Problems related to the operation of machines and devices for the production of ceramic roof tiles with a special consideration of the durability of tools for band extrusion
Source abstract
Abstract
Abstract This article performs a complex analysis of the production of ceramic roof tiles from a plastic mass based mainly on clay with additions, subjected to the successive stages of the process, in order to ultimately obtain a roof tile to be used in roofings. It discusses the most important aspects and parameters of production which affect the abrasive and tribological wear of the machine elements. Particularly the key elements of those devices on the roof tile production lines which are in direct contact with the extruded material have to be especially resistant to abrasive wear, which occurs as a result of contact with the extruded clay band. The wear of tools of this type is affected by many, often opposing, factors and physic and chemical phenomena. This makes the analysis of their wear difficult and complex, at the same time demonstrating the difficulties in a detailed analysis of such processes as well as the key technological parameters, especially in terms of the possibilities of applying numerical modeling. This article also performs a review of the materials used for the production of machine elements for roof tiles and their optimization in the aspect of a continuous development of the production technology. A special attention is mostly paid to the wear of machines and devices used for band extrusion as well as the possible directions of further development of the ceramic industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Engineering Technology and Methodologies · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Roofing materials market size, share and trends analysis report by product (asphalt shingles, concrete and clay tile roofs), by application (residential, non-residential), by region, and segment forecasts, 2022–2030
2. Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. Global energy consumption due to friction and wear in the mining industry. Tribol Int. 2017;115:116–39. https://doi.org/10.1016/j.triboint.2017.05.010.10.1016/j.triboint.2017.05.010 ↗
3. Backalic Z, Ranogajec J, Marinkovic-Neducin R, Vrebalov M, Radeka M. Methodology of discovering and control of clay roofing tile textural inhomogenities. J Eur Ceram Soc. 2007;27:1865–70.10.1016/j.jeurceramsoc.2006.05.005 ↗
4. Wiedmann W, Holzel M. Twin-screw extruders in ceramic extrusion extrusion in ceramics. Muhlacker: Springer; 2007. p. 241–59.
5. Alves CL, Skorych V, De Noni A, Hotza D, González SYG, Heinrich S. Application of flowsheet simulation methodology to improve productivity and sustainability of porcelain tile manufacturing. Machines. 2023. https://doi.org/10.3390/machines11020137.10.3390/machines11020137 ↗
6. Hotza D, Maia BGO. Environmental performance and energy assessment of fired-clay brick masonry. In: Pacheco-Torgal F, Lourenço PB, Labrincha JA, Kumar S, Chindaprasirt P, editors. Eco-efficient masonry bricks and blocks. Elsevier; 2015, p. 447–59. https://doi.org/10.1016/B978-1-78242-305-8.00020-6.10.1016/B978-1-78242-305-8.00020-6 ↗
7. Dondi M, Raimondo M, Zanelli C. Clays and bodies for ceramic tiles: reappraisal and technological classification. Appl Clay Sci. 2014;96:91–109. https://doi.org/10.1016/j.clay.2014.01.013.10.1016/j.clay.2014.01.013 ↗
8. Bender W, Böger HH. A short history of the extruder in ceramics. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 85–128. https://doi.org/10.1007/978-3-540-27102-4_5.10.1007/978-3-540-27102-4_5 ↗
9. Benbow JJ, Bridgwater J. The cutting of paste extrudates. Chem Eng Sci. 1993;48:3088–91. https://doi.org/10.1016/0009-2509(93)80175-P.10.1016/0009-2509(93)80175-P ↗
10. Koçak A, Karasu B. Differences between dry and wet route tile production. El-Cezeri Fen ve Mühendislik Dergisi. 2019. https://doi.org/10.31202/ecjse.443880.10.31202/ecjse.443880 ↗
11. Casasola R, Rincón JM, Romero M. Glass–ceramic glazes for ceramic tiles: a review. J Mater Sci. 2012;47:553–82. https://doi.org/10.1007/s10853-011-5981-y.10.1007/s10853-011-5981-y ↗
12. Clay roofing tiles and fittings—product definitions and specifications (PN-EN 1304:2013-10). 2014.
13. Gates J, Bennet P, McInnes L, Tunstall B. The challenge of accurate prediction of industrial wear performance from laboratory tests, Sao Paulo, Brazil: 2018.
