Non-traditional incremental forming technology: a review
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Kumar A. Critical state-of-the-art literature review of surface roughness in incremental sheet forming: a comparative analysis. Appl Surf Sci Adv. 2024. https://doi.org/10.1016/j.apsadv.2024.100625.10.1016/j.apsadv.2024.100625 ↗
2. Sharma M, Bhattacharya A, Paul SK. Influence of single point incremental forming on the low-cycle fatigue performance of AA6061-T6. Int J Fatigue. 2024. https://doi.org/10.1016/j.ijfatigue.2023.107994.10.1016/j.ijfatigue.2023.107994 ↗
3. E. LESZAK, “APPARATUS AND PROCESS FOR INCREMENTAL DIELESS FORMING,” Patent US3342051A (1967).
4. S. MATSUBARA, “Incremental Backward Bulge Forming of a Sheet Metal with a Hemispherical Head Tool,” Journal of the Japan Society for Technology of Plasticity, vol. 35, no. 406, p. 1311, 1994, Accessed: Nov. 23, 2024. [Online]. Available: https://cir.nii.ac.jp/crid/1570009749640194688.bib?lang=en
5. Trzepieciński T, Oleksik V, Pepelnjak T, Najm SM, Paniti I, Maji K. Emerging trends in single point incremental sheet forming of lightweight metals. Metals. 2021. https://doi.org/10.3390/met11081188.10.3390/met11081188 ↗
6. Liu Z, Li G. Single point incremental forming of Cu-Al composite sheets: a comprehensive study on deformation behaviors. Arch Civil Mech Eng. 2019;19(2):484–502. https://doi.org/10.1016/j.acme.2018.11.011.10.1016/j.acme.2018.11.011 ↗
7. Duflou JR, Habraken AM, Cao J, et al. Single point incremental forming: state-of-the-art and prospects. Int J Mater Form. 2018;11:743–73. https://doi.org/10.1007/s12289-017-1387-y.10.1007/s12289-017-1387-y ↗
8. Rodriguez-Alabanda O, Guerrero-Vaca G. Influence of single point incremental forming on the quality and surface properties of parts manufactured with aluminized steel sheets pre-coated with PTFE. CIRP J Manuf Sci Technol. 2022;38:215–29. https://doi.org/10.1016/j.cirpj.2022.04.014.10.1016/j.cirpj.2022.04.014 ↗
9. Mulay A, Hirani H, Choudhary SK. Numerical modeling and optimization with novel process parameters in the incremental forming of DC04 sheets. J Mater Eng Perform. 2023;32(5):2344–55. https://doi.org/10.1007/s11665-022-07263-9.10.1007/s11665-022-07263-9 ↗
10. K. Limpadapun, R. Kesvarakul, Y. Aue-u-lan, and T. Intarakumthornchai, “Lubricant Evaluation Technique for Single Point Incremental Forming Process,” Applied Science and Engineering Progress, 2021, https://doi.org/10.14416/j.asep.2021.11.00910.14416/j.asep.2021.11.009 ↗
11. Gohil AM, Modi BA. Review of the effect of process parameters on performance measures in the incremental sheet forming process. Proc Inst Mech Eng Part B J Eng Manuf. 2021;235(3):303–32. https://doi.org/10.1177/0954405420961215.10.1177/0954405420961215 ↗
12. Azhiri RB, Rahimidehgolan F, Javidpour F, Tekiyeh RM, Moussavifard SM, Bideskan AS. Optimization of single point incremental forming process using ball nose tool. Exp Tech. 2020;44(1):75–84. https://doi.org/10.1007/s40799-019-00338-8.10.1007/s40799-019-00338-8 ↗
13. Behera AK, de Sousa RA, Ingarao G, Oleksik V. Single point incremental forming: an assessment of the progress and technology trends from 2005 to 2015. J Manuf Process. 2017;27:37–62. https://doi.org/10.1016/j.jmapro.2017.03.014.10.1016/j.jmapro.2017.03.014 ↗
14. Y. A. Savaliya, “RESEARCH AND PROGRESS IN SINGLE POINT INCREMENTAL FORMING,” International Journal of Research in Mechanical Engineering, Vol. 5, no. 2, 2018. Available: https://researchscript.in/wp-content/uploads/2018/05/IJRME050206
15. Akhavan Farid A, Foong SS, Krejcar O, Namazi H. Complexity-based analysis of the effect of forming parameters on the surface finish of workpiece in single point incremental forming (Spif). Fractal Fract. 2021. https://doi.org/10.3390/fractalfract5040241.10.3390/fractalfract5040241 ↗
16. Szpunar M, Ostrowski R, Trzepieciński T, Kaščák L. Central composite design optimisation in single point incremental forming of truncated cones from commercially pure titanium grade 2 sheet metals. Materials. 2021;14(13):3634. https://doi.org/10.3390/ma14133634.10.3390/ma14133634 ↗
17. Kumar N, Belokar RM. Effect of process parameters on surface finish in single point incremental forming process-a review. I-Manage J Mech Eng. 2019;9(1):44–51.
