Review on role of electrical discharge drilling methods in fabricating micro holes: formation mechanism, defects characterization and mitigation strategies
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Wang W, Li L, Liu Z, Liu X, Bai X, Zang M, Zhang H. Research progress on improve quality of micro-hole processed by electrical discharge machining. Ordnance Mater Sci Eng. 2023;46:140–6.10.1016/j.msec.2014.10.019 ↗
2. Zhang Y. Fundamental research on electrochemical and discharge machining for micro hole. Nanjing: Nanjing University of Aeronautics and Astronautics; 2018.
3. Ying R, Zeng L, Gu D. Review of micro-hole machining technology. Mach Tool Hydraul. 2008;36:144–7.
4. Chen M, Zheng X, Dong D, Huang L, Wang X. Investigation of tool wear mechanism and tool geometry optimization in drilling of PCB fixture hole. Circuit World. 2013;39:195–203.10.1108/CW-06-2013-0021 ↗
5. Li C. Characteristics study of deep hole drilling tool system. X’ian: X’ian University of Technology; 2008.
6. Ma ZL, Wang QH, Liang YD, Cui ZJ, Meng FW, Chen LY. The mechanism and machinability of laser-assisted machining zirconia ceramics. Ceram Int. 2023;49(11):16971–84.10.1016/j.ceramint.2023.02.059 ↗
7. Lou ZZ, Yan YD, Wang JQ, Zhang AX, Cui HL, Li C, Geng YQ. Exploring the structural color of micro-nano composite gratings with FDTD simulation and experimental validation. Opt Express. 2024;32(2):2432–51.10.1364/OE.510400 ↗
8. Ma ZL, Wang QH, Chen H, Chen LY, Sheng Q, Wang ZX, Yu TB. A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic. J Mater Process Technol. 2022;302: 117492.
9. Xiang DD, Liu Y, Yu T, Wang D, Leng X, Wang K, Liu L, Pan J, Yao S, Chen Z. Review on wear resistance of laser cladding high-entropy alloy coatings. J Mater Process Technol. 2024;28:911–34.
10. Lohrengel MM, Rosenkranz C. Micro-electrochemical surface and product investigations during electrochemical machining (ECM) in NaNO3. Corros Sci. 2005;47:785–94.10.1016/j.corsci.2004.07.023 ↗
11. Kunieda M, Mizugai K, Watanabe S, Shibuya N, Iwamoto N. Electrochemical micromachining using flat electrolyte jet. CIRP Ann Manuf Technol. 2011;60:251–4.10.1016/j.cirp.2011.03.022 ↗
12. Jia J, Qu N, Fang X, Zeng Y. Investigation on electro stream drilling of micro-hole. Electromach Mould. 2011;2:129–32.
13. Gong S, Sun Y. Experimental study on forming consistent accuracy and tool electrode wear involved in fabricating array microelectrodes and array micro holes using electrical discharge machining. J Manuf Process. 2022;79:126–41.10.1016/j.jmapro.2022.04.046 ↗
14. Philip JT, Mathew J, Kuriachen BB. Transition from EDM to PMEDM-impact of suspended particulates in the dielectric on Ti6Al4V and other distinct material surfaces: a review. J Manuf Process. 2021;64:1105–42.10.1016/j.jmapro.2021.01.056 ↗
15. Yao S, Jin LY, Gong YD, Wen XL, Yin GQ, Wen Q, Tang BJ. Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM. J Manuf Process. 2022;73:799–814.10.1016/j.jmapro.2021.11.049 ↗
16. Rahim MZ, Li G, Ding S, Mo J, Brandt M. Electrical discharge grinding versus abrasive grinding in polycrystalline diamond machining-tool quality and performance analysis. Int J Adv Manuf Technol. 2016;85:263–77.10.1007/s00170-015-7935-z ↗
