journal article·2025-04-02

Strain-rate effect of mechanical properties on ultra high-performance concrete under impact loads: review and systematic analysis

Wanhui Feng, Jinhao Li, Jingen Guan, Jiahao Mai, Fei Yang, Song Li, Yongmin Yang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Ye M, Li L, Pei B, Yoo D-Y, Li H, Zhou C. A critical review on shear performance of joints in precast ultra-high-performance concrete (UHPC) segmental bridges. Eng Struct. 2024;301: 117224. https://doi.org/10.1016/j.engstruct.2023.117224.10.1016/j.engstruct.2023.117224 ↗
2. Xiao S, Yang J, Liu Z, Yang W, He J. Effects of steel fiber content on compressive properties and constitutive relation of ultra-high performance shotcrete (UHPSC). Buildings. 2024. https://doi.org/10.3390/buildings14061503.10.3390/buildings14061503 ↗
3. Cimesa M, Moustafa MA. UHPC modulus of elasticity: assessment and new developments using companion materials and structural data. Eng Struct. 2024;310: 118146. https://doi.org/10.1016/j.engstruct.2024.118146.10.1016/j.engstruct.2024.118146 ↗
4. Shakir QM, Hanoon HK. New models for reinforced concrete precast hybrid deep beams under static loads with curved hybridization. Structures. 2023;54:1007–25. https://doi.org/10.1016/j.istruc.2023.05.084.10.1016/j.istruc.2023.05.084 ↗
5. Shakir QM, Hannon HK, Farsangi EN. Enhancing the performance of precast hybrid concrete deep beams using curved and arched designs: experimental investigations. Structures. 2023;58: 105371. https://doi.org/10.1016/j.istruc.2023.105371.10.1016/j.istruc.2023.105371 ↗
6. Shakir QM, Hannon HK. Innovative model of precast RC curved hybrid deep beams composed partially with high-performance concrete. Arab J Sci Eng. 2024;49:6045–60. https://doi.org/10.1007/s13369-023-08592-0.10.1007/s13369-023-08592-0 ↗
7. Shakir QM, Abdlsaheb SD. Rehabilitation of partially damaged high strength RC corbels by EB FRP composites and NSM steel bars. Structures. 2022;38:652–71. https://doi.org/10.1016/j.istruc.2022.02.023.10.1016/j.istruc.2022.02.023 ↗
8. Way RT, Wille K. Effect of heat-induced chemical degradation on the residual mechanical properties of ultrahigh-performance fiber-reinforced concrete. J Mater Civ Eng. 2016;28:04015164. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001402.10.1061/(ASCE)MT.1943-5533.0001402 ↗
9. Habel K, Viviani M, Denarié E, Brühwiler E. Development of the mechanical properties of an ultra-high performance fiber reinforced concrete (UHPFRC). Cem Concr Res. 2006;36:1362–70. https://doi.org/10.1016/j.cemconres.2006.03.009.10.1016/j.cemconres.2006.03.009 ↗
10. Kodur VKR, Bhatt PP, Soroushian P, Arablouei A. Temperature and stress development in ultra-high performance concrete during curing. Constr Build Mater. 2016;122:63–71. https://doi.org/10.1016/j.conbuildmat.2016.06.052.10.1016/j.conbuildmat.2016.06.052 ↗
11. Ghafari E, Costa H, Júlio E. Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials. Constr Build Mater. 2015;101:201–8. https://doi.org/10.1016/j.conbuildmat.2015.10.066.10.1016/j.conbuildmat.2015.10.066 ↗
12. Matos AM, Granja J, Nunes S, Barroso-Aguiar JL, Azenha M. Hardening characterisation of a non-proprietary and more eco-friendly UHPC. Constr Build Mater. 2023;363: 129803. https://doi.org/10.1016/j.conbuildmat.2022.129803.10.1016/j.conbuildmat.2022.129803 ↗
13. Zhou F, Su Q, Cheng Y, Wu H. A novel dynamic constitutive model for UHPC under projectile impact. Eng Struct. 2023;280: 115711. https://doi.org/10.1016/j.engstruct.2023.115711.10.1016/j.engstruct.2023.115711 ↗
14. Zhao C, Ye X, He K, Gautam A. Numerical study and theoretical analysis on blast resistance of fabricated concrete slab. J Build Eng. 2020;32: 101760. https://doi.org/10.1016/j.jobe.2020.101760.10.1016/j.jobe.2020.101760 ↗
