journal article·2025-09-09Open access

Microstructure, mechanical parameters, and corrosion resistance of austenitic ductile iron castings

M. Bork, M. Górny, G. Palumbo, G. Angella, J. Marosz

Abstract

Abstract Austenitic ductile iron, also known as Ni-resist cast iron, belongs to the cast iron group, which is characterized by a high-nickel content ranging from 18% to 36% by weight. Although this level of nickel content significantly increases the production costs, it imparts numerous beneficial properties that justify the price. One notable property is its ability to operate across a wide temperature range, with a minimum service temperature of − 200 °C, and a maximum, depending on the grade, reaching up to 1050 °C. This family of high-quality alloys demonstrates mechanical properties, where grades without carbide-forming elements achieve elongation exceeding 40%. On the other hand, by adding Cr, which is a carbide-forming element, the Ni-resist cast iron’s plasticity decreases, while its corrosion resistance properties increase. However, a comprehensive investigation into the correlation between mechanical properties and corrosion resistance, particularly in relation to various nickel contents in the presence of Cr in high-nickel cast iron, is scarce. Therefore, the primary aim of this study was to elucidate the role of nickel content and chromium content in influencing the mechanical and corrosion resistance properties of austenitic ductile iron. The addition of 21, 25, 28, and 35 wt% of nickel with and without 2.5 wt% of chromium was investigated. Characterization of the materials was carried out using optical and scanning electron microscopy, static tensile tests, impact strength tests, and corrosion resistance assessments at room temperature in a 3.5 wt% NaCl solution. The investigation revealed a significant influence by changing the nickel and chromium content on the properties of high-nickel cast iron. In addition, it was proved that by controlling the content of these elements, the cast iron with establish properties can be achieved—depending on expected final properties, results show that it is possible to substitute part of the nickel content with smaller amount of chromium to get similar corrosion resistance properties and reduce the production costs, but it will influence to mechanical properties, which dependent on plasticity.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. American Foundrymen's Society. Ductile iron handbook, Des Plaines. 2nd ed. Illinois; 1993.
2. Mohd Rashidi M, Idris MH. The effects of solidification on the microstructure and mechanical properties of modified ductile Ni-resist iron with a high manganese content. Mater Sci Eng A. 2014. https://doi.org/10.1016/j.msea.2013.12.070.10.1016/j.msea.2013.12.070 ↗
3. Rashidi MM, Idris MH. Microstructure and mechanical properties of modified ductile Ni-resist with higher manganese content. Mater Sci Eng A. 2013. https://doi.org/10.1016/j.msea.2013.02.03810.1016/j.msea.2013.02.038 ↗
4. Moe G. Properties and applications of Ni-Resist and ductile Ni-Resist alloys. 2nd ed. Durham : Nickel Institute; 2022.
5. American Society for Metals. Metals handbook on properties and selection: iron and steel, vol. 1; 2005.
6. Alabbasian F, Boutorabi SMA, Kheirandish S. Effect of inoculation and casting modulus on the microstructure and mechanical properties of ductile Ni-resist cast iron. Mater Sci Eng, A. 2016. https://doi.org/10.1016/j.msea.2015.09.024.10.1016/j.msea.2015.09.024 ↗
7. Xiang S, Jonsson S, Zhu B, Odqvist J. Corrosion fatigue of austenitic cast iron Ni-Resist D5S and austenitic cast steel HK30 in argon and synthetic diesel exhaust at 800°. Int J Fatigue. 2020. https://doi.org/10.1016/j.ijfatigue.2019.105396.10.1016/j.ijfatigue.2019.105396 ↗
8. Nagode M, Längler F, Hack M. Damage operator based lifetime calculation under thermo-mechanical fatigue for application on Ni-resist D-5S turbine housing of turbocharger. Eng Fail Anal. 2011. https://doi.org/10.1016/j.engfailanal.2011.05.018.10.1016/j.engfailanal.2011.05.018 ↗
9. Domeij B, Diószegi A. A review of dendritic austenite in cast irons. Inter Metalcast. 2024;18:1968–81. https://doi.org/10.1007/s40962-023-01239-8.10.1007/s40962-023-01239-8 ↗
