Stretch flanging behaviour and microstructural analysis of DP steel using punch stretching and incremental forming processes
Source abstract
Abstract
The main aim of the present study is to analyse the stretch flanging behaviour of the DP steel sheet using the punch stretching (PS) and incremental sheet forming (ISF) at different temperatures. Firstly, the material properties and Lankford coefficients have been determined using uniaxial tension tests. Subsequently, the stretch flanging process has been carried out experimentally on the specimens with different flange widths and lengths using PS and ISF processes. Different critical formability and quality parameters, namely, strain path, thickness distribution, forming forces, and geometrical accuracy, have been analysed experimentally and numerically. The minimum flange thickness has been found near the edge of the bend region, which is deformed in the uniaxial tension region. The local contact of the tool with the sheet in the ISF process led to the decrement in the deformation force and further helped in increasing the form accuracy of stretch-flanged components. Due to the low stiffness at the bottom of the flange, higher spring-back has been observed for higher flange lengths. Additionally, microstructural characteristics of deformed specimens have been evaluated using EBSD studies. The misorientations developed during deformation in PS_400 °C condition are higher than in other conditions. Its spread towards higher angles (> 15°) caused more strain hardening in the material, leading to higher flanging forces than PS_RT. Finally, the surface roughness of the deformed specimen is correlated with the microstructure using Taylor factor maps.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Pandre S, Morchhale A, Kotkunde N, Singh SK, Khanna N, Saxena A. Determination of warm deep drawing behavior of DP590 steel using numerical modeling and experimental process window. Arab J Sci Eng. 2021. https://doi.org/10.1007/s13369-021-05998-6.10.1007/s13369-021-05998-6 ↗
2. Pandre S, Morchhale A, Kotkunde N, Singh SK, Ravindran S. Prediction of forming limits and microstructural evolution during warm stretch forming of DP590 steel. Arch Civ Mech Eng. 2021;21:1–23. https://doi.org/10.1007/s43452-021-00262-y.10.1007/s43452-021-00262-y ↗
3. Wu Y, Uusitalo J, DeArdo AJ. Investigation of effects of processing on stretch-flangeability of the ultra-high strength, vanadium-bearing dual-phase steels. Mater Sci Eng A. 2020;797: 140094. https://doi.org/10.1016/j.msea.2020.140094.10.1016/j.msea.2020.140094 ↗
4. Yu X, Chen J, Chen J. Influence of curvature variation on edge stretchability in hole expansion and stretch flanging of advanced high-strength steel. Int J Adv Manuf Technol. 2016;86:1083–94. https://doi.org/10.1007/s00170-015-8251-3.10.1007/s00170-015-8251-3 ↗
5. Groover MP. Fundamentals of modern manufacturing: materials processes, and systems. New York: Wiley; 2007.
6. Kumar S, Ahmed M, Panthi SK. Effect of punch profile on deformation behaviour of AA5052 sheet in stretch flanging process. Arch Civ Mech Eng. 2020;20:18. https://doi.org/10.1007/s43452-020-00016-2.10.1007/s43452-020-00016-2 ↗
7. Kumar S, Ahmed M, Panthi SK. Investigation on the crack and thinning behavior of aluminum alloy 5052 sheet in stretch flanging process. J Fail Anal Prev. 2020;20:1212–28. https://doi.org/10.1007/s11668-020-00922-w.10.1007/s11668-020-00922-w ↗
8. Mori K, Abe Y, Norita K. Improvement of stretch flangeability of ultra-high strength sheets by gradually contacting punch. AIP Conf Proc. 2013;1532:122–7. https://doi.org/10.1063/1.4806815.10.1063/1.4806815 ↗
9. Dewang Y, Hora MS, Panthi S. Effect of process parameters on deformation behavior of AA 5052 sheets in stretch flanging process. Mater Today Proc. 2017;4:9316–26. https://doi.org/10.1016/J.MATPR.2017.07.291.10.1016/j.matpr.2017.07.291 ↗
10. Pandre S, Morchhale A, Kotkunde N, Kurra S. Processing of DP590 steel using single point incremental forming for automotive applications. Mater Manuf Process. 2021;36:1–9. https://doi.org/10.1080/10426914.2021.1942903.10.1080/10426914.2021.1942903 ↗
