journal article·2025-05-16Open access

Bending performance of concrete with coarse recycled aggregate and raw-crushed wind-turbine blade at an early age

Vanesa Ortega-López, Flora Faleschini, Juan M. Manso, Víctor Revilla-Cuesta

Abstract

Abstract The bonded mortar in the Coarse Recycled Aggregate (CRA) reduces both the adhesion in the interfacial transition zones and the stiffness of concrete, which worsens concrete bending behavior. These aspects are more remarkable at early ages due to the lower strength and stiffness developed by the concrete matrix. The stitching effect of the 66.8% by weight of Glass Fiber-Reinforced Polymer (GFRP) fibers contained in Raw-Crushed Wind-Turbine Blade (RCWTB) can counteract these phenomena. This research analyzes the bending behavior of concrete made with up to 100% CRA in combination with 6% RCWTB as aggregate replacement. Early ages (1, 3, and 7 days) and both moist and ambient curing are considered to cover all possible put-into-service situations of concrete elements. Compared to concrete with the same composition but without RCWTB, this waste increased the pre-failure compliance by up to 26.9%, the failure deflection by up to 12.8%, and the failure stress by up to 37.5% when combined with as much as 50% CRA. An earlier concrete age and ambient curing made such effects more notable due to the weaker cementitious matrix. Furthermore, RCWTB provided post-failure load-bearing capacity to concrete, the incorporation of 6% RCWTB to concrete with 50% CRA increasing the absorbed energy under bending loading by 135%. RCWTB also allowed the energy absorbed by concrete to be almost unaffected when adding any CRA amount. All these effects were statistically significant and demonstrate that RCWTB improves the bending deformability of concrete produced with CRA, mainly because of the deflection improvement it caused.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Alzoubi H, Elsanadedy H, Abbas H, Almusallam T, Abadel A, Al-Salloum Y. Investigating the performance of basalt FRP-reinforced concrete columns: experimental and analytical insights. Arch Civ Mech Eng. 2024;24(4):216. https://doi.org/10.1007/s43452-024-01023-3.10.1007/s43452-024-01023-3 ↗
2. Toska K, Hofer L, Faleschini F, Zanini MA, Pellegrino C. Seismic behavior of damaged RC columns repaired with FRCM composites. Eng Struct. 2022;262: 114339. https://doi.org/10.1016/j.engstruct.2022.114339.10.1016/j.engstruct.2022.114339 ↗
3. Velay-Lizancos M, Vazquez-Burgo P, Restrepo D, Martinez-Lage I. Effect of fine and coarse recycled concrete aggregate on the mechanical behavior of precast reinforced beams: comparison of FE simulations, theoretical, and experimental results on real scale beams. Constr Build Mater. 2018;191:1109–19. https://doi.org/10.1016/j.conbuildmat.2018.10.075.10.1016/j.conbuildmat.2018.10.075 ↗
4. Fang M, Chen Y, Deng Y, Wang Z, Zhu M. Toughness improvement mechanism and evaluation of cement concrete for road pavement: a review. J Road Eng. 2023;3(2):125–40. https://doi.org/10.1016/j.jreng.2023.01.005.10.1016/j.jreng.2023.01.005 ↗
5. EC-2. Eurocode 2: Design of concrete structures. Part 1–1: general rules and rules for buildings. CEN (European Committee for Standardization). 2010.