10. Górny M, Kawalec M, et al. Primary structure and graphite nodules in thin-walled high-nickel ductile iron castings. Metals. 2018. https://doi.org/10.3390/met8080649.10.3390/met8080649 ↗
11. Fatahalla N, AbuElEzz A, Semeida MC. Si and Ni as alloying elements to vary carbon equivalent of austenitic ductile cast iron: microstructure and mechanical properties. Mater Sci Eng A. 2009. https://doi.org/10.1016/j.msea.2008.10.019.10.1016/j.msea.2008.10.019 ↗
12. Bork M, Chulist R, Górny M, et al. The influence of nickel content on the structure parameters and magnetic properties of austenitic ductile iron castings. Arch Civ Mech Eng. 2025. https://doi.org/10.1007/s43452-025-01173-y.10.1007/s43452-025-01173-y ↗
13. ISO 6892-1:2019 Metallic materials—tensile testing—part 1: method of test at room temperature.
14. ISO 148-1:2019 Metallic materials—Charpy pendulum impact test—part 1: test method.
15. ASTM G102-23 Standard practice for calculation of corrosion rates and related information from electrochemical measurements.
16. Lelek-Borkowska U, Wróbel M, Marzec M, Kustra P, Milenin A. Mg–Ca surgical wires degradation in animal serum. Metall Mater Trans A. 2024. https://doi.org/10.1007/s11661-024-07387-8.10.1007/s11661-024-07387-8 ↗
17. Ma S, Xing J, He Y, Li Y, Huang Z, Liu G, et al. Microstructure and crystallography of M7C3 carbide in chromium cast iron. Mater Chem Phys. 2015. https://doi.org/10.1016/j.matchemphys.2015.05.008.10.1016/j.matchemphys.2015.05.008 ↗
18. Wiengmoon A, Chairuangsri T, Brown A, Brydson R, Edmonds DV, Pearce JTH. Microstructural and crystallographical study of carbides in 30 wt%Cr cast irons. Acta Mater. 2005. https://doi.org/10.1016/j.actamat.2005.05.019.10.1016/j.actamat.2005.05.019 ↗
19. ISO 945-1:2019 Microstructure of cast irons—part 1: graphite classification by visual analysis.
20. Angella G, Donnini R, Zanardi F. The correlation between solidification rates, microstructure integrity and tensile plastic behaviour in 4.2 wt% silicon strengthened ductile iron. Int J Cast Met Res. 2020;99:99. https://doi.org/10.1080/13640461.2020.1757917.10.1080/13640461.2020.1757917 ↗
21. Kocks UF, Mecking H. Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci. 2003. https://doi.org/10.1016/S0079-6425(02)00003-8.10.1016/S0079-6425(02)00003-8 ↗
22. Angella G, Zanardi F. Solid state phenomena, defects-driven plasticity: rationalization based on notch strengthening and continuous damage mechanics. Solid State Phenom. 2023. https://doi.org/10.4028/p-DE4q1j.10.4028/p-DE4q1j ↗
23. Angella G, Taloni M, Górny M, Tarasiuk J, Wronski S, Montanari R, et al. An insight into the defects-driven plasticity in ductile cast irons. Materials. 2023. https://doi.org/10.3390/ma16103748.10.3390/ma16103748 ↗
24. Rai A, Szczerba M, Karbowniczek J, Cichocki K, Krzyzanowski M, Bajda S, et al. Enhanced corrosion resistance of magnesium alloy via surface transfer of microwave-synthesized, non-toxic, and ultra-smooth nitrogen-doped amorphous carbon thin film. Appl Surf Sci. 2025. https://doi.org/10.1016/j.apsusc.2025.162847.10.1016/j.apsusc.2025.162847 ↗
25. Yaakob KI, Maarof MR, Rosnizan MA, Zalani MR, Ahmad AH. Evaluation of dendritic structure of modified ductile Ni-resist. J Adv Res Appl Mech. 2024. https://doi.org/10.37934/aram.130.1.159167.10.37934/aram.130.1.159167 ↗
26. Sun Y, Hu S, Xiao Z, You S, Zhao J, Lv Y. Effects of nickel on low-temperature impact toughness and corrosion resistance of high-ductility ductile iron. Mater Des. 2012. https://doi.org/10.1016/j.matdes.2012.03.039.10.1016/j.matdes.2012.03.039 ↗
27. Hemanth J. The solidification and corrosion behaviour of austempered chilled ductile iron. J Mater Process Technol. 2000. https://doi.org/10.1016/S0924-0136(00)00424-6.10.1016/S0924-0136(00)00424-6 ↗
28. Hsu C-H, Chen M-L. Corrosion behavior of nickel alloyed and austempered ductile irons in 3.5% sodium chloride. Corros Sci. 2010. https://doi.org/10.1016/j.corsci.2010.05.006.10.1016/j.corsci.2010.05.006 ↗
29. Yuan R, Gu Y, Wu H. Effect of surface volta potential of Cr-containing steel on uniform corrosion and pitting corrosion. Mater Corros. 2021. https://doi.org/10.1002/maco.202112493.10.1002/maco.202112493 ↗