journal article·2025-12-22Open access

Hybrid wire and arc additive manufactured I-section beams: assessment of material efficiency and carbon footprint

Hannes Eichler, Bartłomiej Sawicki, Harald Kloft

Abstract

Abstract Hybrid wire and arc additive manufacturing (Hybrid WAAM) offers new potentials for local customization of steel structures by adding material precisely where it is required. While the serial production of steel profiles has improved the process efficiency in construction, it is often associated with underutilization of materials, as standard beams are over dimensioned to meet the peak load demands. Hybrid-WAAM I-section beams offer a novel processing solution by combining the benefits of serial production with individualized WAAM strengthening, aiming for efficient material usage. This study evaluates the material efficiency and assesses the carbon footprint of Hybrid-WAAM I-section beams through a cradle-to-gate Life Cycle Assessment (LCA). Results indicate substantial material savings of up to 28% and reductions of CO₂ equivalent up to 27% in the most favorable cases. However, the environmental benefits of Hybrid-WAAM I-section beams depend on structural system, loading conditions and design strategy. In some scenarios, local strengthening may even result in a higher cradle-to-gate CO₂ footprint than conventional profiles. Moreover, the LCA outcomes are highly sensitive to assumptions regarding steel production and regional differences of energy sources, leading to significant variations in CO₂ equivalent estimates. As such, this study highlights that Hybrid-WAAM I-section beams can lead to eco-efficient solutions in steel construction, but the design needs to be supported by a true-to-life LCA.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Topology Optimization in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Di Lorenzo G, Formisano A, Landolfo R. On the origin of I beams and quick analysis on the structural efficiency of hot-rolled steel members. Open Civ Eng J. 2017;11:332–44. https://doi.org/10.2174/1874149501711010332.10.2174/1874149501711010332 ↗
2. Bates W. Historical structural steelwork handbook. London: The British Constructional Steelwork Association; 1991.
3. Shollock B, Thakur D, Couchman G. Why steel in construction? MRS Bull. 2016;41:7700–706. https://doi.org/10.1557/mrs.2016.188.10.1557/mrs.2016.188 ↗
4. Moynihan M, Allwood J. Utilization of structural steel in buildings. Proc R Soc A. 2014. https://doi.org/10.1098/rspa.2014.017010.1098/rspa.2014.0170 ↗
5. International Energy Agency: Emissions Measurement and Data Collection for a Net Zero Steel Industry. IEA. 2023. https://www.iea.org/reports/emissions-measurement-and-data-collection-for-a-net-zero-steel-industry. Accessed 05 Feb 2025.
6. Allwood J. Sustainable materials with both eyes open. Centre for Industrial Sustainability, University of Cambridge; 2019. https://www.cisl.cam.ac.uk/system/files/documents/julian-allwood-sustainable-materials-with-both-eye.pdf. Accessed 05 Feb 2025.
7. Laghi V, Babovic N, Benvenuti E, Kloft H. Blended structural optimization of steel joints for wire-and-arc additive manufacturing. Eng Struct. 2024;300:234–5. https://doi.org/10.1016/j.engstruct.2023.117141.10.1016/j.engstruct.2023.117141 ↗
8. Müller C, Müller J, Kloft H, Hensel J. Design of structural steel components according 8to manufacturing possibilities of the robot-guided DED-Arc process. Buildings. 2022;12(12):2154. https://doi.org/10.3390/buildings12122154.10.3390/buildings12122154 ↗
9. Dörrie R, Laghi V, Arrè L, Kienbaum G, Babovic N, Hack N, Kloft H. Combined additive manufacturing techniques for adaptive coastline protection structures. Buildings. 2022;12(11):1806. https://doi.org/10.3390/buildings1211180.10.3390/buildings1211180 ↗
