journal article·2025-01-27Open access

Improving fire resistance of lightweight concrete facade elements by using fibers

Hatice Elif Beytekin, Yahya Kaya, Ali Mardani, Filiz Şenkal Sezer

Abstract

Abstract It is known that the most critical factor affecting fire resistance requirements in buildings is the building envelope, and therefore, improving the thermal properties of facade materials has become an important research area. In this context, studies examining the high temperature resistance properties of various facade materials have indicated that concrete has higher heat resistance compared to many facade materials. Lightweight concrete facade elements stand out for their structural durability and fire resistance at high temperatures. However, the different thermal expansion coefficients of aggregates and cement paste in concrete mixtures can lead to adverse outcomes under high temperatures, such as cracking or structural degradation. To mitigate these adverse effects, it has been suggested that adding fibers to lightweight concrete mixtures could enhance durability and improve fire resistance. This study investigated the effects of different fiber types, lengths, and usage rates on the high temperature resistance of lightweight concrete mixtures. In the experimental study, three different types of fibers—polypropylene, polyamide, and glass—were used in varying proportions of 0%, 0.25%, 0.5%, and 0.75% of the total volume. Polypropylene fibers were included at lengths of 3, 6, and 12 mm; polyamide fibers at 6 and 12 mm; and glass fibers at 13 and 25 mm. When observing the behavior of the mixtures under high temperatures, it was noted that mixtures with glass fibers performed best at 300 °C, while those with polypropylene fibers showed superior performance at 600 °C. This demonstrates the advantages of glass and polypropylene fibers in providing resilience at different temperature ranges. Furthermore, the optimal fiber usage rate for high temperature resistance was determined to be 0.25%. These findings highlight the importance of considering factors such as fiber type, length, and usage rate in the development of fire-resistant facade materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Roberts BC, Webber ME, Ezekoye OA. Why and how the sustainable building community should embrace fire safety. Curr Sustain Renew Energy Rep. 2016;3:121–37.
2. del Coz-Díaz JJ, Martínez-Martínez JE, Alonso-Martínez M, Rabanal FPÁ. Comparative study of lightweight and normal concrete composite slabs behaviour under fire conditions. Eng Struct. 2020;207: 110196.
3. Bao J, Zheng R, Zhang P, Cui Y, Xue S, Song Q, Ma Y. Thermal resistance, water absorption and microstructure of high-strength self-compacting lightweight aggregate concrete (HSSC-LWAC) after exposure to elevated temperatures. Constr Build Mater. 2023;365: 130071.
4. Lugaresi F, Kotsovinos P, Lenk P, Rein G. Review of the mechanical failure of non-combustible facade systems in fire. Constr Build Mater. 2022;361: 129506.10.1016/j.conbuildmat.2022.129506 ↗
5. Nguyen KT, Weerasinghe P, Mendis P, Ngo T. Performance of modern building façades in fire: a comprehensive review. Electron J Struct Eng. 2016;16:69–87.10.56748/ejse.16212 ↗
6. Bonner M, Rein G. Flammability and multi-objective performance of building façades: towards optimum design. Int J High-rise Buildings. 2018;7(4):363–374.
7. Zhang B, Lin X, Zhang YX, Zhang L. Microscale failure analysis of the ultra-high-performance polypropylene fibre reinforced concrete panel subjected to high thermal loading induced by fire exposure. Eng Struct. 2023;292: 116518.
8. Al-Sibahy A, Edwards R. Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: experimental, modelling and parametric studies. Constr Build Mater. 2012;31:174–87.10.1016/j.conbuildmat.2011.12.096 ↗
9. Amel CL, Kadri EH, Sebaibi Y, Soualhi H. Dune sand and pumice impact on mechanical and thermal lightweight concrete properties. Constr Build Mater. 2017;133:209–18.10.1016/j.conbuildmat.2016.12.043 ↗
10. Ali F, Nadjai A, Choi S. Numerical and experimental investigation of the behavior of high strength concrete columns in fire. Eng Struct. 2010;32(5):1236–43.10.1016/j.engstruct.2009.12.049 ↗
11. Kayali O. Fly ash lightweight aggregates in high performance concrete. Constr Build Mater. 2008;22(12):2393–9.10.1016/j.conbuildmat.2007.09.001 ↗
12. Go CG, Tang JR, Chi JH, Chen CT, Huang YL. Fire-resistance property of reinforced lightweight aggregate concrete wall. Constr Build Mater. 2012;30:725–33.10.1016/j.conbuildmat.2011.12.081 ↗
13. Beytekin HE, Kaya Y, Mardani A, Sezer FŞ. Effect of fiber type, size, and utilization rate on mechanical and thermal properties of lightweight concrete facade panels. Struct Concr. 2024;25:3824–40.10.1002/suco.202300826 ↗
14. Chung Y, ve Shin, HC,. Isıl genleşme katsayısının karakterizasyonu ve bunun Portland çimentolu beton kaplamaların performansına etkisi. Kanada İnşaat Mühendisliği Dergisi. 2011;38(2):175–83.
