Intelligent prediction methods for N–M interaction of CFST under eccentric compression
Source abstract
Abstract
Machine learning (ML), as a promising artificial intelligence method, gradually begins to be applied in predicting the behavior of structural members and demonstrates its superior capability in capturing the nonlinear data laws between various structural parameters and the targeted capacity. For concrete-filled steel tube (CFST) under eccentric compression, the nonlinear material confinement and the unsymmetrical loading make the application of ML methods both challenging and appealing. In this study, a comprehensive literature review is conducted to gather data from 92 reported test programs, and an experimental database consisting of 899 eccentrically loaded circular CFST samples is established. Through structural behaviors and correlation analysis of the data, input parameters for the ML models are rationally identified. Prediction models are developed using seven single ML algorithms, two ensemble ML algorithms and two reference regression methods, with their predictions compared and explained by the shapely additive explanation (SHAP) approach. Based on Monte Carlo simulation, the uncertainty quantification of predicted capacities is conducted considering four degrees of randomness. The results reveal that extreme gradient boosting (XGBoost) yields the best prediction performance, providing less than 5% prediction errors for more than 58% samples. Compared with existing capacity calculation methods for CFST under eccentric compression in design standards, the established ML models exhibit higher accuracies and wider applicable ranges.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Jo T. Machine learning foundations: Supervised, unsupervised, and advanced learning. Springer; 2021.10.1007/978-3-030-65900-4 ↗
2. Thai HT. Machine learning for structural engineering: a state-of-the-art review. Structures. 2022;38:448–91.10.1016/j.istruc.2022.02.003 ↗
3. Abdalla A, Mohammed AS. Hybrid MARS-, MEP-, and ANN-based prediction for modeling the compressive strength of cement mortar with various sand size and clay mineral metakaolin content, archives of civil and mechanical. Engineering. 2022;22:194.
4. Zhou XG, Hou C, Peng JH, et al. Structural mechanism-based intelligent capacity prediction methods for concrete-encased CFST columns. J Constr Steel Res. 2023;202:107769.10.1016/j.jcsr.2022.107769 ↗
5. Nguyen MST, Kim SE. A hybrid machine learning approach in prediction and uncertainty quantification of ultimate compressive strength of RCFST columns. Constr Build Mater. 2021;302:124208.10.1016/j.conbuildmat.2021.124208 ↗
6. Lu XZ, Liao WJ, Zhang Y, et al. Intelligent structural design of shear wall residence using physics-enhanced generative adversarial networks. Earthquake Eng Struct Dyn. 2022;51(7):1657–76.10.1002/eqe.3632 ↗
7. Han LH. Concrete filled steel tubular structures-theory and practice. 3rd ed. Beijing, China: Science Press; 2016.
8. Eurocode 4, 2004 Design of composite steel and concrete structures-Part 1.1: General rules and rules for buildings (EC 4–2004), European Committee for Standardization: British Standards Institution, London, UK.
9. AISC 360, Specification for Structural Steel Buildings (AISC 360–16), American Institute of Steel Construction, Chicago, USA, 2016.
10. AS/NZS 2327, Composite structures-Composite steel-concrete construction in buildings (AS/NZS 2327–2017), Standards Australia/New Zealand Committee, Sydney/Wellington, Australia/New Zealand, 2017.
11. GB/T 51446, Technical standard for concrete-filled steel tubular hybrid structures (GB/T 51446–2021), Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, China, 2021.
12. GB 50936, Technical code for concrete filled steel tubular structures (GB 50936–2014), Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, China, 2014.
13. Asteris PG, Lemonis ME, Le TT, et al. Evaluation of the ultimate eccentric load of rectangular CFSTs using advanced neural network modeling. Eng Struct. 2021;248:113297.10.1016/j.engstruct.2021.113297 ↗
14. Ahmadi M, Naderpour H, Kheyroddin A. Utilization of artificial neural networks to prediction of the capacity of CCFT short columns subject to short term axial load, Archives of Civil and Mechanical. Engineering. 2014;14:510–7.