6. Rincon LF, Moscoso YM, Hamami AEA, Matos JC, Bastidas-Arteaga E. Degradation models and maintenance strategies for reinforced concrete structures in coastal environments under climate change: a review. Buildings. 2024;14(3):562. https://doi.org/10.3390/buildings14030562.10.3390/buildings14030562 ↗
7. Malumbela G, Alexander M, Moyo P. Steel corrosion on RC structures under sustained service loads - a critical review. Eng Struct. 2009;31(11):2518–25. https://doi.org/10.1016/j.engstruct.2009.07.016.10.1016/j.engstruct.2009.07.016 ↗
8. Santamaría A, Romera JM, Marcos I, Revilla-Cuesta V, Ortega-López V. Shear strength assessment of reinforced concrete components containing EAF steel slag aggregates. J Build Eng. 2022;46: 103730. https://doi.org/10.1016/j.jobe.2021.103730.10.1016/j.jobe.2021.103730 ↗
9. Liu B, Ye H, Jiang J, Shi J, Yalçınkaya Ç, Šavija B. Assessment of self-healing behavior of polypropylene fiber-reinforced cement mortar with crystalline admixture: the effects of crack widths, cracking ages, and external conditions. J Sustain Cem Based Mater. 2024;13(5):706–25. https://doi.org/10.1080/21650373.2023.2300996.10.1080/21650373.2023.2300996 ↗
10. Sabbrojjaman M, Liu Y, Tafsirojjaman T. A comparative review on the utilisation of recycled waste glass, ceramic and rubber as fine aggregate on high performance concrete: mechanical and durability properties. Dev Built Environ. 2024;17: 100371. https://doi.org/10.1016/j.dibe.2024.100371.10.1016/j.dibe.2024.100371 ↗
11. Bulatbekova D, Vashistha P, Kim HK, Pyo S. Effects of basic-oxygen furnace, electric-arc furnace, and ladle furnace slags on the hydration and durability properties of construction materials: a review. J Build Eng. 2024;92: 109670. https://doi.org/10.1016/j.jobe.2024.109670.10.1016/j.jobe.2024.109670 ↗
12. Tudu C, Mohanty M, Mohapatra SS, Nayak S. A systematic review exploring the feasibility of waste plastic as different constituents towards sustainable concrete. Constr Build Mater. 2024;428: 136210. https://doi.org/10.1016/j.conbuildmat.2024.136210.10.1016/j.conbuildmat.2024.136210 ↗
13. Hasheminezhad A, King D, Ceylan H, Kim S. Comparative life cycle assessment of natural and recycled aggregate concrete: a review. Sci Total Environ. 2024;950: 175310. https://doi.org/10.1016/j.scitotenv.2024.175310.10.1016/j.scitotenv.2024.175310 ↗
14. Velay-Lizancos M, Martinez-Lage I, Azenha M, Granja J, Vazquez-Burgo P. Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and non-destructive testing at early ages. Constr Build Mater. 2018;193:323–31. https://doi.org/10.1016/j.conbuildmat.2018.10.209.10.1016/j.conbuildmat.2018.10.209 ↗
15. Evangelista L, de Brito J. Mechanical behaviour of concrete made with fine recycled concrete aggregates. Cem Concr Compos. 2007;29(5):397–401. https://doi.org/10.1016/j.cemconcomp.2006.12.004.10.1016/j.cemconcomp.2006.12.004 ↗
16. Xu JJ, Zhao XY, Chen ZP, Liu JC, Xue JY, Elchalakani M. Novel prediction models for composite elastic modulus of circular recycled aggregate concrete-filled steel tubes. Thin-Walled Struct. 2019;144: 106317. https://doi.org/10.1016/j.tws.2019.106317.10.1016/j.tws.2019.106317 ↗
17. Gao S, Guo J, Zhu Y, Jin Z. Study on the influence of the properties of interfacial transition zones on the performance of recycled aggregate concrete. Constr Build Mater. 2023;408: 133592. https://doi.org/10.1016/j.conbuildmat.2023.133592.10.1016/j.conbuildmat.2023.133592 ↗
18. Revilla-Cuesta V, Skaf M, Santamaría A, Ortega-López V, Manso JM. Assessment of longitudinal and transversal plastic behavior of recycled aggregate self-compacting concrete: a two-way study. Constr Build Mater. 2021;292: 123426. https://doi.org/10.1016/j.conbuildmat.2021.123426.10.1016/j.conbuildmat.2021.123426 ↗
