Damage evolution in AA2124/SiC metal matrix composites under tension with consecutive unloadings
Source abstract
Abstract
Abstract Nonlinear properties of metal matrix composites (MMCs) are studied. The research combines results of loading–unloading tensile tests, microstructural observations and numerical predictions by means of micromechanical mean-field models. AA2124/SiC metal matrix composites with SiC particles, produced by the Aerospace Metal Composites Ltd. (AMC) are investigated. The aluminum matrix is reinforced with 17% and 25% of SiC particles. The best conditions to evaluate the current elastic stiffness modulus have been assessed. Tensile tests were carried out with consecutive unloading loops to obtain actual tensile modulus and study degradation of elastic properties of the composites. The microstructure examination by scanning electron microscopy (SEM) showed a variety of phenomena occurring during composite deformation and possible sources of elastic stiffness reduction and damage evolution have been indicated. Two micromechanical approaches, the incremental Mori–Tanaka (MT) and self-consistent (SC) schemes, are applied to estimate effective properties of the composites. The standard formulations are extended to take into account elasto-plasticity and damage development in the metal phase. The method of direct linearization performed for the tangent or secant stiffness moduli is formulated. Predictions of both approaches are compared with experimental results of tensile tests in the elastic–plastic regime. The question is addressed how to perform the micromechanical modelling if the actual stress–strain curve of metal matrix is unknown.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Composite Material Mechanics · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Chawla N, Shen Y-L. Mechanical behavior of particle reinforced metal matrix composites. Adv Eng Mater. 2001;3(6):357–70. https://doi.org/10.1002/1527-2648(200106)3:6<357:AID-ADEM357>3.0.CO;2-I.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. Das DK, Mishra PCh, Singh S, Thakur RK. Properties of ceramic-reinforced aluminium matrix composites—a review. Int J Mech Mater Eng. 2014;1:12. https://doi.org/10.1186/s40712-014-0012-9.10.1186/s40712-014-0012-9 ↗
3. Kouzeli M, Weber L, San Marchi C, Mortensen A. Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminium. Acta Mater. 2001;49(3):497–505. https://doi.org/10.1016/S1359-6454(00)00334-7.10.1016/S1359-6454(00)00334-7 ↗
4. Kouzeli M, Weber L, San Marchi C, Mortensen A. Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥ 40 vol. pct alumina particles. Acta Mater. 2001;49(18):3699–709. https://doi.org/10.1016/S1359-6454(01)00279-8.10.1016/S1359-6454(01)00279-8 ↗
5. Maire E, Verdu C, Lormand G, Fougeres R. Study of the damage mechanisms in an OSPREY™ A1 alloy-SiCp composite by scanning electron microscope in situ tensile tests. Mater Sci Eng A. 1995;196:135–44.10.1016/0921-5093(94)09713-5 ↗
6. Doel TJA, Bowen P. Tensile properties of particulate-reinforced metal matrix composites. Compos A. 1996;27(8):655–65. https://doi.org/10.1016/1359-835X(96)00040-1.10.1016/1359-835X(96)00040-1 ↗
7. Srivatsan T, Mattingly J. Influence of heat treatment on the tensile properties and fracture behaviour of an aluminium alloy-ceramic particle composite. J Mater Sci. 1993;28(3):611–20. https://doi.org/10.1007/BF01151235.10.1007/BF01151235 ↗
8. Rutecka A, Kowalewski ZL, Makowska K, Pietrzak K, Dietrich L. Fatigue damage of Al/SiC composites—macroscopic and microscopic analysis. Arch Metall Mater. 2015;60(1):101–5. https://doi.org/10.1515/amm-2015-0016.10.1515/amm-2015-0016 ↗
9. Rutecka A, Kowalewski ZL, Pietrzak K, Dietrich L, Makowska K, Woźniak J, Kostecki M, Bochniak W, Olszyna A. Damage development of Al/SiC metal matrix composite under fatigue, creep and monotonic loading conditions. Procedia Eng. 2011;10:1420–5. https://doi.org/10.1016/j.proeng.2011.04.236.10.1016/j.proeng.2011.04.236 ↗
10. Gatea S, Ou H, McCartney G. Deformation and fracture characteristics of Al6092/SiC/17.5p metal matrix composite sheets due to heat treatments. Mater. Charact. 2018;142:365–76. https://doi.org/10.1016/j.matchar.2018.05.050.10.1016/j.matchar.2018.05.050 ↗
11. Shang JK, Ritchie RO. Crack bridging by uncracked ligaments during crack growth in SiC-reinforced aluminum-alloy composites. Metall Trans. 1989;20(5):899–908. https://doi.org/10.1007/BF02651656.10.1007/BF02651656 ↗
12. Qin C, Wang L, Jiang W, Bai S, Chen L. Microstructure characterization and mechanical properties of TiSi2–SiC–Ti3SiC2 composites prepared by spark plasma sintering. Mater Trans. 2006;47(3):845–8. https://doi.org/10.2320/matertrans.47.845.10.2320/matertrans.47.845 ↗
13. Zhang G-J, Yue X-M, Watanabe T, Yagishita O. In situ synthesis of Mo(Si, Al)2-SiC composites. J Mater Sci. 2000;35:4729–33. https://doi.org/10.1023/A:1004811308556.10.1023/A:1004811308556 ↗
14. Chen Z, He P, Chen L. The role of particles in fatigue crack propagation of aluminum matrix composites and casting aluminum alloys. J Mater Sci Technol. 2007;23(2):213–6.