17. Zhang Y, Xu Z, Zhu Y, Zhu D. Effect of tube-electrode inner structure on machining performance in tube-electrode high-speed electrochemical discharge drilling. J Mater Process Technol. 2016;231:38–49.10.1016/j.jmatprotec.2015.12.012 ↗
18. Li Z, Bai J, Cao Y, Wang Y, Zhu G. Fabrication of microelectrode with large aspect ratio and precision machining of micro-hole array by micro-EDM. J Mater Process Technol. 2019;268:70–9.10.1016/j.jmatprotec.2019.01.009 ↗
19. Liew PJ, Yan J, Kuriyagawa T. Fabrication of deep micro-holes in reaction-bonded SIC by ultrasonic cavitation assisted Micro-EDM. Int J Mach Tool Manufact. 2014;76:13–20.10.1016/j.ijmachtools.2013.09.010 ↗
20. Gong S, Sun Y, Jin L, Su Z. Experimental study on fabricating micro-holes in DD5 single-crystal nickel-based superalloy using electrical discharge drilling. J Archiv Civ Mech Eng. 2020;20:87.10.1007/s43452-020-00089-z ↗
21. Sun Y, Gong Y, Wen X, Xin B. Evaluation of dimensional accuracy and surface integrity of cylindrical array microelectrodes and cylindrical array micro holes machined by EDM. J Archiv Civ Mech Eng. 2022;22:46.10.1007/s43452-021-00366-5 ↗
22. Kumar R, Kumar A, Singh I. Electric discharge drilling of micro holes in CFRP laminates. J Mater Process Technol. 2018;259:150–8.10.1016/j.jmatprotec.2018.04.031 ↗
23. Li MH. Theoretical foundation of electrical discharge machining. Beijing: National Defense of Industry Press; 1989. p. 26–7.
24. Huang S, Gao S, Huang C, Huang H. Nanoscale removal mechanisms in abrasive machining of brittle solids. Diam Abras Eng. 2022;42:257–67.
25. Qu SS, Yao P, Gong YD, Dk Chu, Yang YY, Li CW. Environmentally friendly grinding of C/SiCs using carbon nanofluid minimum quantity lubrication technology. J Clean Prod. 2022;366:132898.10.1016/j.jclepro.2022.132898 ↗
26. Piao YC, Li C, Hu YX, Cui HL, Luo XL, Geng YQ, Zhang FH. Nanoindentation induced anisotropy of deformation and damage behaviors of MgF2 crystals. J Market Res. 2024;28:4615–25.
27. Li C, Hu YX, Wei ZZ, Wu CJ, Peng YF, Zhang FH, Geng YQ. Damage evolution and removal behaviors of GaN crystals involved in double-grits grinding. Int J Extreme Manuf. 2024;6(2): 025103.
28. Ma L, Cai C, Tan Y, Gong Y, Zhu L. Theoretical model of transverse and longitudinal surface roughness and study on brittle-ductile transition mechanism for turning Fluorophlogopite ceramic. Int J Mech Sci. 2019;150:715–26.10.1016/j.ijmecsci.2018.10.059 ↗
29. Shao W, Zhang T. Process parameters optimization of high-speed milling 7075 aluminum alloy with nano-diamond coated tool. Diam Abras Eng. 2022;42(4):473–80.
30. Zhang Y, Xu Z, Zhu Y, Zhu D. Machining of a film-cooling hole in a single-crystal superalloy by high-speed electrochemical discharge drilling. Chin J Aeronaut. 2016;29(2):560–70.10.1016/j.cja.2015.06.021 ↗
31. Zhang Y, Xie B. Investigation on hole diameter non-uniformity of hole arrays by ultrasonic vibration-assisted EDM. Int J Adv Manuf Technol. 2021;112:3083–91.10.1007/s00170-021-06597-3 ↗
32. Li Z, Bai J. Influence of alternating side gap on micro-hole machining performances in micro-EDM. Int J Adv Manuf Technol. 2018;94:979–89.10.1007/s00170-017-0959-9 ↗
33. Chu Z, Zhao W, Gu L. Effect of electrode jump motion on machining debris concentration. J Mech Eng. 2013;49:185–92.10.3901/JME.2013.11.185 ↗
34. Zhang L, Wang Y, Wang Z. Gap flow simulation for micro-EDM deep-small hole machining with flatted electrod. Electromach Mould. 2011;3:33–7.