18. Bishnoi P, Chandna P. Formability of aluminum alloys during single point incremental forming: a review. Int J Manuf Mater Mech Eng. 2022;12(1):1–26. https://doi.org/10.4018/IJMMME.296277.10.4018/IJMMME.296277 ↗
19. Afonso D, de Alves Sousa R, Torcato R. Integration of design rules and process modelling within SPIF technology-a review on the industrial dissemination of single point incremental forming. Int J Adv Manuf Technol. 2018;94(9–12):4387–99. https://doi.org/10.1007/s00170-017-1130-3.10.1007/s00170-017-1130-3 ↗
20. Ai S, Long H. A review on material fracture mechanism in incremental sheet forming. Int J Adv Manuf Technol. 2019;104(1–4):33–61. https://doi.org/10.1007/s00170-019-03682-6.10.1007/s00170-019-03682-6 ↗
21. Stein P, Franke W, Von Elling M, Groche P. Forming behavior of paperboard in single point incremental forming. Bioresour. 2019;14(1):1731–64. https://doi.org/10.15376/biores.14.1.1731-1764.10.15376/biores.14.1.1731-1764 ↗
22. A. Boric, T. Pepelnjak, Z. Jurkovic, A. Borić, T. Pepelnjak, and Z. Jurković, “Single Point Incremental Forming of Polymers-a review of process parameters” Conference Paper, Sep. 2017 [Online]. Available: https://www.researchgate.net/publication/340024229
23. P. Kailasrao Bhoyar, P. K. Bhoyar, A. B. Borade, and S. V Bhalerao, “Application of Single Point Incremental Forming for Biomedical Implants: A Review,” International Journal for Engineering Applications and Technology, 2022, [Online]. Available: https://www.researchgate.net/publication/360014386
24. Nagargoje A, Kankar PK, Jain PK, Tandon P. Application of artificial intelligence techniques in incremental forming: a state-of-the-art review. J Intell Manuf. 2023;34:985–1002. https://doi.org/10.1007/s10845-021-01868-y.10.1007/s10845-021-01868-y ↗
25. Jurisevic B, Kuzman K, Junkar M. Water jetting technology: an alternative in incremental sheet metal forming. Int J Adv Manuf Technol. 2006;31(1–2):18–23. https://doi.org/10.1007/s00170-005-0176-9.10.1007/s00170-005-0176-9 ↗
26. Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H. Improved SPIF performance through dynamic local heating. Int J Mach Tools Manuf. 2008;48(5):543–9. https://doi.org/10.1016/j.ijmachtools.2007.08.010.10.1016/j.ijmachtools.2007.08.010 ↗
27. Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H. Laser assisted incremental forming: formability and accuracy improvement. CIRP Ann. 2007;56(1):273–6. https://doi.org/10.1016/j.cirp.2007.05.063.10.1016/j.cirp.2007.05.063 ↗
28. Fan G, Gao L, Hussain G, Wu Z. Electric hot incremental forming: a novel technique. Int J Mach Tools Manuf. 2008;48(15):1688–92. https://doi.org/10.1016/j.ijmachtools.2008.07.010.10.1016/j.ijmachtools.2008.07.010 ↗
29. Araghi BT, Manco GL, Bambach M, Hirt G. Investigation into a new hybrid forming process: incremental sheet forming combined with stretch forming. CIRP Ann. 2009;58(1):225–8. https://doi.org/10.1016/j.cirp.2009.03.101.10.1016/j.cirp.2009.03.101 ↗
