Analysis of the mechanism of fatigue failure of the Refill Friction Stir Spot Welded overlap joints
Source abstract
Abstract
Abstract The aim of this work is the experimental investigation of fatigue failure in Refill Friction Stir Spot Welding joints. The specimens for the fatigue analysis were made of 0.8-mm-thick and 1.6-mm-thick 7075-T6 aluminium alloy which is used to fabricate aircraft fuselages consisting of a plate skin with a stiffening stringer. The load capacity of joints was determined by tensile/shear tests. Fatigue tests were carried out on an Instron E10000 testing machine at room temperature. High-cycle fatigue tests were carried out under the following conditions: a limited number of cycles equal to 2 × 106, a frequency of 50 (Hz), and a coefficient of stress cycle R = 0.1. Microstructural features of fatigue fractures for different levels of variable load were examined using Scanning Electron Microscopy micrographs. The analysis of the fatigue fractures reveals that the Alclad layer at the bottom of the weld is a kind of structural notch and in this situation can be the location of the initiation of fatigue cracking. It was found that fracture mechanism depends on the value of load amplitude. Analysis of the SEM micrographs of fatigue fractures shown that the thermo-mechanically affected zone and heat affected zone are sources of fatigue failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.