14. Rendón J, Olsson M. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear. 2009;267:2055–61. https://doi.org/10.1016/j.wear.2009.08.005.10.1016/j.wear.2009.08.005 ↗
15. Machado PC, Pereira JI, Sinatora A. Abrasion wear of austenitic manganese steels via jaw crusher test. Wear. 2021;476: 203726. https://doi.org/10.1016/j.wear.2021.203726.10.1016/j.wear.2021.203726 ↗
16. Jabłońska MB, Jasiak K, Kowalczyk K, Bednarczyk I, Skwarski M, Tkocz M, et al. Deformation behaviour of high-manganese steel with addition of niobium under quasi-static tensile loading. Mater Sci Pol. 2022;40:1–11. https://doi.org/10.2478/msp-2022-0029.10.2478/msp-2022-0029 ↗
17. Aragaw EM, Gärtner E, Schubert A. Combined laser hardening and laser surface texturing forming tool 12379. Procedia CIRP. 2020;94:914–8. https://doi.org/10.1016/j.procir.2020.09.072.10.1016/j.procir.2020.09.072 ↗
18. Razeghiyadaki A, Zhang D, Wei D, Perveen A. Optimization of polymer extrusion die based on response surface method. Processes. 2020;8:1043. https://doi.org/10.3390/pr8091043.10.3390/pr8091043 ↗
19. Karayel D. Simulation of direct extrusion process and optimal design of technological parameters using FEM and artificial neural network. KEM. 2008;367:185–92. https://doi.org/10.4028/www.scientific.net/KEM.367.185.10.4028/www.scientific.net/KEM.367.185 ↗
20. Zwolak M, Śliwa R. Analysis of the influence of dies geometry on the process extrusion force and properties of the extrudate obtained in the process of cold extrusion of 7075 aluminium alloy by the KOBO method. Mater Sci Pol. 2024;42:92–106. https://doi.org/10.2478/msp-2024-0008.10.2478/msp-2024-0008 ↗
21. Hawryluk M, Marzec J, Madej Ł, Perzyński K, Dudkiewicz Ł. A preliminary study on developing a material model based on a mixture of clay and ceramic flour intended for the extrusion of bands for ceramic roof tiles to establish a numerical model for the load on forming tools, Brno, Czech Republic. 2024.10.37904/metal.2024.4931 ↗
22. Händle F. What do we understand by extrusion in ceramics? The art of ceramic extrusion. Cham: Springer International Publishing; 2019. p. 5–15. https://doi.org/10.1007/978-3-030-05255-3_2.10.1007/978-3-030-05255-3_2 ↗
23. Extruders type tecno. Bongioanni Machine Heavy Clay Technology. https://bongioannimacchine.it/heavy_clay_technology/en/machines/28-extruders-type-tecno.html. Accessed 26 Feb 2024
24. Händle—shaping and extruding. HÄNDLE. https://www.haendle.com/haendle/produkte/formgeben-extrudieren/vakuumaggregate/?lang=en. Accessed 5 Mar 2024
25. Szczygielski W. Building ceramics raw materials. Warsaw: Polish Geological Institute National Research Institute; 2022.
