Influence of progressive deposition on microstructure and mechanical properties of ER70S-6 in wire arc additive manufacturing process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Waqar S, Liu J, Sun Q, Guo K, Sun J. Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel. Rapid Prototyping J. 2020. https://doi.org/10.1108/RPJ-12-2019-0320.10.1108/RPJ-12-2019-0320 ↗
2. Elhadad AA, Rosa-Sainz A, Cañete R, Peralta E, Begines B, Balbuena M, et al. Applications and multidisciplinary perspective on 3D printing techniques: recent developments and future trends. Mater Sci Eng R Rep. 2023. https://doi.org/10.1016/j.mser.2023.100760.10.1016/j.mser.2023.100760 ↗
3. Das SC, Ranganathan R, Murugan N. Effect of build orientation on the strength and cost of PolyJet 3D printed parts. Rapid Prototyp J. 2018;24:832–9. https://doi.org/10.1108/RPJ-08-2016-0137.10.1108/RPJ-08-2016-0137 ↗
4. Singh R, Rishab JS, Sidhu. On three-dimensional printing of 17–4 precipitation-hardenable stainless steel with direct metal laser sintering in aircraft structural applications. Proc Inst Mech Eng Part L J Mater Des Appl. 2022;236:440–50. https://doi.org/10.1177/14644207211044804.10.1177/14644207211044804 ↗
5. Mahajan A, Singh G, Devgan S. Additive manufacturing of metallic biomaterials: a concise review. Arch Civil Mech Eng. 2023;23:187.10.1007/s43452-023-00730-7 ↗
6. Singh R, Sidhu JS, Rishab, Pabla BS, Kumar A. Three-dimensional printing of innovative intramedullary pin profiles with direct metal laser sintering. J Mater Eng Perform. 2022;31:240–53. https://doi.org/10.1007/s11665-021-06176-3.10.1007/s11665-021-06176-3 ↗
7. Sidhu JS, Misra A, Bhardwaj A. Development and evaluation of 3D printable conductive inks using F-MWCNTs/MWCNTs for direct ink writing of electronic circuits. J Mater Sci Mater Electron. 2024. https://doi.org/10.1007/s10854-024-13714-x.10.1007/s10854-024-13714-x ↗
8. Safai L, Cuellar JS, Smit G, Zadpoor AA. A review of the fatigue behavior of 3D printed polymers. Addit Manuf. 2019;28:87–97. https://doi.org/10.1016/j.addma.2019.03.023.10.1016/j.addma.2019.03.023 ↗
9. He F, Yuan L, Mu H, Ros M, Ding D, Li H, et al. Integrating human expertise to optimize the fabrication of parts with complex geometries in WAAM. J Manuf Syst. 2024;74:858–68. https://doi.org/10.1016/j.jmsy.2024.04.025.10.1016/j.jmsy.2024.04.025 ↗
10. Kaikai X, Yadong G, Qiang Z. Comparison of traditional processing and additive manufacturing technologies in various performance aspects: a review. Arch Civil Mech Eng. 2023;23:188.10.1007/s43452-023-00699-3 ↗
11. Tanwar RS, Jhavar S. Ti based alloys for aerospace and biomedical applications fabricated through wire + arc additive manufacturing (WAAM). Mater Today Proc. 2024;98:226–32. https://doi.org/10.1016/j.matpr.2023.11.121.10.1016/j.matpr.2023.11.121 ↗
12. Soni R, Jhavar S, Tyeb S, Gupta SK, Suwas S, Chatterjee K. Wire arc additive manufacturing of Zinc as a degradable metallic biomaterial. J Funct Biomater. 2022. https://doi.org/10.3390/jfb13040212.10.3390/jfb13040212 ↗
13. Shukla V, Kumar V, Dixit A. Microstructural characteristics and tensile properties of ER70S-6 manufactured by Robotic CMT wire-and-arc additive manufacturing. Mater Today Proc. 2023. https://doi.org/10.1016/j.matpr.2023.02.011.10.1016/j.matpr.2023.02.011 ↗
14. Langhi V, Palermo M, Gasparini G, Trombetti T. Computational design and manufacturing of a half-scaled 3D-printed stainless steel diagrid column. Addit Manuf. 2020;36:101505. https://doi.org/10.1016/j.addma.2020.101505.10.1016/j.addma.2020.101505 ↗
