article·2013-09-13

Characterization of microporous oxide layer synthesized on Ti–6Al–7Nb alloy by micro-arc oxidation

Tomasz Moskalewicz, Aleksandra Kruk, M. Kot, S. Kayali, A. Czyrska‐Filemonowicz

Publisher page

Abstract

Abstract In this work a microporous oxide layer was formed on two phase (α+β) Ti–6Al–7Nb titanium alloy by the micro-arc oxidation process in an electrolyte containing (CH 3 COO) 2 CaH 2 O and Na 3 PO 4 . The thickness of the surface layer was in the range of 2.7 μm–3.6 μm. Microstructure of the surface layer and the substrate alloy was characterized with use of scanning- and transmission electron microscopy as well as by X-ray diffractometry. The microstructure of the surface layer consisted of TiO 2 rutile and anatase nanocrystals as well as of amorphous regions containing mainly Ti, Ca and O atoms and a minority of P, Al and Nb ones. The surface layer was highly porous. The open pores, with diameter up to 6 µm, were homogenously distributed in the specimen surface. Electron tomography was used to investigate the pores morphology and spatial distribution. It was found that open pores exhibited a complex geometry. The closed pores had nearly spherical shape. Adhesion of the surface layer to the titanium alloy substrate was investigated by means of the scratch-test. The value of critical load L C2 =14 N indicates a good layer adhesion to the underlying substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.