26. Baki VA, Ke X, Heath A, Calabria-Holley J, Terzi C. Improving the pozzolanic reactivity of clay, marl and obsidian through mechanochemical or thermal activation. Mater Struct. 2024;57:9. https://doi.org/10.1617/s11527-023-02280-z.10.1617/s11527-023-02280-z ↗
27. Guzlena S, Sakale G, Certoks S, Grase L. Sand size particle amount influence on the full brick quality and technical properties. Constr Build Mater. 2019;220:102–9. https://doi.org/10.1016/j.conbuildmat.2019.05.170.10.1016/j.conbuildmat.2019.05.170 ↗
28. Gates JD, Dargusch MS, Walsh JJ, Field SL, Hermand MJ-P, Delaup BG, et al. Effect of abrasive mineral on alloy performance in the ball mill abrasion test. Wear. 2008;265:865–70. https://doi.org/10.1016/j.wear.2008.01.008.10.1016/j.wear.2008.01.008 ↗
29. Vakalova TV, Revva IB. Use of zeolite rocks for ceramic bricks based on brick clays and clay loams with high drying sensitivity. Constr Build Mater. 2020;255: 119324. https://doi.org/10.1016/j.conbuildmat.2020.119324.10.1016/j.conbuildmat.2020.119324 ↗
30. Dondi M. Feldspathic fluxes for ceramics: sources, production trends and technological value. Resour Conserv Recycl. 2018;133:191–205. https://doi.org/10.1016/j.resconrec.2018.02.027.10.1016/j.resconrec.2018.02.027 ↗
31. Veiga Simão F, Chambart H, Vandemeulebroeke L, Cappuyns V. Incorporation of sulphidic mining waste material in ceramic roof tiles and blocks. J Geochem Explor. 2021;225: 106741. https://doi.org/10.1016/j.gexplo.2021.106741.10.1016/j.gexplo.2021.106741 ↗
32. Riaz MH, Khitab A, Ahmad S, Anwar W, Arshad MT. Use of ceramic waste powder for manufacturing durable and eco-friendly bricks. Asian J Civ Eng. 2020;21:243–52. https://doi.org/10.1007/s42107-019-00205-2.10.1007/s42107-019-00205-2 ↗
33. Dubale M, Vasić MV, Goel G, Kalamdhad A, Singh LB. Utilization of construction and demolition mix waste in the fired brick production: the impact on mechanical properties. Materials. 2022;16:262. https://doi.org/10.3390/ma16010262.10.3390/ma16010262 ↗
34. Zhang J, Li R, Nie D, Zhang Y. Preparation of building ceramic bricks using waste residue obtained by mutual treatment of electrolytic manganese residue and red mud. Ceram Int. 2023;49:22492–505. https://doi.org/10.1016/j.ceramint.2023.04.083.10.1016/j.ceramint.2023.04.083 ↗
35. Andiç-Çakır Ö, Son AE, Sürmelioğlu S, Tosun E, Sarıkanat M. Improvement of traditional clay bricks’ thermal insulation characteristics by using waste materials. Case Stud Constr Mater. 2021;15: e00560. https://doi.org/10.1016/j.cscm.2021.e00560.10.1016/j.cscm.2021.e00560 ↗
36. Bresciani A. Shapting in ceramic technology—an overview. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 13–33. https://doi.org/10.1007/978-3-540-27102-4_2.10.1007/978-3-540-27102-4_2 ↗
37. Salehi M, Salem A. Effect of moisture content on extrusion process of kaolinitic–illitic clay in manufacturing of ceramic Raschig ring. J Mater Process Technol. 2008;200:232–7. https://doi.org/10.1016/j.jmatprotec.2007.09.013.10.1016/j.jmatprotec.2007.09.013 ↗
38. Bender W. Types of extrusion units. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 59–84. https://doi.org/10.1007/978-3-540-27102-4_4.10.1007/978-3-540-27102-4_4 ↗
39. Vitorino N, Freitas C, Ribeiro MJ, Abrantes JCC, Frade JR. Extrusion of ceramic emulsions: plastic behavior. Appl Clay Sci. 2014;101:315–9. https://doi.org/10.1016/j.clay.2014.08.021.10.1016/j.clay.2014.08.021 ↗
