Thermal and acoustic performance of solid waste incorporated cement based composites: an analytical review
Source abstract
Abstract
Abstract Extensive reviews have been conducted on the mechanical, structural, and durability properties of cementitious composites incorporating waste materials. However, a significant knowledge gap exists regarding a comprehensive analysis of their thermal insulation and sound absorption properties. This review seeks to bridge that gap by examining the effects of various waste materials, such as rubber, plastic, glass, ceramic, wood, construction waste, and bio-waste, on these properties in concrete. Incorporating these waste materials improves thermal insulation and sound absorption mainly by increasing porosity and creating interconnected micro and macro pores, leveraging the waste materials’ inherent high porosity and low density. Key findings from the review include a 77% reduction in thermal conductivity with 45% volume replacement of dry materials with plastic compared to control concrete. In addition, maximum sound absorption of 60% at 2000 Hz was achieved with a combination of fly ash and rubber at 30% weight replacement of coarse aggregate. Optimizing the thermal insulation and sound absorption properties of concrete is critically dependent on effective particle size, as it directly influences the concrete’s pore structure. Finer rubber particles (0.1–4 mm) significantly enhance thermal insulation by reducing thermal conductivity to 0.28 W/mK, compared to 0.44 W/mK for coarser particles (5–10 mm). In contrast, coarser particles improve sound absorption, achieving a peak absorption of 32% at 1000 Hz, compared to 27% for finer particles. This dual optimization strategy demonstrates the potential for tailored particle sizes to improve the necessary properties of concrete. The review also outlines future research directions and practical applications, highlighting the potential of recyclable waste materials in the building construction and insulation industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Visvanathan C, Glawe U. Domestic solid waste management in South Asian countries–a comparative analysis. Promoting Reduce, Reuse, and Recycle in South Asia 2006. pp. 28–30.
2. Bhat RA, Singh DV, Qadri H, Dar GH, Dervash MA, Bhat SA, et al. Vulnerability of municipal solid waste: an emerging threat to aquatic ecosystems. Chemosphere. 2022;287(Pt 3): 132223. https://doi.org/10.1016/j.chemosphere.2021.132223.10.1016/j.chemosphere.2021.132223 ↗
3. Sharma KD, Jain S. Municipal solid waste generation, composition, and management: the global scenario. Soc Responsib J. 2020;16(6):917–48. https://doi.org/10.1108/srj-06-2019-0210.10.1108/srj-06-2019-0210 ↗
4. Hondo D, Arthur L, Jagath Dickella Gamaralalage P. Solid Waste Management in Developing Asia: Prioritizing Waste Separation. In: Policy Brief. Japan: ADB institute; 2020. https://www.iges.or.jp/en/publication_documents/pub/policy/en/11085/adbi-pb2020-7.pdf. Accessed 15 May 2024.
5. Pickin J, Wardle C, O’Farrell K, Stovell L, Nyunt P, Guazzo S, et al. National Waste Report 2022. In: The Department of Climate Change, Energy, the Environment and Wate. 2022. https://www.dcceew.gov.au/sites/default/files/documents/national-waste-report-2022.pdf. Accessed 1 May 2024.
6. Kurniawan TA, Liang X, O’Callaghan E, Goh H, Othman MHD, Avtar R, et al. Transformation of solid waste management in china: moving towards sustainability through digitalization-based circular economy. Sustainability. 2022. https://doi.org/10.3390/su14042374.10.3390/su14042374 ↗
7. Mandpe A, Bhattacharya A, Paliya S, Pratap V, Hussain A, Kumar S. Life-cycle assessment approach for municipal solid waste management system of Delhi city. Environ Res. 2022;212(Pt C): 113424. https://doi.org/10.1016/j.envres.2022.113424.10.1016/j.envres.2022.113424 ↗
8. Tuzi N, Fraser S, Pietka C. National waste characterization report: the composition of Canadian residual municipal solid waste. In: Canada. Environment and Climate Change Canada, issuing body. 2020. https://publications.gc.ca/collections/collection_2020/eccc/en14/En14-405-2020-eng.pdf. Accessed 28 Mar 2024.