35. Kim D, Kim YS, Song KY, Ahn SH, Chu CN. Kerosene supply effect on performance of aluminum nitride micro-electrical discharge machining. Int J Precis Eng Manuf. 2022;23:581–91.10.1007/s12541-021-00568-0 ↗
36. Wang K, Zhang Q, Zhu G, Liu Q, Huang Y. Experimental study on micro electrical discharge machining with helical electrode. Int J Adv Manuf Technol. 2017;93:2639–45.10.1007/s00170-017-0747-6 ↗
37. Liu H, Bai J. The tool electrode wear and gap fluid field simulation analysis in micro-EDM drilling of micro-hole array. Procedia CIRP. 2020;95:220–5.10.1016/j.procir.2020.02.278 ↗
38. Feng G, Yang X, Chi G. Experimental and simulation study on micro hole machining in EDM with high-speed tool electrode rotation. Int J Adv Manuf Technol. 2019;101:367–75.10.1007/s00170-018-2917-6 ↗
39. Tanjilul M, Ahmed A, Kumar AS, Rahman M. A study on EDM debris particle size and flushing mechanism for efficient debris removal in EDM-drilling of Inconel 718. J Mater Process Technol. 2018;255:263–74.10.1016/j.jmatprotec.2017.12.016 ↗
40. Maity K, Choubey M. Modeling and process simulation of vibration assisted workpiece in micro-EDM using FEM. World J Eng. 2016;13(3):242–5.10.1108/WJE-06-2016-033 ↗
41. Liu Y, Chang H, Zhang W, Ma F, Sha Z, Zhang S. Study on gap glow field simulation in small hole machining of ultrasonic assisted EDM. Mater Sci Eng. 2017;280: 012009.
42. Cetin S, Okada A, Uno Y. Effect of debris distribution on wall concavity in deep hole EDM. JSME Int J. 2004;47:553–5.10.1299/jsmec.47.553 ↗
43. Jia ZY, Zheng XY, Wang FJ, Liu W. Research on flow state of interelectrode working fluid in micro-EDM. J Dalian Univer Technol. 2010;50:188–93.
44. Xie B, Zhang Y, Zhang J, Dai Y, Liu X. Flow field simulation and experimental investigation of ultrasonic vibration assisted EDM holes array. Int J Control Autom. 2015;8:419–24.10.14257/ijca.2015.8.12.38 ↗
45. Wang J, Wang YG, Zhao FL. Simulation of debris movement in micro electrical discharge machining of deep holes. Mater Sci Forum. 2009;626:267–72.10.4028/www.scientific.net/MSF.626-627.267 ↗
46. Liu H, Bai J, Zhang B, Cao Y, Hou S, Zhou Z. Breakthrough detection and servo control for micro-hole array EDM drilling. Int J Adv Manuf Technol. 2022;119:615–29.10.1007/s00170-021-08205-w ↗
47. Jeong YH, Min BK. Geometry prediction of EDM-drilled holes and tool electrode shapes of micro-EDM process using simulation. Int J Mach Tool Manuf. 2007;47:1817–26.10.1016/j.ijmachtools.2007.04.011 ↗
48. Li H, Wang Z, Wang Y, Liu H, Bai Y. Micro-EDM drilling of ZrB2-SiC-graphite composite using micro sheet-cylinder tool electrode. Int J Adv Manuf Technol. 2017;92:2033–41.10.1007/s00170-017-0296-z ↗
49. Chung DK, Shin HS, Kim BH, Park MS, Chu CN. Surface finishing of micro EDM holes using deionized water. Micromech Microeng. 2009;19: 045025.10.1088/0960-1317/19/4/045025 ↗
50. Jahan MP, Wong YS, Rahman M. A comparative experimental investigation of deep hole micro-EDM drilling capability for cemented carbide (WC-Co) against austenitic stainless steel (SUS 304). Int J Adv Manuf Technol. 2010;46:1145–60.10.1007/s00170-009-2167-8 ↗
