Dynamical modelling of boom tower crane rigging systems: model selection for construction
Source abstract
Abstract
Abstract Accurate dynamical models are imperative to the development of accurate monitoring and control systems, which are foundational to safety in construction and infrastructure projects. However, the highly coupled non-linear dynamics of crane systems requires the application of many simplifying assumptions to the dynamical crane model. To achieve accurate control, simplifications should yield minimal error in modelled behaviour for maximal reduction in model complexity. However, limited information is available on the situational suitability of different combinations of simplifications to construction tower crane models. This paper informs designers of the optimal dynamical models to represent boom tower cranes, with respect to the crane characteristics and selection criteria. The optimal models are determined though the comparison of ten 2D and 3D dynamical models in representation of three variations of boom tower crane that are commonly deployed on construction sites. The comparison includes analysis of over 100 simulations and experimentation. The value of the presented optimal model selection framework is in facilitating systems designers to develop accurate crane monitoring and control systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dynamics and Control of Mechanical Systems · Structural Response to Dynamic Loads · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Hong K-S, Shah UH. Dynamics and control of industrial cranes. Berlin: Springer; 2019.10.1007/978-981-13-5770-1 ↗
2. Iturralde K et al. A cable driven parallel robot with a modular end effector for the installation of curtain wall modules. Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC), 2020.
3. Liang C-J, Kang S-C, Lee M-H. Ras: a robotic assembly system for steel structure erection and assembly. Int J Intell Robot Appl. 2017;1(4):459–76. https://doi.org/10.1007/s41315-017-0030-x.10.1007/s41315-017-0030-x ↗
4. Johns B, Arashpour M, Abdi E. Curtain wall installation for high-rise buildings: Critical review of current automation solutions and opportunities. In: Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC). (2020).10.22260/ISARC2020/0056 ↗
5. Choi SD, Guo L, Kim J, Xiong S. Comparison of fatal occupational injuries in construction industry in the United States, South Korea, and China. Int J Ind Ergon. 2019;71:64–74. https://doi.org/10.1016/j.ergon.2019.02.011.10.1016/j.ergon.2019.02.011 ↗
6. Gharaie E, Lingard H, Cooke T. Causes of fatal accidents involving cranes in the Australian construction industry. Constr Econ Build. 2015;15(2):1–12. https://doi.org/10.5130/AJCEB.v15i2.4244.10.5130/AJCEB.v15i2.4244 ↗
7. Fang Y, Cho YK, Durso F, Seo J. Assessment of operator’s situation awareness for smart operation of mobile cranes. Autom Constr. 2018;85:65–75. https://doi.org/10.1016/j.autcon.2017.10.007.10.1016/j.autcon.2017.10.007 ↗
8. Ouyang H, Tian Z, Yu L, Zhang G. Partial enhanced-coupling control approach for trajectory tracking and swing rejection in tower cranes with double-pendulum effect. Mech Syst Signal Process. 2021;156: 107613. https://doi.org/10.1016/j.ymssp.2021.107613.10.1016/j.ymssp.2021.107613 ↗
9. Ramli L, Mohamed Z, Abdullahi AM, Jaafar HI, Lazim IM. Control strategies for crane systems: a comprehensive review. Mech Syst Signal Process. 2017;95:1–23. https://doi.org/10.1016/j.ymssp.2017.03.015.10.1016/j.ymssp.2017.03.015 ↗
10. Rauscher F, Sawodny O. Modeling and control of tower cranes with elastic structure. IEEE Trans Control Syst Technol. 2021;29(1):64–79. https://doi.org/10.1109/TCST.2019.2961639.10.1109/TCST.2019.2961639 ↗
11. Abis C. Kalman Filter approaches on crane swing. Master’s thesis, Michigan Technological University (2012).
12. Wu Q, Wang X, Hua L, Xia M. Modeling and nonlinear sliding mode controls of double pendulum cranes considering distributed mass beams, varying roped length and external disturbances. Mech Syst Signal Process. 2021;158: 107756. https://doi.org/10.1016/j.ymssp.2021.107756.10.1016/j.ymssp.2021.107756 ↗
13. Huang J, Xie X, Liang Z. Control of bridge cranes with distributed-mass payload dynamics. IEEE/ASME Trans Mechatron. 2015;20(1):481–6. https://doi.org/10.1109/TMECH.2014.2311825.10.1109/TMECH.2014.2311825 ↗
14. Ye J, Huang J. Analytical analysis and oscillation control of payload twisting dynamics in a tower crane carrying a slender payload. Mech Syst Signal Process. 2021;158: 107763. https://doi.org/10.1016/j.ymssp.2021.107763.10.1016/j.ymssp.2021.107763 ↗
15. Peng J, Huang J, Singhose W. Payload twisting dynamics and oscillation suppression of tower cranes during slewing motions. Nonlinear Dyn. 2019;98(2):1041–8. https://doi.org/10.1007/s11071-019-05247-4.10.1007/s11071-019-05247-4 ↗
