Experimental and numerical investigation on the multi-optimization of reinforcing the side members of the vehicle structure
Source abstract
Abstract
The aim of this study is to investigate the improvement in the strength of a top-hat profile hollow-section beam used in a vehicle structure by attaching different shapes of internal reinforcements. The base structure of the beam was first considered as a hat-shape structure which was jointed to a flat plate using spot-welds. Three types of sheet metal reinforcements were formed and attached inside the beam’s structure. Then, they were tested experimentally under low-velocity lateral impact. Also, a numerical simulation is being developed using LS-DYNA explicit code and validated using experimental data. Valid numerical configuration is used to conduct an optimization study on cross-sectional shape of the internal reinforcing component. Optimizations are carried out using single- and multi-objective methods based on Genetic Algorithm approach and the suggested optimum solutions are compared with experimental results. Moreover, to discuss the feasibility of applied reinforcements on side section of a vehicle’s body-in-white, a realistic side-pole crash test is simulated using a validated vehicle model and performance of improved chassis is compared with basic model and results are presented, discussed and commented upon.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Engineering and Vibrations Research · Cellular and Composite Structures · Vehicle Noise and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Pillai B, Rao CL, Kulkarni N, Pattanaik D. Study of automotive side sill/rocker by using carbon fibre reinforced polymer tubes. Int J Crashworthiness. 2018;23(6):660–679.10.1080/13588265.2017.1389625 ↗
2. McIvor IK, Anderson WJ, Bijak-Zochowski M. An experimental study of the large deformation of plastic hinges. Int J Solids Struct. 1977;13(1):53–61.10.1016/0020-7683(77)90090-7 ↗
3. Hofmeyer H. Cross-section crushing behaviour of hat-sections (part i: numerical modelling). Thin-Walled Struct. 2005;43(8):1143–54.10.1016/j.tws.2005.03.009 ↗
4. Mamalis A, Manolakos D, Baldoukas AK, Viegelahn GL. Deformation characteristics of crashworthy thin-walled steel tubes subjected to bending. Proc Inst Mech Eng Part C-J Mech Eng Sci. 1989;203:411–7.10.1243/PIME_PROC_1989_203_135_02 ↗
5. Maduliat S, Ngo T, Tran JP. Energy absorption of steel hollow tubes under bending. Struct Build. 2015;168(12):930–42.10.1680/jstbu.14.00109 ↗
6. Dlugosch M, Fritsch J, Lukaszewicz D, Hiermaier S. Experimental investigation and evaluation of numerical modeling approaches for hybrid-FRP-steel sections under impact loading for the application in automotive crash-structures. Compos Struct. 2017. https://doi.org/10.1016/j.compstruct.2017.04.077.10.1016/j.compstruct.2017.04.077 ↗
7. Vesenjak M, Duarte I, Baumeister J, Göhler H, Krstulović-Opara L, Ren Z. Bending performance evaluation of aluminium alloy tubes filled with different cellular metal cores. Compos Struct. 2020;234:111748.10.1016/j.compstruct.2019.111748 ↗
8. Zhang Y, Yan L, Zhang W, Su P, Han B, Guo S. Metallic tube-reinforced aluminum honeycombs: compressive and bending performances. Compos B Eng. 2019;171:192–203.10.1016/j.compositesb.2019.04.044 ↗
9. Baykasoğlu A, Baykasoğlu C, Cetin E. Multi-objective crashworthiness optimization of lattice structure filled thin-walled tubes. Thin-Walled Struct. 2020;149:106630.10.1016/j.tws.2020.106630 ↗
