Activation energies of oxidation in air for SPS-sintered zirconium and its alloys
Source abstract
Abstract
Abstract The research concerns the oxidation process of SPS-sintered zirconium-based materials. The sintered materials are characterized by residual porosity, which can affect the intensification of the oxidation process, compared to melted materials. On the basis of TGA tests carried out at temperatures of 500, 600, 700, and 800 °C, activation energies in air of sintered Zr, Zr–2.5Cu, Zr–2.5Nb, and Zr–2.5Mn, respectively, were calculated. Based on the studies of the microstructure and phase composition of oxidized materials, degradation mechanisms were analyzed for materials after annealing at 700 °C. In sintered Zr, Zr–2.5Cu, and Zr–2.5Nb oxidized at 700 °C, Si3N4 was detected. Si3N4 is formed at the zirconium oxide–zirconium boundary, in oxygen-deficient conditions. Zr–2.5Cu demonstrated the lowest tendency to oxidize despite the low values of activation energy for the oxidation process in air of 61 kJ/mol. This material showed the highest resistance to oxidation in air.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Banerjee S, Banerjee MK. Nuclear applications: zirconium alloys. In: Encyclopedia of materials: metals and alloys. Amsterdam: Elsevier; 2021. p. 350–63.
2. Hanawa T. Overview of metals and applications. In: Metals for biomedical devices. Amsterdam: Elsevier; 2019. p. 3–29.10.1016/B978-0-08-102666-3.00001-8 ↗
3. Northwood DO. The development and applications of zirconium alloys. Mater Des. 1985;6:58–70. https://doi.org/10.1016/0261-3069(85)90165-7.10.1016/0261-3069(85)90165-7 ↗
4. Tewari R, Krishna KWM, Neogy S, Lemaignan C. Zirconium and its alloys: properties and characteristics. J Nucl Mater. 2020. https://doi.org/10.1016/B978-0-12-803581-8.11735-7.10.1016/B978-0-12-803581-8.11735-7 ↗
5. Slobodyan M. Resistance, electron- and laser-beam welding of zirconium alloys for nuclear applications. Nucl Eng Technol. 2021;53:1049–78. https://doi.org/10.1016/j.net.2020.10.005.10.1016/j.net.2020.10.005 ↗
6. Zhang N, Xia C, Qin J, Li Q, Zhang X, Liu R. Research progress of novel zirconium alloys with high strength and toughness. J Met Mater. 2022;32:23–36. https://doi.org/10.55713/JMMM.V32I4.1526.10.55713/JMMM.V32I4.1526 ↗
7. Yang H, Shen J, Matsukawa Y, Satoh Y, Kano S, Zhao Z, Li Y, Li F, Abe H. Effects of alloying elements (Sn, Nb, Cr, and Mo) on the microstructure and mechanical properties of zirconium alloys. J Nucl Sci Technol. 2015;52:1162–73. https://doi.org/10.1080/00223131.2014.996622.10.1080/00223131.2014.996622 ↗
8. Pallab S, Gupta K. Recent advancements in fabrication of metal matrix composites: a systematic review. Materials. 2024;17(18):4635. https://doi.org/10.3390/ma17184635.10.3390/ma17184635 ↗
9. Ianko T, Panov S, Sushchyns O, Pylypenko M, Dmytrenko O. Zirconium alloy powders for manufacture of 3D printed articles used in nuclear power industry. Probl Atom Sci Technol. 2018;113:148–53.