15. Degtyarev VV, Thai HT. Design of concrete-filled steel tubular columns using data-driven methods. J Constr Steel Res. 2023;200:107653.10.1016/j.jcsr.2022.107653 ↗
16. Hou C, Zhou XG. Strength prediction of circular CFST columns through advanced machine learning methods. J Build Eng. 2022;51:104289.10.1016/j.jobe.2022.104289 ↗
17. Bardhan A, Biswas R, Kardani N, et al. A novel integrated approach of augmented grey wolf optimizer and ANN for estimating axial load carrying-capacity of concrete-filled steel tube columns. Constr Build Mater. 2022;337:127454.10.1016/j.conbuildmat.2022.127454 ↗
18. Zarringol M, Thai HT, Thai S, et al. Application of ANN to the design of CFST columns. Structures. 2020;28:2203–20.10.1016/j.istruc.2020.10.048 ↗
19. Lee S, Vo TP, Thai HT, et al. Strength prediction of concrete-filled steel tubular columns using categorical gradient boosting algorithm. Eng Struct. 2021;238:112109.10.1016/j.engstruct.2021.112109 ↗
20. Naser MZ, Thai S, Thai HT. Evaluating structural response of concrete-filled steel tubular columns through machine learning. J Build Eng. 2021;34:101888.10.1016/j.jobe.2020.101888 ↗
21. Nguyen MST, Trinh MC, Kim SE. Uncertainty quantification of ultimate compressive strength of CCFST columns using hybrid machine learning model. Eng Comp. 2022;38:2719–38.10.1007/s00366-021-01339-1 ↗
22. Zhou XG, Hou C, Feng WQ. Optimized data-driven machine learning models for axial strength prediction of rectangular CFST columns. Structures. 2023;47:760–80.10.1016/j.istruc.2022.11.030 ↗
23. Metropolis N, Ulam S. The monte Carlo method. J Am Stat Assoc. 1949;44(247):335–41.10.1080/01621459.1949.10483310 ↗
24. Muralidhar K. Monte Carlo simulation. Encyclop Informat Syst. 2003;3:193–201.
25. Prion HGL, Boehme J. Beam-column behaviour of steel tubes filled with high strength concrete. Can J Civ Eng. 1994;21(2):207–18.10.1139/l94-024 ↗
26. Zhang L, Wang XG, Han YC. Experiment analysis of concrete filled circular steel tubular columns under eccentric load. J Rail Sci Eng. 2010;7(5):50–3.
27. Chen ZP, Li QL, Zhang XG, et al. Mechanical behavior and bearing capacity calculation of recycled aggregate concrete-filled circular steel tube columns under eccentric loading. Chin Civil Eng J. 2012;45(10):72–80.
28. Zhao XY, Wu B, Wang L. Structural response of thin-walled circular steel tubular columns filled with demolished concrete lumps and fresh concrete. Constr Build Mater. 2016;129:216–42.10.1016/j.conbuildmat.2016.10.099 ↗
29. Chen ZP, Jing CG, Xue JY, et al. Study of mechanical behavior of recycled aggregate concrete filled circular steel tube columns under eccentric loading after high temperature. Ind Const. 2014;44(11):19–24.
30. Gopal SR, Manoharan PD. Experimental behaviour of eccentrically loaded slender circular hollow steel columns in-filled with fibre reinforced concrete. J Constr Steel Res. 2006;62(5):513–20.10.1016/j.jcsr.2005.09.004 ↗
31. O’Shea MD, Bridge RQ. Design of circular thin-walled concrete filled steel tubes. J Struct Eng. 2000;126(11):1295–303.10.1061/(ASCE)0733-9445(2000)126:11(1295) ↗
32. Zeghiche J, Chaoui K. An experimental behaviour of concrete-filled steel tubular columns. J Constr Steel Res. 2005;61(1):53–66.10.1016/j.jcsr.2004.06.006 ↗
33. Xue JQ, Briseghella B, Chen BC. Effects of debonding on circular CFST stub columns. J Constr Steel Res. 2012;69(1):64–76.10.1016/j.jcsr.2011.08.002 ↗
34. Kilpatrick AE, Rangan BV. Tests on high-strength concrete-filled steel tubular columns. ACI Struct J. 1999;96(2):268–74.
35. Ibañez C, Romero ML, Espinós A, et al. Ultra-high strength concrete on eccentrically loaded slender circular concrete-filled dual steel columns. Structures. 2017;12:64–74.10.1016/j.istruc.2017.07.005 ↗
36. Chang X, Huang CK, Chen YJ. Mechanical performance of eccentrically loaded pre-stressing concrete filled circular steel tube columns by means of expansive cement. Eng Struct. 2009;31(11):2588–97.10.1016/j.engstruct.2009.06.007 ↗
37. Liu WL, Liu Z, Liu PC. Experimental study on the mechanical properties of concrete-filled circular steel tube short columns under compression. Industrial Construction. 2008;38(8):78–82.
