journal article·2025-01-27Open access

Seawater-mixed concretes containing supplementary cementitious materials: compressive strength, e-modulus, electrical resistivity, and life cycle assessment

Sundar Rathnarajan, Joao Nuno Pacheco, Francisco Capucha, Javier Valencia, Mateusz Techman, Pawel Sikora

Abstract

Abstract Water and concrete are the materials humans consume the most on earth. By 2040, several countries are expected to face extreme water stress and the need for significant growth in their infrastructure simultaneously. Water is a fundamental ingredient for concrete production, and the need for infrastructure growth can further increase the water demand for concrete production and thus affect these regions facing water scarcity. Including supplementary cementitious materials (SCMs), non-metallic fibres, and coated/polymer reinforcements can increase the feasibility of producing concrete with seawater (SW). There is a lack of information on the long-term strength and durability properties of SW-mixed concretes (SWC) produced with SCMs. This paper optimises binder compositions with CEM I, fly ash, ground granulated blast furnace slag (slag), and metakaolin suitable for adapting SWC based on performance indicators. Binary and ternary blended concretes of similar binder content (360 kg/m3) and w/b (0.45) were designed and cast with the SCMs mentioned above. Compressive strength, surface resistivity, and accelerated carbonation tests were conducted on the concrete produced with freshwater (FW) and seawater (SW). SWC produced with 30% slag and 15% metakaolin had higher electrical resistivity and an improvement in compressive strength (up to 30%) than other combinations used for producing SWC. Life cycle assessment identified that the concretes produced with fly ash, and ternary combination of fly ash and metakaolin had the least water depletion potential (WDP) compared to other SW-mixed concretes. Also, the replacement of FW by SW reduces the WDP up to 50%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. World Water Assessment Programme (United Nations), UN-Water, Unesco, Water for prosperity and peace, n.d.
2. Kuzma S, Saccoccia L, Chertock M. 25 Countries, Housing One-quarter of the Population, Face Extremely High Water Stress Get water-related insights from WRI sent straight to your inbox, 2023.
3. Wada Y, Flörke M, Hanasaki N, Eisner S, Wada Y, Flörke M, Hanasaki N, Eisner S, Fischer G, Tramberend S, Satoh Y, Van Vliet MTH, Yillia P, Ringler C, Burek P, Wiberg D. Modeling global water use for the 21st century: Water Futures and Solutions (WFaS) initiative and its approaches Modeling global water use for the 21st century: the Water Futures and Solutions (WFaS) initiative and its approaches. Geosci Model Dev. 2016;9:175–222. https://doi.org/10.5194/gmdd-8-6417-2015.10.5194/gmdd-8-6417-2015 ↗
4. Boretti A, Rosa L. Reassessing the projections of the World Water Development Report. NPJ Clean Water. 2019. https://doi.org/10.1038/s41545-019-0039-9.10.1038/s41545-019-0039-9 ↗
5. Miller SA, Horvath A, Monteiro PJM. Impacts of booming concrete production on water resources worldwide. Nat Sustain. 2018;1:69–76. https://doi.org/10.1038/s41893-017-0009-5.10.1038/s41893-017-0009-5 ↗
6. EN 1008, Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete., 2002.
7. Rathnarajan S, Sikora P. Seawater-mixed concretes containing natural and sea sand aggregates—a review. Results Eng. 2023;20: 101457. https://doi.org/10.1016/j.rineng.2023.101457.10.1016/j.rineng.2023.101457 ↗
8. Jackson MD, Moon J, Gotti E, Taylor R, Chae SR, Kunz M, Emwas AH, Meral C, Guttmann P, Levitz P, Wenk HR, Monteiro PJM. Material and elastic properties of Al-tobermorite in ancient roman seawater concrete. J Am Ceram Soc. 2013;96:2598–606. https://doi.org/10.1111/jace.12407.10.1111/jace.12407 ↗
9. Ashraf W, Borno IB, Khan RI, Siddique S, Haque MI, Tahsin A. Mimicking the cementation mechanism of ancient Roman seawater concrete using calcined clays. Appl Clay Sci. 2022. https://doi.org/10.1016/j.clay.2022.106696.10.1016/j.clay.2022.106696 ↗
10. Thomas MDA, Hooton RD, Scott A, Zibara H. The effect of supplementary cementitious materials on chloride binding in hardened cement paste. Cem Concr Res. 2012;42:1–7. https://doi.org/10.1016/j.cemconres.2011.01.001.10.1016/j.cemconres.2011.01.001 ↗
11. Khatibmasjedi M, Ramanathan S, Suraneni P, Nanni A. Compressive strength development of seawater-mixed concrete subject to different curing regimes. ACI Mater J. 2020;117:3–12. https://doi.org/10.14359/51725973.10.14359/51725973 ↗