15. Saleh B, Fathi R, Tian Y, Radhika N, Jiang J, Ma A. Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends. Arch Civil Mech Eng. 2023;23:96.10.1007/s43452-023-00633-7 ↗
16. Kannan AR, Pramod R, Prakash KS, Shanmugam NS, Yoon J, Oliveira JP. Understanding the microstructural evolution and fatigue behavior of aluminum 2319 fabricated by wire arc additive manufacturing. Arch Civil Mech Eng. 2024;24:110.10.1007/s43452-024-00925-6 ↗
17. Horgar A, Fostervoll H, Nyhus B, Ren X, Eriksson M, Akselsen OM. Additive manufacturing using WAAM with AA5183 wire. J Mater Process Technol. 2018;259:68–74. https://doi.org/10.1016/j.jmatprotec.2018.04.014.10.1016/j.jmatprotec.2018.04.014 ↗
18. Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform. 2014;23:1917–28. https://doi.org/10.1007/s11665-014-0958-z.10.1007/s11665-014-0958-z ↗
19. Yi H, Qi L, Luo J, Zhang D, Li H, Hou X. Effect of the surface morphology of solidified droplet on remelting between neighboring aluminum droplets. Int J Mach Tools Manuf. 2018;130–131:1–11. https://doi.org/10.1016/j.ijmachtools.2018.03.006.10.1016/j.ijmachtools.2018.03.006 ↗
20. Ron T, Levy GK, Dolev O, Leon A, Shirizly A, Aghion E. Environmental behavior of low carbon steel produced by a wire arc additive manufacturing process. Metals. 2019. https://doi.org/10.3390/met9080888.10.3390/met9080888 ↗
21. Jafari D, Vaneker THJ, Gibson I. Wire and arc additive manufacturing: opportunities and challenges to control the quality and accuracy of manufactured parts. Mater Des. 2021;202:109471. https://doi.org/10.1016/j.matdes.2021.109471.10.1016/j.matdes.2021.109471 ↗
22. Li K, Yang T, Gong N, Wu J, Wu X, Zhang DZ, et al. Additive manufacturing of ultra-high strength steels: a review. J Alloys Compd. 2023;965:171390. https://doi.org/10.1016/j.jallcom.2023.171390.10.1016/j.jallcom.2023.171390 ↗
23. Vora J, Parmar H, Chaudhari R, Khanna S, Doshi M, Patel V. Experimental investigations on mechanical properties of multi-layered structure fabricated by GMAW-based WAAM of SS316L. J Mater Res Technol. 2022;20:2748–57. https://doi.org/10.1016/j.jmrt.2022.08.074.10.1016/j.jmrt.2022.08.074 ↗
24. Lee JY, An J, Chua CK. Fundamentals and applications of 3D printing for novel materials. Appl Mater Today. 2017;7:120–33. https://doi.org/10.1016/j.apmt.2017.02.004.10.1016/j.apmt.2017.02.004 ↗
25. Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P. Wire + arc additive manufacturing. Mater Sci Technol. 2016;32:641–7. https://doi.org/10.1179/1743284715Y.0000000073.10.1179/1743284715Y.0000000073 ↗
26. Ding D, Pan Z, van Duin S, Li H, Shen C. Fabricating superior NiAl bronze components through wire arc additive manufacturing. Materials. 2016. https://doi.org/10.3390/ma9080652.10.3390/ma9080652 ↗
27. Li F, Chen S, Wu Z, Yan Z. Adaptive process control of wire and arc additive manufacturing for fabricating complex-shaped components. Int J Adv Manuf Technol. 2018;96:871–9. https://doi.org/10.1007/s00170-018-1590-0.10.1007/s00170-018-1590-0 ↗
28. He T, Yu S, Shi Y, Dai Y. High-accuracy and high-performance WAAM propeller manufacture by cylindrical surface slicing method. Int J Adv Manuf Technol. 2019;105:4773–82. https://doi.org/10.1007/s00170-019-04558-5.10.1007/s00170-019-04558-5 ↗
29. Wu Q, Lu J, Liu C, Shi X, Ma Q, Tang S, et al. Obtaining uniform deposition with variable wire feeding direction during wire-feed additive manufacturing. Mater Manuf Process. 2017;32:1881–6. https://doi.org/10.1080/10426914.2017.1364860.10.1080/10426914.2017.1364860 ↗