30. Vanhulst M, Waumans S, Vanhove H, Duflou JR. Investigating intermediate shapes for multi-stage forming of cranial implants. J Manuf Process. 2024;127:1–8. https://doi.org/10.1016/j.jmapro.2024.07.126.10.1016/j.jmapro.2024.07.126 ↗
31. Skjoedt M, Silva MB, Martins PAF, Bay N. Strategies and limits in multi-stage single-point incremental forming. J Strain Anal Eng Des. 2010;45(1):33–44. https://doi.org/10.1243/03093247JSA574.10.1243/03093247JSA574 ↗
32. R. Malhotra, Y. Huang, L. Xue, J. Cao, and T. Belytschko, “An investigation on the accuracy of numerical simulations for single point incremental forming with continuum elements,” in AIP Conference Proceedings, pp. 221–227, 2010, https://doi.org/10.1063/1.345755510.1063/1.3457555 ↗
33. Hadoush A, van den Boogaard AH. Substructuring in the implicit simulation of single point incremental sheet forming. Int J Mater Form. 2009;2(3):181–9. https://doi.org/10.1007/s12289-009-0402-3.10.1007/s12289-009-0402-3 ↗
34. Duflou JR, Tunckol Y, Aerens R. Force analysis for single point incremental forming. Key Eng Mater. 2007;344:543–50. https://doi.org/10.4028/www.scientific.net/KEM.344.543.10.4028/www.scientific.net/KEM.344.543 ↗
35. Verbert J, Duflou JR, Lauwers B. Feature based approach for increasing the accuracy of the SPIF process. Key Eng Mater. 2007;344:527–34. https://doi.org/10.4028/www.scientific.net/KEM.344.527.10.4028/www.scientific.net/KEM.344.527 ↗
36. Obikawa T, Hakutani T, Sekine T, Numajiri S, Matsumura T, Yoshino M. Single-point incremental micro-forming of thin shell products utilizing high formability. J Adv Mech Des Syst Manuf. 2010;4(6):1145–56. https://doi.org/10.1299/jamdsm.4.1145.10.1299/jamdsm.4.1145 ↗
37. Buffa G, Campanella D, Fratini L. On the improvement of material formability in SPIF operation through tool stirring action. Int J Adv Manuf Technol. 2013;66(9–12):1343–51. https://doi.org/10.1007/s00170-012-4412-9.10.1007/s00170-012-4412-9 ↗
38. Xu D, Lu B, Cao T, Chen J, Long H, Cao J. A comparative study on process potentials for frictional stir- and electric hot-assisted incremental sheet forming. Procedia Eng. 2014;81:2324–9. https://doi.org/10.1016/j.proeng.2014.10.328.10.1016/j.proeng.2014.10.328 ↗
39. Vahdati M, Mahdavinejad R, Amini S. Investigation of the ultrasonic vibration effect in incremental sheet metal forming process. Proc Inst Mech Eng Part B J Eng Manuf. 2017;231(6):971–82. https://doi.org/10.1177/0954405415578579.10.1177/0954405415578579 ↗
40. Vahdati M, Mahdavinejad RA, Amini S. Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology. Int J Adv Des Manuf Technol. 2015;8(1):13–23.
41. Moradi M, Vahdati M, Amini S, Vahdati M, Mahdavinejad RA, Moradi M. Statistical analysis and optimization of factors affecting the surface roughness in the UVaSPIF process using response surface. J Adv Mater Process. 2015;3(1):15–28.
