the GeoCongress 2020: Modeling, Geomaterials, and Site Characterization, volume VA, 2020; p. 569–82, Minneapolis, GSP 317.10.1061/9780784482803.061 ↗
41. Szabowicz H, Kawa M, Puła W. Efficient and conservative estimation reliability analysis of strip footing on spatially variable c-ϕ soil using random finite element limit analysis. Studia Geotechnica et Mechanica. 2025;1:19.
42. Au S-K, Beck JL. Estimation of small failure probabilities in high dimensions by subset simulation. Probab Eng Mech. 2001;160(4):263–77.10.1016/S0266-8920(01)00019-4 ↗