12. Xie Q, Xiao J, Zhang K, Zong Z. Compressive behavior and microstructure of concrete mixed with natural seawater and sea sand, Frontiers of Structural and Civil. Engineering. 2021;15:1347–57. https://doi.org/10.1007/s11709-021-0780-2.10.1007/s11709-021-0780-2 ↗
13. Wang J, Liu E, Li L. Multiscale investigations on hydration mechanisms in seawater OPC paste. Constr Build Mater. 2018;191:891–903. https://doi.org/10.1016/j.conbuildmat.2018.10.010.10.1016/j.conbuildmat.2018.10.010 ↗
14. Younis A, Ebead U, Suraneni P, Nanni A. Fresh and hardened properties of seawater-mixed concrete. Constr Build Mater. 2018;190:276–86. https://doi.org/10.1016/j.conbuildmat.2018.09.126.10.1016/j.conbuildmat.2018.09.126 ↗
15. Wang J, Xie J, Wang Y, Liu Y, Ding Y. Rheological properties, compressive strength, hydration products and microstructure of seawater-mixed cement pastes. Cem Concr Compos. 2020. https://doi.org/10.1016/j.cemconcomp.2020.103770.10.1016/j.cemconcomp.2020.103770 ↗
16. Alomayri T, Amir MT, Ali B, Raza SS, Hamad M. Mechanical, tidal erosion, and drying shrinkage behaviour of high performance seawater concrete incorporating the high volume of GGBS and polypropylene fibre. J Build Eng. 2023;76: 107377. https://doi.org/10.1016/j.jobe.2023.107377.10.1016/j.jobe.2023.107377 ↗
17. Sikora P, Lootens D, Liard M, Stephan D. The effects of seawater and nanosilica on the performance of blended cements and composites. Appl Nanosci (Switzerland). 2020;10:5009–26. https://doi.org/10.1007/s13204-020-01328-8.10.1007/s13204-020-01328-8 ↗
18. Liu J, An R, Jiang Z, Jin H, Zhu J, Liu W, Huang Z, Xing F, Liu J, Fan X, Sui T. Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.126333.10.1016/j.conbuildmat.2022.126333 ↗
19. Cai HM, Qing WU, Shen L. Research on frost resistance of seawater sea-stone concrete. In: IOP Conf Ser Earth Environ Sci, Institute of Physics Publishing, 2019. https://doi.org/10.1088/1755-1315/267/5/052001.10.1088/1755-1315/267/5/052001 ↗
20. Zhang Y, Xu X, Zhao Q, Chang J, Ding S, Liu X, Poon CS. Long-term investigation of alkali-silica reaction behaviors in seawater sea-sand concrete. Cem Concr Compos. 2024. https://doi.org/10.1016/j.cemconcomp.2024.105611.10.1016/j.cemconcomp.2024.105611 ↗
21. De Weerdt K. Chloride binding in concrete: recent investigations and recognised knowledge gaps: RILEM Robert L’Hermite Medal Paper 2021, Materials and Structures/Materiaux et Constructions 54 (2021). https://doi.org/10.1617/s11527-021-01793-9.10.1617/s11527-021-01793-9 ↗
22. Ji Y, Zhang X, Pel L, Sun Z. NMR investigations on Cl− and Na+ ion binding during the early hydration process of C3S, C3A and cement paste: a combined modelling and experimental study. Compos B Eng. 2024. https://doi.org/10.1016/j.compositesb.2024.111624.10.1016/j.compositesb.2024.111624 ↗
23. Zhao Y, Hu X, Yuan Q, Wu Z, Shi C. Effects of water to binder ratio on the chloride binding behaviour of artificial seawater cement paste blended with metakaolin and silica fume. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.129110.10.1016/j.conbuildmat.2022.129110 ↗
24. Guo B, Qiao G, Han P, Li Z, Fu Q. Effect of natural carbonation on chloride binding behaviours in OPC paste investigated by a thermodynamic model. J Build Eng. 2022. https://doi.org/10.1016/j.jobe.2022.104021.10.1016/j.jobe.2022.104021 ↗
25. Dasar A, Patah D, Hamada H, Sagawa Y, Yamamoto D. Applicability of seawater as a mixing and curing agent in 4-year-old concrete. Constr Build Mater. 2020. https://doi.org/10.1016/j.conbuildmat.2020.119692.10.1016/j.conbuildmat.2020.119692 ↗
26. Jiang Z, Li S, Fu C, Dong Z, Zhang X, Jin N, Xia T. Macrocell corrosion of steel in concrete under carbonation, internal chloride admixing and accelerated chloride penetration conditions. Materials. 2021. https://doi.org/10.3390/ma14247691.10.3390/ma14247691 ↗
27. Pan C, Li X, Mao J. The effect of a corrosion inhibitor on the rehabilitation of reinforced concrete containing sea sand and seawater. Materials. 2020. https://doi.org/10.3390/ma13061480.10.3390/ma13061480 ↗
28. Sikora P, Afsar L, Rathnarajan S, Nikravan M, Chung SY. Seawater—mixed lightweight aggregate concretes with dune sand, waste glass and nanosilica: experimental and life cycle analysis. Int J Concr Struct Mater. 2023. https://doi.org/10.1186/s40069-023-00613-4.10.1186/s40069-023-00613-4 ↗
29. Rathnarajan S, Cendrowski K, Sibera D, Sikora P. Comprehensive evaluation of early-age hydration and compressive strength development in seawater-mixed binary and ternary cementitious systems. Arch Civ Mech Eng. 2024. https://doi.org/10.1007/s43452-024-00932-7.10.1007/s43452-024-00932-7 ↗