38. Liu LB, Tan KF, Yu HL. Mechanical properties of high-strength concrete filled steel tubular columns part 2: slender columns and eccentrically loaded columns. J South Univer Sci Technol. 2005;20(4):1–6.
39. Chen BC, Wang LY, Ou ZJ, et al. Experimental study of stress-strain relation of eccentrically-loaded concrete-filled steel tubular columns. Eng Mech. 2003;20(6):154–9.
40. Zhao XL. Experimental behavior and finite analysis research on CFST. Nanning: Guangxi University; 2013.
41. Zhang XQ, Zhong ST, Yan SZ, et al. Experimental study about the effect of initial stress on bearing capacity of concrete filled steel tubular members under eccentric compression. J Harbin Univer Civil Eng Archit. 1997;30(1):50–6.
42. Xiong MX, Xiong DX, Liew JYR. Behaviour of steel tubular members infilled with ultra high strength concrete. J Constr Steel Res. 2017;138:168–83.10.1016/j.jcsr.2017.07.001 ↗
43. Han LH, Ye Y, Liao FY. Effects of core concrete initial imperfection on performance of eccentrically loaded CFST columns. J Struct Eng. 2016;142(12):04016132.10.1061/(ASCE)ST.1943-541X.0001604 ↗
44. Xiang XY. Research on the axial and eccentric behavior of self-compacting recycled aggregate concrete filled steel tube stub columns. Chengdu: Southwest Jiaotong University; 2017.
45. Huang H, Zhou L, Chen MC, et al. Experimental study of recycled concrete filled circular steel tube column subjected to eccentric compression after acid rain corrosion. J Exper Mech. 2018;33(2):290–8.
46. Yu ZW, Ding FX. Mechanical behavior of concrete filled circular steel tubular columns under eccentric compression. China J Highway Transport. 2008;21(1):40–6.
47. Fang YP. Research of mechanical Behavior on eccentric compressive short columns and axial compressive long columns with recycled aggregate concrete filled circular steel tube. Guangzhou: Guangdong University of Technology; 2015.
48. Chen J, Wang YY, Roeder CW, et al. Behavior of normal-strength recycled aggregate concrete filled steel tubes under combined loading. Eng Struct. 2017;130:23–40.10.1016/j.engstruct.2016.09.046 ↗
49. Yang YF, Han LH. Experimental behaviour of recycled aggregate concrete filled steel tubular columns. J Constr Steel Res. 2006;62(12):1310–24.10.1016/j.jcsr.2006.02.010 ↗
50. Shen QH, Wang JF, Xu QY, et al. Performance and design of partially CFRP-jacketed circular CFT column under eccentric compression. J Constr Steel Res. 2020;166:105925.10.1016/j.jcsr.2019.105925 ↗
51. Albero V, Ibañez C, Piquer A, et al. Behaviour of slender concrete-filled dual steel tubular columns subjected to eccentric loads. J Constr Steel Res. 2021;176:106365.10.1016/j.jcsr.2020.106365 ↗
52. Zhang R, Chen SM, Gu P, et al. Structural behavior of UHPC filled steel tubular columns under eccentric loading. Thin-Walled Struct. 2020;156:106959.10.1016/j.tws.2020.106959 ↗
53. Xue JQ, Chen BC, Briseghella B. Experiment on debonding in concrete-filled steel single tube columns subjected to eccentrically loading. J Build Struct. 2009;30(S2):237–41.
54. Hu R, Du XX, Cai ZY, et al. Experimental study of eccentric bearing capacity of steel tubes reinforced by infilling concrete under load. Ind Construct. 2017;47(2):7–12.
55. Yan JB, Chen AZ, Zhu JS. Tests and analysis on circular UHPFRC-filled steel tubular stub columns under eccentric compression. J Constr Steel Res. 2021;178:106501.10.1016/j.jcsr.2020.106501 ↗
56. Tu CL, Shi YJ, Liu D, et al. Behavior and general design method of concrete-filled high-strength steel tube (CFHST) columns. Eng Struct. 2021;243:112506.10.1016/j.engstruct.2021.112506 ↗
57. Liu XP, Tang S, Tang CH, et al. Experimental study on eccentric compressive behavior of concrete filled hollow steel tubes. Railway Eng. 2011;2:117–21.
