Tailoring the mechanical properties of hypereutectic in situ Al–Mg2Si composites via hybrid TiB2 reinforcement and hot extrusion
Source abstract
Abstract
Microstructure and mechanical properties of Al–15Mg2Si–xTiB2 hybrid composites in the as-cast and wrought conditions were studied. TiB2 addition led to a significant refinement and modification of primary Mg2Si particles (up to 3 wt% TiB2 addition) via the heterogeneous nucleation mechanism, which improved the as-cast tensile properties. Further additions led to the appearance of coarse needle-shaped Al3Ti particles with the consequent deterioration of tensile properties. Hot deformation by extrusion process and elevated-temperature exposure resulted in the fragmentation, dispersion, and spheroidization of pseudo-eutectic Mg2Si constituents, which led to a significant enhancement of tensile properties. The ultimate tensile strength of the extruded Al–15Mg2Si–3TiB2 composite was 285 MPa with the total elongation of ~ 8%, which revealed a good strength–ductility balance. The corresponding value for the as-cast Al–15Mg2Si composite was only 198 MPa%. Accordingly, this study revealed that the presence of optimum amount of TiB2 combined with high-temperature thermomechanical processing could remarkably improve the mechanical properties of the hypereutectic Al–Mg–Si composites in terms of strength–ductility balance, quality index, and tensile toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Sharma A, Gupta G, Paul J. A comprehensive review on the dispersion and survivability issues of carbon nanotubes in Al/CNT nanocomposites fabricated via friction stir processing. Carbon Lett. 2021;31:339–70.10.1007/s42823-020-00207-0 ↗
2. Rajak DK, Pagar DD, Kumar R, Pruncu CI. Recent progress of reinforcement materials: a comprehensive overview of composite materials. J Market Res. 2019;8:6354–74.
3. Ayar VS, Sutaria MP. Comparative evaluation of ex situ and in situ method of fabricating aluminum/TiB2 composites. Int J Metalcasting. 2021. https://doi.org/10.1007/s40962-020-00539-7.10.1007/s40962-020-00539-7 ↗
4. Pramod SL, Bakshi SR, Murty BS. Aluminum-based cast in situ composites: a review. J Mater Eng Perform. 2015;24:2185–207.10.1007/s11665-015-1424-2 ↗
5. Sharma A, Paul J. A review on the fabrication of in situ metal matrix composite during friction stir welding. Mater Sci Forum. 2020;978:191–201.10.4028/www.scientific.net/MSF.978.191 ↗
6. Sharma DK, Mahant D, Upadhyay G. Manufacturing of metal matrix composites: a state of review. Mater Today. 2020;26:506–19.
7. Sharifzadeh M, Shaeri MH, Taghiabadi R, Mozaffari F, Ebrahimi M. Investigating the combination effect of warm extrusion and multi-directional forging on microstructure and mechanical properties of Al–Mg2Si composites. Arch Civil Mech Eng. 2020;20:33.10.1007/s43452-020-00020-6 ↗
8. Wang D, Zhang H, Han X, Shao B, Li L, Cui J. The analysis of strontium modification on microstructure and mechanical properties of Al-25% Mg2Si in situ composite. J Mater Eng Perform. 2017;26:4415–23.10.1007/s11665-017-2889-y ↗
9. Zamani R, Mirzadeh H, Emamy M. Evaluating the effect of hot-rolling reduction on the mechanical properties of in situ formed aluminum–magnesium–silicon (Al–Mg2Si) Composites. Adv Eng Mater. 2019;21:1900609.10.1002/adem.201900609 ↗
10. Qin QD, Zhao YG, Zhou W, Cong PJ. Effect of phosphorus on microstructure and growth manner of primary Mg2Si crystal in Mg2Si/Al composite. Mater Sci Eng A. 2007;447:186–91.10.1016/j.msea.2006.10.076 ↗
11. Zamani R, Mirzadeh H, Emamy M. Mechanical properties of a hot deformed Al–Mg2Si in-situ composite. Mater Sci Eng A. 2018;726:10–7.10.1016/j.msea.2018.04.064 ↗
12. Zhou MY, Ren LB, Fan LL, Zhang YWX, Lu TH, Quan GF, Gupta M. Progress in research on hybrid metal matrix composites. J Alloys Compd. 2020;838:155274.10.1016/j.jallcom.2020.155274 ↗
13. Nie J, Wang F, Li YS, Liu YF, Liu XF, Zhao YH. Microstructure and mechanical properties of Al-TiB2/TiC in situ composites improved via hot rolling. Trans Nonferrous Metals Soc China. 2017;27:2548–54.10.1016/S1003-6326(17)60283-8 ↗