15. Tian S, Yan Q, Du X, Chen F, Zhang B. Experimental and numerical studies on the dynamic response of precast concrete slabs under blast load. J Build Eng. 2023;70: 106425. https://doi.org/10.1016/j.jobe.2023.106425.10.1016/j.jobe.2023.106425 ↗
16. Peng Q, Wu H, Jia PC, Ma LL. Dynamic behavior of UHPC member under lateral low-velocity impact: mesoscale analysis. Int J Impact Eng. 2023;172: 104418. https://doi.org/10.1016/j.ijimpeng.2022.104418.10.1016/j.ijimpeng.2022.104418 ↗
17. Murali G, Abid SR, Vatin NI, Amran M, Fediuk R. Influence of height and weight of drop hammer on impact strength and fracture toughness of two-stage fibrous concrete comprising nano carbon tubes. Constr Build Mater. 2022;349: 128782. https://doi.org/10.1016/j.conbuildmat.2022.128782.10.1016/j.conbuildmat.2022.128782 ↗
18. Wei J, Li W, Liu J, Li J, Wu C. Effect of stirrup ratio on response of ultra-high performance concrete beams subjected to low-velocity impact loadings. J Build Eng. 2024. https://doi.org/10.1016/j.jobe.2024.109799.10.1016/j.jobe.2024.109799 ↗
19. Li Q, Shi Z, Zhao F, Yu S, Xie K. Mechanical performance evaluation of steel fiber-reinforced concrete (FRC) based on multi-mechanical indicators from split hopkinson pressure bar (SHPB) test. J Build Eng. 2023;79: 107898. https://doi.org/10.1016/j.jobe.2023.107898.10.1016/j.jobe.2023.107898 ↗
20. Li J, Yang L, Xie H, Wei P, Li D, Xu Y, Zhang F. Research on impact toughness and crack propagation of basalt fiber reinforced concrete under SHPB splitting test. J Build Eng. 2023;77: 107445. https://doi.org/10.1016/j.jobe.2023.107445.10.1016/j.jobe.2023.107445 ↗
21. Ren L, Yu X, Guo Z, Xiao L. Numerical investigation of the dynamic increase factor of ultra-high performance concrete based on SHPB technology. Constr Build Mater. 2022;325: 126756. https://doi.org/10.1016/j.conbuildmat.2022.126756.10.1016/j.conbuildmat.2022.126756 ↗
22. Guo YB, Gao GF, Jing L, Shim VPW. Quasi-static and dynamic splitting of high-strength concretes – tensile stress–strain response and effects of strain rate. Int J Impact Eng. 2019;125:188–211. https://doi.org/10.1016/j.ijimpeng.2018.11.012.10.1016/j.ijimpeng.2018.11.012 ↗
23. Guo YB, Gao GF, Jing L, Shim VPW. Response of high-strength concrete to dynamic compressive loading. Int J Impact Eng. 2017;108:114–35. https://doi.org/10.1016/j.ijimpeng.2017.04.015.10.1016/j.ijimpeng.2017.04.015 ↗
24. Gan L, Liu Y, Zhang Z, Shen Z, Li L, Zhang H, Jin H, Xu W. Experimental investigation of the dynamic mechanical properties of concrete under different strain rates and cyclic loading. Case Stud Constr Mater. 2024;20: e02750. https://doi.org/10.1016/j.cscm.2023.e02750.10.1016/j.cscm.2023.e02750 ↗
25. Khosravani MR, Weinberg K. A review on split Hopkinson bar experiments on the dynamic characterisation of concrete. Constr Build Mater. 2018;190:1264–83. https://doi.org/10.1016/j.conbuildmat.2018.09.187.10.1016/j.conbuildmat.2018.09.187 ↗
26. Comit´e Euro-International du B´eton, Concrete structures under impact and impulsive loading, (1988).
27. Zhuang W, Li S, Yu Q. The effect of supplementary cementitious material systems on dynamic compressive properties of ultra-high performance concrete paste. Constr Build Mater. 2022;321: 126361. https://doi.org/10.1016/j.conbuildmat.2022.126361.10.1016/j.conbuildmat.2022.126361 ↗
28. Groeneveld AB, Ahlborn TM, Crane CK, Burchfield CA, Landis EN. Dynamic strength and ductility of ultra-high performance concrete with flow-induced fiber alignment. Int J Impact Eng. 2018;111:37–45. https://doi.org/10.1016/j.ijimpeng.2017.08.009.10.1016/j.ijimpeng.2017.08.009 ↗
29. Xiong Z, Fang Z, Feng W, Liu F, Yang F, Li L. Review of dynamic behaviour of rubberised concrete at material and member levels. J Build Eng. 2021;38: 102237. https://doi.org/10.1016/j.jobe.2021.102237.10.1016/j.jobe.2021.102237 ↗
