Enhancing freeze-thaw and sulfate resistance of expanded perlite-based alkali-activated lightweight composites with waste tire aggregates and brick powder
Source abstract
Abstract
The utilization of industrial and construction wastes in binder and aggregate systems offers an effective pathway toward sustainable and eco-efficient construction materials. This study examines the mechanical and durability performance of expanded perlite-based alkali-activated lightweight composites (AALCs) incorporating waste tire aggregate (WTA) as a partial or full replacement for expanded perlite (EP) and brick powder (BP) as a supplementary binder with ground granulated blast furnace slag (GBFS). Eight mixtures were prepared with WTA at 0-100% (by volume) and BP at 0-10% (by mass), activated with 12 M NaOH and sodium silicate (SiO2/Na2O = 2.0). Specimens were thermally cured at 40 degrees C and 80 degrees C for 8 h, then tested for compressive and flexural strength, oven-dry density, thermal conductivity, sorptivity, freeze-thaw resistance, high-temperature stability (up to 350 degrees C), and 90-day sulfate resistance in 5% MgSO4. The highest compressive strength (28.82 MPa) was obtained in the GBFS-only mix cured at 80 degrees C. Increasing WTA reduced strength but improved freeze-thaw and thermal performance; full EP replacement (100RB0) yielded the lowest strength (10.15 MPa at 40 degrees C) yet showed excellent freeze-thaw durability with only 3.84% loss. Incorporation of 10% BP enhanced sulfate resistance, with 25RB10 showing 13.63% strength loss versus 29.02% in the unmodified mix. Under thermal exposure, BP mixes retained up to 68% of strength at 250 degrees C, while all suffered >= 90% loss at 350 degrees C. Strong inverse correlations were observed between weight loss and compressive strength across durability tests (R-2 >= 0.90). Thermal conductivity ranged from 0.432 to 0.527 W/mK, decreasing with WTA content. These findings confirm that optimized use of WTA and BP produces lightweight, durable, and eco-efficient AALCs, supporting circular economy goals through waste valorization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Muñoz-Castillo A, Sánchez-Soto PJ, Eliche-Quesada D. Valorisation of rice husk Ash as an activator in the Preparation of alkali-activated cements based on electric Arc furnace slag. Arch Civ Mech Eng. 2025;25(3).10.1007/s43452-025-01209-3 ↗
2. Yılmazoğlu MU, Kara HO, Benli A, Demirkıran AR, Bayraktar OY, Kaplan G. Sustainable alkali-activated foam concrete with pumice aggregate: effects of clinoptilolite zeolite and fly Ash on strength, durability, and thermal performance. Constr Build Mater. 2025;464:140160.10.1016/j.conbuildmat.2025.140160 ↗
3. Kryvenko P, Rudenko I, Sikora P, Sanytsky M, Konstantynovskyi O, Kropyvnytska T. Alkali-activated cements as sustainable materials for repairing Building construction: A review. J Building Eng. 2024;90.10.1016/j.jobe.2024.109399 ↗
4. Bayraktar OY, Yakupoglu U, Benli A. Slag/diatomite-based alkali-activated lightweight composites containing waste andesite sand: mechanical, insulating, microstructural and durability properties. Arch Civ Mech Eng. 2023;23(4).10.1007/s43452-023-00774-9 ↗
5. Samarakoon MH, Ranjith PG, Duan WH, Haque A, Chen BAK. Extensive use of waste glass in one-part alkali-activated materials: towards sustainable construction practices. Waste Manage. 2021;130:1–11.10.1016/j.wasman.2021.04.060 ↗
6. Jurado-Contreras S, Bonet-Martínez E, Sánchez-Soto PJ, Gencel O, Eliche-Quesada D. Synthesis and characterization of alkali-activated materials containing biomass fly Ash and metakaolin: effect of the soluble salt content of the residue. Arch Civ Mech Eng. 2022;22(3).10.1007/s43452-022-00444-2 ↗
7. Dener M, Kılıç H, Benli A. Enhancing mechanical performance of one-part sodium sulfate-activated slag mortars using calcium-rich materials. Constr Build Mater. 2025;476:141285.10.1016/j.conbuildmat.2025.141285 ↗
8. Bayraktar OY, Benli A, Bodur B, Öz A, Kaplan G. Performance assessment and cost analysis of slag/metakaolin based rubberized semi-lightweight geopolymers with perlite aggregate: sustainable reuse of waste tires. Constr Build Mater. 2024;411.10.1016/j.conbuildmat.2023.134655 ↗