19. Silva RV, de Brito J, Dhir RK. Fresh-state performance of recycled aggregate concrete: a review. Constr Build Mater. 2018;178:19–31. https://doi.org/10.1016/j.conbuildmat.2018.05.149.10.1016/j.conbuildmat.2018.05.149 ↗
20. Revilla-Cuesta V, Faleschini F, Zanini MA, Skaf M, Ortega-López V. Porosity-based models for estimating the mechanical properties of self-compacting concrete with coarse and fine recycled concrete aggregate. J Build Eng. 2021;44: 103425. https://doi.org/10.1016/j.jobe.2021.103425.10.1016/j.jobe.2021.103425 ↗
21. Muhammad F, Harun M, Ahmed A, Kabir N, Khalid HR, Hanif A. Influence of bonded mortar on recycled aggregate concrete properties: a review. Constr Build Mater. 2024;432: 136564. https://doi.org/10.1016/j.conbuildmat.2024.136564.10.1016/j.conbuildmat.2024.136564 ↗
22. El-Abbasy AA. Tensile, flexural, impact strength, and fracture properties of ultra-high-performance fiber-reinforced concrete – a comprehensive review. Constr Build Mater. 2023;408: 133621. https://doi.org/10.1016/j.conbuildmat.2023.133621.10.1016/j.conbuildmat.2023.133621 ↗
23. Li Y, Chen P, Chen Z, Liu X, Liu Z, Liu Y. Influence of fiber on the shrinkage performance of alkali-activated slag recycled concrete. Arch Civ Mech Eng. 2024;24(3):153. https://doi.org/10.1007/s43452-024-00966-x.10.1007/s43452-024-00966-x ↗
24. Lai D, Demartino C, Xiao Y. High-strain rate tension behavior of fiber-reinforced rubberized concrete. Cem Concr Compos. 2022;131: 104554. https://doi.org/10.1016/j.cemconcomp.2022.104554.10.1016/j.cemconcomp.2022.104554 ↗
25. Aghajanian A, Cimentada A, Behfarnia K, Brand AS, Thomas C. Microstructural analysis of siderurgical aggregate concrete reinforced with fibers. J Build Eng. 2023;64: 105543. https://doi.org/10.1016/j.jobe.2022.105543.10.1016/j.jobe.2022.105543 ↗
26. Chen L, Chen Z, Xie Z, Wei L, Hua J, Huang L, et al. Recent developments on natural fiber concrete: a review of properties, sustainability, applications, barriers, and opportunities. Dev Built Environ. 2023;16: 100255. https://doi.org/10.1016/j.dibe.2023.100255.10.1016/j.dibe.2023.100255 ↗
27. Manso-Morato J, Hurtado-Alonso N, Revilla-Cuesta V, Skaf M, Ortega-López V. Fiber-reinforced concrete and its life cycle assessment: a systematic review. J Build Eng. 2024;94: 110062. https://doi.org/10.1016/j.jobe.2024.110062.10.1016/j.jobe.2024.110062 ↗
28. Zhang X, Zhu Y, Shen Y, Wang J, Fan Y, Gao X, et al. Compressive mechanical performance and microscopic mechanism of basalt fiber-reinforced recycled aggregate concrete after elevated temperature exposure. J Build Eng. 2024;96: 110647. https://doi.org/10.1016/j.jobe.2024.110647.10.1016/j.jobe.2024.110647 ↗
29. Zhang F, Lu Z, Wang D. Working and mechanical properties of waste glass fiber reinforced self-compacting recycled concrete. Constr Build Mater. 2024;439: 137172. https://doi.org/10.1016/j.conbuildmat.2024.137172.10.1016/j.conbuildmat.2024.137172 ↗
30. Valizadeh Kiamahalleh M, Gholampour A, Ngo TD, Ozbakkaloglu T. Mechanical, durability and microstructural properties of waste-based concrete reinforced with sugarcane fiber. Structures. 2024;67: 107019. https://doi.org/10.1016/j.istruc.2024.107019.10.1016/j.istruc.2024.107019 ↗
31. Sachin EK, Muthu N, Tiwari P. Hybrid recycling methods for fiber reinforced polymer composites: a review. J Reinf Plast Compos. 2024. https://doi.org/10.1177/07316844241258557.10.1177/07316844241258557 ↗