10. Harooni A, Iravani M, Khajepour A, King JM, Khalifa A, Gerlich AP. Mechanical properties and microstructures in zirconium deposited by injected powder laser additive manufacturing. Addit Manuf. 2018;22:537–47. https://doi.org/10.1016/j.addma.2018.05.037.10.1016/j.addma.2018.05.037 ↗
11. Bissett H, Van Der Walt IJ, Havenga JL, Nel JT. Titanium and zirconium metal powder spheroidization by thermal plasma processes. J South Afr Inst Min Metal. 2015;115:937–42. https://doi.org/10.17159/2411-9717/2015/v115n10a6.10.17159/2411-9717/2015/v115n10a6 ↗
12. Tokita M. Progress of spark plasma sintering (SPS) method, systems ceramics applications and industrialization. Ceramics. 2021;4(2):160–98. https://doi.org/10.3390/ceramics4020014].10.3390/ceramics4020014] ↗
13. Harsimran S, Santosh K, Rakesh K. Overviev of corrosion and its control: a critical review. Proc Eng Sci. 2021;3:13–24. https://doi.org/10.24874/PES03.01.002.10.24874/PES03.01.002 ↗
14. Mosbacher M, Hilzenthaler M, Galetz M, Glatzel U. Oxygen diffusion hardened zirconium alloy ZrNb7—tribological properties derived from Calo wear and wheel on flat experiments. Tribol Int. 2022;165:107304. https://doi.org/10.1016/j.triboint.2021.107304.10.1016/j.triboint.2021.107304 ↗
15. Kautz E, Gwalani B, Yu Z, Varga T, Geelhood K, Devaraj A, Senor D. Investigating zirconium alloy corrosion with advanced experimental techniques: a review. J Nucl Mater. 2023;585:154586. https://doi.org/10.1016/j.jnucmat.2023.154586.10.1016/j.jnucmat.2023.154586 ↗
16. Li Z-Y, Guo X-W, Zheng M-Y, Ren Q-Y, Cai Z-B, Jiao Y-J. Characterization and fretting wear behavior of zirconium alloy treated in high temperature water. Wear. 2023;532–533:205078. https://doi.org/10.1016/j.wear.2023.205078.10.1016/j.wear.2023.205078 ↗
17. Vandegrift JL, Price PM, Stroud JP, Parga CJ, Van Rooyen IJ, Jaques BJ, Butt DP. Oxidation behavior of zirconium, zircaloy-3, zircaloy-4, Zr-1Nb, and Zr-25Nb in air and oxygen. Nucl Mater Energy. 2019;20:100692. https://doi.org/10.1016/j.nme.2019.100692.10.1016/j.nme.2019.100692 ↗
18. Roy C, Burgess B. A study of the stresses generated in zirconia films during the oxidation of zirconium alloys. Oxid Met. 1970;2:235–61. https://doi.org/10.1007/BF00614620.10.1007/BF00614620 ↗
19. Wanklyn JN, Silvester DR. A study of corrosion films on zirconium and its alloys by impedance measurements. J Electrochem Soc. 1958;105:647–54.10.1149/1.2428684 ↗
20. Cox B, Fidleris V. Enhanced low-temperature oxidation of zirconium alloys under irradiation. Zirconium in the nuclear industry. In: Eighth international symposium; 1989. p. 245–265. https://doi.org/10.1520/STP1023-EB.10.1520/STP1023-EB ↗
21. Ploc RA. Breakaway oxidation of zirconium at 573 K. J Nucl Mater. 1979;82:411–8.10.1016/0022-3115(79)90023-0 ↗
22. Godlewski J. How the tetragonal zirconia is stabilized in the oxide scale formed on zirconium alloys corroded at 400°C in steam. In: Garde AM, Bradlay ER, editors. Zirconium in the nuclear industry 10th symposium. USA: ASTM International, American Society for Testing and Materials; 1994. p. 663–83.
23. Ahmed T, Keys LH. The breakaway oxidation of zirconium and its alloys. J Less-Common Met. 1975;39:99–107.10.1016/0022-5088(75)90220-9 ↗
24. Bradhurst DH, Heuer PM. The influence of oxide stress on the breakaway oxidation of zircaloy-2. J Nucl Mater. 1970;37:35–47.10.1016/0022-3115(70)90180-7 ↗
25. Steinbrück M, Böttcher M. Air oxidation of Zircaloy-4, M5® and ZIRLOTM cladding alloys at high temperatures. J Nucl Mater. 2011;414(2):276–85. https://doi.org/10.1016/j.jnucmat.2011.04.012.10.1016/j.jnucmat.2011.04.012 ↗
26. Steinbrück M. High-temperature reaction of oxygen-stabilized α-Zr(O) with nitrogen. J Nucl Mater. 2014;447:46–55. https://doi.org/10.1016/j.jnucmat.2013.12.024.10.1016/j.jnucmat.2013.12.024 ↗
