Tribological and predictive performance of graphene quantum dots as lubricant in machining LMD processed Ti-grade 2
Source abstract
Abstract
Abstract Additive manufacturing (AM) of titanium alloys offers significant benefits, including design flexibility and material efficiency; however, its poor surface quality often necessitates subsequent machining. Traditional cooling techniques have shown limited effectiveness, particularly with challenging materials like Titanium grade 2 (Ti-grade 2). In this study, graphene quantum dots (GQDs) were prepared using citric acid and employed as the minimum quantity lubrication (MQL) fluid, which was compared with MQL and cryogenic liquid nitrogen (cryo-LN 2 ) in the turning of Additive Manufactured-Titanium-grade 2 (AMed-Ti Grade 2). In addition, machine learning (ML) models, including multilayer perceptron (MLP), support vector machine (SVM), and random forest (RF), were utilized to predict machining responses [surface roughness (Ra), temperature (Tc), and flank wear (Vb)]. GQD–MQL demonstrated superior tool wear resistance by forming a stable tribo-film, minimizing Vb and crater wear. In contrast, MQL exhibited high wear due to inadequate lubrication, while cryo-LN 2 provided moderate control through effective cooling. However, in terms of Tc, cryo-LN 2 produced the lowest temperature in the cutting area when compared to other conditions. The ML models revealed that the MLP model accurately predicted Ra and Tc, whereas SVM outperformed the other models in predicting Vb.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Li A, Zhang R, Liu J, Song X. Effect of cutting process adjustment on crystallographic texture of machined surface layer of titanium alloy. Arch Civ Mech Eng. 2023;23:1–21. https://doi.org/10.1007/s43452-022-00563-w.10.1007/s43452-022-00563-w ↗
2. Zhang C, Zou D, Mazur M, Mo JPT, Li G, Ding S. The state of the art in machining additively manufactured titanium alloy Ti-6Al-4V. Materials (Basel). 2023. https://doi.org/10.3390/ma16072583.10.3390/ma16072583 ↗
3. Liu Y, Dong H, Wang H, Xiao G, Meng F. Multi-objective titanium alloy belt grinding parameters optimization oriented to resources allocation and environment. Int J Adv Manuf Technol. 2021. https://doi.org/10.1007/s00170-021-06644-z.10.1007/s00170-021-06644-z ↗
4. Farooq MU, Anwar S, Ullah R, Guerra RH. Sustainable machining of additive manufactured SS-316L underpinning low carbon manufacturing goal. J Mater Res Technol. 2023;24:2299–318. https://doi.org/10.1016/j.jmrt.2023.03.122.10.1016/j.jmrt.2023.03.122 ↗
5. Kallel A, Duchosal A, Altmeyer G, Morandeau A, Hamdi H, Leroy R, et al. Finish milling study of Ti-6Al-4V produced by laser metal deposition (LMD). MM Sci J. 2019;2019:3258–64. https://doi.org/10.17973/MMSJ.2019_11_2019079.10.17973/MMSJ.2019_11_2019079 ↗
6. Dang J, Cai X, Yu D, An Q, Ming W, Chen M. Effect of material microstructure on tool wear behavior during machining additively manufactured Ti6Al4V. Arch Civ Mech Eng. 2020;20:1–15. https://doi.org/10.1007/s43452-019-0007-7.10.1007/s43452-019-0007-7 ↗
7. Zimmermann M, Müller D, Kirsch B, Greco S, Aurich JC. Analysis of the machinability when milling AlSi10Mg additively manufactured via laser-based powder bed fusion. Int J Adv Manuf Technol. 2021;112:989–1005. https://doi.org/10.1007/s00170-020-06391-7.10.1007/s00170-020-06391-7 ↗
8. Ezugwu EO, Wang ZM. Titanium alloys and their machinability—a review. J Mater Process Technol. 1997;68:262–74. https://doi.org/10.1016/S0924-0136(96)00030-1.10.1016/S0924-0136(96)00030-1 ↗
9. Hong SY, Ding Y. Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V. Int J Mach Tools Manuf. 2001;41:1417–37. https://doi.org/10.1016/S0890-6955(01)00026-8.10.1016/S0890-6955(01)00026-8 ↗