58. Guo C, Lu ZR. Air void and cap gap composite defects of concrete-filled steel-tube arch bridge transverse brace. J Perform Constr Facil. 2020;34(4):04020073.10.1061/(ASCE)CF.1943-5509.0001479 ↗
59. Liang KF. Influence of void on mechanical behavior of concrete filled steel tubular. Changsha: Hunan University; 2008.
60. Gunawardena Y, Aslani F. Behaviour and design of concrete-filled mild-steel spiral welded tube short columns under eccentric axial compression loading. J Constr Steel Res. 2018;151:146–73.10.1016/j.jcsr.2018.09.018 ↗
61. Kavoossi HR. Ultimate load capacity of circular hollow sections filled with higher strength concrete. Wollongong: University of Wollongong; 1993.
62. Johansson M, Gylltoft K. Structural behavior of slender circular steel-concrete composite columns under various means of load application. Steel Compos Struct. 2001;1(4):393–410.10.12989/scs.2001.1.4.393 ↗
63. Ma SF, Zhao JH, Wei XY. Theory and test investigation of bearing capacity of concrete filled steel tube under eccentric compression. Ind Construct. 2001;36(10):79–80.
64. Zhang WD, Wang ZB, Ding HJ. Experimental study on eccentric compression behavior of recycled concrete filled steel tubular short columns. J Daqing Petrol Inst. 2011;35(5):88–91.
65. Thayalan P, Aly T, Patnaikuni I. Behaviour of concrete-filled steel tubes under static and variable repeated loading. J Constr Steel Res. 2009;65(4):900–8.10.1016/j.jcsr.2008.07.023 ↗
66. Xue Y. Study on static behavior of self compacting high strength concrete filled steel tubular compression bending members. Shenyang: Shenyang Jianzhu University; 2011.
67. Zhu JQ. Study on N–M curve of circular UHPC filled steel tubular beam-columns. Fuzhou: Fuzhou University; 2018.
68. Yao LY. Research on behavior of eccentrically loaded stub column and axially compressed slender column with RPC-filled circular steel tube. Fuzhou: Fuzhou University; 2004.
69. Zeng JX. Researches on behavior of eccentrically loaded slender column of circular steel tube RPC. Fuzhou: Fuzhou University; 2005.
70. Liew JYR, Xiong MX, Xiong DX. Design of concrete filled tubular beam-columns with high strength steel and concrete. Structures. 2016;8:213–26.10.1016/j.istruc.2016.05.005 ↗
71. Han LH. The influence of concrete compaction on the strength of concrete filled steel tubes. Adv Struct Eng. 2000;3(2):131–7.10.1260/1369433001502076 ↗
72. Wang YY. Experimental study on the mechanical properties of self-compacting recycled concrete-filled thin-walled steel tube columns. Jinzhou: Liaoning University of Technology; 2013.
73. Zhu Z. Research on behavior of lightweight aggregate concrete filled thin-walled steel tube columns under compression. Nanning: Guangxi University; 2019.
74. Ling L. Study on damage and failure process of concrete filled steel tubes. Shenyang: Northeastern University; 2008.
75. Elzien A, Ji BH, Fu ZQ, et al. The behavior of lightweight aggregate concrete filled steel tube columns under eccentric loading. Steel Compos Struct. 2011;11(6):469–88.10.12989/scs.2011.11.6.469 ↗
76. Liu WT, Gao HG, Li JR, et al. Influence of confinement index and eccentricity ratio on the mechanical properties of high strength concrete-filled thin steel tubular columns. Univer Sci Technol Liaon. 2018;41(4):308–13.
77. Tang S. Study on the mechanical properties of separation concrete filled steel tubular members. Guangzhou: Guangzhou University; 2011.
78. Wu LX, Zhou JZ, Leng Y, et al. Experimental study on eccentrically compressed concrete filled circular CFRP steel tubular columns. J Hubei Univer Technol. 2021;36(5):86–90.
79. Yan YH, Li S, Lu YY, et al. CFST columns strengthened with CFRP textile grid-reinforced engineered cementitious composites under eccentric compression. Compos Struct. 2022;289:115498.10.1016/j.compstruct.2022.115498 ↗
80. Gopal SR, Manoharan PD. Tests on fiber reinforced concrete filled steel tubular columns. Steel Compos Struct. 2004;4(1):37–48.10.12989/scs.2004.4.1.037 ↗
81. Chen YJ, Li Y, Yan WM, et al. Bearing capacity test of large size concrete filled steel tubular column. China J High Transport. 2011;24(4):33–8.