10. Kloft H, Schmitz LP, Müller C, et al. Experimental application of robotic wire-and-arc additive manufacturing technique for strengthening the I-beam profiles. Buildings. 2023;13(2):366. https://doi.org/10.3390/buildings13020366.10.3390/buildings13020366 ↗
11. Kloft H, Schmitz L, Babovic N. Serial uniqueness: strengthening standard steel profiles with WAAM technology. ce/papers. 2023;6:792–5. https://doi.org/10.1002/cepa.2677.10.1002/cepa.2677 ↗
12. Gardner L, Li J, Meng X, Huang C, Kyvelou P. I-section steel columns strengthened by wire arc additive manufacturing: concept and experiments. Eng Struct. 2024;306:117763. https://doi.org/10.1016/j.engstruct.2024.117763.10.1016/j.engstruct.2024.117763 ↗
13. Baqershahi MH, Ayas C, Ghafoori E. Design optimisation for hybrid metal additive manufacturing for sustainable construction. Eng Struct. 2024;301. https://doi.org/10.1016/j.engstruct.2023.117355.10.1016/j.engstruct.2023.117355 ↗
14. Yang J, Wadee MA, Gardner L. Strengthening of steel I-section beams by wire arc additive manufacturing: concept and experiments. Eng Struct. 2025;322(Part B):119113. https://doi.org/10.1016/j.engstruct.2024.119113.10.1016/j.engstruct.2024.119113 ↗
15. Eichler H, Sawicki B, Kloft H. Quantification of potential of hybrid wire and arc additively manufactured i-beams for resource-efficient and sustainable steel structures. In: Różański A, Bui QB, Sadowski Ł, Tran MT, editors. Proceedings of the 4th International Conference on Sustainable Development in Civil, Urban and Transportation Engineering. CUTE 2024. Lecture Notes in Civil Engineering, vol 418. Singapore: Springer; 2025. https://doi.org/10.1007/978-981-97-9400-3_4410.1007/978-981-97-9400-3_44 ↗
16. Kyvelou P, Huang C, Li J, Gardner L. Residual stresses in steel I-sections strengthened by wire arc additive manufacturing. Structures. 2024;60:105828. https://doi.org/10.1016/j.istruc.2023.105828.10.1016/j.istruc.2023.105828 ↗
17. Müller J, Hensel J, Dilger K. Mechanical properties of wire and arc additively manufactured high-strength steel structures. Weld World. 2022;66:395–407. https://doi.org/10.1007/s40194-021-01204-1.10.1007/s40194-021-01204-1 ↗
18. EN 15804:2019-10. Sustainability of construction works—environmental product declarations—core rules for the product category of construction products (2019).
19. Meex E, Hollberg A, Knapen E, et al. Requirements for applying LCA-based environmental impact assessment tools in the early stages of building design. Build Environ. 2018;133:228–36. https://doi.org/10.1016/j.buildenv.2018.02.016.10.1016/j.buildenv.2018.02.016 ↗
20. Zygomalas I, Baniotopoulos C. Uncertainty in life-cycle assessment induced by life-cycle inventory data: the case of structural. Steel Eng J. 2013;50(2). https://doi.org/10.62913/engj.v50i2.1041.10.62913/engj.v50i2.1041 ↗
21. Häfliger IF, John V, Passer A, et al. Buildings environmental impacts’ sensitivity related to LCA modelling choices of construction materials. J Clean Prod. 2017;156:805–16. https://doi.org/10.1016/j.jclepro.2017.04.052.10.1016/j.jclepro.2017.04.052 ↗
22. Shah IH, Hadjipantelis N, Walter L, et al. Environmental life cycle assessment of wire Arc additively manufactured steel structural components. J Clean Prod. 2023;389. https://doi.org/10.1016/j.jclepro.2023.136071.10.1016/j.jclepro.2023.136071 ↗
23. International EPD. System: https://www.environdec.com. Accessed 09 May 2024.
24. Worldsteel eco-profiles. 2022: https://worldsteel.org/steel-topics/life-cycle-thinking/lca-eco-profiles-2022/. Accessed 09 May 2024.
25. Bekker AC, Verlinden JC. Life cycle assessment of wire + arc additive manufacturing compared to green sand casting and CNC milling in stainless steel. J Clean Prod. 2018;177:438–47. https://doi.org/10.1016/j.jclepro.2017.12.148.10.1016/j.jclepro.2017.12.148 ↗
26. Ecoinvent. https://ecoquery.ecoinvent.org/3.9.1/cutoff/search. Accessed 09 May 2024.
27. https://ourworldindata.org/grapher/carbon-intensity-electricity. Accessed 09 May 2024.