30. EN 197 - Part I, Cement. Part 1, Composition, specifications and conformity criteria for common cements. BSI, 2000.
31. ASTM-D1141-98, Standard Practice for Preparation of Substitute Ocean Water (1998).
32. British Standards Institution, EN 12350-–2 - Testing fresh concrete: Slump test, 2009.
33. British Standards Institution., Testing hardened concrete. Part 3, Compressive strength of test specimens., BSI, 2002.
34. British Standards Institution. Testing hardened concrete. Part 13, Determination of secant modulus of elasticity in compression, 2013.
35. Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration American Association of State Highway and Transportation Officials, 2015. www.salmanco.comwww.salmanco.com.
36. LNEC E 391 specification: concrete - determination of resistance to carbonation, LNEC Portugal, 1993.
37. Li Q, Geng H, Shui Z, Huang Y. Effect of metakaolin addition and seawater mixing on the properties and hydration of concrete. Appl Clay Sci. 2015;115:51–60. https://doi.org/10.1016/j.clay.2015.06.043.10.1016/j.clay.2015.06.043 ↗
38. Wegian FM. Effect of seawater for mixing and curing on structural concrete. IES J Part A. 2010;3:235–43. https://doi.org/10.1080/19373260.2010.521048.10.1080/19373260.2010.521048 ↗
39. Dehuai W, Zhaoyuan C. On predicting compressive strengths of mortars with ternary blends of cement, GGBFS and fly ash. Cem Concr Res. 1997;27(4):487–93. https://doi.org/10.1016/S0008-8846(97)00039-2.10.1016/S0008-8846(97)00039-2 ↗
40. Zhao Y, Hu X, Shi C, Zhang Z, Zhu D. A review on seawater sea-sand concrete: mixture proportion, hydration, microstructure and properties. Constr Build Mater. 2021. https://doi.org/10.1016/j.conbuildmat.2021.123602.10.1016/j.conbuildmat.2021.123602 ↗
41. Shi Z, Shui Z, Li Q, Geng H. Combined effect of metakaolin and sea water on performance and microstructures of concrete. Constr Build Mater. 2015;74:57–64. https://doi.org/10.1016/j.conbuildmat.2014.10.023.10.1016/j.conbuildmat.2014.10.023 ↗
42. Li Q, Geng H, Huang Y, Shui Z. Chloride resistance of concrete with metakaolin addition and seawater mixing: a comparative study. Constr Build Mater. 2015;101:184–92. https://doi.org/10.1016/j.conbuildmat.2015.10.076.10.1016/j.conbuildmat.2015.10.076 ↗
43. Li Z, Ding Z. Property improvement of Portland cement by incorporating with metakaolin and slag. Cem Concr Res. 2003;33:579–84. https://doi.org/10.1016/S0008-8846(02)01025-6.10.1016/S0008-8846(02)01025-6 ↗
44. Pan D, Yaseen SA, Chen K, Niu D, Ying Leung CK, Li Z. Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete. J Build Eng. 2021;42: 103006. https://doi.org/10.1016/j.jobe.2021.103006.10.1016/j.jobe.2021.103006 ↗
45. Cox RN, Cigna R, Vennesland O, Valente T. COST 509 corrosion and protection of metals in contact with concrete F, Brussels, 1997.