16. Yoon J, Nation S, Singhose W, Vaughan JE. Control of crane payloads that bounce during hoisting. IEEE Trans Control Syst Technol. 2014;22(3):1233–8. https://doi.org/10.1109/TCST.2013.2264288.10.1109/TCST.2013.2264288 ↗
17. Jin L, Liu H, Zheng X, Chen S. Exploring the impact of wind loads on tower crane operation. Math Prob Eng. 2020. https://doi.org/10.1155/2020/2807438.10.1155/2020/2807438 ↗
18. Tomczyk J, Cink J, Kosucki A. Dynamics of an overhead crane under a wind disturbance condition. Autom Constr. 2014;42:100–11. https://doi.org/10.1016/j.autcon.2014.02.013.10.1016/j.autcon.2014.02.013 ↗
19. Cekus D, Gnatowska R, Kwiatoń P. Impact of wind on the movement of the load carried by rotary crane. Appl Sci. 2019;9(18):3842. https://doi.org/10.3390/app9183842.10.3390/app9183842 ↗
20. Arena A, Casalotti A, Lacarbonara W, Cartmell MP. Dynamics of container cranes: three-dimensional modeling, full-scale experiments, and identification. Int J Mech Sci. 2015;93:8–21. https://doi.org/10.1016/j.ijmecsci.2014.11.024.10.1016/j.ijmecsci.2014.11.024 ↗
21. Schlott P, Geise A, Grabmair G, Fritzel T, Sawodny O. A crane-based five-axis manipulator for antenna tests. Control Eng Pract. 2019;85:149–62. https://doi.org/10.1016/j.conengprac.2019.01.014.10.1016/j.conengprac.2019.01.014 ↗
22. Kimiaghalam B, Homaifar A, Bikdash M, Hunt BR. Feedforward control law for a shipboard crane with Maryland rigging system. J Vib Control. 2002;8(2):159–88. https://doi.org/10.1177/107754602023816.10.1177/107754602023816 ↗
23. Lee J-W, Kim D-H, Park K-T. Fuzzy control of sway and skew of a spreader by using four auxiliary cables. In: Proceedings of International Conference on Control, Automation, and Systems. (2005).
24. Sato K, Ohishi K, Miyazaki T. Anti-sway crane control considering wind disturbance and container mass. Elect Eng Jpn. 2015;193(1):21–32. https://doi.org/10.1002/eej.22580.10.1002/eej.22580 ↗
25. Zheng X, et al. Ale formulation for dynamic modeling and simulation of cable-driven mechanisms considering stick-slip frictions. Mech Syst Signal Process. 2022;168: 108633. https://doi.org/10.1016/j.ymssp.2021.108633.10.1016/j.ymssp.2021.108633 ↗
26. Ho T, et al. A switched optimal control approach to reduce transferring time, energy consumption, and residual vibration of payload’s skew rotation in crane systems. Control Eng Pract. 2019;84:247–60. https://doi.org/10.1016/j.conengprac.2018.11.018.10.1016/j.conengprac.2018.11.018 ↗
27. Cibicik A, Myhre TA, Egeland O. Modeling and control of a bifilar crane payload. In 2018 Annual American Control Conference (ACC). (2018).10.23919/ACC.2018.8431375 ↗
28. Hindmarsh AC, et al. Sundials: suite of nonlinear and differential/algebraic equation solvers. ACM Trans Math Softw. 2005;31(3):363–96. https://doi.org/10.1145/1089014.1089020.10.1145/1089014.1089020 ↗
29. Rackauckas C. A comparison between differential equation solver suites in matlab. In: Julia R, Python C, Editors, Mathematica, Maple, and Fortran. The Winnower (2018). https://doi.org/10.15200/winn.153459.98975 .10.15200/winn.153459.98975 ↗
30. Sanderson C, Curtin R. Armadillo: a template-based c++ library for linear algebra. J Open Source Softw. 2016;1(2):26. https://doi.org/10.21105/joss.00026.10.21105/joss.00026 ↗
31. Hamano F. Derivative of rotation matrix-direct matrix derivation of well-known formula. In: Proceedings of the IEEE Green Energy and Systems Conference (IGESC 2013). (2013).
32. Shampine LF, Reichelt MW. The MATLAB ODE suite. SIAM J Sci Comput. 1997;18(1):1–22. https://doi.org/10.1137/S1064827594276424.10.1137/S1064827594276424 ↗
33. Verner JH. Numerically optimal Runge-Kutta pairs with interpolants. Num Algor. 2010;53(2):383–96. https://doi.org/10.1007/s11075-009-9290-3.10.1007/s11075-009-9290-3 ↗
34. Shampine LF, Reichelt MW, Kierzenka JA. Solving index-1 DAEs in MATLAB and Simulink. SIAM Rev. 1999;41(3):538–52. https://doi.org/10.1137/S003614459933425X.10.1137/S003614459933425X ↗
35. Shampine LF. Solving 0 = F(t, y(t), y’(t)) in MATLAB. J Numer Math. 2002;10(4):291–310. https://doi.org/10.1515/JNMA.2002.291.10.1515/JNMA.2002.291 ↗
36. Beléndez A, Pascual C, Méndez D, Beléndez T, Neipp C. Exact solution for the nonlinear pendulum. Revista brasileira de ensino de física. 2007;29(4):645–8.10.1590/S1806-11172007000400024 ↗
37. Lee C, Lee G. Feasibility of beam erection with a motorized hook-block. Autom Constr. 2014;41:25–32. https://doi.org/10.1016/j.autcon.2014.01.003.10.1016/j.autcon.2014.01.003 ↗
38. Takahashi H, et al. Sensor-less and time-optimal control for load-sway and boom-twist suppression using boom horizontal motion of large cranes. Autom Constr. 2022;134: 104086. https://doi.org/10.1016/j.autcon.2021.104086.10.1016/j.autcon.2021.104086 ↗