51. Dilip DG, Panda S, Mathew J. Characterization and parametric optimization of micro-hole surfaces in micro-EDM drilling on Inconel 718 superalloy using genetic algorithm. Arab J Sci Eng. 2020;45:5057–74.10.1007/s13369-019-04325-4 ↗
52. Urso GD, Maccarini G, Ravasio C. Influence of electrode material in micro-EDM drilling of stainless steel and tungsten carbide. Int J Adv Manuf Technol. 2016;85:1–13.10.1007/s00170-014-6028-8 ↗
53. Ma G, Yu P, Hou W, Wang L, Xu J. Study on discharge gap of micro-EDM of the micro hole in titanium alloy. In: 2018 IEEE international conference on manipulation manufacturing and measurement on the nanoscale. 2018, pp 253–25710.1109/3M-NANO.2018.8552250 ↗
54. Pradhan B, Masanta M, Sarkar B, Bhattacharyya B. Investigation of electro-discharge micro-machining of titanium super alloy. Int J Adv Manuf Technol. 2009;41(11–12):1094–106.10.1007/s00170-008-1561-y ↗
55. Jahan MP, Lieh TW, Wong YS, Rahman M. An experimental investigation into the micro-electrodischarge machining behavior of p-type silicon. Int J Adv Manuf Technol. 2011;57:617–37.10.1007/s00170-011-3302-x ↗
56. Nguyen MD, Rahman M, Wong YS. An experimental study on micro-EDM in low-resistivity deionized water using short voltage pulses. Int J Adv Manuf Technol. 2012;58:33–544.10.1007/s00170-011-3397-0 ↗
57. Barman S, Hanumaiah N, Puri AB. Investigation on shape, size, surface quality and elemental characterization of high-aspect-ratio blind micro holes in die sinking micro EDM. Int J Adv Manuf Technol. 2015;76:115–26.10.1007/s00170-013-5243-z ↗
58. Tamang SK, Natarajan N, Chandrasekaran M. Optimization of EDM process in machining micro holes for improvement of hole quality. J Braz Soc Mech Sci Eng. 2017;39:1277–87.10.1007/s40430-016-0630-7 ↗
59. Maity KP, Singh RK. An optimisation of micro-EDM operation for fabrication of micro-hole. Int J Adv Manuf Technol. 2012;61:1221–9.10.1007/s00170-012-4098-z ↗
60. Mustafa A, Ulas C, Ahmet H. Optimization of micro-EDM drilling of inconel 718 superalloy. Int J Adv Manuf Technol. 2013;66:1015–25.10.1007/s00170-012-4385-8 ↗
61. Hourmand M, Sarhan AAD, Sayuti M. Characterizing the effects of micro electrical discharge machining parameters on material removal rate during micro EDM drilling of tungsten carbide (WC-Co). IOP Conf Ser Mater Sci Eng. 2017;241: 012005.10.1088/1757-899X/241/1/012005 ↗
62. Dave HK, Mathai VJ, Desai KP, Raval HK. Studies on quality of micro holes generated on Al 1100 using micro-electro-discharge machining process. Int J Adv Manuf Technol. 2015;76:127–40.10.1007/s00170-013-5542-4 ↗
63. Kliuev M, Boccadoro M, Perez R, DalBo W, Sternimann J, Kuster F, Wegener K. EDM drilling and shaping of cooling holes in Inconel 718 turbine blades. Procedia CIRP. 2016;42:322–7.10.1016/j.procir.2016.02.293 ↗
64. Pandey AK, Gautam GD. Grey relational analysis-based genetic algorithm optimization of electrical discharge drilling of Nimonic-90 superalloy. J Br Soc Mech Sci Eng. 2018;40:117.