9. Turkoglu M, Bayraktar OY, Benli A, Kaplan G. Effect of cement clinker type, curing regime and activator dosage on the performance of one-part alkali-activated hybrid slag/clinker composites. J Building Eng. 2023;68.10.1016/j.jobe.2023.106164 ↗
10. Öz A, Yilmaz MK, Benli A, Kaplan G. Sustainable prepacked alkali-activated concrete: influence of natural zeolite, recycled aggregate, and curing conditions on mechanical, durability, and thermal performance. Arch Civ Mech Eng. 2025;25(5–6).10.1007/s43452-025-01304-5 ↗
11. Lancellotti I, Dal Poggetto G, Barbieri L, Nguyen H, Leonelli C. Chemical resistance in acidic environments of alkali-activated lightweight composites based on secondary Raw materials. J Sustain Cem-Based; 2024.10.1080/21650373.2024.2404595 ↗
12. Rashad AM, Mosleh YA, Mokhtar MM. Thermal insulation and durability of alkali-activated lightweight slag mortar modified with silica fume and fly Ash. Constr Build Mater. 2024;411.10.1016/j.conbuildmat.2023.134255 ↗
13. Zaid O, Martínez-García R, Abadel AA, Fraile-Fernández FJ, Alshaikh IMH. C. Palencia-Coto, to determine the performance of metakaolin-based fiber-reinforced geopolymer concrete with recycled aggregates. Arch Civ Mech Eng. 2025;25(2).10.1007/s43452-025-01168-9 ↗
14. Yang SQ, Guan XW, Lu JX, Cui HZ, Poon CS. Micromechanical and chemical characteristics of interfacial transition zone in alkali-activated slag concrete containing lightweight iron-rich aggregates. Compos Part B-Eng. 2024;283.10.1016/j.compositesb.2024.111671 ↗
15. Bodur B, Bayraktar OY, Benli A, Kaplan G, Tobbala DE, Tayeh B. Effect of using wastewater from the ready-mixed concrete plant on the performance of one-part alkali-activated GBFS/FA composites: fresh, mechanical and durability properties. J Build Eng. 2023;76.10.1016/j.jobe.2023.107167 ↗
16. Bayrak B, Öz A, Benli A, Kavaz E, Kaplan G, Aydin AC. Physico-mechanical and shielding properties of alkali-activated slag composites incorporating cement clinker aggregate: effect of high temperature and particle size. J Build Eng. 2023;67.10.1016/j.jobe.2023.105982 ↗
17. Dai T, Liu TL, Gu HM, Fang CL, Zheng SJ, Jiang GS, Qin BW. Recycling of clay brick powder to improve the microstructure and mechanical properties of oil well cement pastes at high temperature and high pressure conditions. Constr Build Mater. 2023;408.10.1016/j.conbuildmat.2023.133650 ↗
18. Boulebnane MA, Belkadi AA, Boudeghdegh K, Chiker T, Berkouche A, Benaddache L, Cousture A, Aggoun S. Optimizing mix design methods for using slag, ceramic, and glass waste powders in eco-friendly geopolymer mortars. Arch Civ Mech Eng. 2024;25(1):12.10.1007/s43452-024-01077-3 ↗
19. Dieuhou CM, Ngnie G, Tchekwagep JJK, Mbole BRE, Tchakouté HK, Li ZH, Rüscher CH, Nanseu-Njiki CP, Hou PK. Influence of adding silica sand powder on the macroscopic properties and microscopic pore structures of waste-fired clay brick-based geopolymers. Arch Civ Mech Eng. 2025;25(4).10.1007/s43452-025-01222-6 ↗
20. Li Y, Shen JL, Lin H, Lv JF, Feng S, Ci JC. Properties and environmental assessment of eco-friendly brick powder geopolymer binders with varied alkali dosage. J Building Eng. 2022;58.10.1016/j.jobe.2022.105020 ↗
21. Cong PL, Cheng YQ, Ge WS, Zhang AY. Mechanical, microstructure and reaction process of calcium carbide slag-waste red brick powder based alkali-activated materials (CWAAMs). J Clean Prod. 2022;331.10.1016/j.jclepro.2021.129845 ↗
22. O’farrell M, Sabir B, Wild S. Strength and chemical resistance of mortars containing brick manufacturing clays subjected to different treatments. Cem Concrete Comp. 2006;28(9):790–9.10.1016/j.cemconcomp.2006.05.014 ↗
23. O’Farrell M, Wild S, Sabir B. Pore size distribution and compressive strength of waste clay brick mortar. Cem Concrete Comp. 2001;23(1):81–91.10.1016/S0958-9465(00)00070-6 ↗
24. Hwang CL, Yehualaw MD, Vo DH, Huyn TP. Development of high-strength alkali-activated pastes containing high volumes of waste brick and ceramic powders. Constr Build Mater. 2019;218:519–29.10.1016/j.conbuildmat.2019.05.143 ↗
25. Rakhimova NR, Rakhimov RZ. Alkali-activated cements and mortars based on blast furnace slag and red clay brick waste. Mater Design. 2015;85:324–31.10.1016/j.matdes.2015.06.182 ↗
26. Allahverdi A, Kani EN. Construction wastes as Raw materials for geopolymer binders. Int J Civil Eng. 2009;7(3):154–60.