15. Rocha-Rangel E, Refugio-García E, Miranda-Hernández JG, Terrés-Rojas E. Fracture toughness enhancement for metal-reinforced alumina. J Ceram Proc Res. 2009;10(6):744–7.
16. Lemaitre J. A course on damage mechanics. 2nd ed. Berlin, Heidelberg: Springer-Verlag; 1996. https://doi.org/10.1007/978-3-642-18255-6.10.1007/978-3-642-18255-6 ↗
17. Celentano DJ, Chaboche J-L. Experimental and numerical characterization of damage evolution in steels. Int J Plasticity. 2007;23(10–11):1739–62. https://doi.org/10.1016/j.ijplas.2007.03.008.10.1016/j.ijplas.2007.03.008 ↗
18. Bonora N. Identification and measurement of ductile damage parameters. J Strain Anal Eng Des. 1999;34(6):463–78. https://doi.org/10.1243/0309324991513894.10.1243/0309324991513894 ↗
19. Lemaitre J, Dufailly J. Damage measurements. Eng Fract Mech. 1987;28(5–6):643–61. https://doi.org/10.1016/0013-7944(87)90059-2 special Issue in Honor of Professor Takeo Yokobori.10.1016/0013-7944(87)90059-2 ↗
20. Bonora N, Ruggiero A, Gentile D, De Meo S. Practical applicability and limitations of the elastic modulus degradation technique for damage measurements in ductile metals. Strain. 2011;47(3):241–54. https://doi.org/10.1111/j.1475-1305.2009.00678.x.10.1111/j.1475-1305.2009.00678.x ↗
21. Suquet P. Effective properties of nonlinear composites. In: Suquet P, editor. Continuum micromechanics. CISM lecture notes, vol. 377. New York: Springer; 1997. p. 197–264. https://doi.org/10.1007/978-3-7091-2662-2_410.1007/978-3-7091-2662-2_4 ↗
22. Geers MGD, Kouznetsova VG, Matouš K, Yvonnet J. Homogenization methods and multiscale modeling: nonlinear problems. In: Stein E, Borst R, Hughes TJR (eds) Encyclopedia of computational mechanics. 2nd ed. 2017. https://doi.org/10.1002/9781119176817.ecm210710.1002/9781119176817.ecm2107 ↗
23. Kouznetsova VG, Brekelmans WAM, Baaijens FPT. An approach to micro-macro modeling of heterogeneous materials. Comput Mech. 2001;27:37–48. https://doi.org/10.1007/s004660000212.10.1007/s004660000212 ↗
24. Gornet L, Marguet S, Marckmann G. Modeling of Nomex® honeycomb cores, linear and nonlinear behaviors. Mech Adv Mater Struct. 2007;14(8):589–601. https://doi.org/10.1080/15376490701675370.10.1080/15376490701675370 ↗
25. Llorca J. Deformation and damage in particle-reinforced composites: experiments and model. In: Böhm HJ, editor. Mechanics of microstructured materials. International Centre for Mechanical Sciences (Courses and Lectures), vol. 464. Vienna: Springer; 2004. p. 87–124. https://doi.org/10.1007/978-3-7091-2776-6_4.10.1007/978-3-7091-2776-6_4 ↗
26. Basista M, Węglewski W. Modelling of damage and fracture in ceramic matrix composites—an overview. J Theor Appl Mech. 2006;44(3):455–84.
