Effect of Ti micro-addition on the hot tensile behaviour, microstructure and fractography of low-C high-manganese steels
Source abstract
Abstract
Abstract The aim of the work was to determine the effect of Ti micro-addition on the hot tensile behaviour, microstructure and fractography of two low-C high-manganese steels with additions of Si and Al. The hot tensile tests were performed using the Gleeble 3800 thermomechanical simulator. Samples were stretched at a temperature range from 1050 ℃ to 1200 ℃ at a strain rate of 2.5·10 3 s−1. The microstructure of the tested high-manganese steels under conditions of hot deformation was influenced by strain hardening and simultaneous dynamic recrystallization, as well as precipitation processes-depending on the chemical composition of the alloy and plastic deformation parameters. The analysis of the curves registered in the hot tensile tests indicated that a decrease of strain hardening was the result of the dynamic recrystallization. Hot tensile curves of the Ti-micro-alloyed steel were characterized by higher yield stress compared to the Ti-free steel. The Ti micro-addition with a concentration of 0.075 wt.% guaranteeing stable TiN-type nitrides eliminated the possibility of precipitating AlN-type nitrides and complex MnS-AlN type non-metallic inclusions, which are harmful to hot ductility. Fracture modes of the Ti-free steel showed a mixed nature from 1050 ℃ to 1150 °C, i.e. ductile fracture and numerous cavities and voids were identified. As the deformation temperature increased to 1200 °C, the fracture character was brittle with numerous inter-crystalline cracks along austenite grain boundaries. The addition of Ti improved significantly the hot ductility behaviour characterized by higher values of flow stress and reduction in area as well as ductile fracture modes in the entire high deformation temperature range.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Hilditch TB, De Souza T, Hodgson PD. Properties and automotive applications of advanced high-strength steels (AHSS). In: Welding and Joining of Advanced High Strength Steels (AHSS). Elsevier; 2015. p. 9–28.10.1016/B978-0-85709-436-0.00002-3 ↗
2. Bernhard M, Presoly P, Bernhard C, Hahn S, Ilie S. An assessment of analytical liquidus equations for Fe-C-Si-Mn-Al-P-alloyed steels using DSC/DTA techniques. Metall Mater Trans B. 2021;52:2821–30. https://doi.org/10.1007/s11663-021-02251-1.10.1007/s11663-021-02251-1 ↗
3. Sakuma Y, Matsumura O, Takechi H. Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn additions. Metall Trans A. 1991;22:489–98. https://doi.org/10.1007/BF02656816.10.1007/BF02656816 ↗
4. Jabłońska MB. Effect of the conversion of the plastic deformation work to heat on the behaviour of TWIP steels: a review. Arch Civ Mech Eng. 2023;23:135. https://doi.org/10.1007/s43452-023-00656-0.10.1007/s43452-023-00656-0 ↗
5. Grässel O, Frommeyer G. Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe–Mn–Si–AI steels. Mater Sci Technol. 1998;14:1213–7. https://doi.org/10.1179/mst.1998.14.12.1213.10.1179/mst.1998.14.12.1213 ↗
6. Grajcar A, Kciuk M, Topolska S, Płachcińska A. Microstructure and corrosion behavior of hot-deformed and ccold-strained high-Mn steels. J Mater Eng Perform. 2016;25:2245–54. https://doi.org/10.1007/s11665-016-2085-5.10.1007/s11665-016-2085-5 ↗