11. Martins PAF, Bay N, Skjoedt M, Silva MB. Theory of single point incremental forming. CIRP Ann. 2008;57:247–52. https://doi.org/10.1016/j.cirp.2008.03.047.10.1016/j.cirp.2008.03.047 ↗
12. Voswinckel H, Bambach M, Hirt G. Improving geometrical accuracy for flanging by incremental sheet metal forming. Int J Mater Form. 2015;8:391–9. https://doi.org/10.1007/s12289-014-1182-y.10.1007/s12289-014-1182-y ↗
13. Wen T, Zhang S, Zheng J, Huang Q, Liu Q. Bi-directional dieless incremental flanging of sheet metals using a bar tool with tapered shoulders. J Mater Process Technol. 2016;229:795–803. https://doi.org/10.1016/j.jmatprotec.2015.11.005.10.1016/j.jmatprotec.2015.11.005 ↗
14. Centeno G, Bagudanch I, Martínez-Donaire AJ, García-Romeu ML, Vallellano C. Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming. Mater Des. 2014;63:20–9. https://doi.org/10.1016/j.matdes.2014.05.066.10.1016/j.matdes.2014.05.066 ↗
15. Han K, Li X, Peng X, Wang H, Li D, Li Y, Li Q. Experimental and numerical study on the deformation mechanism of straight flanging by incremental sheet forming. Int J Mech Sci. 2019;160:75–89. https://doi.org/10.1016/j.ijmecsci.2019.06.024.10.1016/j.ijmecsci.2019.06.024 ↗
16. López-Fernández JA, Centeno G, Martínez-Donaire AJ, Morales-Palma D, Vallellano C. Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin Walled Struct. 2021;160: 107338. https://doi.org/10.1016/j.tws.2020.107338.10.1016/j.tws.2020.107338 ↗
17. ASTM E415-17. Test method for analysis of carbon and low-alloy steel by spark atomic emission spectrometry, ASTM International, West Conshohocken; 2017. https://doi.org/10.1520/E0415-17.10.1520/E0415-17 ↗
18. ASTM E8/E8M-21. Standard test methods for tension testing of metallic materials. ASTM International, West Conshohocken; 2021. https://doi.org/10.1520/E0008_E0008M-21.10.1520/E0008_E0008M-21 ↗
19. ASTM E517-19. Test method for plastic strain ratio r for sheet metal. ASTM International, West Conshohocken; 2019. https://doi.org/10.1520/E0517-19.10.1520/E0517-19 ↗
20. Kurra S, Regalla SP. Experimental and numerical studies on formability of extra-deep drawing steel in incremental sheet metal forming. J Market Res. 2014;3:158–71. https://doi.org/10.1016/j.jmrt.2014.03.009.10.1016/j.jmrt.2014.03.009 ↗
21. Moser N, Pritchet D, Ren H, Ehmann KF, Cao J. An efficient and general finite element model for double-sided incremental forming. J Manuf Sci Eng. 2016;138–14810.1115/1.4033483 ↗
22. Manikandan G, Verma RK, Biswas P. Effect of friction in stretch forming and its influence on the forming limit curve. Proc Inst Mech Eng Part B J Eng Manuf. 2015;229:973–81.10.1177/0954405414534434 ↗
23. Elford M, Saha P, Seong D, Haque MDZ, Yoon JW. Benchmark 3-incremental sheet forming. In: AIP conference Proceedings, American Institute of Physics, 2013. pp. 227–61.10.1063/1.4849983 ↗
24. Pandre S, Morchhale A, Kotkunde N, Singh SK. Influence of processing temperature on formability of thin-rolled DP590 steel sheet. Mater Manuf Process. 2020. https://doi.org/10.1080/10426914.2020.1743854.10.1080/10426914.2020.1743854 ↗
25. Silva MB, Skjoedt M, Atkins AG, Bay N, Martins PAF. Single-point incremental forming and formability–failure diagrams. J Strain Anal Eng Des. 2008;43:15–35. https://doi.org/10.1243/03093247JSA340.10.1243/03093247JSA340 ↗
26. Molaei MJ, Ekrami A. The effect of dynamic strain aging on subsequent mechanical properties of dual-phase steels. J Mater Eng Perform. 2010;19:607–10. https://doi.org/10.1007/s11665-009-9429-3.10.1007/s11665-009-9429-3 ↗
27. Ekrami A. High temperature mechanical properties of dual phase steels. Materials Letters. 2005;59(16):2070–2074. https://doi.org/10.1016/j.matlet.2005.02.01810.1016/j.matlet.2005.02.018 ↗
28. Duflou J, Tunc Y, Szekeres A, Vanherck P. Experimental study on force measurements for single point incremental forming. J Mater Process Technol. 2007;189:65–72. https://doi.org/10.1016/j.jmatprotec.2007.01.005.10.1016/j.jmatprotec.2007.01.005 ↗
29. Petek A, Kuzman K, Kopač J. Deformations and forces analysis of single point incremental sheet metal forming. Arch Mater Sci Eng. 2009;35:107–16.