40. Vitorino N, Freitas C, Ribeiro MJ, Abrantes JCC, Frade JR. Porous hollow tubes processed by extrusion of ceramic emulsions. Appl Clay Sci. 2015;105–106:60–5. https://doi.org/10.1016/j.clay.2014.12.014.10.1016/j.clay.2014.12.014 ↗
41. Andrade FAD, Al-Qureshi HA, Hotza D. Measuring and modeling the plasticity of clays. Mater Res. 2010;13:395–9. https://doi.org/10.1590/S1516-14392010000300019.10.1590/S1516-14392010000300019 ↗
42. Lutz D. Scenarios of extrusion. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 173–86. https://doi.org/10.1007/978-3-540-27102-4_9.10.1007/978-3-540-27102-4_9 ↗
43. Berger H. Dies, pressure heads, strainer plates and more. In: Haendle F, editor. Extrusion in ceramics. Springer; 2009, p. 221–41.10.1007/978-3-540-27102-4_12 ↗
44. Leech DJ, Lightfoot S, Jorgensen T. Geometric pressure minimisation of a theoretical die for ceramic extrusion. 2020. https://doi.org/10.48550/ARXIV.2007.12588.10.48550/ARXIV.2007.12588 ↗
45. Kut S, Nowotyńska I. The effect of the extrusion ratio on load and die wear in the extrusion process. Materials. 2022;16:84. https://doi.org/10.3390/ma16010084.10.3390/ma16010084 ↗
46. Kocserha I, Kristály F. Effects of extruder head’s geometry on the properties of extruded ceramic products. MSF. 2010;659:499–504. https://doi.org/10.4028/www.scientific.net/MSF.659.499.10.4028/www.scientific.net/MSF.659.499 ↗
47. Chi XP, Yang S, Evans JRG. Extrusion pressure generated in high alumina content paste extrusion. In: 2010 international conference on manufacturing automation, Hong Kong, China: IEEE; 2010, p. 55–60. https://doi.org/10.1109/ICMA.2010.28.10.1109/ICMA.2010.28 ↗
48. Aguilella M, Foucard L, Mallol G, Sánchez MJ, López M, Benages R. Study and automatic control of the ceramic tile extrusion operation. Bol Soc Esp Ceram Vidr. 2012;51:83–8. https://doi.org/10.3989/cyv.122012.10.3989/cyv.122012 ↗
49. Bizhanov A, Kurunov I, Dalmia Y, Mishra B, Mishra S. Blast furnace operation with 100% extruded briquettes charge. ISIJ Int. 2015;55:175–82. https://doi.org/10.2355/isijinternational.55.175.10.2355/isijinternational.55.175 ↗
50. Redmann M. Evacuation technology for ceramic extrusion. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 281–94. https://doi.org/10.1007/978-3-540-27102-4_16.10.1007/978-3-540-27102-4_16 ↗
51. Händle F. Extrusion problems and how to solve them. In: Haendle F, editor. The art of ceramic extrusion. Cham: Springer International Publishing; 2019. p. 99–103. https://doi.org/10.1007/978-3-030-05255-3_13.10.1007/978-3-030-05255-3_13 ↗
52. Händle F. Ancillary equipment and accessories. In: Haendle F, editor. The art of ceramic extrusion. Cham: Springer International Publishing; 2019. p. 79–89. https://doi.org/10.1007/978-3-030-05255-3_11.10.1007/978-3-030-05255-3_11 ↗
53. Händle F. Laminations and chaos. In: Haendle F, editor. The art of ceramic extrusion. Cham: Springer International Publishing; 2019, p. 63–71. https://doi.org/10.1007/978-3-030-05255-3_9.10.1007/978-3-030-05255-3_9 ↗
54. Mantle MD, Bardsley MH, Gladden LF, Bridgwater J. Laminations in ceramic forming—mechanisms revealed by MRI. Acta Mater. 2004;52:899–909. https://doi.org/10.1016/j.actamat.2003.10.026.10.1016/j.actamat.2003.10.026 ↗
55. Bartusch R, Händle F. Laminations in extrusion. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 187–210. https://doi.org/10.1007/978-3-540-27102-4_10.10.1007/978-3-540-27102-4_10 ↗
56. Marzec J, Hawryluk M, Leśniewski T, Lachowicz M, Kuś A, Jabłońska M. Analysis of selected properties of steel used for tools forming a band assigned for the production of ceramic roofing tiles in the aspect of methods of prolonging the performance life, Brno, Czech Republic. 2024.10.37904/metal.2024.4941 ↗