30. Wang LL, Hu SS. Foundation of stress waves. 3rd ed. Beijing: National defense industry press; 2023.
31. Feng W, Chen B, Yang F, Liu F, Li L, Jing L, Li H. Numerical study on blast responses of rubberized concrete slabs using the Karagozian and case concrete model. J Build Eng. 2021;33: 101610. https://doi.org/10.1016/j.jobe.2020.101610.10.1016/j.jobe.2020.101610 ↗
32. Feng WH, Liu F, Yang F, Li LJ, Jing L, Chen BY, Yuan B. Experimental study on the effect of strain rates on the dynamic flexural properties of rubber concrete. Constr Build Mater. 2019;224:408–19. https://doi.org/10.1016/j.conbuildmat.2019.07.084.10.1016/j.conbuildmat.2019.07.084 ↗
33. Feng W, Liu F, Yang F, Jing L, Li L, Li H, Chen L. Compressive behaviour and fragment size distribution model for failure mode prediction of rubber concrete under impact loads. Constr Build Mater. 2021;273: 121767. https://doi.org/10.1016/j.conbuildmat.2020.121767.10.1016/j.conbuildmat.2020.121767 ↗
34. Zhang X, Yang ZJ, Huang YJ, Wang ZY, Chen XW. Micro CT image-based simulations of concrete under high strain rate impact using a continuum-discrete coupled model. Int J Impact Eng. 2021;149: 103775. https://doi.org/10.1016/j.ijimpeng.2020.103775.10.1016/j.ijimpeng.2020.103775 ↗
35. Feng W, Chen Z, Tang Y, Liu F, Yang F, Yang Y, Tayeh BA, Namdar A. Fracture characteristics of sustainable crumb rubber concrete under a wide range of loading rates. Constr Build Mater. 2022;359: 129474. https://doi.org/10.1016/j.conbuildmat.2022.129474.10.1016/j.conbuildmat.2022.129474 ↗
36. Salem S, Eissa E, Zarif E, Sherif S, Shazly M. Influence of moisture content on the concrete response under dynamic loading. Ain Shams Eng J (2022). https://api.semanticscholar.org/CorpusID:252362015.10.1016/j.asej.2022.101976 ↗
37. Feng W, Chen B, Tang Y, Wei W, He W, Yang Y. Structural effects and real strain-rate effects on compressive strength of sustainable concrete with crumb rubber in split Hopkinson pressure bar tests. Archiv Civil Mech Eng. 2022;22:136. https://doi.org/10.1007/s43452-022-00457-x.10.1007/s43452-022-00457-x ↗
38. Liu F, Li QM. Strain-rate effect of polymers and correction methodology in a SHPB test. Int J Impact Eng. 2022;161: 104109. https://doi.org/10.1016/j.ijimpeng.2021.104109.10.1016/j.ijimpeng.2021.104109 ↗
39. Othman H, Marzouk H, Sherif M. Effects of variations in compressive strength and fibre content on dynamic properties of ultra-high performance fibre-reinforced concrete. Constr Build Mater. 2019;195:547–56. https://doi.org/10.1016/j.conbuildmat.2018.11.093.10.1016/j.conbuildmat.2018.11.093 ↗
40. Liang X, Wu C, Yang Y, Li Z. Experimental study on ultra-high performance concrete with high fire resistance under simultaneous effect of elevated temperature and impact loading. Cement Concr Compos. 2019;98:29–38. https://doi.org/10.1016/j.cemconcomp.2019.01.017.10.1016/j.cemconcomp.2019.01.017 ↗
41. Zhang D, Li H, Tu H, Weng Y. Investigation on the quasi-static mechanical properties and dynamic compressive behaviors of ultra-high performance concrete with crumbed rubber powders. Mater Struct. 2022;55:104. https://doi.org/10.1617/s11527-022-01904-0.10.1617/s11527-022-01904-0 ↗
42. Liu K, Wu C, Li X, Liu J, Tao M, Fang J, Xu S. The influences of cooling regimes on fire resistance of ultra-high performance concrete under static-dynamic coupled loads. J Build Eng. 2021;44: 103336. https://doi.org/10.1016/j.jobe.2021.103336.10.1016/j.jobe.2021.103336 ↗