27. Rovnanik P, Rovnanikova P, Vysvaril M, Grzeszczyk S, Janowska-Renkas E. Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer. Constr Build Mater. 2018;188:924–33.10.1016/j.conbuildmat.2018.08.150 ↗
28. Reig L, Tashima MM, Borrachero MV, Monzó J, Cheeseman CR, Payá J. Properties and microstructure of alkali-activated red clay brick waste. Constr Build Mater. 2013;43:98–106.10.1016/j.conbuildmat.2013.01.031 ↗
29. Wong CL, Mo KH, Alengaram UJ, Yap SP. Mechanical strength and permeation properties of high calcium fly ash-based geopolymer containing recycled brick powder. J Building Eng. 2020;32.10.1016/j.jobe.2020.101655 ↗
30. Hwang CL, Yehualaw MD, Vo DH, Huynh TP, Largo A. Performance evaluation of alkali activated mortar containing high volume of waste brick powder blended with ground granulated blast furnace slag cured at ambient temperature. Constr Build Mater. 2019;223:657–67.10.1016/j.conbuildmat.2019.07.062 ↗
31. Demir I, Güzelkucuk S, Sevim O, Simsek O. Investigation of thermal and mechanical properties of perlite-based lightweight geopolymer composites. Arch Civ Mech Eng. 2023;23(4).10.1007/s43452-023-00808-2 ↗
32. Gencel O, Bayraktar OY, Kaplan G, Arslan O, Nodehi M, Benli A, Gholampour A, Ozbakkaloglu T. Lightweight foam concrete containing expanded perlite and glass sand: physico-mechanical, durability, and insulation properties. Constr Build Mater. 2022;320.10.1016/j.conbuildmat.2021.126187 ↗
33. İpek S, Özer G, Yaman CJAoC, Kılınç M. Investigation of thermal conductivity of rubberized concrete as an energy-efficient building material and modeling by artificial intelligence. Engineering. 2023;23(3):168.10.1007/s43452-023-00701-y ↗
34. Bodur B, Isik MAM, Benli A, Bayrak B, Öz A, Bayraktar OY, Kaplan G, Aydin AC. Durability of green rubberized 3D printed lightweight cement composites reinforced with micro attapulgite and micro steel fibers: printability and environmental perspective. J Build Eng. 2024;90.10.1016/j.jobe.2024.109447 ↗
35. Bayraktar OY, Soylemez H, Kaplan G, Benli A, Gencel O, Turkoglu M. Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw. Constr Build Mater. 2021;302:124229.10.1016/j.conbuildmat.2021.124229 ↗
36. Valente M, Sambucci M, Chougan M, Ghaffar SH. Composite alkali-activated materials with waste tire rubber designed for additive manufacturing: an eco-sustainable and energy saving approach. J Mater Res Technol. 2023;24:3098–117.10.1016/j.jmrt.2023.03.213 ↗
37. Li L, Chen ZM, Che WX, Cheng C, Chen YW, Li DH, Liu LH, Guo YC. Ultra-High-Performance Alkali-Activated concrete: effect of waste crumb rubber aggregate proportions on tensile and flexural properties. Buildings. 2024;14(4).10.3390/buildings14041088 ↗
38. Koksal F, Bayraktar OY, Bodur B, Benli A, Kaplan G. Insulating and fire-resistant performance of slag and brick powder based one-part alkali-activated lightweight mortars. Struct Concrete. 2023;24(3):3128–46.10.1002/suco.202200607 ↗
39. Fort J, Mildner M, Keppert M, Pommer V, Cerny R. Experimental and environmental analysis of High-Strength geopolymer based on waste bricks and blast furnace slag. Polym Basel. 2023;15(14).10.3390/polym15143092 ↗
