journal article·2021-06-01

Dynamic damage analysis of a ten-layer circular composite plate subjected to low-velocity impact

Hamed Raissi

Publisher page

Abstract

A new theoretical solution is presented to determine the stress distribution in a ten-layer simply-supported circular composite plate subjected to the low-velocity impact. The aim of the current study is the investigation of the dynamic analysis of the composite plate when a cylindrical impactor hits the top layer of the plate with an initial velocity of 1 m/s. The plate is made of two adhesive layers adhere two aluminum layers to a six-layer carbon-epoxy laminated plate. The classical non-adhesive elastic contact theory and Hunter's relationship are used to simulate the contact behavior in terms of time and contact radius. By using Hamilton's principle and Layerwise theory, thirty-two equations of motion are derived. Moreover, Johnson–Cook’s criteria, the plastic simulation model, the normal stress–strain failure criterion theory were used for failure analysis of the aluminum, adhesive, and carbon-epoxy layers, respectively. The numerical method was used to solve the thirty-two differential equations of motion based on the finite difference method. Moreover, the relationship between stress and strain is re-written in the numerical code so that the failure criterion theories are satisfied. Moreover, according to the defined failure criterion for each layer, the damage is checked at the end of every time step. In addition, the damping behavior of the composite plate after applying the contact pressure caused by the impact was also investigated. The results showed that the impact resulted in residual stress in the plate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Khodadadi A, Liaghat G, Ghafarokhi DS, Chizari M, Wang B. Numerical and experimental investigation of impact on bilayer aluminum-rubber composite plate. Thin Wall Struct. 2020;149:106673. https://doi.org/10.1016/j.tws.2020.106673.10.1016/j.tws.2020.106673 ↗
2. Sharifi S, Gohari S, Sharifiteshnizi M, Alebrahim R, Burvill C, Yahya Y, Vrcelj Z. Fracture of laminated woven GFRP composite pressure vessels under combined low-velocity impact and internal pressure. Arch Civil Mech Eng. 2018;18:1715–28. https://doi.org/10.1016/j.acme.2018.07.006.10.1016/j.acme.2018.07.006 ↗
3. Gao F, Xiao Z, Guan X, Zhu H, Du G. Dynamic behavior of CHS-SHS tubular T-joints subjected to low-velocity impact loading. Eng Struct. 2019;183:720–40. https://doi.org/10.1016/j.engstruct.2019.01.027.10.1016/j.engstruct.2019.01.027 ↗
4. Vo TP, Guan ZW, Cantwell WJ, Schleyer GK. Modelling of the low-impulse blast behaviour of fibre–metal laminates based on different aluminium alloys. Compos B Eng. 2013;44:141–51. https://doi.org/10.1016/j.compositesb.2012.06.013.10.1016/j.compositesb.2012.06.013 ↗
5. Miao H, Wu Z, Ying Z, Hu X. The numerical and experimental investigation on low-velocity impact response of composite panels: effect of fabric architecture. Compos Struct. 2019;227:111343. https://doi.org/10.1016/j.compstruct.2019.111343.10.1016/j.compstruct.2019.111343 ↗
6. Yao L, Wang C, He W, Lu S, Xie D. Influence of impactor shape on low-velocity impact behavior of fiber metal laminates combined numerical and experimental approaches. Thin Wall Struct. 2019;145:106399. https://doi.org/10.1016/j.tws.2019.106399.10.1016/j.tws.2019.106399 ↗
7. Fan W, Shen D, Yang T, Shao X. Experimental and numerical study on low-velocity lateral impact behaviors of RC. UHPFRC and UHPFRC-strengthened columns. Eng Struct. 2019;191:509–25. https://doi.org/10.1016/j.engstruct.2019.04.086.10.1016/j.engstruct.2019.04.086 ↗
8. Johnson EAF, Shen L, Guiamatsia I, Nguyen GD. Numerical investigation of the impact behaviour of bioinspired nacre-like aluminium composite plates. Compos Sci Technol. 2014;96:13–22. https://doi.org/10.1016/j.compscitech.2014.03.001.10.1016/j.compscitech.2014.03.001 ↗
9. Xiaoyu Z, Fei X, Yuyan Z, Feng W. Experimental and numerical investigation on damage behavior of honeycomb sandwich panel subjected to low-velocity impact. Compos Struct. 2020;236:111882. https://doi.org/10.1016/j.compstruct.2020.111882.10.1016/j.compstruct.2020.111882 ↗
