journal article·2025-07-03Open access

Multiaxial fatigue modeling of continuous fiber-reinforced polymers using a critical plane approach

Szymon Duda, Michał Smolnicki, Grzegorz Lesiuk, Ali Fatemi

Abstract

Abstract This paper presents extension of the application of a damage parameter recently shown to successfully model multiaxial fatigue behavior of short fiber-reinforced composites to continuous fiber composite materials. The authors conducted an experimental campaign on the fatigue life of carbon fiber-reinforced polymer composite (CFRP), taking into consideration several load ratios (R) as well as in-phase and out-of-phase loadings. The study focused on modeling fatigue damage initiation by incorporating the shear stress range and maximum normal stress. The analysis of stiffness degradation confirmed that most of the fatigue life was governed by damage onset and the propagation of small cracks. The observed damage was primarily associated with matrix-fiber debonding. This approach was verified with the literature's experimental data for glass fiber-reinforced polymer (GFRP) and the authors' experimental data for CFRP. Although those materials exhibit a similar fracture nature, they differ significantly in many aspects, i.e., fiber orientation, layup configuration, constituent materials and stiffness properties. The correlation of the stress-based damage parameter shows good agreement with both the authors’ and the literature experimental data, with coefficient of correlation (r) 0.84 and 0.89, respectively. The critical plane concept was also applied to estimate fatigue life, revealing that the long-life fatigue strength corresponds to approximately 25% of the ultimate tensile strength (UTS) for cylindrical specimens. Based on this relationship, the S–N curve for fatigue prediction can be constructed using only the UTS. Highlights Modeling of fatigue failure based on the critical plane approach using multiaxial experimental data for CFRP and GFRP Estimation of fatigue performance from static tension test
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Boeing. Boeing: 787 By design: by design: advanced composite use. Boeing 2021. http://www.boeing.com/commercial/787/by-design/#/advanced-composite-use. Accessed 19 May 2021.
2. Quaresimin M, Susmel L, Talreja R. Fatigue behaviour and life assessment of composite laminates under multiaxial loadings. Int J Fatigue. 2010;32:2–16. https://doi.org/10.1016/j.ijfatigue.2009.02.012.10.1016/j.ijfatigue.2009.02.012 ↗
3. Carraro PA, Quaresimin M. A damage based model for crack initiation in unidirectional composites under multiaxial cyclic loading. Compos Sci Technol. 2014;99:154–63. https://doi.org/10.1016/j.compscitech.2014.05.012.10.1016/j.compscitech.2014.05.012 ↗
4. Gamstedt EK, Sjögren BA. Micromechanisms in tension-compression fatigue of composite laminates containing transverse plies. Compos Sci Technol. 1999;59:167–78. https://doi.org/10.1016/S0266-3538(98)00061-X.10.1016/S0266-3538(98)00061-X ↗
5. Lee J, Soutis C. A study on the compressive strength of thick carbon fibre–epoxy laminates. Compos Sci Technol. 2007;67:2015–26. https://doi.org/10.1016/J.COMPSCITECH.2006.12.001.10.1016/J.COMPSCITECH.2006.12.001 ↗
6. Reifsnider K. Fatigue behavior of composite materials. Int J Fract. 1980;16:563–83.10.1007/BF02265218 ↗
7. Alderliesten RC. Critical review on the assessment of fatigue and fracture in composite materials and structures. Eng Fail Anal. 2013;35:370–9. https://doi.org/10.1016/J.ENGFAILANAL.2013.03.022.10.1016/J.ENGFAILANAL.2013.03.022 ↗
8. Talreja R, Varna J. Modeling damage, fatigue and failure of composite materials. Compos Sci Technol. 2015. https://doi.org/10.1016/c2022-0-00099-4.10.1016/c2022-0-00099-4 ↗
9. Qi D, Cheng G. Failure analysis of fiber-reinforced composites under multiaxial cyclic stress. Polym Compos. 2008;29:922–31. https://doi.org/10.1002/PC.20419.10.1002/PC.20419 ↗
10. Plumtree A, Cheng GX. Fatigue damage parameter for off-axis unidirectional fibre-reinforced composites. Int J Fatigue. 1999;21:849–56. https://doi.org/10.1016/S0142-1123(99)00026-2.10.1016/S0142-1123(99)00026-2 ↗
11. Lian Y, Wu F, Zhao Q, Han Y, Wang B. Multiaxial failure behavior and fatigue life prediction of unidirectional composite laminates. Compos Sci Technol. 2024;247: 110430. https://doi.org/10.1016/j.compscitech.2023.110430.10.1016/j.compscitech.2023.110430 ↗