40. Hu JK, Ahmed W, Jiao DW. A critical review of the technical characteristics of recycled brick powder and its influence on concrete properties. Buildings. 2024;14(11).10.3390/buildings14113691 ↗
41. Sharmin S, Biswas WK, Sarker PK. Exploring the potential of using waste clay brick powder in geopolymer applications: a comprehensive review. Buildings. 2024;14(8).10.3390/buildings14082317 ↗
42. El-Seidy E, Chougan M, Al-Noaimat YA, Al-Kheetan MJ, Ghaffar SH. The impact of waste brick and geo-cement aggregates as sand replacement on the mechanical and durability properties of alkali-activated mortar composites. Results Eng. 2024;21.10.1016/j.rineng.2024.101797 ↗
43. Al-Noaimat YA, Chougan M, Albar A, Skibicki S, Federowicz K, Hoffman M, Sibera D, Cendrowski K, Techman M, Pacheco JN, Chung SY, Sikora P, Al-Kheetan M, Ghaffar SH. Recycled brick aggregates in one-part alkali-activated materials: impact on 3D printing performance and material properties. Dev Built Environ. 2023;16.10.1016/j.dibe.2023.100248 ↗
44. Aygun BF, Uysal M, Bilir T, Çoşgun T, Dilbas H. Alternating current curing of conductive fly ash-slag geopolymer mortars: performance, characterization and optimization. Arch Civ Mech Eng. 2024;25(1):46.10.1007/s43452-024-01103-4 ↗
45. Krejsová J, Cerny R. Physical and chemical processes in alkali-activated aluminosilicates at high temperatures and their effect on functional properties: a critical review. Cem Concrete Comp. 2025;162.10.1016/j.cemconcomp.2025.106143 ↗
46. Yaswanth KK, Reddy KHK, Anusha N, Praveen B, Chippymol J, Revathy J, Isleem HF. Engineered geopolymer composites: a comprehensive state-of-the-art review on materials’ perspective. Arch Civ Mech Eng. 2024;24(3).10.1007/s43452-024-01007-3 ↗
47. Liu JH, Guo LZ, Cheng LN, Xi YY, Chen DP. Effect of alkali dosage and silicate modulus on the deterioration of alkali-activated concrete properties subjected to sodium chloride attack and freeze thaw cycles. Constr Build Mater. 2024;449.10.1016/j.conbuildmat.2024.138335 ↗
48. Xiao R, Shen ZL, Si RZ, Polaczyk P, Li YC, Zhou HY, Huang BS. Alkali-activated slag (AAS) and OPC-based composites containing crumb rubber aggregate: physico-mechanical properties, durability and oxidation of rubber upon NaOH treatment. J Clean Prod. 2022;367.10.1016/j.jclepro.2022.132896 ↗
49. Su-Cadirci TB, Calabria-Holley J, Ince C, Ball RJ. Freeze-thaw resistance of pozzolanic hydrated lime mortars. Constr Build Mater. 2023;394.10.1016/j.conbuildmat.2023.131993 ↗
50. Benli A, Öz A, Kiliç D, Tortum A, Yildiz I, Kaplan G. Sustainable fly ash-based geopolymer composites: the influence of RAP aggregates and silica fume on strength, durability, and microstructural properties. Struct Conc; 2025.10.1002/suco.70042 ↗
51. Benli A, Dheyaaldin MH, Öz A, Kara IB, Kaplan G, Aydin AC. Sustainable single and hybrid fiber reinforcement of ternary geopolymer composites with waste marble powder: synergistic effects of micro steel, basalt, and carbon fibers. Struct Conc; 2025.10.1002/suco.70173 ↗
52. ASTM. ASTM C348–19 standard test method for flexural strength of Hydraulic-Cement mortars. West Conshohocken, PA.: ASTM International; 2019.