10. Alghamdi AAA. Collapsible impact energy absorbers: an overview. Thin-Walled Struct. 2001;39(2):189–213.10.1016/S0263-8231(00)00048-3 ↗
11. Chen G. Optimized design solutions for roof strength using advanced high strength steels. SAE Int J Mater Manuf. 2010;3:90–8.10.4271/2010-01-0214 ↗
12. Pan C-L, Yu W-W. Bending strength of hybrid cold-formed steel beams. Thin-Walled Struct. 2002;40(5):399–414.10.1016/S0263-8231(02)00004-6 ↗
13. Fyllingen Ø, Hopperstad OS, Langseth M. Simulations of a top-hat section subjected to axial crushing taking into account material and geometry variations. Int J Solids Struct. 2008;45(24):6205–19.10.1016/j.ijsolstr.2008.07.011 ↗
14. Zhang H, Sun G, Xiao Z, Li G, Li Q. Bending characteristics of top-hat structures through tailor rolled blank (TRB) process. Thin-Walled Struct. 2018;123:420–40.10.1016/j.tws.2017.10.032 ↗
15. Vignjevic R, Liang C, Hughes K, Brown JC, De Vuyst T, Djordjevic N, Campbell J. A numerical study on the influence of internal corrugated reinforcements on the biaxial bending collapse of thin-walled beams. Thin-Walled Struct. 2019;144:106277.10.1016/j.tws.2019.106277 ↗
16. Li Y, You Z. Open-section origami beams for energy absorption. Int J Mech Sci. 2019;157–158:741–57.10.1016/j.ijmecsci.2019.05.006 ↗
17. Du Z, Duan L, Cheng A, Xu Z, Zhang G. Theoretical prediction and crashworthiness optimization of thin-walled structures with single-box multi-cell section under three-point bending loading. Int J Mech Sci. 2019;157–158:703–14.10.1016/j.ijmecsci.2019.05.013 ↗
18. Duan L, Du Z, Jiang H, Xu W, Li Z. Theoretical prediction and crashworthiness optimization of top-hat thin-walled structures under transverse loading. Thin-Walled Struct. 2019;144:106261.10.1016/j.tws.2019.106261 ↗
19. Zhang X, Zhang H, Wang Z. Bending collapse of square tubes with variable thickness. Int J Mech Sci. 2016;106:107–16.10.1016/j.ijmecsci.2015.12.006 ↗
20. Zhang X, Zhang H, Ren W. Bending collapse of folded tubes. Int J Mech Sci. 2016;117:67–78.10.1016/j.ijmecsci.2016.07.016 ↗
21. Huang Z, Zhang X, Zhang H. Energy absorption and optimization design of multi-cell tubes subjected to lateral indentation. Thin-Walled Struct. 2018;131:179–91.10.1016/j.tws.2018.06.020 ↗
22. Huang Z, Zhang X. Three-point bending of thin-walled rectangular section tubes with indentation mode. Thin-Walled Struct. 2019;137:231–50.10.1016/j.tws.2019.01.015 ↗
23. Zahedan N, Ahmadi H, Atashafrooz S, Baghaeian M. Experimental and numerical investigation on bending strength of the vehicle bumper beam with internal stiffeners. Int J Crashworthiness. 2021;26(6):661–673.10.1080/13588265.2020.1767015 ↗
24. Shaw J, Kuriyama Y,Lambriks M. Achieving a lightweight and steel-Intensive body structure for alternative powertrains, SAE Technical Paper 2011-01-0425;2011. https://doi.org/10.4271/2011-01-0425.10.4271/2011-01-0425 ↗
25. Li W, Gu Y-Z, Han L-H, Zhao X-L, Wang R, Nassirnia M, Heidarpour A. Behaviour of ultra-high strength steel hollow tubes subjected to low velocity lateral impact: experiment and finite element analysis. Thin-Walled Struct. 2019;134:524–36.10.1016/j.tws.2018.10.026 ↗
26. Zhai H, Yao J, Zou J, Liu X, Wang Y. Deformation of small diameter aluminum alloy (AA6063T5) circular tubes subjected to lateral low-velocity impact. Thin-Walled Struct. 2020;154:106808.10.1016/j.tws.2020.106808 ↗