65. Urso GD, Merla C. Workpiece and electrode influence on micro-EDM drilling performance. Precis Eng. 2014;38:903–14.10.1016/j.precisioneng.2014.05.007 ↗
66. Jahan MP, Wong YS, Rahman M. A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials. Mater Process Technol. 2009;209:3956–67.10.1016/j.jmatprotec.2008.09.015 ↗
67. Teicher U, Muller S, Munzner J, Nestler A. Micro-EDM of carbon fibre-reinforced plastics. Procedia CIRP. 2013;6:320–5.10.1016/j.procir.2013.03.092 ↗
68. Park S, Kim G, Lee W, Min BK, Lee SW, Kim TG. Microhole machining on precision CFRP components using electrical discharging machining. In: 20th international conference on composite materials. Copenhagen 2015.
69. Baghela R, Mali HS. A study on effects of discharge energy on geometric characteristics of high aspect ratio micro-holes on TiN-Al2O3 ceramics. Mater Today Proc. 2018;5:17828–37.10.1016/j.matpr.2018.06.108 ↗
70. Kuriakose S, Patowari PK, Bhatt J. Effect of micro-EDM machining parameters on the accuracy of micro hole drilling in Zr-based metallic glass. Eng Res Express. 2020;2:015001.10.1088/2631-8695/ab5c72 ↗
71. Ahmad JS, Shinde SR. Machinability of carbon/epoxy composites by electrical discharge machining. Int J Mach Mach Mater. 2016;18:3–17.
72. Ahmad JS. Hole quality and damage in drilling carbon/epoxy composites by electrical discharge machining. Mater Manuf Process. 2016;31:941–50.10.1080/10426914.2015.1048368 ↗
73. Wang D, Zhao WS, Gu L, Kang XM. A study on micro-hole machining of polycrystalline diamond by micro-electrical discharge machining. J Mater Process Technol. 2011;211:3–11.10.1016/j.jmatprotec.2010.07.034 ↗
74. Pilligrin JC, Asokan P, Jerald J, Kanagaraj G, Mukund Nilakantan J, Nielsen I. Tool speed and polarity effects in micro-EDM drilling of 316L stainless steel. Prod Manuf Res. 2017;5:99–117.
75. Bissacco G, Valentincic J, Hansen HN, Wiwe BN. Towards the effective tool wear control in micro-EDM milling. Int J Adv Manuf Technol. 2010;47:3–9.10.1007/s00170-009-2057-0 ↗
76. Li G, Natsu W, Yang J, Yu Z. Bubble flushing effect in micro EDM drilling and its relation with debris. J Mater Process Tech. 2022;305:117590.10.1016/j.jmatprotec.2022.117590 ↗
77. Li G, Natsu W, Yu Z. Study on quantitative estimation of bubble behavior in micro hole drilling with EDM. Int J Mach Tool Manufact. 2019;146: 103437.
78. Singh R, Dvivedi A, Kumar P. EDM of high aspect ratio micro-holes on Ti-6Al-4V alloy by synchronizing energy interactions. Mater Manuf Process. 2020;35:1188–203.10.1080/10426914.2020.1762207 ↗
79. Tam HY, Jiang W, Chan KL. A Process investigation for micro-EDM fabrication of through holes in thin copper sheets. Adv Mater Res. 2011;264:1376–82.10.4028/www.scientific.net/AMR.264-265.1376 ↗
80. Feng X, Xu B, Lei J, Wu X, Luo F, Fu L. Elimination of hole mouth burr in multilayer PCB micro-hole by using micro-EDM. Micromachines. 2021;12:688.10.3390/mi12060688 ↗
81. Dong S, Wang Z, Wang Y, Liu H. An experimental investigation of enhancement surface quality of micro-holes for Be-Cu alloys using micro-EDM with multi-diameter electrode and different dielectrics. Procedia CIRP. 2016;42:257–62.10.1016/j.procir.2016.02.282 ↗
82. Chung DK, Shin HS, Park MS, Chu CN. Machining characteristics of micro EDM in water using high frequency bipolar pulse. Int J Precis Eng Manuf. 2010;12:195–201.10.1007/s12541-011-0027-6 ↗
83. Uhlmann E, Schimmelpfennig TM, Perfilov I, Streckenbach J, Schweitzer L. Comparative analysis of dry-EDM and conventional EDM for the manufacturing of micro holes in Si3N4-TiN. Procedia CIRP. 2016;42:173–8.10.1016/j.procir.2016.02.214 ↗
84. Kibria G, Sarkar B, Pradhan B, Bhattacharyya B. Comparative study of different dielectrics for micro-EDM performance during micro hole machining of Ti-6Al-4V alloy. Int J Adv Manuf Technol. 2010;48:557–70.10.1007/s00170-009-2298-y ↗
85. Li G, Natsu W. Realization of micro EDM drilling with high machining speed and accuracy by using mist deionized water jet. Precis Eng. 2020;61:136–46.10.1016/j.precisioneng.2019.09.016 ↗