42. Xu D, Wu W, Malhotra R, Chen J, Lu B, Cao J. Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming. Int J Mach Tools Manuf. 2013;73:37–46. https://doi.org/10.1016/j.ijmachtools.2013.06.007.10.1016/j.ijmachtools.2013.06.007 ↗
43. Lu B, et al. Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool. Int J Mach Tools Manuf. 2014;85:14–29. https://doi.org/10.1016/j.ijmachtools.2014.04.007.10.1016/j.ijmachtools.2014.04.007 ↗
44. Azaouzi M, Lebaal N. Tool path optimization for single point incremental sheet forming using response surface method. Simul Model Pract Theory. 2012;24:49–58. https://doi.org/10.1016/j.simpat.2012.01.008.10.1016/j.simpat.2012.01.008 ↗
45. Behera AK, Verbert J, Lauwers B, Duflou JR. Tool path compensation strategies for single point incremental sheet forming using multivariate adaptive regression splines. CAD Comput Aided Des. 2013;45(3):575–90. https://doi.org/10.1016/j.cad.2012.10.045.10.1016/j.cad.2012.10.045 ↗
46. Behera AK, Lauwers B, Duflou JR. Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques. Int J Mater Form. 2015;8(4):517–32. https://doi.org/10.1007/s12289-014-1174-y.10.1007/s12289-014-1174-y ↗
47. Asghar J, Lingam R, Shibin E, Reddy NV. Tool path design for enhancement of accuracy in single-point incremental forming. Proc Inst Mech Eng B J Eng Manuf. 2014;228(9):1027–35. https://doi.org/10.1177/0954405413512812.10.1177/0954405413512812 ↗
48. Fu Z, Mo J, Han F, Gong P. Tool path correction algorithm for single-point incremental forming of sheet metal. Int J Adv Manuf Technol. 2013;64(9–12):1239–48. https://doi.org/10.1007/s00170-012-4082-7.10.1007/s00170-012-4082-7 ↗
49. Bahloul R, Arfa H, Belhadjsalah H. Application of response surface analysis and genetic algorithm for the optimization of single point incremental forming process. Key Eng Mater Trans Tech Publicat Ltd. 2013;554–557:1265–72. https://doi.org/10.4028/www.scientific.net/KEM.554-557.1265.10.4028/www.scientific.net/KEM.554-557.1265 ↗
50. Kurra S, Nasih HR, Regalla S, Gupta AK. Parametric study and multi-objective optimization in single-point incremental forming of extra deep drawing steel sheets. Proc Institut Mech Eng Part B: J Eng Manuf. 2016;230(5):825–37. https://doi.org/10.1177/0954405414564408.10.1177/0954405414564408 ↗
51. Alinaghian I, Ranjbar H, Beheshtizad MA. Forming limit investigation of AA6061 friction stir welded blank in a single point incremental forming process: RSM approach. Trans Indian Inst Met. 2017;70(9):2303–18. https://doi.org/10.1007/s12666-017-1093-y.10.1007/s12666-017-1093-y ↗
52. Marathe SP, Raval HK. Numerical investigation on forming behavior of friction stir tailor welded blanks (FSTWBs) during single-point incremental forming (SPIF) process. J Braz Soc Mech Sci Eng. 2019. https://doi.org/10.1007/s40430-019-1929-y.10.1007/s40430-019-1929-y ↗
53. Davarpanah MA, Malhotra R. Formability and failure modes in single point incremental forming of metal-polymer laminates. Procedia Manuf. 2018;26:343–8. https://doi.org/10.1016/j.promfg.2018.07.042.10.1016/j.promfg.2018.07.042 ↗
54. Honarpisheh M, Mohammadi Jobedar M, Alinaghian I. Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology. Int J Adv Manuf Technol. 2018;96(9–12):3069–80. https://doi.org/10.1007/s00170-018-1812-5.10.1007/s00170-018-1812-5 ↗
55. Abd Ali R, Chen W, Jin K, Bao Y, Hussein AW. Formability and failure analyses of Al/SUS bilayer sheet in single point incremental forming. Int J Adv Manuf Technol. 2019;105(7–8):2785–98. https://doi.org/10.1007/s00170-019-04470-y.10.1007/s00170-019-04470-y ↗
56. da Josue Silva P, Alvares AJ. Investigation of tool wear in single point incremental sheet forming. Proc Inst Mech Eng B J Eng Manuf. 2020;234(1–2):170–88. https://doi.org/10.1177/0954405419844653.10.1177/0954405419844653 ↗