30. Xu X, Ganguly S, Ding J, Guo S, Williams S, Martina F. Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process. Mater Charact. 2018;143:152–62. https://doi.org/10.1016/j.matchar.2017.12.002.10.1016/j.matchar.2017.12.002 ↗
31. Li Y, Han Q, Zhang G, Horváth I. A layers-overlapping strategy for robotic wire and arc additive manufacturing of multi-layer multi-bead components with homogeneous layers. Int J Adv Manuf Technol. 2018;96:3331–44. https://doi.org/10.1007/s00170-018-1786-3.10.1007/s00170-018-1786-3 ↗
32. Youheng F, Guilan W, Haiou Z, Liye L. Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel. Int J Adv Manuf Technol. 2017;91:301–13. https://doi.org/10.1007/s00170-016-9621-1.10.1007/s00170-016-9621-1 ↗
33. Rodrigues TA, Duarte V, Avila JA, Santos TG, Miranda RM, Oliveira JP. Wire and arc additive manufacturing of HSLA steel: effect of thermal cycles on microstructure and mechanical properties. Addit Manuf. 2019;27:440–50. https://doi.org/10.1016/j.addma.2019.03.029.10.1016/j.addma.2019.03.029 ↗
34. Rafieazad M, Nemani AV, Ghaffari M, Nasiri A. On microstructure and mechanical properties of a low-carbon low-alloy steel block fabricated by wire arc additive manufacturing. J Mater Eng Perform. 2021;30:4937–45. https://doi.org/10.1007/s11665-021-05568-9.10.1007/s11665-021-05568-9 ↗
35. Deshmukh PS, Tomar K, Sathiaraj GD, Palani IA. Optimum strength and ductility of pure copper fabricated by wire arc additive manufacturing. Manuf Lett. 2022;33:24–8. https://doi.org/10.1016/j.mfglet.2022.06.005.10.1016/j.mfglet.2022.06.005 ↗
36. Solomon IJ, Srinivas J, Leon SJ, Ramesh A, Rohith IJ, Senthil TS. Mechanical and microstructural investigation of multi-layered Inconel 825 wall fabricated using CMT-based WAAM. J Alloy Metall Syst. 2024;8:100115. https://doi.org/10.1016/j.jalmes.2024.100115.10.1016/j.jalmes.2024.100115 ↗
37. Bi X, Li R, Hu Z, Gu J, Jiao C. Microstructure and texture of 2205 duplex stainless steel additive parts fabricated by the cold metal transfer (CMT) wire and arc additive manufacturing (WAAM). Metals. 2022. https://doi.org/10.3390/met12101655.10.3390/met12101655 ↗
38. Ermakova A, Mehmanparast A, Ganguly S, Razavi J, Berto F. Fatigue crack growth behaviour of wire and arc additively manufactured ER70S-6 low carbon steel components. Int J Fract. 2022;235:47–59. https://doi.org/10.1007/s10704-021-00545-8.10.1007/s10704-021-00545-8 ↗
39. Persson BNJ. Surface roughness-induced stress concentration. Tribol Lett. 2023;71:1–19. https://doi.org/10.1007/s11249-023-01741-4.10.1007/s11249-023-01741-4 ↗
40. Colegrove PA, Coules HE, Fairman J, Martina F, Kashoob T, Mamash H, et al. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling. J Mater Process Technol. 2013;213:1782–91. https://doi.org/10.1016/j.jmatprotec.2013.04.012.10.1016/j.jmatprotec.2013.04.012 ↗
41. Rafieazad M, Ghaffari M, Vahedi Nemani A, Nasiri A. Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing. Int J Adv Manuf Technol. 2019;105:2121–34. https://doi.org/10.1007/s00170-019-04393-8.10.1007/s00170-019-04393-8 ↗
42. Guo Y, Quan G, Jiang Y, Ren L, Fan L, Pan H. Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding. J Magnes Alloy. 2021;9:192–201. https://doi.org/10.1016/j.jma.2020.01.003.10.1016/j.jma.2020.01.003 ↗
43. Dirisu P, Supriyo G, Martina F, Xu X, Williams S. Wire plus arc additive manufactured functional steel surfaces enhanced by rolling. Int J Fatigue. 2020. https://doi.org/10.1016/j.ijfatigue.2019.105237.10.1016/j.ijfatigue.2019.105237 ↗