27. Eckschlager A, Han W, Böhm HJ. A unit cell model for brittle fracture of particles embedded in a ductile matrix. Comput Mater Sci. 2002;25(1–2):85–91. https://doi.org/10.1016/S0927-0256(02)00252-5.10.1016/S0927-0256(02)00252-5 ↗
28. Segurado J, LLorca J. A new three-dimensional interface finite element to simulate fracture in composites. Int J Solids Struct. 2004;41(11–12):2977–93. https://doi.org/10.1016/j.ijsolstr.2004.01.007.10.1016/j.ijsolstr.2004.01.007 ↗
29. Benabou L, Benseddiq N, Naı̈t-Abdelaziz M. Comparative analysis of damage at interfaces of composites. Compos B. 2002;33(3):215–24. https://doi.org/10.1016/S1359-8368(02)00004-5.10.1016/S1359-8368(02)00004-5 ↗
30. Bonfoh N, Lipinski P. Ductile damage micromodeling by particles’ debonding in metal matrix composites. Int J Mech Sci. 2007;49(2):151–60. https://doi.org/10.1016/j.ijmecsci.2006.08.015.10.1016/j.ijmecsci.2006.08.015 ↗
31. LLorca J, Segurado J. Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites. Mater Sci Eng A. 2004;365(1–2):267–74. https://doi.org/10.1016/j.msea.2003.09.035.10.1016/j.msea.2003.09.035 ↗
32. Kursa M, Kowalczyk-Gajewska K, Lewandowski MJ, Petryk H. Elastic-plastic properties of metal matrix composites: validation of mean-field approaches. Eur J Mech A Solids. 2018;68:53–66. https://doi.org/10.1016/j.euromechsol.2017.11.001.10.1016/j.euromechsol.2017.11.001 ↗
33. Chaboche JL, Kruch S, Maire JF, Pottier T. Towards a micromechanics based inelastic and damage modeling of composites. Int J Plast. 2001;17:411–39. https://doi.org/10.1016/S0749-6419(00)00056-5.10.1016/S0749-6419(00)00056-5 ↗
34. Smaga M, Walther F, Eifler D. Monotonic and cyclic deformation behaviour of the SiC particle-reinforced aluminium matrix composite AMC225xe. Adv Eng Mater. 2010;12(4):262–8. https://doi.org/10.1002/adem.200900345.10.1002/adem.200900345 ↗
35. A. Rutecka, Nowoczesne kompozyty w osnowie metalowej (MMC) AA2124/SiC w warunkach rozciągania, zmęczenia i pełzania- pierwszy krok do wykrywania oraz szacowania uszkodzeń, W.J. Gilewski (ed.), Wybrane zagadnienia współczesnej inżynierii lądowej, Monografia Wydziału Inżynierii Lądowej, (2018) 155–170, Warszawa.
36. Winter L, Hockauf K, Lampke T. Temperature and particle size influence on the high cycle fatigue behavior of the SiC reinforced 2124 aluminum alloy. Metals. 2018;8(1):43. https://doi.org/10.3390/met8010043.10.3390/met8010043 ↗
37. Chaboche J-L, Kanouté P, Roos A. On the capabilities of mean-field approaches for the description of plasticity in metal matrix composites. Int J Plasticity. 2005;21(7):1409–34. https://doi.org/10.1016/j.ijplas.2004.07.001.10.1016/j.ijplas.2004.07.001 ↗
38. Sadowski P, Kowalczyk-Gajewska K, Stupkiewicz S. Consistent treatment and automation of the incremental Mori-Tanaka scheme for elasto-plastic composites. Comput Mech. 2017;60(3):493–511. https://doi.org/10.1007/s00466-017-1418-z.10.1007/s00466-017-1418-z ↗
39. Mori T, Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 1973;21(5):571–4. https://doi.org/10.1016/0001-6160(73)90064-3.10.1016/0001-6160(73)90064-3 ↗
40. Hill R. Continuum micro-mechanics of elastoplastic polycrystals. J Mech Phys Solids. 1965;13(2):89–101. https://doi.org/10.1016/0022-5096(65)90023-2.10.1016/0022-5096(65)90023-2 ↗
41. Tandon GP, Weng GJ. A theory of particle-reinforced plasticity. ASME J Appl Mech. 1988;55(1):126–35. https://doi.org/10.1115/1.3173618.10.1115/1.3173618 ↗
42. Doghri I, Ouaar A. Homogenization of two-phase elasto-plastic composite materials and structures. Study of tangent operators, cyclic plasticity and numerical algorithms. Int J Solids Struct. 2003;40:1681–712. https://doi.org/10.1016/S0020-7683(03)00013-1.10.1016/S0020-7683(03)00013-1 ↗
43. Christensen R, Lo K. Solutions for effective shear properties in three phase sphere and cylinder models. J Mech Phys Solids. 1979;27(4):315–30. https://doi.org/10.1016/0022-5096(79)90032-2.10.1016/0022-5096(79)90032-2 ↗
44. Christensen R. Mechanics of composite materials. New York: Dover Publications; 2005.
45. E. Martín, A. Forn, M.T. Baile, J.A. Picas. Influence of heat treatments on mechanical properties of 2124 aluminium matrix composites. In: International Conference on innovative solutions for the advancement of the transport industry, San Sebastián, Spain, 4th–6th October 2006.
46. Ferro-Ceramic Grinding Inc. Ceramic Properties Tables. https://www.ferroceramic.com/Silicon Carbide_table.htm (Last accessed: 2nd June 2020).
47. eFunda, Inc. Mechanical properties of wrought AA2124. https://www.efunda.com (Last accessed: 2nd June 2020).