43. Pham TM, Davis J, Ha NS, Pournasiri E, Shi F, Hao H. Experimental investigation on dynamic properties of ultra-high-performance rubberized concrete (UHPRuC). Constr Build Mater. 2021;307: 125104. https://doi.org/10.1016/j.conbuildmat.2021.125104.10.1016/j.conbuildmat.2021.125104 ↗
44. Wu P, Liu Z, Wu C, Zhang H, Xu S, Su Y. Influence of steel fibre on dynamic compressive properties of ultra-high performance concrete. J Tianjin Univ (Sci Technol). 2017;50:939–45. https://doi.org/10.11784/tdxbz201607011.10.11784/tdxbz201607011 ↗
45. Wu P, Liu Z, Wu C, Su Y. Experimental study on influence of nano-particles on dynamic mechanical properties of ultra-high performance concrete. Bull Chin Ceram Soc. 2016;35:3546–55. https://doi.org/10.16552/j.cnki.issn1001-1625.2016.11.009.10.16552/j.cnki.issn1001-1625.2016.11.009 ↗
46. Feng T, Jiang J, Liu Z, Yue C, Wang F, Wu Y, Chu H. Impact compression mechanical properties of ultra-high performance concrete with manufactured sand. J Chin Ceram Soc. 2020;48:1177–87. https://doi.org/10.14062/j.issn.0454-5648.20200222.10.14062/j.issn.0454-5648.20200222 ↗
47. Su Y, Li J, Wu C, Wu P, Li Z-X. Effects of steel fibres on dynamic strength of UHPC. Constr Build Mater. 2016;114:708–18. https://doi.org/10.1016/j.conbuildmat.2016.04.007.10.1016/j.conbuildmat.2016.04.007 ↗
48. Wu Z, Shi C, He W, Wang D. Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements. Cem Concr Compos. 2017;79:148–57. https://doi.org/10.1016/j.cemconcomp.2017.02.010.10.1016/j.cemconcomp.2017.02.010 ↗
49. Hassan M, Wille K. Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique. Constr Build Mater. 2017;144:747–57. https://doi.org/10.1016/j.conbuildmat.2017.03.185.10.1016/j.conbuildmat.2017.03.185 ↗
50. Hassan M, Wille K. Comparative experimental investigations on the compressive impact behavior of fiber-reinforced ultra high-performance concretes using split Hopkinson pressure bar. Constr Build Mater. 2018;191:398–410. https://doi.org/10.1016/j.conbuildmat.2018.10.020.10.1016/j.conbuildmat.2018.10.020 ↗
51. Huang H, Gao X, Khayat KH. Contribution of fiber orientation to enhancing dynamic properties of UHPC under impact loading. Cem Concr Compos. 2021;121: 104108. https://doi.org/10.1016/j.cemconcomp.2021.104108.10.1016/j.cemconcomp.2021.104108 ↗
52. Lv Y, Wu H, Dong H, Zhao H, Li M, Huang F. Experimental and numerical simulation study of fiber-reinforced high strength concrete at high strain rates. J Build Eng. 2023;65: 105812. https://doi.org/10.1016/j.jobe.2022.105812.10.1016/j.jobe.2022.105812 ↗
53. Huang K, Xie J, Feng Y, Wang R, Ji J. Axial impact behaviors of UHPC: the roles of nanomaterials and steel fibres. Constr Build Mater. 2023;384: 131396. https://doi.org/10.1016/j.conbuildmat.2023.131396.10.1016/j.conbuildmat.2023.131396 ↗
54. Zhang W, Zhang Y, Zhang G. Single and multiple dynamic impacts behaviour of ultra-high performance cementitious composite. J Wuhan Univ Technol-Mater Sci Ed. 2011;26:1227–34. https://doi.org/10.1007/s11595-011-0395-x.10.1007/s11595-011-0395-x ↗
55. Wang Y, Wang Z, Liang X, An M. Experimental and numerical studies on dynamic compressive behavior of reactive powder concretes. Acta Mech Solida Sin. 2008;21:420–30. https://doi.org/10.1007/s10338-008-0851-0.10.1007/s10338-008-0851-0 ↗
56. Rong Z, Wang Y, Jiao M, Zhang J, Chen H. Impact compressive performance and damage evolution of ultra-high performance concrete. J Chin Ceram Soc. 2021;49:2322–30. https://doi.org/10.14062/j.issn.0454-5648.20210311.10.14062/j.issn.0454-5648.20210311 ↗
57. Wang R. Studies on the perparation, dynamic and static performance of ultra-high performance heavy concrete, Master’s degree thesis, Hunan University, 2020.