57. Mugendiran V, Gnanavelbabu A. Comparison of plastic strains on AA5052 by single point incremental forming process using digital image processing. J Mech Sci Technol. 2017;31(6):2943–9. https://doi.org/10.1007/s12206-017-0537-y.10.1007/s12206-017-0537-y ↗
58. Fischer JD, Woodside MR, Gonzalez MM, Lutes NA, Bristow DA, Landers RG. Iterative learning control of single point incremental sheet forming process using digital image correlation. Procedia Manuf. 2019;34:940–9. https://doi.org/10.1016/j.promfg.2019.06.108.10.1016/j.promfg.2019.06.108 ↗
59. Gupta P, Jeswiet J. Manufacture of an aerospace component by single point incremental forming. Procedia Manuf. 2019;29:112–9. https://doi.org/10.1016/j.promfg.2019.02.113.10.1016/j.promfg.2019.02.113 ↗
60. Gupta P, Szekeres A, Jeswiet J. Design and development of an aerospace component with single-point incremental forming. Int J Adv Manuf Technol. 2019;103(9–12):3683–702. https://doi.org/10.1007/s00170-019-03622-4.10.1007/s00170-019-03622-4 ↗
61. Akrichi S, Abbassi A, Abid S, Ben yahia N. Roundness and positioning deviation prediction in single point incremental forming using deep learning approaches. Adv Mech Eng. 2019. https://doi.org/10.1177/1687814019864465.10.1177/1687814019864465 ↗
62. Oraon M, Sharma V. Predicting force in single point incremental forming by using artificial neural network. Int J Eng Trans A: Basics. 2018;31(1):88–95. https://doi.org/10.5829/ije.2018.31.01a.13.10.5829/ije.2018.31.01a.13 ↗
63. Mulay A, Ben BS, Ismail S, Kocanda A. Prediction of average surface roughness and formability in single point incremental forming using artificial neural network. Arch Civil Mech Eng. 2019;19(4):1135–49. https://doi.org/10.1016/j.acme.2019.06.004.10.1016/j.acme.2019.06.004 ↗
64. Li Y, Zhai W, Wang Z, Li X, Sun L, Li J, Zhao G. Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves. J Mater Res Technol. 2020;9(1):433–54. https://doi.org/10.1016/j.jmrt.2019.10.072.10.1016/j.jmrt.2019.10.072 ↗
65. Buffa G, Yamaguchi H, Gucciardi M, Pinard D, Fratini L. Magnetic field-assisted single-point incremental forming with a magnet ball tool. CIRP Ann. 2021;70(1):265–8. https://doi.org/10.1016/j.cirp.2021.04.089.10.1016/j.cirp.2021.04.089 ↗
66. Pinard D, Skelton DR, Gucciardi M, Buffa G, Fratini L, Yamaguchi H. Study of forming mechanics of magnetic field–assisted single point incremental forming. J Manuf Process. 2022;79:28–34. https://doi.org/10.1016/j.jmapro.2022.04.038.10.1016/j.jmapro.2022.04.038 ↗
67. Zhan X, An D, Chen J. A novel two-stage friction stir-assisted incremental sheet forming method for uniform microstructure and enhanced properties in aluminum alloys. Int J Mach Tools Manuf. 2022. https://doi.org/10.1016/j.ijmachtools.2022.103928.10.1016/j.ijmachtools.2022.103928 ↗
68. Zhu H, Ou H. Heat assisted friction stir incremental sheet forming of thermoplastics. J Mater Process Technol. 2024. https://doi.org/10.1016/j.jmatprotec.2024.118396.10.1016/j.jmatprotec.2024.118396 ↗
69. Cristino VAM, Pragana JPM, Bragança IMF, Silva CMA, Martins PAF. Groove stiffening of sheets by single point incremental forming. Proc Inst Mech Eng Part B J Eng Manuf. 2024;238(3):356–63. https://doi.org/10.1177/09544054221138180.10.1177/09544054221138180 ↗
70. Kumar N, Lingam R, Agrawal A. Enhancement of incremental forming process formability by using improved clamping and multi-stage deformation strategies. Int J Adv Manuf Technol. 2023;129(1–2):659–70. https://doi.org/10.1007/s00170-023-12298-w.10.1007/s00170-023-12298-w ↗
71. Almadani M, Guner A, Hassanin H, Essa K. Hot-air contactless single-point incremental forming. J Manuf Mater Process. 2023. https://doi.org/10.3390/jmmp7050179.10.3390/jmmp7050179 ↗