27. Wu Q, Zhi X, Li Q, Guo M. Experimental and numerical studies of GFRP-reinforced steel tube under low-velocity transverse impact. Int J Impact Eng. 2019;127:135–53.10.1016/j.ijimpeng.2019.01.010 ↗
28. Gui C, Bai J, Zuo W. Simplified crashworthiness method of automotive frame for conceptual design. Thin-Walled Struct. 2018;131:324–35.10.1016/j.tws.2018.07.005 ↗
29. Zahedan N, Ahmadi H, Liaghat G. Energy absorption study of a new reinforced top-hat section beam under flexural loading. Int J Crashworthiness. 2020. https://doi.org/10.1080/13588265.2020.1844434.10.1080/13588265.2020.1844434 ↗
30. Qi C, Sun Y, Hu H-T, Wang D-Z, Cao G-J, Yang S. On design of hybrid material double-hat thin-walled beams under lateral impact. Int J Mech Sci. 2016;118:21–35.10.1016/j.ijmecsci.2016.09.009 ↗
31. Qi C, Sun Y, Yang S. A comparative study on empty and foam-filled hybrid material double-hat beams under lateral impact. Thin-Walled Struct. 2018;129:327–41.10.1016/j.tws.2018.04.018 ↗
32. ASTM E8, E8M-16a. Standard test methods for tension testing of metallic materials. West Conshohocken, PA: ASTM International; 2016.
33. T. Malmberg, Aspects of similitude theory in solid mechanics, part 1: deformation behavior, Karlsruhe: FZKA, 1995.
34. Khalkhali A, Miandoabchi E. Experimental investigation into the bending energy absorption of hybrid aluminum/high strength and mild steel thin-walled sections joined by clinching. Proc Inst Mech Eng Part E J Process Mech Eng. 2021;235(2):452–62.10.1177/0954408920961195 ↗
35. Livermore Software Technology Corporation (LSTC) (2012) LS-DYNA Keyword User’s Manual, Version 971 R6.1.0, Vol. 1 and 2.
36. Hallquist JO. LS-DYNA keyword users’ manual, material models, vol. 2. Livermore Software Technology Corporation; 2012.
37. G. R. a. P. S. S. Cowper, Strain-hardening and strain-rate effects in the impact loading of cantilever beams, No. TR-C11–28. Brown Univ Providence Ri, 1957.
38. Marais S, Tait R, Cloete T, Nurick G. Material testing at high strain rate using the split Hopkinson pressure bar. Latin Am J Solids Struct. 2004;1(3):219–339.
39. Curve Fitting Toolbox : for Use with MATLAB® : User's Guide, Natick, MA: MathWorks, 2001.
40. Almeida JHS, Bittrich L, Nomura T, Spickenheuer A. Cross-section optimization of topologically-optimized variable-axial anisotropic composite structures. Composite Struct. 2019;225:111150.10.1016/j.compstruct.2019.111150 ↗
41. Deb K, Pratap A, Agarwal S, Meyarivan T. A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput. 2002;6(2):182–97.10.1109/4235.996017 ↗
42. Wang R-C, Liang T-F. Application of fuzzy multi-objective linear programming to aggregate production planning. Comput Ind Eng. 2004;46(1):17–41.10.1016/j.cie.2003.09.009 ↗
43. Roszkowska E. Multi-criteria decision making models by applying the TOPSIS method to crisp and interval data. Mult Criteria Decis Mak/Univ Econ Katowice. 2011;6:200–30.
44. Ross M, Patel D, Wenzel Th. Vehicle Design and the Physics of Traffic Safety. Physics Today. 2005; 59(1):49–54. https://doi.org/10.1063/1.2180177.10.1063/1.2180177 ↗
45. Marzougui D, Zink M, Zaouk A, Kan C, Bedewi N. Development and validation of a vehicle suspension finite element model for use in crash simulations. Int J Crashworthiness. 2004; 9(6):565–576. https://doi.org/10.1533/ijcr.2004.0311.10.1533/ijcr.2004.0311 ↗
46. Pintar FA, Maiman DJ, Yoganandan N. Injury patterns in side pole crashes. Annu Proc Assoc Adv Autom Med. 2007;51:419.