58. Noh HW, Lee S, Cho J-Y, Kim DJ. Investigating dynamic compressive strength of concrete by using high-rate hydraulic universal testing machine. Constr Build Mater. 2024;411: 134402. https://doi.org/10.1016/j.conbuildmat.2023.134402.10.1016/j.conbuildmat.2023.134402 ↗
59. Gary G, Bailly P. Behaviour of quasi-brittle material at high strain rate: experiment and modeling. Eur J Mech. 1998;17:403–20.10.1016/S0997-7538(98)80052-1 ↗
60. Yan D, Lin G. Influence of initial static stress on the dynamic properties of conerete. Cement Concr Compos. 2008;30:327–33.10.1016/j.cemconcomp.2007.11.004 ↗
61. Hao Y, Hao H, Jiang GP, Zhou Y. Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests. Cem Concr Res. 2013;52:63–70. https://doi.org/10.1016/j.cemconres.2013.05.008.10.1016/j.cemconres.2013.05.008 ↗
62. Zhang X, Chiu Y, Hao H, Cui J. Free water effect on the dynamic compressive properties of mortar. Cement Concr Compos. 2021;118: 103933. https://doi.org/10.1016/j.cemconcomp.2021.103933.10.1016/j.cemconcomp.2021.103933 ↗
63. Flores-Johnson EA, Li QM. Structural effects on compressive strength enhancement of concrete-like materials in a split Hopkinson pressure bar test. Int J Impact Eng. 2017;109:408–18. https://doi.org/10.1016/j.ijimpeng.2017.08.003.10.1016/j.ijimpeng.2017.08.003 ↗
64. Wang GS, Lu DC, Du XL. Research on the actual dynamic strength and the rate effect mechanisms for concrete materials. Eng Mech. 2018;35:28–67. https://doi.org/10.6052/j.issn.1000-4750.2017.02.0101.10.6052/j.issn.1000-4750.2017.02.0101 ↗
65. Kim J-C, Lim W-Y. Prediction of compressive strength and elastic modulus for ultra-high-performance concrete. Constr Build Mater. 2023;363: 129883. https://doi.org/10.1016/j.conbuildmat.2022.129883.10.1016/j.conbuildmat.2022.129883 ↗
66. Hou X, Cao S, Zheng W, Rong Q, Li G. Experimental study on dynamic compressive properties of fiber-reinforced reactive powder concrete at high strain rates. Eng Struct. 2018;169:119–30. https://doi.org/10.1016/j.engstruct.2018.05.036.10.1016/j.engstruct.2018.05.036 ↗
67. Ma J, Orgass M, Dehn F, Schmidt D, Tue NV. Comparative investigations on ultra high performance concrete with and without coarse aggregates. In: International symposium on ultra high performance concrete, Kassel, Germany, 2004: pp. 205–212.
68. Federal Highway Administration (FHWA), Structural design with ultra-high performance concrete, (2023).
69. Alsalman A, Kareem R, Dang CN, Martí-Vargas JR, Micah Hale W. Prediction of modulus of elasticity of UHPC using maximum likelihood estimation method. Structures. 2022;35:1308–20. https://doi.org/10.1016/j.istruc.2021.11.002.10.1016/j.istruc.2021.11.002 ↗
70. Aboukifa M, Moustafa MA. Reinforcement detailing effects on axial behavior of full-scale UHPC columns. J Build Eng. 2022;49: 104064. https://doi.org/10.1016/j.jobe.2022.104064.10.1016/j.jobe.2022.104064 ↗
71. Chen P, Liu C, Wang Y. Size effect on peak axial strain and stress-strain behavior of concrete subjected to axial compression. Constr Build Mater. 2018;188:645–55. https://doi.org/10.1016/j.conbuildmat.2018.08.072.10.1016/j.conbuildmat.2018.08.072 ↗
72. CEB-FIP, Model code for concrete structures, (2010).
73. Khan MM, Iqbal MA. Strain rate and size effects on dynamic tensile behaviour of standard and high-strength concrete: an experimental study. Structures. 2024;63: 106325. https://doi.org/10.1016/j.istruc.2024.106325.10.1016/j.istruc.2024.106325 ↗
74. Xia KW, Yu YC, Wang S, Wu BB, Xu Y, Cai YP. On the overload phenomenon in dynamic Brazilian disk experiments of rocks. Explos Shock Waves. 2021;41: 041403.
