Effect of power on the microstructure and mechanical properties of 1500 MPa martensitic steel joints in laser-assisted friction stir welding
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Zyguła K, Cichocki K, Kowalczyk K, et al. Microstructure prediction of 80MnSi8-6 steel after hot deformation based on dynamic recrystallization kinetics and FEM simulation. JOM. 2024;76(49):5193–209. https://doi.org/10.1007/s11837-024-06648-6.10.1007/s11837-024-06648-6 ↗
2. Liu FC, Feng AH, Pei X, et al. Friction stir based welding, processing, extrusion and additive manufacturing. Progress Mater Sci. 2024. https://doi.org/10.1016/j.pmatsci.2024.101330.10.1016/j.pmatsci.2024.101330 ↗
3. Liu XC, Sun YF, Nagira T, et al. Investigation of temperature dependent microstructure evolution of pure iron during friction stir welding using liquid CO2 rapid cooling. Mater Charact. 2018;137:24–38. https://doi.org/10.1016/j.matchar.2018.01.004.10.1016/j.matchar.2018.01.004 ↗
4. Wang YQ, Duan RH, Hu J, et al. Improvement in toughness and ductility of friction stir welded medium-Mn steel joint via post-welding annealing. J Mater Process Technol. 2022;306: 117621. https://doi.org/10.1016/j.jmatprotec.2022.117621.10.1016/j.jmatprotec.2022.117621 ↗
5. Duan RH, Xie GM, Xue P, et al. Microstructural refinement mechanism and its effect on toughness in the nugget zone of high-strength pipeline steel by friction stir welding. J Mater Sci Technol. 2021;93:221–31. https://doi.org/10.1016/j.jmst.2021.04.008.10.1016/j.jmst.2021.04.008 ↗
6. Xue P, Komizo Y, Ueji R, et al. Enhanced mechanical properties in friction stir welded low alloy steel joints via structure refining. Mater Sci Eng A. 2014;606:322–9. https://doi.org/10.1016/j.msea.2014.03.058.10.1016/j.msea.2014.03.058 ↗
7. Patel V, Li W, Vairis A, et al. Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement. Critical Rev Solid State Mater Sci. 2019;44(5):378–426. https://doi.org/10.1080/10408436.2018.1490251.10.1080/10408436.2018.1490251 ↗
8. Vorontsov A, Zykova A, Chumaevskii A, et al. Outstanding features of high-speed hybrid laser-arc welding compared to high-speed laser welding of AA5059 aluminum alloys. Vacuum. 2022;196: 110736. https://doi.org/10.1016/j.vacuum.2021.110736.10.1016/j.vacuum.2021.110736 ↗
9. Wang ZW, Zhang JF, Xie GM, et al. Evolution mechanisms of microstructure and mechanical properties in a friction stir welded ultrahigh-strength quenching and partitioning steel. J Mater Sci Technol. 2022;102:213–23. https://doi.org/10.1016/j.jmst.2021.06.031.10.1016/j.jmst.2021.06.031 ↗
10. Jeong MS, Park TM, Kim DI, et al. Improving toughness of medium-Mn steels after friction stir welding through grain morphology tuning. J Mater Sci Technol. 2022;118:243–54. https://doi.org/10.1016/j.jmst.2021.12.023.10.1016/j.jmst.2021.12.023 ↗
11. Kumar L, Yazar KU, Pramanik S. Effect of fusion and friction stir welding techniques on the microstructure, crystallographic texture and mechanical properties of mild steel. Mater Sci Eng A. 2019;754:400–10. https://doi.org/10.1016/j.msea.2019.03.100.10.1016/j.msea.2019.03.100 ↗
12. Padhy GK, Wu CS, Gao S. Auxiliary energy assisted friction stir welding—status review. Sci Technol Weld Joining. 2015;20(8):631–49. https://doi.org/10.1179/1362171815Y.0000000048.10.1179/1362171815Y.0000000048 ↗