10. Kallel A, Duchosal A, Hamdi H, Altmeyer G, Morandeau A, Méo S. Analysis of the surface integrity induced by face milling of laser metal deposited Ti-6Al-4V. Procedia CIRP. 2023;87:345–50. https://doi.org/10.1016/j.procir.2020.02.030.10.1016/j.procir.2020.02.030 ↗
11. Khaliq W, Zhang C, Jamil M, Khan AM. Tool wear, surface quality, and residual stresses analysis of micro-machined additive manufactured Ti–6Al–4V under dry and MQL conditions. Tribol Int. 2020;151:106408. https://doi.org/10.1016/j.triboint.2020.106408.10.1016/j.triboint.2020.106408 ↗
12. Ni C, Wang X, Zhu L, Liu D, Wang Y, Zheng Z, et al. Machining performance and wear mechanism of PVD TiAlN/AlCrN coated carbide tool in precision machining of selective laser melted Ti6Al4V alloys under dry and MQL conditions. J Manuf Process. 2022;79:975–89. https://doi.org/10.1016/j.jmapro.2022.05.036.10.1016/j.jmapro.2022.05.036 ↗
13. Gunan F, Kivak T, Yildirim CV, Sarikaya M. Performance evaluation of MQL with Al2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy. J Mater Res Technol. 2020;9:10386–400. https://doi.org/10.1016/j.jmrt.2020.07.018.10.1016/j.jmrt.2020.07.018 ↗
14. Pušavec F, Grguraš D, Koch M, Krajnik P. Cooling capability of liquid nitrogen and carbon dioxide in cryogenic milling. CIRP Ann. 2019;68:73–6. https://doi.org/10.1016/j.cirp.2019.03.016.10.1016/j.cirp.2019.03.016 ↗
15. Rubio JCC, Ricci VP, Rodrigues AR, Kliauga AM, Ventura CEH. Cryogenic turning of Ti-15Mo alloy. Int J Adv Manuf Technol. 2025. https://doi.org/10.1007/s00170-025-15410-4.10.1007/s00170-025-15410-4 ↗
16. Bordin A, Sartori S, Bruschi S, Ghiotti A. Experimental investigation on the feasibility of dry and cryogenic machining as sustainable strategies when turning Ti6Al4V produced by additive manufacturing. J Clean Prod. 2017;142:4142–51. https://doi.org/10.1016/j.jclepro.2016.09.209.10.1016/j.jclepro.2016.09.209 ↗
17. Bruschi S, Bertolini R, Bordin A, Medea F, Ghiotti A. Influence of the machining parameters and cooling strategies on the wear behavior of wrought and additive manufactured Ti6Al4V for biomedical applications. Tribol Int. 2016;102:133–42. https://doi.org/10.1016/j.triboint.2016.05.036.10.1016/j.triboint.2016.05.036 ↗
18. Zadafiya K, Shah P, Shokrani A, Khanna N. Recent advancements in nano-lubrication strategies for machining processes considering their health and environmental impacts. J Manuf Process. 2021;68:481–511. https://doi.org/10.1016/j.jmapro.2021.05.056.10.1016/j.jmapro.2021.05.056 ↗
19. Etri HEL, Singla AK, Özdemir MT, Korkmaz ME, Demirsöz R, Gupta MK, et al. Wear performance of Ti-6Al-4 V titanium alloy through nano-doped lubricants. Arch Civ Mech Eng. 2023;23:1–15. https://doi.org/10.1007/s43452-023-00685-9.10.1007/s43452-023-00685-9 ↗
20. Yi S, Li J, Zhu J, Wang X, Mo J, Ding S. Investigation of machining Ti-6Al-4V with graphene oxide nanofluids: tool wear, cutting forces and cutting vibration. J Manuf Process. 2020;49:35–49. https://doi.org/10.1016/j.jmapro.2019.09.038.10.1016/j.jmapro.2019.09.038 ↗
21. Ahmed A, Danish M. Synthesis and characterization of carbon-based MWCNT combined with CaO to improve the surface characteristics of DED-processed Ti64 alloy machined under MQL conditions. J Mol Liq. 2024;413:126081. https://doi.org/10.1016/j.molliq.2024.126081.10.1016/j.molliq.2024.126081 ↗
22. Al Jahdaly BA, Elsadek MF, Ahmed BM, Farahat MF, Taher MM, Khalil AM. Outstanding graphene quantum dots from carbon source for biomedical and corrosion inhibition applications: a review. Sustainability. 2021;13:1–33. https://doi.org/10.3390/su13042127.10.3390/su13042127 ↗