75. Wille K, Xu M, El-Tawil S, Naaman AE. Dynamic impact factors of strain hardening UHP-FRC under direct tensile loading at low strain rates. Mater Struct. 2016;49:1351–65. https://doi.org/10.1617/s11527-015-0581-y.10.1617/s11527-015-0581-y ↗
76. Tran NT, Kim DJ. Synergistic response of blending fibers in ultra-high-performance concrete under high rate tensile loads. Cement Concr Compos. 2017;78:132–45. https://doi.org/10.1016/j.cemconcomp.2017.01.008.10.1016/j.cemconcomp.2017.01.008 ↗
77. Zhang A, Liu K, Li J, Song R, Guo T. Static and dynamic tensile properties of ultra-high performance concrete (UHPC) reinforced with hybrid sisal fibers. Constr Build Mater. 2024;411: 134492. https://doi.org/10.1016/j.conbuildmat.2023.134492.10.1016/j.conbuildmat.2023.134492 ↗
78. Gurusideswar S, Shukla A, Jonnalagadda KN, Nanthagopalan P. Tensile strength and failure of ultra-high performance concrete (UHPC) composition over a wide range of strain rates. Constr Build Mater. 2020;258: 119642. https://doi.org/10.1016/j.conbuildmat.2020.119642.10.1016/j.conbuildmat.2020.119642 ↗
79. Park SH, Kim DJ, Kim SW. Investigating the impact resistance of ultra-high-performance fiber-reinforced concrete using an improved strain energy impact test machine. Constr Build Mater. 2016;125:145–59. https://doi.org/10.1016/j.conbuildmat.2016.08.027.10.1016/j.conbuildmat.2016.08.027 ↗
80. Park JK, Kim S-W, Kim DJ. Matrix-strength-dependent strain-rate sensitivity of strain-hardening fiber-reinforced cementitious composites under tensile impact. Compos Struct. 2017;162:313–24. https://doi.org/10.1016/j.compstruct.2016.12.022.10.1016/j.compstruct.2016.12.022 ↗
81. Ranade R, Li VC, Heard WF. Tensile rate effects in high strength-high ductility concrete. Cem Concr Res. 2015;68:94–104. https://doi.org/10.1016/j.cemconres.2014.11.005.10.1016/j.cemconres.2014.11.005 ↗
82. Fujikake K, Senga T, Ueda N, Ohno T, Katagiri M. Effects of strain rate on tensile behavior of reactive powder concrete. J Adv Concr Technol. 2006;4:79–84.10.3151/jact.4.79 ↗
83. Pyo S, Wille K, El-Tawil S, Naaman AE. Strain rate dependent properties of ultra high performance fiber reinforced concrete (UHP-FRC) under tension. Cement Concr Compos. 2015;56:15–24. https://doi.org/10.1016/j.cemconcomp.2014.10.002.10.1016/j.cemconcomp.2014.10.002 ↗
84. Chen M, Sun J, Zhang T, Shen Y, Zhang M. Enhancing the dynamic splitting tensile performance of ultra-high performance concrete using waste tyre steel fibres. J Build Eng. 2023;80: 108102. https://doi.org/10.1016/j.jobe.2023.108102.10.1016/j.jobe.2023.108102 ↗
85. Yang S, Tang Z, Zhong W, Wang S, Zhang R, Yao X. Effects of steel fibers on the dynamic properties and failure process of ultra-high performance concrete. J Build Eng. 2022;62: 105415. https://doi.org/10.1016/j.jobe.2022.105415.10.1016/j.jobe.2022.105415 ↗
86. Chen M, Yang F, Zhang T, Zhou L. Effect of elevated temperatures on behaviour of recycled steel and polypropylene fibre reinforced ultra-high performance concrete under dynamic splitting tension. J Build Eng. 2024;84: 108586. https://doi.org/10.1016/j.jobe.2024.108586.10.1016/j.jobe.2024.108586 ↗
87. Huang L, Su L, Xie J, Lu Z, Li P, Hu R, Yang S. Dynamic splitting behaviour of ultra-high-performance concrete confined with carbon-fibre-reinforced polymer. Compos Struct. 2022;284: 115155. https://doi.org/10.1016/j.compstruct.2021.115155.10.1016/j.compstruct.2021.115155 ↗