82. Tam VWY, Xiao JZ, Liu S, et al. Behaviors of recycled aggregate concrete-filled steel tubular columns under eccentric loadings. Front Struct Civ Eng. 2019;13(3):628–39.10.1007/s11709-018-0501-7 ↗
83. Wu LW, Li XH, Su YP, et al. Experimental study on compressive behavior of precast concrete filled steel tubular columns. J Build Struct. 2021;40(S1):207–13.
84. Xu L. Experimental study and theoretical analysis on static performance of the steel slag concrete-filled circular steel tube. Maanshan: Anhui University of Technology; 2015.
85. Ren QX, Han LH, Hou C, et al. Experimental behaviour of tapered CFST columns under combined compression and bending. J Constr Steel Res. 2017;128:39–52.10.1016/j.jcsr.2016.08.005 ↗
86. Gunawardena Y, Aslani F, Uy B. Behaviour and design of concrete-filled mild-steel spiral welded tube long columns under eccentric axial compression loading. J Constr Steel Res. 2019;159:341–63.10.1016/j.jcsr.2019.04.045 ↗
87. Matsui C, Tsuda K, Ozaki I, et al. Strength of slender concrete filled steel tubular columns. J Struct Const Eng (Transactions of AIJ). 1997;494:137–44.10.3130/aijs.62.137_1 ↗
88. He YB, Xiao AL, Guo J, et al. Experimental study on behavior of eccentrically loaded steel-reinforced self-compacting high-strength concrete filled steel tubular columns. J Build Struct. 2010;31(4):102–9.
89. Yu F, Xu PC, Fang Y, et al. Stiffness analysis of recycled self-compacting concrete-filled circular steel tubular columns under eccentric compression. Adv Civil Eng. 2019;2019:1–15.
90. Gopal RS. An experimental study on FRC infilled steel tubular columns under eccentric loading. KSCE J Civ Eng. 2017;21(3):923–7.10.1007/s12205-016-0851-4 ↗
91. Tao Z, Han LH. Behaviour of fire-exposed concrete-filled steel tubular beam columns repaired with CFRP wraps. Thin-walled Struct. 2007;45(1):63–76.10.1016/j.tws.2006.11.004 ↗
92. Dong MH, Elchalakani M, Karrech A, et al. Circular steel tubes filled with rubberised concrete under combined loading. J Constr Steel Res. 2019;162:105613.10.1016/j.jcsr.2019.05.003 ↗
93. Mujdeci A, Bompa D, Elghazouli A. Structural performance of composite steel rubberised concrete members under combined loading conditions. Papers. 2021;4:641–7.10.1002/cepa.1343 ↗
94. Fang H, Visintin P. Structural performance of geopolymer-concrete-filled steel tube members subjected to compression and bending. J Constr Steel Res. 2022;188:107026.10.1016/j.jcsr.2021.107026 ↗
95. Zhang R. Study on the effect of local corrosion on the mechanical properties of concrete-filled circular steel tube compression-bending members. Nanchang: East China Jiaotong University; 2021.
96. Ci JC, Ahmed M, Jia H, et al. Testing and strength prediction of eccentrically-loaded circular concrete-filled double steel tubular stub-columns. J Constr Steel Res. 2021;186:106881.10.1016/j.jcsr.2021.106881 ↗
97. Zhang YC. Local corrosion effect on mechanical behavior of concrete-filled steel tubes. Harbin: Harbin Institute of Technology; 2021.
98. Ren ZD, Wang ZY, Kong C, et al. Study on bearing mechanism of eccentric long column of concrete-filled steel tube arch frame in highway tunnel. Chinese J Underg Space Eng. 2021;17(6):1809–20.
99. Rangan BV, Joyce M. Strength of eccentrically loaded slender steel tubular columns filled with high-strength concrete. ACI Struct J. 1992;89(6):676–81.
100. Han LH, Yao GH. Experimental behaviour of thin-walled hollow structural steel (HSS) columns filled with self-consolidating concrete (SCC). Thin-Walled Structures. 2004;42(9):1357–77.10.1016/j.tws.2004.03.016 ↗