53. ASTM. ASTM C349–18 standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). ASTM International, West Conshohocken; 2018.
54. ASTM C642–13 standard test method for density, absorption, and voids in hardened concrete. ASTM International, West Conshohocken; 2013.
55. ASTM C518-21 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ASTM International, West Conshohocken; 2021.
56. Koksal F, Nazli T, Benli A, Gencel O, Kaplan G. The effects of cement type and expanded vermiculite powder on the thermo- mechanical characteristics and durability of lightweight mortars at high temperature and RSM modelling. Case Stud Constr Mater. 2021;15.10.1016/j.cscm.2021.e00709 ↗
57. Alcan HG, Benli A, Öz A, Bayrak B, Kaplan G, Aydin AC. Effective utilization of silica fume and waste colemanite in eco-sustainable prepacked geopolymers. Constr Build Mater. 2024;457.10.1016/j.conbuildmat.2024.139438 ↗
58. EN 1015-18. Methods of test for mortar for Masonry – Part 18: determination of water absorption coefficient due to capillary action of hardened mortar. European Committee for Standardization (CEN), Brussels; 2002.
59. ASTM C666/C666M-15. 2015 standard test method for resistance of concrete to rapid freezing and thawing. ASTM International, West Conshohocken, PA.
60. Shi S, Li H, Zhou QZ, Zhang HZ, Basheer PAM, Bai Y. Alkali-activated fly Ash cured with pulsed microwave and thermal oven: A comparison of reaction products, microstructure and compressive strength. Cem Concr Res. 2023;166.10.1016/j.cemconres.2023.107104 ↗
61. Bodur B, Benli A, Bayraktar OY, Alcan HG, Kaplan G, Aydin AC. Impact of attapulgite and basalt fiber additions on the performance of pumice-based foam concrete: mechanical, thermal, and durability properties. Arch Civ Mech Eng. 2025;25(2).10.1007/s43452-025-01128-3 ↗
62. Arslan S, Öz A, Benli A, Bayrak B, Kaplan G, Aydin AC. Sustainable use of silica fume and Metakaolin in slag/fly ash-based self-compacting geopolymer composites: Fresh, physico-mechanical and durability properties. Sustain Chem Pharm. 2024;38.10.1016/j.scp.2024.101512 ↗
63. Guo XL, Shi HS, Wei X. Pore properties, inner chemical environment, and microstructure of nano-modified CFA-WBP (class C fly ash-waste brick powder) based geopolymers. Cem Concrete Comp. 2017;79:53–61.10.1016/j.cemconcomp.2017.01.007 ↗
64. Mohajerani A, Burnett L, Smith JV, Markovski S, Rodwell G, Rahman MT, Kurmus H, Mirzababaei M, Arulrajah A, Horpibulsuk S, Maghool F. Recycling waste rubber tyres in construction materials and associated environmental considerations: a review. Resour Conserv Recy. 2020;155.10.1016/j.resconrec.2020.104679 ↗
65. Azmi AA, Abdullah MMA, Ghazali CMR, Ahmad R, Jaya RP, Abd Rahim SZ, Almadani MA, Wyslocki JJ, Sliwa A, Sandu AV. Crumb rubber geopolymer mortar at elevated temperature exposure. Arch Civ Eng. 2022;68(3):87–105.