72. Almadani M, Guner A, Hassanin H, De Lisi M, Essa K. Contactless single point incremental forming: experimental and numerical simulation. Int J Adv Manuf Technol. 2023;129(11–12):5167–79. https://doi.org/10.1007/s00170-023-12401-1.10.1007/s00170-023-12401-1 ↗
73. Almadani M, Guner A, Hassanin H, Essa K. Optimisation of a novel hot air contactless single incremental point forming of polymers. J Manuf Process. 2024;117:302–14. https://doi.org/10.1016/j.jmapro.2024.02.042.10.1016/j.jmapro.2024.02.042 ↗
74. Su C, et al. The influence of forming path parameters on magnesium alloy multipass single-point incremental forming with hot vibratory assistance. Int J Adv Manuf Technol. 2024;134(3–4):1277–99. https://doi.org/10.1007/s00170-024-14164-9.10.1007/s00170-024-14164-9 ↗
75. G. Issa, K. Almaghout, A. Maloletov, and A. Klimchik, “A Multi-stage Single-Point Incremental Sheet Forming for Enhanced Homogeneous Thickness Distribution,” in 10th 2024 International Conference on Control, Decision and Information Technologies, CoDIT 2024, pp. 2307–2312, 2024, https://doi.org/10.1109/CoDIT62066.2024.10708410.10.1109/CoDIT62066.2024.10708410 ↗
76. Bambach M, Taleb Araghi B, Hirt G. Strategies to improve the geometric accuracy in asymmetric single point incremental forming. Prod Eng. 2009;3(2):145–56. https://doi.org/10.1007/s11740-009-0150-8.10.1007/s11740-009-0150-8 ↗
77. Vignesh G, Pandivelan C, Sathiya Narayanan C. Review on multi-stage incremental forming process to form vertical walled cup. Mater Today: Proceed. 2019;27:2297–302. https://doi.org/10.1016/j.matpr.2019.09.116.10.1016/j.matpr.2019.09.116 ↗
78. Harfoush A, Fan Z, Haapala KR. Experimental studies on multistage single point incremental forming of thin high carbon steel sheet. Int J Adv Manuf Technol. 2024;132(11–12):5585–96. https://doi.org/10.1007/s00170-024-13712-7.10.1007/s00170-024-13712-7 ↗
79. Buffa G, Gucciardi M, Fratini L, Micari F. Multi-directional vs. mono-directional multi-step strategies for single point incremental forming of non-axisymmetric components. J Manuf Process. 2020;55:22–30. https://doi.org/10.1016/j.jmapro.2020.03.055.10.1016/j.jmapro.2020.03.055 ↗
80. Li Z, Lu S, Chen P. Improvement of dimensional accuracy based on multistage single point incremental forming of a straight wall cylinder part. Int J Precis Eng Manuf. 2017;18(9):1281–6. https://doi.org/10.1007/s12541-017-0151-z.10.1007/s12541-017-0151-z ↗
81. Jeswiet J, Micari F, Hirt G, Bramley A, Duflou J, Allwood J. Asymmetric single point incremental forming of sheet metal. CIRP Ann. 2005;54(2):88–114. https://doi.org/10.1016/S0007-8506(07)60021-3.10.1016/S0007-8506(07)60021-3 ↗
82. Song X, Zhang J, Zhai W, Taureza M, Castagne S, Danno A. Numerical and experimental investigation on the deformation mechanism of micro single point incremental forming process. J Manuf Process. 2018;36:248–54. https://doi.org/10.1016/j.jmapro.2018.10.035.10.1016/j.jmapro.2018.10.035 ↗
83. Bansal A, Jiang B, Ni J. Die-less fabrication of miniaturized parts through single point incremental micro-forming. J Manuf Process. 2019;43:20–5. https://doi.org/10.1016/j.jmapro.2019.03.046.10.1016/j.jmapro.2019.03.046 ↗
84. Liu Z. Heat assisted incremental sheet forming: a state-of-the-art review. Int J Adv Manuf Technol. 2018;98(9–12):2987–3003. https://doi.org/10.1007/s00170-018-2470-3.10.1007/s00170-018-2470-3 ↗
85. Kulkarni SS, Mocko GM. Experimental investigation and finite element modeling of localized heating in convective heat assisted single-point incremental forming. Int J Adv Manuf Technol. 2020;107:945–57. https://doi.org/10.1007/s00170-020-05082-7.10.1007/s00170-020-05082-7 ↗
86. Saidi B, Giraud Moreau L, Cherouat A, Nasri R. Experimental and numerical study on warm single-point incremental sheet forming (WSPIF) of titanium alloy Ti–6Al–4V, using cartridge heaters. J Braz Soc Mech Sci Eng. 2020. https://doi.org/10.1007/s40430-020-02632-8.10.1007/s40430-020-02632-8 ↗