13. Mohan Dhanesh G, Gopi S, Jacek Tomkow, et al. Assessment of corrosive behaviour and microstructure characterization of hybrid friction stir welded martensitic stainless steel. Adv Mater Sci. 2021;21(4):67–78. https://doi.org/10.2478/adms-2021-0025.10.2478/adms-2021-0025 ↗
14. Sun YF, Konishi Y, Kamai M, et al. Microstructure and mechanical properties of S45C steel prepared by laser-assisted friction stir welding. Mater Des. 2013;47:842–9. https://doi.org/10.1016/j.matdes.2012.12.078.10.1016/j.matdes.2012.12.078 ↗
15. Zhu S, Wang N, Li S, et al. Study on the materials flow, microstructure and mechanical properties of ultrasonic vibration-assisted friction stir weld of 1500 MPa martensitic steel. Mater Charact. 2023;206: 113409. https://doi.org/10.1016/j.matchar.2023.113409.10.1016/j.matchar.2023.113409 ↗
16. Guo L, Wang H, Wei Q, et al. A comprehensive model to quantify the effects of additional nano-particles on the printability in laser powder bed fusion of aluminum alloy and composite. Addit Manuf. 2022;58: 103011. https://doi.org/10.1016/j.addma.2022.103011.10.1016/j.addma.2022.103011 ↗
17. Guo L, Wang H, Liu H, et al. Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy. Int J Mach Tools Manuf. 2023;184: 103977. https://doi.org/10.1016/j.ijmachtools.2022.103977.10.1016/j.ijmachtools.2022.103977 ↗
18. Mengran Z, Yufeng S, Yoshiaki M, et al. Quasi-in-situ investigation into the microstructure and texture evolution of pure magnesium during friction stir welding. J Magnes Alloys. 2020;8(4):1071–83. https://doi.org/10.1016/j.jma.2020.05.015.10.1016/j.jma.2020.05.015 ↗
19. Hu Y, Liu H, Fujii H. Improving the mechanical properties of 2219–T6 aluminum alloy joints by ultrasonic vibrations during friction stir welding. J Mater Process Technol. 2019;271:75–84. https://doi.org/10.1016/j.jmatprotec.2019.03.013.10.1016/j.jmatprotec.2019.03.013 ↗
20. Hua P, Moronov S, Nie CZ, et al. Microstructure and properties in friction stir weld of 12Cr steel. Sci Technol Weld Joining. 2014;19(1):76–81. https://doi.org/10.1179/1362171813Y.0000000167.10.1179/1362171813Y.0000000167 ↗
21. Falekari A, Jafarian HR, Eivani AR, et al. Friction stir processing of thick tempered martensitic steels: correlation between microstructure and mechanical properties. Mater Sci Eng, A. 2022;836: 142698. https://doi.org/10.1016/j.msea.2022.142698.10.1016/j.msea.2022.142698 ↗
22. Wu Z, Ushioda K, Fujii H. Mechanism of suppressing HAZ softening in friction stir welded martensitic steel through hardening phenomenon initiated by adding vanadium. J Market Res. 2023;26:1151–67. https://doi.org/10.1016/j.jmrt.2023.07.115.10.1016/j.jmrt.2023.07.115 ↗
23. Huang G, Wu J, Yuan R, et al. Elucidating microstructural evolution and its effect on the mechanical properties of FSWed alumina-forming austenitic steel for power plant applications. Mater Des. 2022;215: 110484. https://doi.org/10.1016/j.matdes.2022.110484.10.1016/j.matdes.2022.110484 ↗
24. Sabooni S, Karimzadeh F, Enayati MH, et al. Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing. Mater Des. 2015;76:130–40. https://doi.org/10.1016/j.matdes.2015.03.052.10.1016/j.matdes.2015.03.052 ↗
25. Duan RH, Xie GM, Luo ZA, et al. Microstructure, crystallography, and toughness in nugget zone of friction stir welded high-strength pipeline steel. Mater Sci Eng, A. 2020;791: 139620. https://doi.org/10.1016/j.msea.2020.139620.10.1016/j.msea.2020.139620 ↗
26. Mahmoudiniya M, Kokabi AH, Kheirandish S, et al. Microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel. Mater Sci Eng A. 2018;737:213–22. https://doi.org/10.1016/j.msea.2018.09.013.10.1016/j.msea.2018.09.013 ↗