23. Xu P, Hong J, Xu Z, Xia H, Ni QQ. Novel aminated graphene quantum dots (GQDs-NH2)-engineered nanofiltration membrane with high Mg2+/Li+ separation efficiency. Sep Purif Technol. 2021;258:118042. https://doi.org/10.1016/j.seppur.2020.118042.10.1016/j.seppur.2020.118042 ↗
24. Tang J, Chen S, Jia Y, Ma Y, Xie H, Quan X, et al. Carbon dots as an additive for improving performance in water-based lubricants for amorphous carbon (a-C) coatings. Carbon N Y. 2020;156:272–81. https://doi.org/10.1016/j.carbon.2019.09.055.10.1016/j.carbon.2019.09.055 ↗
25. Qiang R, Hu L, Hou K, Wang J, Yang S. Water-soluble graphene quantum dots as high-performance water-based lubricant additive for steel/steel contact. Tribol Lett. 2019;67:1–9. https://doi.org/10.1007/s11249-019-1177-4.10.1007/s11249-019-1177-4 ↗
26. Ghorbani E, Yagiz S. Predicting disc cutter wear using two optimized machine learning techniques. Arch Civ Mech Eng. 2024;24:1–20. https://doi.org/10.1007/s43452-024-00911-y.10.1007/s43452-024-00911-y ↗
27. Sarker IH, Furhad H, Nowrozy R. AI - driven cybersecurity: an overview, security intelligence modeling and research directions. SN Comput Sci. 2021;2:1–18. https://doi.org/10.1007/s42979-021-00557-0.10.1007/s42979-021-00557-0 ↗
28. Sarker IH. Machine learning: algorithms, real-world applications and research directions. SN Comput Sci. 2021;2:1–21. https://doi.org/10.1007/s42979-021-00592-x.10.1007/s42979-021-00592-x ↗
29. Kosarac A, Tabakovic S, Mladjenovic C, Zeljkovic M, Orasanin G. Next-gen manufacturing: machine learning for surface roughness prediction in Ti-6Al-4V biocompatible alloy machining. J Manuf Mater Process. 2023. https://doi.org/10.3390/jmmp7060202.10.3390/jmmp7060202 ↗
30. Dubey V, Sharma AK, Pimenov DY. Prediction of surface roughness using machine learning approach in MQL turning of AISI 304 steel by varying nanoparticle size in the cutting fluid. Lubricants. 2022. https://doi.org/10.3390/lubricants10050081.10.3390/lubricants10050081 ↗
31. Paengchit P, Saikaew C. Simulation of the influence of cutting speed and feed rate on tool life in hard turning of AISI 4140 steel. Mater Sci Pol. 2023;41:311–24. https://doi.org/10.2478/msp-2023-0021.10.2478/msp-2023-0021 ↗
32. Ni J, Feng K, Zhao H, Wang Z, Meng Z. Wettability enhancement of high-speed steel surface with electrostatic flocking method. Colloids Surf A Physicochem Eng Asp. 2022;651:129781. https://doi.org/10.1016/j.colsurfa.2022.129781.10.1016/j.colsurfa.2022.129781 ↗
33. Korkmaz ME, Gupta MK, Kuntoğlu M, Patange AD, Ross NS, Yılmaz H, et al. Prediction and classification of tool wear and its state in sustainable machining of Bohler steel with different machine learning models. Measurement. 2023. https://doi.org/10.1016/j.measurement.2023.113825.10.1016/j.measurement.2023.113825 ↗
34. Leśniak A, Juszczyk M. Prediction of site overhead costs with the use of artificial neural network based model. Arch Civ Mech Eng. 2018;18:973–82. https://doi.org/10.1016/j.acme.2018.01.014.10.1016/j.acme.2018.01.014 ↗
35. Asmael M, Nasir T, Zeeshan Q, Safaei B, Kalaf O, Motallebzadeh A, et al. Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms. Arch Civ Mech Eng. 2022;22:1–19. https://doi.org/10.1007/s43452-022-00411-x.10.1007/s43452-022-00411-x ↗
36. Huang SJ, Adityawardhana Y. Prediction of mechanical properties and fractography examination of AZ91 magnesium composites reinforced with graphene using a random forest machine learning model: experimental validation. Arch Civ Mech Eng. 2025;25:259. https://doi.org/10.1007/s43452-025-01308-1.10.1007/s43452-025-01308-1 ↗
37. Ganie SM, Pramanik PKD, Zhao Z. Ensemble learning with explainable AI for improved heart disease prediction based on multiple datasets. Sci Rep. 2025;15:1–34. https://doi.org/10.1038/s41598-025-97547-6.10.1038/s41598-025-97547-6 ↗