27. Hong SP, Ko YM, Kim CS. Magnetic susceptibility of Zr-Cu binary alloys. Mater Trans. 2014;55:1634–6. https://doi.org/10.2320/matertrans.M2014222.10.2320/matertrans.M2014222 ↗
28. Tawil G. Zirconium implant as an alternative to titanium implant in a case of type IV titanium allergy. Int J Oral Maxillofac Implants. 2020;35:639–44. https://doi.org/10.11607/jomi.7990.10.11607/jomi.7990 ↗
29. Panasiuk J, Noga P, Jaworska L, Skrzekut T, Onderka B, Pałka P, Podsiadło M, Putyra P, Stępień M. Preparation and testing of microstructure of the SPS zirconium with the addition of manganese. Int J Refract Met Hard Mater. 2020;92:105333. https://doi.org/10.1016/j.ijrmhm.2020.105333.10.1016/j.ijrmhm.2020.105333 ↗
30. Jaworska L, Skrzekut T, Stępień M, Pałka P, Boczkal G, Zwoliński A, Noga P, Podsiadło M, Wnuk R, Ostachowski P. The pressure compaction of Zr–Nb powder mixtures and selected properties of sintered and kobo-extruded Zr-xNb materials. Materials. 2021;14:3172. https://doi.org/10.3390/ma14123172.10.3390/ma14123172 ↗
31. Jaworska L, Panasiuk J, Putyra P, Stępień M, Noga P, Pałka P, Zwoliński A. The influence of powder characteristics on the sintering behaviour and impurity content of spark-plasma-sintered zirconium. Int J Refract Met Hard Mater. 2019;82:259–67. https://doi.org/10.1016/j.ijrmhm.2019.04.018.10.1016/j.ijrmhm.2019.04.018 ↗
32. Skrzekut T, Boczkal G, Zwoliński A, Noga P, Jaworska L, Pałka PM. The extrusion and SPS of zirconium–copper powders and studies of selected mechanical properties. Materials. 2021;14:3560. https://doi.org/10.3390/ma14133560.10.3390/ma14133560 ↗
33. Vompe T, Goviazin GG, Dolev O, Rudnik L, Katz-Demyanetz A. Sintering of additively manufactured zirconium by MoldJet technology. Powder Technol. 2024;436:119494. https://doi.org/10.1016/j.powtec.2024.119494.10.1016/j.powtec.2024.119494 ↗
34. Massalski TB. Binary Alloy Phase Diagrams. Metals Park, OH, USA: ASM; 1986. p. 1710–1.
35. Cox B. Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys. J Nucl Mater. 2005;336:331–68. https://doi.org/10.1016/j.jnucmat.2004.09.029.10.1016/j.jnucmat.2004.09.029 ↗
36. Cubicciotti D. The oxidation of zirconium at high temperatures. J Am Chem Soc. 1950;72:4138–41.10.1021/ja01165a081 ↗
37. Koneska Z, Manojlović R, Stoevska-Gogovska D. Air-thermal oxidation of zirconium. J Eng Process Manage. 2017;9(1):81–5. https://doi.org/10.7251/jepm1709081k.10.7251/jepm1709081k ↗
38. Lasserre M, Peres V, Pijolat M, Coindreau O, Duriez C, Mardon JP. Modelling of Zircaloy-4 accelerated degradation kinetics in nitrogen-oxygen mixtures at 850 °C. J Nucl Mater. 2015;462:221–9. https://doi.org/10.1016/j.jnucmat.2015.03.052.10.1016/j.jnucmat.2015.03.052 ↗
39. Beuzet E, Lamy JS, Bretault A, Simoni E. Modelling of Zry-4 cladding oxidation by air, under severe accident conditions using the MAAP4 code. Nucl Eng Des. 2011;241:1217–24. https://doi.org/10.1016/j.nucengdes.2010.04.024.10.1016/j.nucengdes.2010.04.024 ↗
40. Grzesik Z. Corrosion: fundamentals, testing, and protection. ASM Handbook Committee; 2003. p. 90–96.
41. Keys LH, Béranger G, De Gélas B, Lacombe P. Etude micrographique du processus de desquamation (break-away) au cours de l’oxydation du zirconium. J Less-Common Met. 1968;14:181–200.10.1016/0022-5088(68)90114-8 ↗
42. Steinbrück M. Prototypical experiments relating to air oxidation of Zircaloy-4 at high temperatures. J Nucl Mater. 2009;392:531–44. https://doi.org/10.1016/j.jnucmat.2009.04.018.10.1016/j.jnucmat.2009.04.018 ↗
43. Chhowalla M, Unalan HE. Thin films of hard cubic Zr3N4 stabilized by stress. Nat Mater. 2005;4:317–22. https://doi.org/10.1038/nmat1338.10.1038/nmat1338 ↗
44. Duriez C, Dupont T, Schmet B, Enoch F. Zircaloy-4 and M5® high temperature oxidation and nitriding in air. J Nucl Mater. 2008;380:30–45. https://doi.org/10.1016/j.jnucmat.2008.07.002.10.1016/j.jnucmat.2008.07.002 ↗