44. Zherebtsov S, Semenova IP, Garbacz H, Motyka M. Chapter 6—Advanced mechanical properties. Amsterdam: Elsevier; 2019. https://doi.org/10.1016/B978-0-12-814599-9.00006-7.10.1016/B978-0-12-814599-9.00006-7 ↗
45. Ramachandramoorthy R, Kalácska S, Poras G, Schwiedrzik J, Edwards TEJ, Maeder X, et al. Anomalous high strain rate compressive behavior of additively manufactured copper micropillars. Appl Mater Today. 2022;27:101415. https://doi.org/10.1016/j.apmt.2022.101415.10.1016/j.apmt.2022.101415 ↗
46. Vahedi Nemani A, Ghaffari M, Nasiri A. Comparison of microstructural characteristics and mechanical properties of shipbuilding steel plates fabricated by conventional rolling versus wire arc additive manufacturing. Addit Manuf. 2020. https://doi.org/10.1016/j.addma.2020.101086.10.1016/j.addma.2020.101086 ↗
47. Ghose P, Gafur MA, Das SK, Chakraborty SR, Mohsin M, Deb AK, et al. Effects of flux concentrations and sintering temperature on dental porcelain. Eur Phys J Appl Phys. 2014. https://doi.org/10.1051/epjap/2014130378.10.1051/epjap/2014130378 ↗
48. Clark D, Bache MR, Whittaker MT. Shaped metal deposition of a nickel alloy for aero engine applications. J Mater Process Technol. 2008;203:439–48. https://doi.org/10.1016/j.jmatprotec.2007.10.051.10.1016/j.jmatprotec.2007.10.051 ↗
49. Liu S, Chen P, Xianchong S, Joo-Hock A, Yao X, Zhenglin D, et al. Mechanical performance of ER70S-6 low-carbon steel fabricated by wire arc additive manufacturing. Res Publ. 2023. https://doi.org/10.3850/978-981-18-6021-8_or-01-0075.html.10.3850/978-981-18-6021-8_or-01-0075.html ↗
50. Chen X, Li J, Cheng X, He B, Wang H, Huang Z. Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing. Mater Sci Eng A. 2017;703:567–77. https://doi.org/10.1016/j.msea.2017.05.024.10.1016/j.msea.2017.05.024 ↗
51. Niu F, Bi W, Zhang K, Sun X, Ma G, Wu D. Additive manufacturing of 304 stainless steel integrated component by hybrid WAAM and LDED. Mater Today Commun. 2023;35:106227. https://doi.org/10.1016/j.mtcomm.2023.106227.10.1016/j.mtcomm.2023.106227 ↗
52. Kikuchi M, Sucaria R, Souza G, Beltrami M. The influence of specimen surface roughness on tensile testing results (2018). https://doi.org/10.26678/abcm.cobem2017.cob17-1942.10.26678/abcm.cobem2017.cob17-1942 ↗
53. Liu D, Pons DJ. Crack propagation mechanisms for creep fatigue: a consolidated explanation of fundamental behaviours from initiation to failure. Metals. 2018. https://doi.org/10.3390/met8080623.10.3390/met8080623 ↗
54. Quan F, Chen Z, Ye H, Cui C, Cui Y. Study of the effect of surface roughness on fatigue strength of GH4169 based on indirect evaluation of the notch root radius. Int J Fatigue. 2021;152:106440. https://doi.org/10.1016/j.ijfatigue.2021.106440.10.1016/j.ijfatigue.2021.106440 ↗
55. Gupta MK, Singla AK, Ji H, Song Q, Liu Z, Cai W, et al. Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy. J Mater Res Technol. 2020;9:9506–22. https://doi.org/10.1016/j.jmrt.2020.06.090.10.1016/j.jmrt.2020.06.090 ↗
56. Pavlina EJ, Van Tyne CJ. Correlation of yield strength and tensile strength with hardness for steels. J Mater Eng Perform. 2008;17:888–93. https://doi.org/10.1007/s11665-008-9225-5.10.1007/s11665-008-9225-5 ↗
57. Meshref A, Mazen A, El-Giushi A. Influence of heat treatment temperature on the strain hardening exponent and strength coefficient of AISI 4140 alloy steel. Int J Eng Inf Syst. 2019;3:41–6.