27. Wang Y, Tsutsumi S, Kawakubo T, et al. Microstructure and mechanical properties of weathering mild steel joined by friction stir welding. Mater Sci Eng A. 2021;823: 141715. https://doi.org/10.1016/j.msea.2021.141715.10.1016/j.msea.2021.141715 ↗
28. Wu Z, Ushioda K, Fujii H. Suppression of softening in heat affected zone by Mo addition in friction stir welded martensitic steel. Sci Technol Weld Joining. 2022;27(3):204–12. https://doi.org/10.1080/13621718.2022.2036567.10.1080/13621718.2022.2036567 ↗
29. Xie GM, Duan RH, Wang YQ, et al. Crystallography of the nugget zone of bainitic steel by friction stir welding in various cooling mediums. Mater Charact. 2021;182: 111523. https://doi.org/10.1016/j.matchar.2021.111523.10.1016/j.matchar.2021.111523 ↗
30. Ragab M, Liu H, Ahmed MMZ, et al. Microstructure evolution during friction stir welding of 1Cr11Ni2W2MoV martensitic stainless steel at different tool rotation rates. Mater Charact. 2021;182: 111561. https://doi.org/10.1016/j.matchar.2021.111561.10.1016/j.matchar.2021.111561 ↗
31. Long S, Liang Y, Jiang Y, et al. Effect of quenching temperature on martensite multi-level microstructures and properties of strength and toughness in 20CrNi2Mo steel. Mater Sci Eng A. 2016;676:38–47. https://doi.org/10.1016/j.msea.2016.08.065.10.1016/j.msea.2016.08.065 ↗
32. Celada-Casero C, Sietsma J, Santofimia MJ. The role of the austenite grain size in the martensitic transformation in low carbon steels. Mater Des. 2019;167: 107625. https://doi.org/10.1016/j.matdes.2019.107625.10.1016/j.matdes.2019.107625 ↗
33. Mahmoudiniya M, Kestens LAI. Microstructural development and texture evolution in the stir zone and thermomechanically affected zone of a ferrite-martensite steel friction stir weld. Mater Charact. 2021;175: 111053. https://doi.org/10.1016/j.matchar.2021.111053.10.1016/j.matchar.2021.111053 ↗
34. Varghese J, Rajulapati KV, Rao KBS, et al. Ambient, elevated temperature tensile properties and origin of strengthening in friction stir welded 6 mm thick reduced activation ferritic-martensitic steel plates in as-welded and post-weld normalised conditions. Mater Sci Eng, A. 2022;857: 144019. https://doi.org/10.1016/j.msea.2022.144019.10.1016/j.msea.2022.144019 ↗
35. Cui HB, Lu Y, Xie GM, et al. The study on martensite morphology in the stir zone and its influence to impact toughness during friction stir welding medium–Mn ultrahigh strength steel. Mater Sci Eng A. 2020;798: 140102. https://doi.org/10.1016/j.msea.2020.140102.10.1016/j.msea.2020.140102 ↗
36. Duan RH, Wang YQ, Luo ZA, et al. Hydrogen embrittlement behavior in the nugget zone of friction stir welded X100 pipeline steel. Int J Hydrogen Energy. 2023;48(22):8296–309. https://doi.org/10.1016/j.ijhydene.2022.11.262.10.1016/j.ijhydene.2022.11.262 ↗
37. Sundar AS, Kar A, Mugada KK, Kumar A, et al. Enhancement of microstructure, micro-texture, and mechanical properties of Al6061 friction stir welds using the developed static shoulder welding tool. Mater Charact. 2023;203: 113148. https://doi.org/10.1016/j.matchar.2023.113148.10.1016/j.matchar.2023.113148 ↗
38. Zhu S, Zhu P, Wang B, et al. Improved mechanical properties of friction stir welded 1500 MPa martensitic steel joints with additional water cooling. Met Mater Int. 2024;30(1):220–9. https://doi.org/10.1007/s12540-023-01487-7.10.1007/s12540-023-01487-7 ↗