32. Podara C, Termine S, Modestou M, Semitekolos D, Tsirogiannis C, Karamitrou M, et al. Recent trends of recycling and upcycling of polymers and composites: a comprehensive review. Recycling. 2024;9(3):37. https://doi.org/10.3390/recycling9030037.10.3390/recycling9030037 ↗
33. Shen Y, Apraku SE, Zhu Y. Recycling and recovery of fiber-reinforced polymer composites for end-of-life wind turbine blade management. Green Chem. 2023;25(23):9644–58. https://doi.org/10.1039/d3gc03479h.10.1039/d3gc03479h ↗
34. Wei Y, Hadigheh SA. Enhancing carbon fibre recovery through optimised thermal recycling: kinetic analysis and operational parameter investigation. Mater Today Sustain. 2024;25: 100661. https://doi.org/10.1016/j.mtsust.2023.100661.10.1016/j.mtsust.2023.100661 ↗
35. Fonte R, Xydis G. Wind turbine blade recycling: an evaluation of the European market potential for recycled composite materials. J Environ Manage. 2021;287: 112269. https://doi.org/10.1016/j.jenvman.2021.112269.10.1016/j.jenvman.2021.112269 ↗
36. Tao Y, Hadigheh SA, Wei Y. Recycling of glass fibre reinforced polymer (GFRP) composite wastes in concrete: a critical review and cost benefit analysis. Structures. 2023;53:1540–56. https://doi.org/10.1016/j.istruc.2023.05.018.10.1016/j.istruc.2023.05.018 ↗
37. Xu GT, Liu MJ, Xiang Y, Fu B. Valorization of macro fibers recycled from decommissioned turbine blades as discrete reinforcement in concrete. J Clean Prod. 2022;379: 134550. https://doi.org/10.1016/j.jclepro.2022.134550.10.1016/j.jclepro.2022.134550 ↗
38. Fu B, Xu GT, Peng WS, Huang JZ, Zou QQ, Kuang YD. Performance enhancement of recycled coarse aggregate concrete by incorporating with macro fibers processed from waste GFRP. Constr Build Mater. 2024;411: 134166. https://doi.org/10.1016/j.conbuildmat.2023.134166.10.1016/j.conbuildmat.2023.134166 ↗
39. Xu MX, Ji HW, Wu YC, Meng XX, Di JY, Yang J, et al. Recovering glass fibers from waste wind turbine blades: recycling methods, fiber properties, and potential utilization. Renew Sustain Energy Rev. 2024;202: 114690. https://doi.org/10.1016/j.rser.2024.114690.10.1016/j.rser.2024.114690 ↗
40. Joustra J, Flipsen B, Balkenende R. Structural reuse of wind turbine blades through segmentation. Compos Part C Open Access. 2021;5: 100137. https://doi.org/10.1016/j.jcomc.2021.100137.10.1016/j.jcomc.2021.100137 ↗
41. Rani M, Choudhary P, Krishnan V, Zafar S. A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades. Compos Part B Eng. 2021;215: 108768. https://doi.org/10.1016/j.compositesb.2021.108768.10.1016/j.compositesb.2021.108768 ↗
42. Baturkin D, Hisseine OA, Masmoudi R, Tagnit-Hamou A, Massicotte L. Valorization of recycled FRP materials from wind turbine blades in concrete. Resour Conserv Recycl. 2021;174: 105807. https://doi.org/10.1016/j.resconrec.2021.105807.10.1016/j.resconrec.2021.105807 ↗
43. Revilla-Cuesta V, Skaf M, Ortega-López V, Manso JM. Raw-crushed wind-turbine blade: Waste characterization and suitability for use in concrete production. Resour Conserv Recycl. 2023;198: 107160. https://doi.org/10.1016/j.resconrec.2023.107160.10.1016/j.resconrec.2023.107160 ↗
44. Ortega-López V, Faleschini F, Hurtado-Alonso N, Manso-Morato J, Revilla-Cuesta V. Analysis of raw-crushed wind-turbine blade as an overall concrete addition: stress–strain and deflection performance effects. Compos Struct. 2024;340: 118170. https://doi.org/10.1016/j.compstruct.2024.118170.10.1016/j.compstruct.2024.118170 ↗
45. EN-Euronorm. Rue de stassart, 36. Belgium-1050 Brussels, European Committee for Standardization.
46. Luo H, Aguiar J, Wan X, Wang Y, Cunha S, Jia Z. Application of aggregates from construction and demolition wastes in concrete: review. Sustainability. 2024;16(10):4277. https://doi.org/10.3390/su16104277.10.3390/su16104277 ↗