15. Abdellatief M, Wong LS, Din NM, Mo KH, Ahmed AN, El-Shafie A. Evaluating enhanced predictive modeling of foam concrete compressive strength using artificial intelligence algorithms. Mater Today Commun. 2024;40: 110022.
16. Yonggui W, Shuaipeng L, Hughes P, Yuhui F. Mechanical properties and microstructure of basalt fibre and nano-silica reinforced recycled concrete after exposure to elevated temperatures. Constr Build Mater. 2020;247: 118561.10.1016/j.conbuildmat.2020.118561 ↗
17. Beytekin HE, Şahin HG, Mardani A. Effect of recycled concrete aggregate utilization ratio on thermal properties of self-cleaning lightweight concrete facades. Sustainability. 2024;16(14):6056.10.3390/su16146056 ↗
18. Abd Ellatief M, Abadel AA, Federowicz K, Abd Elrahman M. Mechanical properties, high temperature resistance and microstructure of eco-friendly ultra-high performance geopolymer concrete: role of ceramic waste addition. Constr Build Mater. 2023;401: 132677.10.1016/j.conbuildmat.2023.132677 ↗
19. Humur G, Çevik A. Effects of hybrid fibers and nanosilica on mechanical and durability properties of lightweight engineered geopolymer composites subjected to cyclic loading and heating–cooling cycles. Constr Build Mater. 2022;326: 126846.10.1016/j.conbuildmat.2022.126846 ↗
20. Kalifa P, Chene G, Galle C. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure. Cem Concr Res. 2001;31(10):1487–99.10.1016/S0008-8846(01)00596-8 ↗
21. Beytekin HE, Biricik Altun Ö, Mardani A, Şenkal Sezer F. Innovative lightweight concrete: effect of fiber, bacteria and nanomaterials. Iran Polym J. 2024;33:1327–50.10.1007/s13726-024-01313-w ↗
22. Mardani e Mardani-Aghabaglou A, Özen S, Altun MG. Durability performance and dimensional stability of polypropylene fiber reinforced concrete. J Green Build. 2018;13(2):20–41.10.3992/1943-4618.13.2.20 ↗
23. Tan H, Guo Y, Zou F, Jian S, Ma B, Zhi Z. Effect of borax on rheology of calcium sulphoaluminate cement paste in the presence of polycarboxylate superplasticizer. Constr Build Mater. 2017;139:277–85.10.1016/j.conbuildmat.2017.02.005 ↗
24. Alarcon-Ruiz L, Platret G, Massieu E, Ehrlacher A. The use of thermal analysis in assessing the effect of temperature on a cement paste. Cem Conr Res. 2005;35:609–13.10.1016/j.cemconres.2004.06.015 ↗
25. Mardani-Aghabaglou A, Yüksel C, Hosseinnezhad H, Ramyar K. Performance of steel micro fiber reinforced mortar mixtures containing plain, binary and ternary cementitious systems. J Green Build. 2016;11(4):109–30.10.3992/jgb.11.4.109.1 ↗
26. Şahin HG, Mardani A, Beytekin HE. Effect of silica fume utilization on structural build-up, mechanical and dimensional stability performance of fiber-reinforced 3D printable concrete. Polymers. 2024;16(4):556.10.3390/polym16040556 ↗
27. Roslan AF, Awang H, Mydin MAO. Effects of various additives on drying shrinkage, compressive and flexural strength of lightweight foamed concrete (LFC). In: Advanced materials research, vol. 626. Wollerau: Trans Tech Publications Ltd; 2013. p. 594–604.