46. Dhandapani Y, Sakthivel T, Santhanam M, Gettu R, Pillai RG. Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3). Cem Concr Res. 2018;107:136–51. https://doi.org/10.1016/j.cemconres.2018.02.005.10.1016/j.cemconres.2018.02.005 ↗
47. Montanari L, Suraneni P, Tsui-Chang M, Khatibmasjedi M, Ebead U, Weiss J, Nanni A. Hydration, pore solution, and porosity of cementitious pastes made with seawater. J Mater Civ Eng. 2019. https://doi.org/10.1061/(asce)mt.1943-5533.0002818.10.1061/(asce)mt.1943-5533.0002818 ↗
48. Ming X, Li Y, Liu Q, Wang M, Cai Y, Chen B, Li Z. Chloride binding behaviors and early age hydration of tricalcium aluminate in chloride-containing solutions. Cem Concr Compos. 2023. https://doi.org/10.1016/j.cemconcomp.2023.104928.10.1016/j.cemconcomp.2023.104928 ↗
49. Homayoonmehr R, Ramezanianpour AA, Mirdarsoltany M. Influence of metakaolin on fresh properties, mechanical properties and corrosion resistance of concrete and its sustainability issues: a review. J Build Eng. 2021. https://doi.org/10.1016/j.jobe.2021.103011.10.1016/j.jobe.2021.103011 ↗
50. Lübeck A, Gastaldini ALG, Barin DS, Siqueira HC. Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag. Cem Concr Compos. 2012;34:392–9. https://doi.org/10.1016/j.cemconcomp.2011.11.017.10.1016/j.cemconcomp.2011.11.017 ↗
51. Long WJ, Zhang X, Feng GL, Xie J, Xing F, Dong B, Zhang J, Khayat KH. Investigation on chloride binding capacity and stability of Friedel’s salt in graphene oxide reinforced cement paste. Cem Concr Compos. 2022. https://doi.org/10.1016/j.cemconcomp.2022.104603.10.1016/j.cemconcomp.2022.104603 ↗
52. de Medeiros MHF, Raisdorfer JW, Hoppe Filho J, Medeiros-Junior RA. Partial replacement and addition of fly ash in Portland cement: influences on carbonation and alkaline reserve. J Build Pathol Rehabil. 2017. https://doi.org/10.1007/s41024-017-0023-z.10.1007/s41024-017-0023-z ↗
53. Chindaprasirt P, Rukzon S. Pore structure changes of blended cement pastes containing fly ash, rice husk ash, and palm oil fuel ash caused by carbonation. J Mater Civ Eng. 2009;21:666–71. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:11(666).10.1061/(ASCE)0899-1561(2009)21:11(666) ↗
54. Gruyaert E, Van Den Heede P, De Belie N. Carbonation of slag concrete: effect of the cement replacement level and curing on the carbonation coefficient—effect of carbonation on the pore structure. Cem Concr Compos. 2013;35:39–48. https://doi.org/10.1016/j.cemconcomp.2012.08.024.10.1016/j.cemconcomp.2012.08.024 ↗
55. Neville AM. Properties of concrete. 4th edition, Prentice Hall; London; 1995.
56. Bier TA. Influence of type of cement and curing on carbonation progress and pore structure of hydrated cement pastes. In: MRS Online Proceedings Library (OPL), 1986; pp. 123–30.10.1557/PROC-85-123 ↗
57. Rivera RA, Sanjuán MÁ, Martín DA. Granulated blast-furnace slag and coal fly ash ternary portland cements optimization. Sustainability (Switzerland). 2020;12:1–15. https://doi.org/10.3390/su12145783.10.3390/su12145783 ↗
58. Bai J, Wild S, Sabir BB. Sorptivity and strength of air-cured and water-cured PC-PFA-MK concrete and the influence of binder composition on carbonation depth, Cem Concr Res. 2002;32(11):1813–21. https://doi.org/10.1016/S0008-8846(02)00872-4.10.1016/S0008-8846(02)00872-4 ↗
59. EN-15804: 2012 + A2:2019 - Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products, 2019.
60. Braga AM, Silvestre JD, de Brito J. Compared environmental and economic impact from cradle to gate of concrete with natural and recycled coarse aggregates. J Clean Prod. 2017;162:529–43. https://doi.org/10.1016/j.jclepro.2017.06.057.10.1016/j.jclepro.2017.06.057 ↗
61. EcoEcoinvent LCA database v3.8, Swiss Centre for Life Cycle Inventories (2023).
62. Environmental Product Declaration according to EN 15804 and ISO 14025: Portland Cement (CEM I) produced in Europe, Brussels, 2020.
63. Environmental Product Declaration in accordance with ISO 14025 and EN 15804: Fly ash, Copen hagen, 2020. http://echa.europa.eu/candidate-list-table.
64. Environmental Product Declaration: In accordance with ISO 14025 AND EN15804: Ground Granulated Blast Furnace Slag, 2022. www.environdec.com.
65. Hájek P, Fiala C, Kynčlová M. Life cycle assessments of concrete structures—a step towards environmental savings. Struct Concr. 2011;12:13–22. https://doi.org/10.1002/suco.201000026.10.1002/suco.201000026 ↗