30. Pandre S, Kotkunde N, Takalkar P, Morchhale A, Sujith R, Singh SK. Flow stress behavior, constitutive modeling, and microstructural characteristics of DP 590 steel at elevated temperatures. J Mater Eng Perform. 2019;28:7565–81. https://doi.org/10.1007/s11665-019-04497-y.10.1007/s11665-019-04497-y ↗
31. Bunge H-J. Hans-Joachim, X-ray texture analysis in materials and earth sciences. Eur J Mineral. 1997;9:735–62. https://doi.org/10.1127/ejm/9/4/0735.10.1127/ejm/9/4/0735 ↗
32. Han S, Choi S, Choi J, Seong H, Kim I. Effect of hot-rolling processing on texture and r-value of annealed dual-phase steels. Mater Sci Eng A. 2010;527:1686–94. https://doi.org/10.1016/j.msea.2009.11.016.10.1016/j.msea.2009.11.016 ↗
33. Choi S, Kim E, Woo W, Han SH, Kwak JH. The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension. Int J Plast. 2013;45:85–102. https://doi.org/10.1016/j.ijplas.2012.11.013.10.1016/j.ijplas.2012.11.013 ↗
34. Raabe L. Rolling and textures of BCC metals. Mater Sci Forum. 1994;162:597–610. https://doi.org/10.4028/www.scientific.net/MSF.157-162.597.10.4028/www.scientific.net/MSF.157-162.597 ↗
35. Goel S, Jayaganthan R, Singh IV, Srivastava D, Dey GK, Saibaba N. Texture evolution and ultrafine grain formation in cross-cryo-rolled Zircaloy-2. Acta Metallurgica Sinica (English Letters). 2015;28:837–46. https://doi.org/10.1007/s40195-015-0267-z.10.1007/s40195-015-0267-z ↗
36. Zhong Y, Yin F, Sakaguchi T, Nagai K, Yang K. Dislocation structure evolution and characterization in the compression deformed Mn–Cu alloy. Acta Mater. 2007;55:2747–56. https://doi.org/10.1016/j.actamat.2006.12.012.10.1016/j.actamat.2006.12.012 ↗
37. Pandre S, Morchhale A, Mahalle G, Kotkunde N, Suresh K, Singh SK. Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution. Arch Civ Mech Eng. 2021;21:1–20.10.1007/s43452-021-00243-1 ↗
38. Verlinden B, Driver J, Samajdar I, Doherty RD. Thermo-mechanical processing of metallic materials. Amsterdam: Elsevier; 2007.
39. Barnwal VK, Chakrabarty S, Tewari A, Narasimhan K. Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet. Int J Adv Manuf Technol. 2018;95:921–35.10.1007/s00170-017-1238-5 ↗
40. Zhao J, Jiang Z. Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242. https://doi.org/10.1016/j.pmatsci.2018.01.006.10.1016/j.pmatsci.2018.01.006 ↗
41. Masoumi M, Santos LP, Bastos IN, Tavares SS, da Silva MJ, de Abreu HF. Texture and grain boundary study in high strength Fe–18Ni–Co steel related to hydrogen embrittlement. Mater Des. 2016;91:90–7.10.1016/j.matdes.2015.11.093 ↗
42. Prasad KS, Panda SK, Kar SK, Murty SVSN, Sharma SC. Prediction of fracture and deep drawing behavior of solution treated Inconel-718 sheets: numerical modeling and experimental validation. Mater Sci Eng A. 2018;733:393–407.10.1016/j.msea.2018.07.007 ↗