7. Kim JK, Chen L, Kim HS, Kim SK, Estrin Y, De Cooman BC. On the tensile behavior of high-manganese twinning induced plasticity steel. Metall Mater Trans A. 2009;40:3147–58. https://doi.org/10.1007/s11661-009-9992-0.10.1007/s11661-009-9992-0 ↗
8. Kim J, Lee SJ, De Cooman BC. Effect of Al on the stacking fault energy of Fe–18Mn–0.6C twinning-induced plasticity. Scr Mater. 2011;65:363–6. https://doi.org/10.1016/j.scriptamat.2011.05.014.10.1016/j.scriptamat.2011.05.014 ↗
9. Jabłońska MB, Śmiglewicz A, Niewielski G. The effect of strain rate on the mechanical properties and microstructure of the high-Mn steel after dynamic deformation tests. Arch Metall Mater. 2015;60:577–80. https://doi.org/10.1515/amm-2015-0176.10.1515/amm-2015-0176 ↗
10. Dumay A, Chateau JP, Allain S, Migot S, Bouaziz O. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel. Mater Sci Eng A. 2008;484:184–7. https://doi.org/10.1016/j.msea.2006.12.170.10.1016/j.msea.2006.12.170 ↗
11. Grajcar A, Opiela M, Fojt-Dymara G. The influence of hot-working conditions on a structure of high-manganese steel. Arch Civ Mech Eng. 2009;9:49–58. https://doi.org/10.1016/S1644-9665(12)60217-9.10.1016/S1644-9665(12)60217-9 ↗
12. Czerwinski F. Current trends in automotive lightweighting strategies and materials. Materials. 2021;14:6631. https://doi.org/10.3390/ma14216631.10.3390/ma14216631 ↗
13. Mintz B. The influence of composition on the hot ductility of steels and to the problem of transverse cracking. ISIJ Int. 1999;39:833–55. https://doi.org/10.2355/isijinternational.39.833.10.2355/isijinternational.39.833 ↗
14. Mintz B, Yue S, Jonas JJ. Hot ductility of steels and its relationship to the problem of transverse cracking during continuous casting. Int Mater Rev. 1991;36:187–220. https://doi.org/10.1179/imr.1991.36.1.187.10.1179/imr.1991.36.1.187 ↗
15. Kang SE, Tuling A, Banerjee JR, Gunawardana WD, Mintz B. Hot ductility of TWIP steels. Mater Sci Technol. 2011;27:95–100. https://doi.org/10.1179/026708309X12506933873387.10.1179/026708309X12506933873387 ↗
16. Kang SE, Tuling A, Lau I, Banerjee JR, Mintz B. The hot ductility of Nb/V containing high Al. TWIP steels, Mater Sci Technol. 2011;27:909–15. https://doi.org/10.1179/026708309X12595712305915.10.1179/026708309X12595712305915 ↗
17. Kocks UF, Argon AS, Ashby MF. Thermodynamics and kinetics of slip. 1st ed. Oxford, New York: Pergamon Press; 1975.
18. Kang SE, Banerjee JR, Mintz B. Influence of S and AlN on hot ductility of high Al. TWIP Steel Mater Sci Technol. 2012;28:589–96. https://doi.org/10.1179/1743284711Y.0000000109.10.1179/1743284711Y.0000000109 ↗
19. Abushosha R, Comineli O, Mintz B. Influence of Ti on hot ductility of C-Mn–Al steels. Mater Sci Technol. 1999;15:278–86. https://doi.org/10.1179/026708399101505842.10.1179/026708399101505842 ↗
20. Borrmann L, Senk D, Steenken B, Rezende JLL. Influence of cooling and strain rates on the hot ductility of high manganese steels within the system Fe–Mn–Al–C. Steel Res Int. 2021;92:2000346. https://doi.org/10.1002/srin.202000346.10.1002/srin.202000346 ↗
21. Liu H, Liu J, Wu B, Shen Y, He Y, Ding H, Su X. Effect of Mn and Al contents on hot ductility of high alloy Fe-xMn-C-yAl austenite TWIP steels. Mater Sci Eng A. 2017;708:360–74. https://doi.org/10.1016/j.msea.2017.10.001.10.1016/j.msea.2017.10.001 ↗