57. Händle F. Wear, tear and no end. In: Haendle F, editor. The art of ceramic extrusion. Cham: Springer International Publishing; 2019. p. 113–20. https://doi.org/10.1007/978-3-030-05255-3_15.10.1007/978-3-030-05255-3_15 ↗
58. SSAB Explore the world of Hardox® wear plate. https://www.ssab.com/en/brands-and-products/hardox/download. Accessed 11 Mar 2024
59. Szala M, Szafran M, Macek W, Marchenko S, Hejwowski T. Abrasion resistance of S235, S355, C45, AISI 304 and Hardox 500 steels with usage of garnet, corundum and carborundum abrasives. Adv Sci Technol Res J. 2019;13:151–61. https://doi.org/10.12913/22998624/113244.10.12913/22998624/113244 ↗
60. Paengchit P, Saikaew C. Simulation of the influence of cutting speed and feed rate on tool life in hard turning of AISI 4140 steel. Mater Sci Pol. 2023;41:311–24. https://doi.org/10.2478/msp-2023-0021.10.2478/msp-2023-0021 ↗
61. Kannan PR, Thanigaivelan R, Thiraviam R, Pradeep KK. Performance studies on hybrid nano-metal matrix composites for wear and surface quality. Mater Sci Pol. 2023;41:288–300. https://doi.org/10.2478/msp-2023-0020.10.2478/msp-2023-0020 ↗
62. Ligier K, Zemlik M, Lemecha M, Konat Ł, Napiórkowski J. Analysis of wear properties of Hardox steels in different soil conditions. Materials. 2022;15:7622. https://doi.org/10.3390/ma15217622.10.3390/ma15217622 ↗
63. Ligier K, Napiórkowski J, Lemecha M. Effect of abrasive soil mass grain size on the steel wear process. Tribol Ind. 2020;42:165–76. https://doi.org/10.24874/ti.784.10.19.04.10.24874/ti.784.10.19.04 ↗
64. Hlavac L, Spadło S, Krajcarz D, Hlavacova I. Influence traverse speed on surface quality after water-jet cutting for Hardox steel, Brno, Czech Republic: 2015.
65. Konat Ł, Jasiński R, Białobrzeska B, Szczepański Ł. Analysis of the static and dynamic properties of wear-resistant Hardox 600 steel in the context of its application in working elements. Mater Sci Pol. 2021;39:86–102. https://doi.org/10.2478/msp-2021-0007.10.2478/msp-2021-0007 ↗
66. Marzec J, Hawryluk M, Rychlik M, Lachowicz MM, Suliga M. Preliminary studies of the durability of tools used to form ceramic tiles made of Hardox 600 and NC11LV steel. Materials. 2021;14:1262. https://doi.org/10.3390/ma14051262.10.3390/ma14051262 ↗
67. Hawryluk M, Marzec J, Lachowicz M, Makuła P, Nowak K. Evaluation of the possibility of improving the durability of tools made of X153CrMoV12 steel used in the extrusion of a clay band in ceramic roof tile production. Mater Sci Pol. 2023;41:94–109. https://doi.org/10.2478/msp-2023-0011.10.2478/msp-2023-0011 ↗
68. Berkowski L, Borkowski J. The influence of structure of the results of the nitriding of ledeburitic chromium steels. Part III. Heat treatment conditions of NC11LV steel. Obróbka Plastyczna Metali. 2007;XVIII:3–12.
69. Tool steels (ISO 4957:2018). 2018. https://www.iso.org/standard/70646.html. Accessed 14 Apr 2024
70. Singh S, Kumar R, Goel P, Singh H. Analysis of wear and hardness during surface hardfacing of alloy steel by thermal spraying, electric arc and TIG welding. Mater Today Proc. 2022;50:1599–605. https://doi.org/10.1016/j.matpr.2021.09.122.10.1016/j.matpr.2021.09.122 ↗
71. Koriuchev N, Kovtun O, Shehovsov D, Tkalenko I. Repair of worn-out parts of auger presses by surfacing method. EJENG. 2023;8:12–6. https://doi.org/10.24018/ejeng.2023.8.4.3072.10.24018/ejeng.2023.8.4.3072 ↗