66. Bayraktar OY, Bozkurt TH, Benli A, Koksal F, Tuerkoglu M, Kaplan G. Sustainable one-part alkali activated slag/fly Ash Geo-SIFCOM containing recycled sands: mechanical, flexural, durability and microstructural properties. Sustain Chem Pharm. 2023;36.10.1016/j.scp.2023.101319 ↗
67. Bayrak B, Benli A, Alcan HG, Çelebi O, Kaplan G, Aydin AC. Recycling of waste marble powder and waste colemanite in ternary-blended green geopolymer composites: Mechanical, durability and microstructural properties. J Build Eng. 2023;73.10.1016/j.jobe.2023.106661 ↗
68. Wu HX, Gao JM, Liu C, Guo ZH, Luo X. Reusing waste clay brick powder for low-carbon cement concrete and alkali-activated concrete: a critical review. J Clean Prod. 2024;449.10.1016/j.jclepro.2024.141755 ↗
69. Benli A. Sustainable use of waste glass sand and waste glass powder in alkali-activated slag foam concretes: physico-mechanical, thermal insulation and durability characteristics. Constr Build Mater. 2024;438.10.1016/j.conbuildmat.2024.137128 ↗
70. Koksal F, Yildirim MS, Benli A, Gencel O. Hybrid effect of micro-steel and basalt fibers on physico-mechanical properties and durability of mortars with silica fume. Case Stud Constr Mater. 2021;15.10.1016/j.cscm.2021.e00649 ↗
71. Dheyaaldin MH, Bayraktar OY, Öz A, Kaplan G. Sustainable use of waste tire rubbers in eco-friendly and lightweight alkali-activated slag-silica fume mortars. J Mater Civ Eng. 2024;36(12).10.1061/JMCEE7.MTENG-18152 ↗
72. Statkauskas M, Grinys A, Borg RP. Mechanical properties and microstructure of ternary alkali activated system: red brick waste, Metakaolin and phosphogypsum. Constr Build Mater. 2023;387.10.1016/j.conbuildmat.2023.131648 ↗
73. Gudiel E, Payá J, Borrachero MV, Monzó JM. Physico-Mechanical properties of Alkali-Activated based composites using recycled tire fibers. Appl Sci-Basel. 2025;15(3).10.3390/app15031346 ↗
74. Yilmazoglu MU, Kara HO, Benli A, Demirkiran AR, Bayraktar OY, Kaplan G. Sustainable alkali-activated foam concrete with pumice aggregate: effects of clinoptilolite zeolite and fly Ash on strength, durability, and thermal performance. Constr Build Mater. 2025;464.10.1016/j.conbuildmat.2025.140160 ↗
75. Hittini W, Mourad A-HI, Abu-Jdayil B. Utilization of devulcanized waste rubber tire in development of heat insulation composite. J Clean Prod. 2021;280:124492.10.1016/j.jclepro.2020.124492 ↗
76. Yolcu A, Karakoc MB, Ekinci E, Ozcan A, Sagir MA. Effect of binder dosage and the use of waste rubber fiber on the mechanical and durability performance of geopolymer concrete. J Building Eng. 2022;61.10.1016/j.jobe.2022.105162 ↗
77. Ma ZM, Wang B, Zhang ZY, Zhang YC, Wang CQ. New insights into the effects of silicate modulus, alkali content and modification on multi-properties of recycled brick powder-based geopolymer. J Building Eng. 2024;97.10.1016/j.jobe.2024.110989 ↗
78. Tuyan M, Andic-Cakir O, Ramyar K. Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer. Compos Part B-Eng. 2018;135:242–52.10.1016/j.compositesb.2017.10.013 ↗
79. Bayraktar OY, Yarar G, Benli A, Kaplan G, Gencel O, Sutcu M, Kozlowski M, Kadela M. Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement. Struct Concrete. 2023;24(1):1152–78.10.1002/suco.202200142 ↗
80. Paktiawal A, Alam M. Experimental evaluation of sorptivity for high strength concrete reinforced with zirconia rich glass fiber and basalt fiber. Mater Today Proc. 2021.10.1016/j.matpr.2021.06.008 ↗
81. Zhao YS, Gao JM, Liu CB, Chen XM, Xu ZH. The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement. J Clean Prod. 2020;242.10.1016/j.jclepro.2019.118521 ↗
82. Jin P, Li ZL, Li L, Li ZJ, Bao JW. Development of high-water-resistance and high-strength alkali- activated foam by using waste brick powder. Constr Build Mater. 2025;467.10.1016/j.conbuildmat.2025.140397 ↗