88. Yang Y, Wu C, Liu Z. Rate dependent behaviour of 3D printed ultra-high performance fibre-reinforced concrete under dynamic splitting tensile. Compos Struct. 2023;309: 116727. https://doi.org/10.1016/j.compstruct.2023.116727.10.1016/j.compstruct.2023.116727 ↗
89. Huo Y, Liu T, Lu D, Han X, Sun H, Huang J, Ye X, Zhang C, Chen Z, Yang Y. Dynamic tensile properties of steel fiber reinforced polyethylene fiber-engineered/strain-hardening cementitious composites (PE-ECC/SHCC) at high strain rate. Cement Concr Compos. 2023;143: 105234. https://doi.org/10.1016/j.cemconcomp.2023.105234.10.1016/j.cemconcomp.2023.105234 ↗
90. Dang VP, Kim DJ. Effects of nanoparticles on the tensile behavior of ultra-high-performance fiber-reinforced concrete at high strain rates. J Build Eng. 2023;63: 105513. https://doi.org/10.1016/j.jobe.2022.105513.10.1016/j.jobe.2022.105513 ↗
91. Li X, Zhang Y, Shi C, Chen X. Experimental and numerical study on tensile strength and failure pattern of high performance steel fiber reinforced concrete under dynamic splitting tension. Constr Build Mater. 2020;259: 119796. https://doi.org/10.1016/j.conbuildmat.2020.119796.10.1016/j.conbuildmat.2020.119796 ↗
92. Zhong H, Chen M, Zhang M. Effect of hybrid industrial and recycled steel fibres on static and dynamic mechanical properties of ultra-high performance concrete. Constr Build Mater. 2023;370: 130691. https://doi.org/10.1016/j.conbuildmat.2023.130691.10.1016/j.conbuildmat.2023.130691 ↗
93. Liang X, Wu C, Yang Y, Wu C, Li Z. Coupled effect of temperature and impact loading on tensile strength of ultra-high performance fibre reinforced concrete. Compos Struct. 2019;229: 111432. https://doi.org/10.1016/j.compstruct.2019.111432.10.1016/j.compstruct.2019.111432 ↗
94. Liu K, Song R, Li J, Guo T, Li X, Yang J, Yan Z. Effect of steel fiber type and content on the dynamic tensile properties of ultra-high performance cementitious composites (UHPCC). Constr Build Mater. 2022;342: 127908. https://doi.org/10.1016/j.conbuildmat.2022.127908.10.1016/j.conbuildmat.2022.127908 ↗
95. Marvar LE, Ross CA. Review of strain rate effects for concrete in tension. ACI Mater J. 1998;95:735–9.
96. Chen L, Xie P, Feng B, Hong J, Fang Q. A modified K&C model for concrete subjected to coupled effect of high temperature and high strain rate. Int J Impact Eng. 2023;181: 104760. https://doi.org/10.1016/j.ijimpeng.2023.104760.10.1016/j.ijimpeng.2023.104760 ↗
97. Ross CA, Jerome DM, Tedesco JW. Moisture and strain rate effects on concrete strength. ACI Mater J. 1996;93:293–300.
98. Chen L, Yue C, Zhou Y, Zhang J, Jiang X, Fang Q. Experimental and mesoscopic study of dynamic tensile properties of concrete using direct-tension technique. Int J Impact Eng. 2021;155: 103895. https://doi.org/10.1016/j.ijimpeng.2021.103895.10.1016/j.ijimpeng.2021.103895 ↗
99. Guo R, Ren H, Zhang L, Long Z, Jiang X, Wu X, Wang H. Direct dynamic tensile study of concrete materials based on mesoscale model. Int J Impact Eng. 2020;143: 103598. https://doi.org/10.1016/j.ijimpeng.2020.103598.10.1016/j.ijimpeng.2020.103598 ↗
100. Hassan M, Wille K. Direct tensile behavior of steel fiber reinforced ultra-high performance concrete at high strain rates using modified split Hopkinson tension bar. Compos B Eng. 2022;246: 110259. https://doi.org/10.1016/j.compositesb.2022.110259.10.1016/j.compositesb.2022.110259 ↗