28. Wu T, Yang X, Wei H, Liu X. Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers. Constr Build Mater. 2019;199:526–39.10.1016/j.conbuildmat.2018.12.037 ↗
29. Latifi MR, Biricik Ö, Mardani Aghabaglou A. Effect of the addition of polypropylene fiber on concrete properties. J Adhes Sci Technol. 2022;36(4):345–69.10.1080/01694243.2021.1922221 ↗
30. Pettmann M, Beaucour AL, Eslami J, Tysmans T, Aggelis DG, Noumowe A. A comprehensive study of damage mechanisms in very lightweight aggregates concretes submitted to high temperatures. Constr Build Mater. 2023;404: 133251.10.1016/j.conbuildmat.2023.133251 ↗
31. Ahmed TW, Ali AAM, Zidan RS. Properties of high strength polypropylene fiber concrete containing recycled aggregate. Constr Build Mater. 2020;241: 118010.10.1016/j.conbuildmat.2020.118010 ↗
32. Paul SC, van Zijl GP, Šavija B. Effect of fibers on durability of concrete: a practical review. Materials. 2020;13(20):4562.10.3390/ma13204562 ↗
33. Yuan Z, Jia Y. Mechanical properties and microstructure of glass fiber and polypropylene fiber reinforced concrete: an experimental study. Constr Build Mater. 2021;266: 121048.10.1016/j.conbuildmat.2020.121048 ↗
34. Mardani-Aghabaglou A, Özen S, Altun MG. Durability performance and dimensional stability of polypropylene fiber reinforced concrete. J Green Build. 2018;13(2):20–41.10.3992/1943-4618.13.2.20 ↗
35. Ouedraogo HA, Özen S, Kobya V, Sagiroglu S, Mardani-Aghabaglou A. Comparison of fresh and hardened properties of self-compacting concrete mixture from different aspect ratio of steel fiber view point. J Green Build. 2021;16(1):115–38.10.3992/jgb.16.1.115 ↗
36. Libre NA, Shekarchi M, Mahoutian M, Soroushian P. Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice. Constr Build Mater. 2011;25(5):2458–64.10.1016/j.conbuildmat.2010.11.058 ↗
37. Kaya Y, Biricik Ö, Bayqra SH, Mardani A. Effect of fibre type and utilisation rate on dimensional stability and frost resistance of pavement mortar mixture. Int J Pavement Eng. 2023;24(1):2154351.10.1080/10298436.2022.2154351 ↗
38. Nguyen LH, Beaucour AL, Ortola S, Noumowé A. Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete. Constr Build Mater. 2014;51:121–32.10.1016/j.conbuildmat.2013.11.019 ↗
39. Özen S, Altun MG, Mardani-Aghabaglou A, Ramyar K. Effect of main and side chain length change of polycarboxylate-ether-based water-reducing admixtures on the fresh state and mechanical properties of cementitious systems. Struct Concr. 2021;22:E607–18.10.1002/suco.201900489 ↗
40. Mardani-Aghabaglou A, İlhan M, Özen S. The effect of shrinkage reducing admixture and polypropylene fibers on drying shrinkage behaviour of concrete. Cement-Wapno-Beton Cem Lime Concr. 2019;24(3):227–37.
41. Anwar Hossain KM. Macro-and microstructural investigations on strength and durability of pumice concrete at high temperature. J Mater Civ Eng. 2006;18(4):527–36.10.1061/(ASCE)0899-1561(2006)18:4(527) ↗
42. Altun MG, Özen S, Mardani-Aghabaglou A. Effect of side chain length change of polycarboxylate-ether–based high-range water–reducing admixture on properties of cementitious systems containing fly ash. J Mater Civ Eng. 2021;33(4):04021015.10.1061/(ASCE)MT.1943-5533.0003603 ↗
43. Yazici Ş, Mardani-Aghabaglou A. Effect of aggregate grain size distribution on properties of permeable concrete. J Fundam Appl Sci. 2017;9(1):323–38.10.4314/jfas.v9i1.20 ↗
44. Huang T, Yuan Q, Zuo S, Yao H, Zhang K, Wang Y, Shi C. Çimento hamurunun sertleşme sırasında sıcaklığa bağlı elastikiyeti üzerindeki fiziko-kimyasal etkiler. Çimento ve Beton Kompozitleri. 2022;134:104769.
45. Wu F, Yu Q, Liu C. Durability of thermal insulating bio-based lightweight concrete: Understanding of heat treatment on bio-aggregates. Constr Build Mater. 2021;269: 121800.
46. Biricik Ö, Bayqra SH, Kaya Y, Mardani A. Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature. Struct Concr. 2023;24(4):4733–50.10.1002/suco.202200961 ↗
47. Murali G, Abid SR, Karthikeyan K, Haridharan MK, Amran M, Siva A. Low-velocity impact response of novel prepacked expanded clay aggregate fibrous concrete produced with carbon nano tube, glass fiber mesh and steel fiber. Constr Build Mater. 2021;284: 122749.10.1016/j.conbuildmat.2021.122749 ↗
48. Li P, Wu H, Liu Y, Yang J, Fang Z, Lin B. Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete. Constr Build Mater. 2019;205:529–42.10.1016/j.conbuildmat.2019.01.212 ↗