83. Pham TM, Elchalakani M, Hao H, Lai J, Ameduri S, Iran TM. Durability characteristics of lightweight rubberized concrete. Constr Build Mater. 2019;224:584–99.10.1016/j.conbuildmat.2019.07.048 ↗
84. Yehualaw MD, Hwang CL, Vo DH, Koyenga A. Effect of alkali activator concentration on waste brick powder-based ecofriendly mortar cured at ambient temperature. J Mater Cycles Waste Manage. 2021;23(2):727–40.10.1007/s10163-020-01164-6 ↗
85. Mabrouk A, Raza A, Elhadi KM, Ahmed B, Kubica J, Chen WS. Effect of curing temperature, silica fume, and waste tire rubber aggregate on material characterization of lightweight geopolymer composite. Constr Build Mater. 2024;453.10.1016/j.conbuildmat.2024.139063 ↗
86. Cardoza A, Colorado HA. Alkali-activated cement manufactured by the alkaline activation of demolition and construction waste using brick and concrete wastes. Open Ceram. 2023;16.10.1016/j.oceram.2023.100438 ↗
87. Benli A, Bayraktar OY, Karatas M, Bodur B, Yilmazoglu MU, Kaplan G. Dunite powder as a green precursor in one-part alkali-activated composites: effects on mechanical and durability properties. Sustain Chem Pharm. 2025;44.10.1016/j.scp.2025.101964 ↗
88. Öz A, Kiliç D, Benli A, Tortum A, Kaplan G, Aydin AC. Sustainable use of waste marble powder and reclaimed asphalt pavement as aggregates in slag/metakaolin-based self-compacting geopolymer composites: properties and durability. Sustain Chem Pharm. 2024;42.10.1016/j.scp.2024.101876 ↗
89. Guo YC, Zhang JH, Chen GM, Xie ZH. Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures. J Clean Prod. 2014;72:193–203.10.1016/j.jclepro.2014.02.036 ↗
90. Luhar S, Luhar I, Nicolaides D, Gupta R. Durability performance evaluation of rubberized geopolymer concrete. Sustain Basel. 2021;13(11).10.3390/su13115969 ↗
91. Beltrame NA, da Luz CA, Perardt M, Hooton RD. Alkali activated cement made from blast furnace slag generated by charcoal: resistance to attack by sodium and magnesium sulfates. Constr Build Mater. 2020;238.10.1016/j.conbuildmat.2019.117710 ↗
92. Ye HL, Chen ZJ, Huang L. Mechanism of sulfate attack on alkali-activated slag: the role of activator composition. Cem Concr Res. 2019;125.10.1016/j.cemconres.2019.105868 ↗
93. Ji YC, Ji WH, Li W. Mechanical properties of recycled brick powder engineering cementitious composites under freeze-thaw cycling environment. Compos Adv Mater. 2024;33.10.1177/26349833241240775 ↗
94. Grinys A, Augonis A, Dauksys M, Pupeikis D. Mechanical properties and durability of rubberized and SBR latex modified rubberized concrete. Constr Build Mater. 2020; 248.10.1016/j.conbuildmat.2020.118584 ↗
95. Zeyad AM, Magbool HM, Mutnbak M, Amin M, Agwa IS. Effect of steel fibers, polypropylene fibers, and silica fume on the properties of ultra-high-performance geopolymer concrete. Arch Civ Mech Eng. 2025;25(4).10.1007/s43452-025-01228-0 ↗
96. Zhang Y, He Y, Cui X, Liu L. Enhancing freeze–thaw resistance of alkali-activated slag by Metakaolin. Acs Omega. 2023;8(23):20869–80.10.1021/acsomega.3c01600 ↗
97. Wang HL, Wu YH, Cheng BQ. Mechanical properties of alkali-activated concrete containing crumb rubber particles. Case Stud Constr Mater. 2022;16.10.1016/j.cscm.2021.e00803 ↗
98. Tekle BH, Ly TV, Hertwig L, Holschemacher K. Freeze-thaw resistance and sorptivity of fine-grained alkali-activated cement concrete. Struct Conc. 2023;24(3):4286–96.10.1002/suco.202200902 ↗
99. Ahmed HU, Mohammed AA, Mohammed AS. Effectiveness of nano-SiO2 on the mechanical, durability, and microstructural behavior of geopolymer concrete at different curing ages. Arch Civ Mech Eng. 2023;23(2).10.1007/s43452-023-00668-w ↗
100. Lu Y, Zhang Y, Liu S, Guo W, Xu F. Mechanical behaviour and permeability of expansive soils mixed with scrap tire rubbers subjected to freeze-thaw cycles. Cold Regions Sci Technol. 2022;199:103580.10.1016/j.coldregions.2022.103580 ↗