10. Li Y, Yang Y, Li J, Wang B, Liao Y. Experimental-numerical analysis of failure of adhesively bonded lap joints under transverse impact and different temperatures. Int J Impact Eng. 2020;140:103541. https://doi.org/10.1016/j.ijimpeng.2020.103541.10.1016/j.ijimpeng.2020.103541 ↗
11. Gurgen S. Low-velocity impact performance of UHMWPE composites consolidated with carbide particles. Arch Civil Mech Eng. 2020;20:38. https://doi.org/10.1007/s43452-020-00042-0.10.1007/s43452-020-00042-0 ↗
12. Sakly A, Laksimi A, Kebir H, Benmedakhen S. Experimental and modelling study of low velocity impacts on composite sandwich structures for railway applications. Eng Fail Anal. 2016;68:22–31. https://doi.org/10.1016/j.engfailanal.2016.03.001.10.1016/j.engfailanal.2016.03.001 ↗
13. Liao B, Zhou J, Li Y, Wang P, Xi L, Gao R, Bo K, Fang D. Damage accumulation mechanism of composite laminates subjected to repeated low velocity impacts. Int J Mech Sci. 2020;182:105783. https://doi.org/10.1016/j.ijmecsci.2020.105783.10.1016/j.ijmecsci.2020.105783 ↗
14. Huo X, Liu H, Luo Q, Sun G, Li Q. On low-velocity impact response of foam-core sandwich panels. Int J Mech Sci. 2020;181:105681. https://doi.org/10.1016/j.ijmecsci.2020.105681.10.1016/j.ijmecsci.2020.105681 ↗
15. Chunping X, Qinghua Q, Mingshi W, Xuehui Y, Shangjun C, Wei Z, Yuanming X, Jianxun Z, Jianping Z, Tiejun W. Low-velocity impact response of sandwich beams with a metal foam core: Experimental and theoretical investigations. Int J Impact Eng. 2019;130:172–83. https://doi.org/10.1016/j.ijimpeng.2019.04.014.10.1016/j.ijimpeng.2019.04.014 ↗
16. He W, Liu J, Wang S, Xie D. Low-velocity impact behavior of X-Frame core sandwich structures–experimental and numerical investigation. Thin Wall Struct. 2018;131:718–35. https://doi.org/10.1016/j.tws.2018.07.042.10.1016/j.tws.2018.07.042 ↗
17. Liu R, Chen PW. Modeling ignition prediction of HMX-based polymer bonded explosives under low velocity impact. Mech Mater. 2018;124:106–17. https://doi.org/10.1016/j.mechmat.2018.05.009.10.1016/j.mechmat.2018.05.009 ↗
18. Wang J, Ren X, Xu Y, Zhang W, Zhu J, Li B. Thermodynamic behavior of NiTi shape memory alloy against low-velocity impact: experiment and simulation. Int J Impact Eng. 2020;139:103532. https://doi.org/10.1016/j.ijimpeng.2020.103532.10.1016/j.ijimpeng.2020.103532 ↗
19. Liu B, Han Q, Zhong X, Lu Z. The impact damage and residual load capacity of composite stepped bonding repairs and joints. Compos B Eng. 2019;158:339–51. https://doi.org/10.1016/j.compositesb.2018.09.096.10.1016/j.compositesb.2018.09.096 ↗
20. Fan W, Liu B, Huang X, Sun Y. Efcient modeling of flexural and shear behaviors in reinforced concrete beams and columns subjected to low-velocity impact loading. Eng Struct. 2019;195:22–50. https://doi.org/10.1016/j.engstruct.2019.05.082.10.1016/j.engstruct.2019.05.082 ↗
21. Gao Q, Liao WH, Wang L. On the low-velocity impact responses of auxetic double arrowed honeycomb. Aerosp Sci Technol. 2020;98:105698. https://doi.org/10.1016/j.ast.2020.105698.10.1016/j.ast.2020.105698 ↗
22. Allam O, Draiche K, Bousahla AA, Bourada F, Tounsi A, Benrahou KH, Mahmoud SR, Bedia EAA, Tounsi A. A generalized 4-unknown refined theory for bending and free vibration analysis of laminated composite and sandwich plates and shells. Comput Concrete. 2020;26:185–201. https://doi.org/10.12989/cac.2020.26.2.185.10.12989/cac.2020.26.2.185 ↗
23. Belbachir N, Bourada M, Draiche K, Tounsi A, Bourada F, Bousahla AA, Mahmoud SR. Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory. Smart Struct Syst. 2020;25:409–422. https://doi.org/10.12989/sss.2020.25.4.409.10.12989/sss.2020.25.4.409 ↗
24. Draiche K, Bousahla AA, Tounsi A, Alwabli AS, Tounsi A, Mahmoud SR. Static analysis of laminated reinforced composite plates using a simple first-order shear deformation theory. Comput Concrete. 2019;24:369–378. https://doi.org/10.12989/cac.2019.24.4.369.10.12989/cac.2019.24.4.369 ↗
25. Li DH, Zhang F. Full extended layerwise method for the simulation of laminated composite plates and shells. Comput Struct. 2017;187:101–13. https://doi.org/10.1016/j.compstruc.2016.10.023.10.1016/j.compstruc.2016.10.023 ↗