72. Spalding MA, Womer TW, Campbell G. Rebuilding screws for injection molding processes, Orlando, USA. 2015.
73. Reisinger W. Measures for protection against abrasion on screws used in extruding ceramic compounds. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 321–9. https://doi.org/10.1007/978-3-540-27102-4_19.10.1007/978-3-540-27102-4_19 ↗
74. Dudek D, Stefańczyk K, Skowron E, Mijas R. Examination of chromium-based coating properties deposited by means of TIG. Mechanik. 2017. https://doi.org/10.17814/mechanik.2017.11.179.10.17814/mechanik.2017.11.179 ↗
75. Kamdi Z, Shipway PH, Voisey KT, Sturgeon AJ. Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type. Wear. 2011;271:1264–72. https://doi.org/10.1016/j.wear.2010.12.060.10.1016/j.wear.2010.12.060 ↗
76. Ivano-Frankivsk National Technical University of Oil and Gas, Ivanov OO, Prysyazhnyuk PM, Ivano-Frankivsk National Technical University of Oil and Gas, Lutsak DL, Ivano-Frankivsk National Technical University of Oil and Gas, et al. Increasing the durability of working elements of equipment for abrasive-containing masses processing. PT. 2019;93:14–21. https://doi.org/10.31891/2079-1372-2019-93-3-14-21.10.31891/2079-1372-2019-93-3-14-21 ↗
77. Prysyazhnyuk P, Ivanov O, Lutsak D, Lutsak L. Wear resistance improvement of equipment for production of building ceramics by hardfacing with flux-coerd electrodes based on Fe-Ti-B-C system. Multidiscip Asp Prod Eng. 2020;3:263–73. https://doi.org/10.2478/mape-2020-0023.10.2478/mape-2020-0023 ↗
78. Berkowski L, Borkowski J. The influence of structure on the results of the nitriding of ledeburitic chromium steels Part VIII Investigation of utilization properties of tool materials. Obróbka Plastyczna Metali. 2009;XX:3–16.
79. Aktaş B, Toprak M, Çalık A, Tekgüler A. Effect of pack-boriding on the tribological behavior of Hardox 450 and HiTuf Steels. Rev Adv Mater Sci. 2020;59:314–21. https://doi.org/10.1515/rams-2020-0030.10.1515/rams-2020-0030 ↗
80. Bernhart G, Lours P, Cutard T, Velay V, Nazaret F. Processes and equipment for superplastic forming of metals. In: Giuliano G, editor. Superplastic forming of advanced metallic materials. Elsevier; 2011. p. 49–71. https://doi.org/10.1533/9780857092779.1.49.10.1533/9780857092779.1.49 ↗
81. Zhao L, Zhou K, Tang D, Wang H, Li D, Peng Y. Experimental and numerical study on friction and wear performance of hot extrusion die materials. Materials. 2022;15:1798. https://doi.org/10.3390/ma15051798.10.3390/ma15051798 ↗
82. Akinci A, Sen S, Sen U. Friction and wear behavior of zirconium oxide reinforced PMMA composites. Compos B Eng. 2014;56:42–7. https://doi.org/10.1016/j.compositesb.2013.08.015.10.1016/j.compositesb.2013.08.015 ↗
83. New die for stiff extrusion. 2019. https://www.zi-online.info/en/artikel/zi_New_die_for_stiff_extrusion-3368094.html. Accessed 3 Apr 2024
84. Hawryluk M, Marzec J, Nowak K. Narzędzie do kształtowania pasma masy ceramicznej w procesie wytwarzania dachówek typu holenderskiego.