87. Al-Obaidi A, Kräusel V, Landgrebe D. Induction heating validation of dieless single-point incremental forming of AHSS. J Manuf Mater Process. 2017. https://doi.org/10.3390/jmmp1010005.10.3390/jmmp1010005 ↗
88. Choudhary S, Mulay A. Identification of forming limits of CP Titanium Gr 2 using electrically assisted warm ISF process. J Mater Eng Perform. 2024. https://doi.org/10.1007/s11665-024-10139-9.10.1007/s11665-024-10139-9 ↗
89. Zhang H, Chu X, Bao W, Gao J, Chen L. Microstructure evolution of AZ31B sheet deformed by electric hot temperature-controlled single point incremental forming. Mater Sci Eng A. 2021. https://doi.org/10.1016/j.msea.2021.141732.10.1016/j.msea.2021.141732 ↗
90. Adams D, Jeswiet J. Single-point incremental forming of 6061–T6 using electrically assisted forming methods. Proc Inst Mech Eng B J Eng Manuf. 2014;228(7):757–64. https://doi.org/10.1177/0954405413501670.10.1177/0954405413501670 ↗
91. Vahdani M, Mirnia MJ, Gorji H, Bakhshi-Jooybari M. Experimental investigation of formability and surface finish into resistance single-point incremental forming of Ti–6Al–4V titanium alloy using Taguchi design. Trans Indian Inst Met. 2019;72(4):1031–41. https://doi.org/10.1007/s12666-019-01577-4.10.1007/s12666-019-01577-4 ↗
92. Mohammadi A, Qin L, Vanhove H, Seefeldt M, Van Bael A, Duflou JR. Single point incremental forming of an aged AL-Cu-Mg alloy: influence of pre-heat treatment and warm forming. J Mater Eng Perform. 2016;25(6):2478–88. https://doi.org/10.1007/s11665-016-2055-y.10.1007/s11665-016-2055-y ↗
93. Göttmann A, et al. Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts. Prod Eng. 2011;5(3):263–71. https://doi.org/10.1007/s11740-011-0299-9.10.1007/s11740-011-0299-9 ↗
94. Mohammadi A, Vanhove H, Van Bael A, Duflou JR. Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions. Int J Mater Form. 2016;9(3):339–51. https://doi.org/10.1007/s12289-014-1203-x.10.1007/s12289-014-1203-x ↗
95. Mohammadi A, Vanhove H, Van Bael A, Weise D, Duflou JR. Formability enhancement in incremental forming for an automotive aluminium alloy using laser assisted incremental forming. Key Eng Mater. 2015;639:195–202. https://doi.org/10.4028/www.scientific.net/KEM.639.195.10.4028/www.scientific.net/KEM.639.195 ↗
96. Wang Z, Cai S, Chen J. Experimental investigations on friction stir assisted single point incremental forming of low-ductility aluminum alloy sheet for higher formability with reasonable surface quality. J Mater Process Technol. 2020. https://doi.org/10.1016/j.jmatprotec.2019.116488.10.1016/j.jmatprotec.2019.116488 ↗
97. Li M, Wu R, Cai S, Chang Z, Wang Z, Chen J. Experimental investigation on friction-stir-assisted incremental forming with synchronous bonding of aluminum alloy and steel sheets. J Mater Eng Perform. 2020;29(2):750–9. https://doi.org/10.1007/s11665-020-04600-8.10.1007/s11665-020-04600-8 ↗
98. Mingshun Y, Lang B, Yunbo L, Yan L, Qilong Y, Renfeng Z. Research on the radial accuracy of ultrasonic vibration-assisted single point incremental forming parts. Int J Aerosp Eng. 2019. https://doi.org/10.1155/2019/9809815.10.1155/2019/9809815 ↗
99. Bai L, Li Y, Yang M, Lin Y, Yuan Q, Zhao R. Modeling and analysis of single point incremental forming force with static pressure support and ultrasonic vibration. Materials. 2019. https://doi.org/10.3390/ma12121899.10.3390/ma12121899 ↗
100. Jing Z, Zheng J, Yang M, Li Y, Peng C, Zhao X. Hydrostatic support and ultrasonic vibration-assisted SPIF error and process parameter optimization study. Int J Adv Manuf Technol. 2024;135:1877–88. https://doi.org/10.1007/s00170-024-14521-8.10.1007/s00170-024-14521-8 ↗