12. Amjadi M, Fatemi A. A critical plane approach for multiaxial fatigue life prediction of short fiber reinforced thermoplastic composites. Compos Part A Appl Sci Manuf. 2024;180: 108050. https://doi.org/10.1016/j.compositesa.2024.108050.10.1016/j.compositesa.2024.108050 ↗
13. Amjadi M, Fatemi A. A fatigue damage model for life prediction of injection-molded short glass fiber-reinforced thermoplastic composites. Polymers (Basel). 2021. https://doi.org/10.3390/POLYM13142250.10.3390/POLYM13142250 ↗
14. Amjadi M, Fatemi A. Multiaxial fatigue behavior of thermoplastics including mean stress and notch effects: experiments and modeling. Int J Fatigue. 2020;136: 105571. https://doi.org/10.1016/j.ijfatigue.2020.105571.10.1016/j.ijfatigue.2020.105571 ↗
15. Li A, Mao Q, Li J, Li Y, Li X, Huang J, et al. Review on methodologies of fatigue property prediction for carbon fiber reinforced polymer. Compos Part B Eng. 2024;284: 111659. https://doi.org/10.1016/J.COMPOSITESB.2024.111659.10.1016/J.COMPOSITESB.2024.111659 ↗
16. Duda S, Smolnicki M, Zielonka P, Stabla P, Lesiuk G. Experimental and numerical study on the multiaxial fatigue behavior of thin-walled CFRP tubes (Under Review)
17. Duda S, Smolnicki M, Stabla P, Zielonka P, Osiecki T, Gao C, et al. Experimental characterization and modeling of cylindrical CFRP structures under quasi-static multiaxial loading conditions. Thin-Walled Struct. 2024;195: 111364. https://doi.org/10.1016/j.tws.2023.111364.10.1016/j.tws.2023.111364 ↗
18. Arora S, Chitkara R, Dhangar AS, Dubey D, Kumar R, Gupta A. A review of fatigue behavior of FRP composites. Mater Today Proc. 2022;64:1272–5. https://doi.org/10.1016/J.MATPR.2022.04.034.10.1016/J.MATPR.2022.04.034 ↗
19. Weng J, Meng T, Wen W, Weng S. Multiaxial fatigue life prediction of composite materials. Chin J Aeronaut. 2017;30:1012–20. https://doi.org/10.1016/J.CJA.2017.03.019.10.1016/J.CJA.2017.03.019 ↗
20. Paul R, Greenhalgh E, Silvestre P. Failure mechanisms in polymer matrix composites. Woodhead Publishing Limited; 2012.
21. Nairn JA, Hu S. Matrix microcracking. In: Talreja R, editor. Damage mechanics of composite materials. Composite materials series, vol. 9. Elsevier; 1994. p. 187–243.
22. Talreja R. Damage Characterization. vol. 4. Second Edi. Elsevier Science Publishers B.V.; 1991. https://doi.org/10.1016/B978-0-444-70507-5.50007-X.10.1016/B978-0-444-70507-5.50007-X ↗
23. de Menezes EAW, Lisbôa TV, Almeida JHS, Spickenheuer A, Amico SC, Marczak RJ. On the winding pattern influence for filament wound cylinders under axial compression, torsion, and internal pressure loads. Thin-Walled Struct. 2023;191: 111041. https://doi.org/10.1016/j.tws.2023.111041.10.1016/j.tws.2023.111041 ↗
24. Kobayashi T, Shockey DA. Fracture surface topography analysis (FRASTA)—development, accomplishments, and future applications. Eng Fract Mech. 2010;77:2370–84. https://doi.org/10.1016/J.ENGFRACMECH.2010.05.016.10.1016/J.ENGFRACMECH.2010.05.016 ↗
25. Macek W, Kopec M, Laska A, Kowalewski ZL. Entire fracture surface topography parameters for fatigue life assessment of 10H2M steel. J Constr Steel Res. 2024;221: 108890. https://doi.org/10.1016/J.JCSR.2024.108890.10.1016/J.JCSR.2024.108890 ↗
26. Macek W, Branco R, Podulka P, Kopec M, Zhu SP, Domingos Costa J. A brief note on entire fracture surface topography parameters for 18Ni300 maraging steel produced by LB-PBF after LCF. Eng Fail Anal. 2023;153: 107541. https://doi.org/10.1016/J.ENGFAILANAL.2023.107541.10.1016/J.ENGFAILANAL.2023.107541 ↗
27. Fatemi A, Socie DF. A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract Eng Mater Struct. 1988;11:149–65.10.1111/j.1460-2695.1988.tb01169.x ↗
28. Quaresimin M, Carraro PA. Damage initiation and evolution in glass/epoxy tubes subjected to combined tension–torsion fatigue loading. Int J Fatigue. 2014;63:25–35. https://doi.org/10.1016/j.ijfatigue.2014.01.002.10.1016/j.ijfatigue.2014.01.002 ↗
29. Quaresimin M, Carraro PA, Maragoni L. Influence of load ratio on the biaxial fatigue behaviour and damage evolution in glass/epoxy tubes under tension–torsion loading. Compos Part A Appl Sci Manuf. 2015;78:294–302. https://doi.org/10.1016/j.compositesa.2015.08.009.10.1016/j.compositesa.2015.08.009 ↗
30. Quaresimin M, Carraro PA, Mikkelsen LP, Lucato N, Vivian L, Brøndsted P, et al. Damage evolution under cyclic multiaxial stress state: a comparative analysis between glass/epoxy laminates and tubes. Compos Part B Eng. 2014;61:282–90. https://doi.org/10.1016/j.compositesb.2014.01.056.10.1016/j.compositesb.2014.01.056 ↗