Estimating fundamental frequency of masonry arches under elevated temperature: numerical analysis and validation using ambient vibration tests
Source abstract
Abstract
In this study, the changing of dynamic characteristics of masonry arches at varying geometric parameters and temperature histories was investigated through a combination of experimental and numerical methods. First, the dynamic characteristics of laboratory-built arch models were determined both pre- and post-high-temperature test using ambient vibration testing. Then, the finite element (FE) models of the arches were developed for both, allowing for dynamic characteristics to be assessed numerically. To refine the accuracy of numerical models, FE analyses were adjusted based on experimental data. These updated FE models were used to investigate the dynamic characteristics of arches with different spans, heights, widths, and thicknesses under different temperature history scenarios. Finally, utilizing the data repository obtained, formulation and graphs/charts, providing valuable insights into the dynamic response of masonry arches under fire conditions, were developed and presented for practical application. The experimental study revealed that the natural frequencies of arches decreased by 55% with increasing temperature exposure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Health Monitoring Techniques · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Pirchio D, Walsh KQ, Kerr E, Giongo I, Giaretton M, Weldon BD, Ciocci L, Sorrentino L. Integrated framework to structurally model unreinforced masonry Italian medieval churches from photogrammetry to finite element model analysis through heritage building information modeling. Eng Struct. 2021;241:112439. https://doi.org/10.1016/j.engstruct.2021.112439.10.1016/j.engstruct.2021.112439 ↗
2. Altunişik AC, Bayraktar A, Sevim B, Birinci F. Vibration-based operational modal analysis of the Mikron historic arch bridge after restoration. Civ Eng Environ Syst. 2011;28(3):247–59. https://doi.org/10.1080/10286608.2011.588328.10.1080/10286608.2011.588328 ↗
3. Votsis RA, Kyriakides N, Chrysostomou CZ, Tantele E, Demetriou T. Ambient vibration testing of two masonry monuments in Cyprus. Soil Dyn Earthq Eng. 2012;43:58–68. https://doi.org/10.1016/j.soildyn.2012.07.015.10.1016/j.soildyn.2012.07.015 ↗
4. Standoli G, Giordano E, Milani G, Clementi F. Model updating of historical belfries based on Oma identification techniques. Int J Archit Herit. 2021;15(1):132–56. https://doi.org/10.1080/15583058.2020.1723735.10.1080/15583058.2020.1723735 ↗
5. Bayraktar A, Hökelekli E, Türker T, Çalik İ, Ashour A, Mosallam A. Window opening effects on structural behavior of historical masonry Fatih Mosque. Int J Archit Herit. 2019;13(4):585–99. https://doi.org/10.1080/15583058.2018.1447617.10.1080/15583058.2018.1447617 ↗
6. Calayır Y, Yetkin M, Erkek H. Finite element model updating of masonry minarets by using operational modal analysis method. Structures. 2021;34:3501–7. https://doi.org/10.1016/j.istruc.2021.09.103.10.1016/j.istruc.2021.09.103 ↗
7. Günaydın M, Demirkır C, Altunışık AC, Gezer ED, Genç AF, Okur FY. Diagnosis and monitoring of historical timber velipaşa han building prior to restoration. Int J Archit Herit. 2023;17(2):285–309.10.1080/15583058.2021.1919239 ↗
8. Altunişik AC, Öztürk MM, Genç AF, Günaydın M, Kaya A, Akbulut YE, Sunca F. Dynamic characteristics changes of masonry arches exposed to elevated temperature. Constr Build Mater. 2024;418:135423.10.1016/j.conbuildmat.2024.135423 ↗
9. ASTM C 1314–02a, Standard Test Method for Compressive Strength of Masonry Prisms, (2002). ASTM International, West Conshohocken, PA.
10. TS EN 1052–1, Methods of test for masonry—Part 1: Determination of compressive strength, (2000). Turkish Standards Institute (TSI), Ankara, Turkey.
11. PULSE. (2006). Analyzers and Solutions, Release 11.2. Bruel and Kjaer, Sound and Vibration Measurement A/S, Denmark.
12. OMA. (2006). Operational Modal Analysis, Release 4.0. Structural Vibration Solution A/S, Denmark.
13. ABAQUS. (2017). Dassault Systems Simulia Corporation, Providence, Rhode Island.
14. TS 500, Design and Construction Rules of Reinforced Concrete Structures, (2000). Turkish Standards Institute (TSI), Ankara, Turkey. (2000).
15. Guadagnuolo M, Aurilio M, Basile A, Faella G. Modulus of elasticity and compressive strength of tuff masonry: results of a wide set of flat-jack tests. Buildings. 2020;10(5):84.10.3390/buildings10050084 ↗
16. FEMA-273, 1997. FEMA356 Nehrp Guidelines for The Seismic Rehabilitation of Buildings, Building Seismic Safety Council, Washington, D.C. USA
17. MSJC, 2002. Building code requirements for masonry structures, Masonry Standards Joint Committee (MSJC). ACI 530–02, ASCE 5–02, TMS 402, 2.
18. TEC, 2018. TEC2018 Turkey Earthquake Building Codes, Disaster and Emergency Management Presidency-Earthquake Department, Ankara.
19. CSA S304, 2004. Design of masonry structures, Canadian Standards Association (CSA), Mississauga, Canada.
20. EN 1996–1–1, 2005. Eurocode 6: Design of masonry structures - Part 1–1: General rules for reinforced and unreinforced masonry structures, European Committee for Standardisation (CEN), Brussels.
21. Crisafulli, F. J., Carr, A. J., & Park, R. (1995, November). Shear strength of unreinforced masonry panels. In Proceedings of the Pacific Conference on Earthquake Engineering (Vol. 3, pp. 77–86).
22. Drysdale RG, Hamid AA, Baker LR. Masonry Structures, Behavior and Design. Englewood Cliff: Prentice Hall Inc; 1994.
23. EN 1992–1–2, 2004. Eurocode 2: Design of Concrete Structures—Part 1–2: General Rules Structural Fire Design, European Committee for Standardisation (CEN), Brussels.
24. Bastami M, Aslani F, Omran M. High-temperature mechanical properties of concrete. Int J Civil Eng. 2010;8:337–51.
25. Mustafaraj E, Yardim Y. Review of strengthening techniques and mechanical testing for unreinforced masonry. Matter: Int J Sci Technol. 2017;3:33–50. https://doi.org/10.20319/mijst.2017.32.3350.10.20319/mijst.2017.32.3350 ↗
26. ISO 834-1 (1999) Fire-resistance tests—Elements of building construction—Part 1: General requirements, International Organization for Standardization (ISO), Geneva, Switzerland
27. Daware A, Naser MZ. Fire performance of masonry under various testing methods. Constr Build Mater. 2021;289:123183. https://doi.org/10.1016/j.conbuildmat.2021.123183.10.1016/j.conbuildmat.2021.123183 ↗
28. Beyazıt M, Yeğen Oğuz B. Statistics for engineers. Birsen Publishing; 2005.
29. Nacar S, Hınıs MA, Kankal M. Forecasting daily streamflow discharges using various neural network models and training algorithms. KSCE J Civ Eng. 2018;22(9):3676–85. https://doi.org/10.1007/s12205-017-1933-7.10.1007/s12205-017-1933-7 ↗