86. Sun Z, Chen J, Lu G. A review on electrode compensation methods in micro-EDM. Electromach Mould. 2013;1:1–5.
87. Masuzawa T. Three-dimensional micro machining by machine tools. CIRP Ann Manuf Technol. 1997;46:621–8.10.1016/S0007-8506(07)60882-8 ↗
88. Yu ZY, Masuzawa T, Fujino M. Micro-EDM for three dimensional cavities-development of uniform wear method. CIRP Ann Manuf Technol. 1998;47(1):169–72.10.1016/S0007-8506(07)62810-8 ↗
89. Yu HL, Luan JJ, Li JZ, Zhang YS, Yu ZY, Guo DM. A new electrode wear compensation method for improving performance in 3D micro EDM milling. J Micromech Microeng. 2010;20:55011.10.1088/0960-1317/20/5/055011 ↗
90. Nirala CK, Saha P. Precise μEDM-drilling using real-time indirect tool wear compensation. J Mater Process Technol. 2017;240:176–89.10.1016/j.jmatprotec.2016.09.024 ↗
91. Hou S, Bai J. Electrode wear prediction and offline compensation for micro-EDM drilling through-hole array using geometry simulation. Int J Adv Manuf Technol. 2022;120:6877–89.10.1007/s00170-022-09224-x ↗
92. Lin C, Li J, Liang S, Zhang Y, Gou J, Liu J, Li Y. Improving the precision of micro-EDM for blind holes in titanium alloy by fixed reference axial compensation. Rev Adv Mater Sci. 2021;60:771–83.10.1515/rams-2021-0057 ↗
93. Lee CS, Heo EY, Kim JM, Choi TH, Kim DW. Electrode wear estimation model for EDM drilling. Robot Comput Integr Manuf. 2015;36:70–5.10.1016/j.rcim.2015.02.001 ↗
94. Chang YF, Chiu ZH. Electrode wear-compensation of electric discharge scanning process using a robust gap-control. Mechatronics. 2004;14:1121–39.10.1016/j.mechatronics.2004.06.005 ↗
95. Aligiri E, Yeo SH, Tan PC. A new tool wear compensation method based on real-time estimation of material removal volume in micro-EDM. J Mater Process Technol. 2010;210:2292–303.10.1016/j.jmatprotec.2010.08.024 ↗
96. Mahardika M, Mitsui K. A new method for monitoring micro-electric discharge machining process. Int J Mach Tool Manufact. 2008;148:446–58.10.1016/j.ijmachtools.2007.08.023 ↗
97. Mahardika M, Tsujimoto T, Mitsui K. A new approach on the determination of ease of machining by EDM processes. Int J Mach Tool Manufact. 2008;7–8:746–60.10.1016/j.ijmachtools.2007.12.012 ↗
98. Jung JW, Hoon KS, Jeong YH, Min BK, Lee SG. Real-time gap control for micro-EDM: application in a micro factory. Int J Precis Eng Manuf. 2008;9:3–6.
99. Bissacco G, Hansen HN, Tristo G, Valentincic J. Feasibility of wear compensation in micro EDM milling based on discharge counting and discharge population characterization. CIRP Ann Manuf Technol. 2011;60:231–4.10.1016/j.cirp.2011.03.064 ↗
100. Tong H, Li Y, Hu M. Experimental research on effects of process parameters on servo scanning 3D micro electrical discharge machining. Chin J Mech Eng. 2012;25:114–21.10.3901/CJME.2012.01.114 ↗