14. Rajan BM, Ramabalan S, Dinaharan I, Vijay SJ. Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites. Arch Civil Mech Eng. 2014;14:72–9.10.1016/j.acme.2013.05.005 ↗
15. Chen F, Chen Z, Mao F, Wang T, Cao Z. TiB2 reinforced aluminum based in situ composites fabricated by stir casting. Mater Sci Eng A. 2015;625:357–68.10.1016/j.msea.2014.12.033 ↗
16. Du R, Yuan D, Li F, Zhang D, Wu S, Lü S. Effect of in-situ TiB2 particles on microstructure and mechanical properties of Mg2Si/Al composites. J Alloy Compd. 2019;776:536–42.10.1016/j.jallcom.2018.10.301 ↗
17. Ma SM, Zhang P, Ji G, Chen Z, Sun GA, Zhong SY, Ji V, Wang HW. Microstructure and mechanical properties of friction stir processed Al–Mg–Si alloys dispersion-strengthened by nanosized TiB2 particles. J Alloy Compd. 2014;616:128–36.10.1016/j.jallcom.2014.07.092 ↗
18. Nandam SH, Murty BS, Sankaran S. Influence of TiB2 addition on the precipitation kinetics in Al-7Si-0.3Mg in situ TiB2 composites. Metall Mater Trans A. 2015;46:2844–9.10.1007/s11661-015-2927-z ↗
19. Taghiabadi R, Mahmoudi M, Emamy M, Campbell J. Effect of casting techniques on tensile properties of cast aluminium alloy (Al–Si–Mg) and TiB2 containing metal matrix composite. Mater Sci Technol. 2003;19:497–502.10.1179/026708303225010821 ↗
20. Wang P, Gammer C, Brenne F, Niendorf T, Eckert J, Scudino S. A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: microstructure, heat treatment and mechanical properties. Compos Part B. 2018;147:162–8.10.1016/j.compositesb.2018.04.026 ↗
21. Xie X, Chen C, Chen Z, Wang W, Yin S, Ji G, Liao H. Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/AlSi10Mg composite produced by cold spray additive manufacturing. Compos Part B. 2020;202:108404.10.1016/j.compositesb.2020.108404 ↗
22. Mehranpour MS, Heydarinia A, Emamy M, Mirzadeh H, Koushki A, Razi R. Enhanced mechanical properties of AZ91 magnesium alloy by inoculation and hot deformation. Mater Sci Eng A. 2021;802:140667.10.1016/j.msea.2020.140667 ↗
23. Li C, Liu X, Zhang G. Heterogeneous nucleating role of TiB2 or AlP/TiB2 coupled compounds on primary Mg2Si in Al–Mg–Si alloys. Mater Sci Eng, A. 2008;497:432–7.10.1016/j.msea.2008.07.034 ↗
24. Turnbull D, Vonnegut B. Nucleation catalysis. Ind Eng Chem. 1952;44:1292–8.10.1021/ie50510a031 ↗
25. Mirzadeh H. High strain rate superplasticity via friction stir processing (FSP): a review. Mater Sci Eng A. 2021;819:141499.10.1016/j.msea.2021.141499 ↗
26. Khorasani F, Emamy M, Malekan M, Mirzadeh H, Pourbahari B, Krajnák T, Minárik P. Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg-Al2Ca-Mg2Ca in-situ composite by hot extrusion. Mater Charact. 2019;147:155–64.10.1016/j.matchar.2018.10.018 ↗
27. Hesami L, Taghiabadi R, Ghoncheh MH. Study on the modification effect of copper on Al–15Mg2Si composite. Mater Chem Phys. 2022;276:125323.10.1016/j.matchemphys.2021.125323 ↗
28. Tiryakioglu M, Campbell J, Alexopoulos ND. Quality indices for aluminum alloy castings: a critical review. Metall Mater Trans B. 2009;40:802–11.10.1007/s11663-009-9304-5 ↗
29. Barri N, Salasel AR, Abbasi A, Mirzadeh H, Emamy M, Malekan M. A new intermetallic phase formation in Mg-Si-Ni magnesium-based in-situ formed alloys. Vacuum. 2019;164:349–54.10.1016/j.vacuum.2019.03.050 ↗
30. Afsharnaderi A, Lotfpour M, Mirzadeh H, Emamy M, Malekan M. Enhanced mechanical properties of as-cast AZ91 magnesium alloy by combined RE-Sr addition and hot extrusion. Mater Sci Eng A. 2020;792:139817.10.1016/j.msea.2020.139817 ↗
31. Pourbahari B, Mirzadeh H, Emamy M. Elucidating the effect of intermetallic compounds on the behavior of Mg-Gd-Al-Zn magnesium alloys at elevated temperatures. J Mater Res. 2017;32:4186–95.10.1557/jmr.2017.415 ↗
32. Marjani O, Emamy M, Mirzadeh H. Mechanical behavior of as-cast and extruded Mg-Si-Ni-Ca magnesium alloys. J Mater Eng Perform. 2020;29:7728–35.10.1007/s11665-020-05229-3 ↗