85. Vignes J, Schmidt F, Dusserre G, Dalmasso JF. Numerical simulation of extruded clay paste compression. Int J Mater Form. 2015;8:111–8. https://doi.org/10.1007/s12289-013-1152-9.10.1007/s12289-013-1152-9 ↗
86. Bouzakis K-D, Efstathiou K, Paradisiadis G, Tsouknidas A. Experimental and FEM-supported investigation of wet ceramic clay extrusion for the determination of stress distributions on the applied tools’ surfaces. J Eur Ceram Soc. 2008;28:2117–27. https://doi.org/10.1016/j.jeurceramsoc.2008.02.027.10.1016/j.jeurceramsoc.2008.02.027 ↗
87. Hawryluk M, Marzec J, Karczewska T, Dudkiewicz Ł. Determination of the characteristics and mechanical properties for soft materials based on plasticine and filia wax with inoculants. AIMSMATES. 2022;9:325–43. https://doi.org/10.3934/matersci.2022020.10.3934/matersci.2022020 ↗
88. Chairuddin F, Evelyn. Compression strength testing model on clay soil stabilization using variations of cement composition. IOP Conf Ser Mater Sci Eng. 2018;434:012192. https://doi.org/10.1088/1757-899X/434/1/012192.10.1088/1757-899X/434/1/012192 ↗
89. Wampers H. Perspectives for wear reduction with ceramic extruder components. In: Händle F, editor. Extrusion in ceramics. Berlin: Springer; 2009. p. 331–46. https://doi.org/10.1007/978-3-540-27102-4_20.10.1007/978-3-540-27102-4_20 ↗
90. Chadha K, Shahriari D, Jahazi M. An Approach to Develop Hansel-Spittel Constitutive Equation during Ingot Breakdown Operation of Low Alloy Steels. In: Muruganant M, Chirazi A, Raj B, editors. Frontiers in materials processing, applications, research and technology. Singapore: Springer Singapore; 2018. p. 239–46. https://doi.org/10.1007/978-981-10-4819-7_20.10.1007/978-981-10-4819-7_20 ↗
91. Bressan JD, Martins MM, Button ST. Extrusion analysis by the finite volume method. In: XII international conference on computational plasticity. Fundamentals and applications COMPLAS XII, Barcelona, Spain. 2013. https://doi.org/10.13140/2.1.2781.3123.10.13140/2.1.2781.3123 ↗
92. Wójcik M, Skrzat A. The coupled Eulerian–Lagrangian analysis of the KOBO extrusion process. Adv Sci Technol Res J. 2021;15:197–208. https://doi.org/10.12913/22998624/131663.10.12913/22998624/131663 ↗
93. Kathirgamanathan P, Neitzert T. Modelling of metal extrusion using ABAQUS. In: The proceedings of New Zealand metals industry. 2006. http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/8668. Accessed 7 Mar 2024
94. Ryzińska G, Skrzat A, Śliwa RE. Coupled Eulerian–Lagrangian approach in simulation of extrusion process. Metal Forming. 2015;XXVI:73–92.
95. Romanczuk-Ruszuk E, Sztorch B, Pakuła D, Gabriel E, Nowak K, Przekop RE. 3D printing ceramics—materials for direct extrusion process. Ceramics. 2023;6:364–85. https://doi.org/10.3390/ceramics6010022.10.3390/ceramics6010022 ↗
96. Chen Z, Li Z, Li J, Liu C, Lao C, Fu Y, et al. 3D printing of ceramics: a review. J Eur Ceram Soc. 2019;39:661–87. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013.10.1016/j.jeurceramsoc.2018.11.013 ↗
97. Hu F, Mikolajczyk T, Pimenov DY, Gupta MK. Extrusion-based 3D printing of ceramic pastes: mathematical modeling and in situ shaping retention approach. Materials. 2021;14:1137. https://doi.org/10.3390/ma14051137.10.3390/ma14051137 ↗
98. Revelo CF, Colorado HA. 3D printing of kaolinite clay ceramics using the direct ink writing (DIW) technique. Ceram Int. 2018;44:5673–82. https://doi.org/10.1016/j.ceramint.2017.12.219.10.1016/j.ceramint.2017.12.219 ↗
99. Ordoñez E, Gallego JM, Colorado HA. 3D printing via the direct ink writing technique of ceramic pastes from typical formulations used in traditional ceramics industry. Appl Clay Sci. 2019;182: 105285. https://doi.org/10.1016/j.clay.2019.105285.10.1016/j.clay.2019.105285 ↗
100. Revelo C, Colorado H. 3D printing of kaolinite clay with small additions of lime, fly ash and talc ceramic powders. PAC. 2019;13:287–99. https://doi.org/10.2298/PAC1903287R.10.2298/PAC1903287R ↗