38. Sujith SV, Mulik RS. Surface integrity and flank wear response under pure coconut oil-Al2O3 nano minimum quantity lubrication turning of Al-7079/7 wt%-TiC in situ metal matrix composites. J Tribol. 2022. https://doi.org/10.1115/1.4051863.10.1115/1.4051863 ↗
39. Korkmaz ME, Gupta MK, Boy M, Yaşar N, Krolczyk GM, Günay M. Influence of duplex jets MQL and nano-MQL cooling system on machining performance of Nimonic 80A. J Manuf Process. 2021;69:112–24. https://doi.org/10.1016/j.jmapro.2021.07.039.10.1016/j.jmapro.2021.07.039 ↗
40. Binali R, Demirpolat H, Kuntoğlu M, Sağlam H. Machinability investigations based on tool wear, surface roughness, cutting temperature, chip morphology and material removal rate during dry and MQL-assisted milling of Nimax mold steel. Lubricants. 2023. https://doi.org/10.3390/lubricants11030101.10.3390/lubricants11030101 ↗
41. Ross NS, Ganesh M, Srinivasan D, Gupta MK, Korkmaz ME, Krolczyk JB. Role of sustainable cooling/lubrication conditions in improving the tribological and machining characteristics of Monel-400 alloy. Tribol Int. 2022;176:107880. https://doi.org/10.1016/j.triboint.2022.107880.10.1016/j.triboint.2022.107880 ↗
42. Wang Y, Dai M, Liu K, Liu J, Han L, Liu H. Research on surface heat transfer mechanism of liquid nitrogen jet cooling in cryogenic machining. Appl Therm Eng. 2020. https://doi.org/10.1016/j.applthermaleng.2020.115607.10.1016/j.applthermaleng.2020.115607 ↗
43. Tamil Alagan N, Sajja NT, Zeman P, Primus T, Falk K, Awe SA. Sustainable machining of aluminum MMCs: the role of biomimetic textured cutting tools in cryogenic conditions. J Manuf Process. 2025;133:1005–24. https://doi.org/10.1016/j.jmapro.2024.11.057.10.1016/j.jmapro.2024.11.057 ↗
44. Da Silva RB, MacHado ÁR, Ezugwu EO, Bonney J, Sales WF. Tool life and wear mechanisms in high speed machining of Ti-6Al-4V alloy with PCD tools under various coolant pressures. J Mater Process Technol. 2013;213:1459–64. https://doi.org/10.1016/j.jmatprotec.2013.03.008.10.1016/j.jmatprotec.2013.03.008 ↗
45. Oliaei SNB, Karpat Y. Built-up edge effects on process outputs of titanium alloy micro milling. Precis Eng. 2017;49:305–15. https://doi.org/10.1016/j.precisioneng.2017.02.019.10.1016/j.precisioneng.2017.02.019 ↗
46. Thornton RW, Slatter T, Lewis R. Thesis Investigating the effects of cryogenic processing on the wear performance and microstructure of engineering materials; 2014.
47. Shokrani A, Al-Samarrai I, Newman ST. Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy. J Manuf Process. 2019;43:229–43. https://doi.org/10.1016/j.jmapro.2019.05.006.10.1016/j.jmapro.2019.05.006 ↗
48. Lane BM, Dow TA, Scattergood R. Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel. Wear. 2013;300:216–24. https://doi.org/10.1016/j.wear.2013.02.012.10.1016/j.wear.2013.02.012 ↗
49. Derani MN, Ratnam MM. The use of tool flank wear and average roughness in assessing effectiveness of vegetable oils as cutting fluids during turning—a critical review. Int J Adv Manuf Technol. 2021;112:1841–71. https://doi.org/10.1007/s00170-020-06490-5.10.1007/s00170-020-06490-5 ↗
50. Sartori S, Moro L, Ghiotti A, Bruschi S. On the tool wear mechanisms in dry and cryogenic turning additive manufactured titanium alloys. Tribol Int. 2017;105:264–73. https://doi.org/10.1016/j.triboint.2016.09.034.10.1016/j.triboint.2016.09.034 ↗
51. Gao Y, Wang G, Liu B. Chip formation characteristics in the machining of titanium alloys: a review. Int J Mach Mach Mater. 2016;18:155–84. https://doi.org/10.1504/IJMMM.2016.075467.10.1504/IJMMM.2016.075467 ↗
52. Korkmaz ME, Gupta MK. A state of the art on cryogenic cooling and its applications in the machining of difficult-to-machine alloys. Materials (Basel). 2024. https://doi.org/10.3390/ma17092057.10.3390/ma17092057 ↗