22. Wang Y, Zhao S, Song R, Hu B. Hot ductility behavior of a Fe-0.3C-9Mn-2Al medium Mn steel. Int J Miner Metall Mater. 2021;28:422–9. https://doi.org/10.1007/s12613-020-2206-x.10.1007/s12613-020-2206-x ↗
23. Zarandi F, Yue S. Effect of boron on the hot ductility of the Nb-microalloyed steel in austenite region. Metall Mater Trans A. 2006;37:2316–20. https://doi.org/10.1007/BF02586150.10.1007/BF02586150 ↗
24. Hamada AS, Karjalainen LP. Hot ductility behaviour of high-Mn TWIP steels. Mater Sci Eng A. 2011;528:1819–27. https://doi.org/10.1016/j.msea.2010.11.030.10.1016/j.msea.2010.11.030 ↗
25. Wang YN, Yang J, Wang RZ, Xin XL, Xu LY. Effects of non-metallic inclusions on hot ductility of high manganese TWIP steels containing different aluminum contents. Metall Mater Trans B. 2016;47:1697–712. https://doi.org/10.1007/s11663-016-0626-9.10.1007/s11663-016-0626-9 ↗
26. Qaban A, Mintz B, Kang SE, Naher S. Hot ductility of high Al TWIP steels containing Nb and Nb-V. Mater Sci Technol. 2017;33:1645–56. https://doi.org/10.1080/02670836.2017.1309097.10.1080/02670836.2017.1309097 ↗
27. Li D, Feng Y, Song S, Liu Q, Bai Q, Wu G, Lv N, Ren F. Influences of Nb-microalloying on microstructure and mechanical properties of Fe–25Mn–3Si–3Al TWIP steel. Mater Des. 2015;84:238–44. https://doi.org/10.1016/j.matdes.2015.06.092.10.1016/j.matdes.2015.06.092 ↗
28. Zamani D, Najafizadeh A, Monajati H, Razavi G. The Effect of Thermo-mechanical treatment and adding niobium and titanium on microstructure and mechanical properties of TWIP steel. Int J Appl Phys Math. 2011. https://doi.org/10.7763/IJAPM.2011.V1.38.10.7763/IJAPM.2011.V1.38 ↗
29. Kang SE, Kang MH, Mintz B. Influence of vanadium, boron and titanium on hot ductility of high Al. TWIP steels, Mater Sci Technol. 2021;37:42–58. https://doi.org/10.1080/02670836.2020.1861736.10.1080/02670836.2020.1861736 ↗
30. Kang SE, Banerjee JR, Maina EM, Mintz B. Influence of B and Ti on hot ductility of high Al and high Al Nb containing TWIP steels. Mater Sci Technol. 2013;27:1225–32. https://doi.org/10.1179/1743284713Y.0000000259.10.1179/1743284713Y.0000000259 ↗
31. Abushosha R, Vipond R, Mintz B. Influence of titanium on hot ductility of as cast steels. Mater Sci Technol. 1991;7:613–21. https://doi.org/10.1179/mst.1991.7.7.613.10.1179/mst.1991.7.7.613 ↗
32. Opiela M, Fojt-Dymara G, Grajcar A, Borek W. Effect of grain size on the microstructure and strain hardening behavior of solution heat-treated low-C high-Mn steel. Materials. 2020;13:1489. https://doi.org/10.3390/ma13071489.10.3390/ma13071489 ↗
33. Fojt-Dymara G, Opiela M, Borek W. Susceptibility of high-manganese steel to high-temperature cracking. Materials. 2022;15:8198. https://doi.org/10.3390/ma15228198.10.3390/ma15228198 ↗
34. Grässel O, Frommeyer G, Derder C, Hofmann H. Phase transformations and mechanical properties of Fe-Mn-Si-Al TRIP Steels. J Phys IV Fr. 1997. https://doi.org/10.1051/jp4:1997560.10.1051/jp4:1997560 ↗
35. Grässel O, Krüger L, Frommeyer G, Meyer LW. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development—properties—application. Int J Plast. 2000;16:1391–409. https://doi.org/10.1016/S0749-6419(00)00015-2.10.1016/S0749-6419(00)00015-2 ↗
36. Mejía I, Salas-Reyes AE, Bedolla-Jacuinde A, Calvo J, Cabrera JM. Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe–21Mn–1.3Al–1.5Si–0.5C TWIP steel. Mater Sci Eng A. 2014;616:229–39. https://doi.org/10.1016/j.msea.2014.08.030.10.1016/j.msea.2014.08.030 ↗