47. ASTM. Annual book of ASTM standards. 2023.
48. Sidhu AS, Siddique R. Review on effect of curing methods on high strength concrete. Constr Build Mater. 2024;438: 136858. https://doi.org/10.1016/j.conbuildmat.2024.136858.10.1016/j.conbuildmat.2024.136858 ↗
49. Vivekanandan N. Assessment of uncertainty in estimation of rainfall using EV1 distribution with reference to data length. Mausam. 2024;75(3):801–14. https://doi.org/10.54302/mausam.v75i3.6236.10.54302/mausam.v75i3.6236 ↗
50. Cantero B, Bravo M, de Brito J, Sáez del Bosque IF, Medina C. Mechanical behaviour of structural concrete with ground recycled concrete cement and mixed recycled aggregate. J Clean Prod. 2020;275:122913. https://doi.org/10.1016/j.jclepro.2020.122913.10.1016/j.jclepro.2020.122913 ↗
51. Revilla-Cuesta V, Serrano-López R, Espinosa AB, Ortega-López V, Skaf M. Analyzing the relationship between compressive strength and modulus of elasticity in concrete with ladle furnace slag. Buildings. 2023;13(12):3100. https://doi.org/10.3390/buildings13123100.10.3390/buildings13123100 ↗
52. Silva RV, De Brito J, Dhir RK. Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete. J Clean Prod. 2016;112:2171–86. https://doi.org/10.1016/j.jclepro.2015.10.064.10.1016/j.jclepro.2015.10.064 ↗
53. Islam MJ, Shahjalal M, Haque NMA. Mechanical and durability properties of concrete with recycled polypropylene waste plastic as a partial replacement of coarse aggregate. J Build Eng. 2022;54: 104597. https://doi.org/10.1016/j.jobe.2022.104597.10.1016/j.jobe.2022.104597 ↗
54. Trento D, Faleschini F, Revilla-Cuesta V, Ortega-López V. Improving the early-age behavior of concrete containing coarse recycled aggregate with raw-crushed wind-turbine blade. J Build Eng. 2024;92: 109815. https://doi.org/10.1016/j.jobe.2024.109815.10.1016/j.jobe.2024.109815 ↗
55. Vintimilla C, Etxeberria M, Li Z. Durable structural concrete produced with coarse and fine recycled aggregates using different cement types. Sustainability. 2023;15(19):14272. https://doi.org/10.3390/su151914272.10.3390/su151914272 ↗
56. García-González J, Rodríguez-Robles D, Wang J, De Belie N, Morán-del Pozo JM, Guerra-Romero MI, et al. Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate. Constr Build Mater. 2017;154:1015–23. https://doi.org/10.1016/j.conbuildmat.2017.08.039.10.1016/j.conbuildmat.2017.08.039 ↗
57. Revilla-Cuesta V, Ortega-López V, Skaf M, Khan AUR, Manso JM. Deformational behavior of self-compacting concrete containing recycled aggregate, slag cement and green powders under compression and bending: Description and prediction adjustment. J Build Eng. 2022;54: 104611. https://doi.org/10.1016/j.jobe.2022.104611.10.1016/j.jobe.2022.104611 ↗
58. Jang ES, Kang CW. Porosity analysis of three types of balsa (Ochroma pyramidale) wood depending on density. J Wood Sci. 2022;68(1):31. https://doi.org/10.1186/s10086-022-02037-2.10.1186/s10086-022-02037-2 ↗
59. Fu B, Lin LB, Zhou X, You XM, Deng DY. Effect of incorporating recycled macro fibres on the properties of ultra-high-performance seawater sea-sand concrete. J Build Eng. 2024;83: 108460. https://doi.org/10.1016/j.jobe.2024.108460.10.1016/j.jobe.2024.108460 ↗
60. Guedes M, Evangelista L, De Brito J, Ferro AC. Microstructural characterization of concrete prepared with recycled aggregates. Microsc Microanal. 2013;19(5):1222–30. https://doi.org/10.1017/S1431927613001463.10.1017/S1431927613001463 ↗
61. Aghaee K, Khayat KH. Effect of shrinkage-mitigating materials on performance of fiber-reinforced concrete – an overview. Constr Build Mater. 2021;305: 124586. https://doi.org/10.1016/j.conbuildmat.2021.124586.10.1016/j.conbuildmat.2021.124586 ↗
62. Mao Y, Liu J, Shi C. Autogenous shrinkage and drying shrinkage of recycled aggregate concrete: a review. J Clean Prod. 2021;295: 126435. https://doi.org/10.1016/j.jclepro.2021.126435.10.1016/j.jclepro.2021.126435 ↗