26. Alipour MM, Shaban M. Natural frequency and bending analysis of heterogeneous polar orthotropic-faced sandwich panels in the existence of in-plane pre-stress. Arch Civil Mech Eng. 2020;20:111. https://doi.org/10.1007/s43452-020-00105-2.10.1007/s43452-020-00105-2 ↗
27. Garg A, Chalak HD, Chakrabarti A. Comparative study on the bending of sandwich FGM beams made up of different material variation laws using refined layerwise theory. Mech Mater. 2020;151:103634. https://doi.org/10.1016/j.mechmat.2020.103634.10.1016/j.mechmat.2020.103634 ↗
28. Pekatsinas CS, Saravanos DA. A cubic spline layerwise time domain spectral FE for guided wave simulation in laminated composite plate structures with physically modeled active piezoelectric sensors. Int J Sol Struct. 2017;124:176–91. https://doi.org/10.1016/j.ijsolstr.2017.06.031.10.1016/j.ijsolstr.2017.06.031 ↗
29. Yasin MY, Khalid HM, Beg MS. Exact solution considering layerwise mechanics for laminated composite and sandwich curved beams of deep curvatures. Compos Struct. 2020;244:112258. https://doi.org/10.1016/j.compstruct.2020.112258.10.1016/j.compstruct.2020.112258 ↗
30. Arefi M, Civalek O. Static analysis of functionally graded composite shells on elastic foundations with nonlocal elasticity theory. Arch Civil Mech Eng. 2020;20:22. https://doi.org/10.1007/s43452-020-00032-2.10.1007/s43452-020-00032-2 ↗
31. Abualnour M, Chikh A, Hebali H, Kaci A, Tounsi A, Bousahla AA, Tounsi A. Thermomechanical analysis of antisymmetric laminated reinforced composite plates using a new four variable trigonometric refined plate theory. Comput Concrete. 2019;24:489–498. https://doi.org/10.12989/cac.2019.24.6.489.10.12989/cac.2019.24.6.489 ↗
32. Belbachir N, Draich K, Bousahla AA, Bourada M, Tounsi A, Mohammadimehr M. Bending analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal and mechanical loadings. Steel Compos Struct. 2019;33:81–92. https://doi.org/10.12989/scs.2019.33.1.081.10.12989/scs.2019.33.1.081 ↗
33. Sahla M, Saidi H, Draiche K, Bousahla AA, Bourada F, Tounsi A. Free vibration analysis of angle-ply laminated composite and soft core sandwich plates. Steel Compos Struct. 2019;33:663–679. https://doi.org/10.12989/scs.2019.33.5.663.10.12989/scs.2019.33.5.663 ↗
34. Kharghani N, Soares CG. Analysis of composite laminates containing through-the-width and embedded delamination under bending using layerwise HSDT. Eur J Mech A Sol. 2020;82:104003. https://doi.org/10.1016/j.euromechsol.2020.104003.10.1016/j.euromechsol.2020.104003 ↗
35. Mondal S, Ramachandra LS. Nonlinear dynamic pulse buckling of imperfect laminated composite plate with delamination. Int J Solids Struct. 2020;198:170–82. https://doi.org/10.1016/j.ijsolstr.2020.04.010.10.1016/j.ijsolstr.2020.04.010 ↗
36. Rakocevic M, Popovic S, Ivanisevic N. A computational method for laminated composite plates based on layerwise theory. Compos B Eng. 2017;122:202–18. https://doi.org/10.1016/j.compositesb.2017.03.044.10.1016/j.compositesb.2017.03.044 ↗
37. Alipour MM. Transient forced vibration response analysis of heterogeneous sandwich circular plates under viscoelastic boundary support. Arch Civil Mech Eng. 2018;18:12–31. https://doi.org/10.1016/j.acme.2017.05.007.10.1016/j.acme.2017.05.007 ↗
38. Raissi H. Stress analysis in adhesive layers of a five-layer circular sandwich plate subjected to temperature gradient based on layerwise theory. Mech Based Design Struct Mach. 2020; (In Press). https://doi.org/10.1080/15397734.2020.1776619.10.1080/15397734.2020.1776619 ↗
39. Nikrad SF, Asadi H, Ozbakkaloglu T. Compressive instability of open section nanocomposite struts using a layerwise theory. Comput Methods Appl Mech Eng. 2019;335:820–39. https://doi.org/10.1016/j.cma.2019.07.001.10.1016/j.cma.2019.07.001 ↗
40. Alipour MM. Effects of elastically restrained edges on FG sandwich annular plates by using a novel solution procedure based on layerwise formulation. Arch Civil Mech Eng. 2016;16:678–94. https://doi.org/10.1016/j.acme.2016.04.015.10.1016/j.acme.2016.04.015 ↗