9. Wilson DC, Modak LRP, Soos R, Rogero AC, Iyer M, Simonett O. Global waste management outlook. UNEP; 2015. p. 332.
10. Limami H, Manssouri I, Cherkaoui K, Khaldoun A. Physicochemical, mechanical and thermal performance of lightweight bricks with recycled date pits waste additives. J Build Eng. 2021. https://doi.org/10.1016/j.jobe.2020.101867.10.1016/j.jobe.2020.101867 ↗
11. Dezhampanah S, Nikbin IM, Charkhtab S, Fakhimi F, Mehdipour Bazkiaei F, Mohebbi R. Environmental performance and durability of concrete incorporating waste tire rubber and steel fiber subjected to acid attack. J Cleaner Prod. 2020. https://doi.org/10.1016/j.jclepro.2020.122216.10.1016/j.jclepro.2020.122216 ↗
12. Sinkhonde D. Generating response surface models for optimisation of CO2 emission and properties of concrete modified with waste materia. Cleaner Mater. 2022. https://doi.org/10.1016/j.clema.2022.100146.10.1016/j.clema.2022.100146 ↗
13. Momotaz H, Rahman MM, Karim MR, Zhuge Y, Ma X, Levett P. Comparative study on properties of kerb concrete made from recycled materials and related carbon footprint. J Build Eng. 2023;72: 106484. https://doi.org/10.1016/j.jobe.2023.106484.10.1016/j.jobe.2023.106484 ↗
14. Alam Imteaz M, Arulrajah A, Horpibulsuk S, Ahsan A. Environmental suitability and carbon footprint savings of recycled tyre crumbs for road applications. Int J Environ Res. 2018;12:693–702. https://doi.org/10.1007/s41742-018-0126-7.10.1007/s41742-018-0126-7 ↗
15. Rangel-Buitrago N, Neal W, Pilkey O, Longo N. The global impact of sand mining on beaches and dunes. Ocean Coastal Manag. 2023. https://doi.org/10.1016/j.ocecoaman.2023.106492.10.1016/j.ocecoaman.2023.106492 ↗
16. Navaratnam S, Tushar Q, Jahan I, Zhang G. Environmental sustainability of industrial waste-based cementitious materials: a review. Exp Investig Life-Cycle Assess. 2023. https://doi.org/10.3390/su15031873.10.3390/su15031873 ↗
17. Adhikary SK, Ashish DK. Energy & buildings aerogel based thermal insulating cementitious composites : a review. Energy Build. 2021. https://doi.org/10.1016/j.enbuild.2021.111058.10.1016/j.enbuild.2021.111058 ↗
18. Islam S, Bhat G. Environmentally-friendly thermal and acoustic insulation materials from recycled textiles. J Environ Manage. 2019. https://doi.org/10.1016/j.jenvman.2019.109536.10.1016/j.jenvman.2019.109536 ↗
19. Wang YM, Wang JY, Deng ZH, Xiao JZ. Studying thermal and mechanical properties of recycled concrete by using ceramic aggregate. Sustainability. 2023. https://doi.org/10.3390/su15032642.10.3390/su15032642 ↗
20. Lachheb A, Allouhi A, Marhoune ME, et al. Thermal insulation improvement in construction materials by adding spent coffee grounds: an experimental and simulation study. J Cleaner Production. 2018. https://doi.org/10.1016/j.jclepro.2018.11.140.10.1016/j.jclepro.2018.11.140 ↗
21. Mohamed ZE, Al-Hadithi AI. The effect of adding expanded polystyrene beads (EPS) on polymer-modified mortar. Eng Technol Appl Sci Res. 2022;12(6):9426–30. https://doi.org/10.48084/etasr.5226.10.48084/etasr.5226 ↗
22. Ali YAY, Fahmy EHA, AbouZeid MN, Shaheen YBI, Mooty MNA. Use of expanded polystyrene in developing solid brick masonry units. Constr Build Mater. 2020. https://doi.org/10.1016/j.conbuildmat.2020.118109.10.1016/j.conbuildmat.2020.118109 ↗
23. Agarwal M, Castillo ED. Normal and controlled low-strength material concrete with volume of ash and glass waste. ACI Mater J. 2022;119(4):75–88. https://doi.org/10.14359/51734687.10.14359/51734687 ↗
24. He XY, Li WL, Su Y, Zheng ZQ, Fu JJ, Zeng JY, et al. Recycling of plastic waste concrete to prepare an effective additive for early strength and late permeability improvement of cement paste. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.128581.10.1016/j.conbuildmat.2022.128581 ↗
25. Yuan XS, Dai MJ, Gao YJ, Zhou YB, Liu F. Effect on mechanical properties and microstructure of high-strength eco-friendly concrete with waste glass powder-eggshell particles. J Build Eng. 2023. https://doi.org/10.1016/j.jobe.2023.107871.10.1016/j.jobe.2023.107871 ↗
26. Rahim AAF, Mohammed AA, Al-Kamaki YSS. Flexural behavior of composite T-beam made of plastic waste aggregate concrete web and high-strength concrete flange. Structures. 2023;47:2138–47. https://doi.org/10.1016/j.istruc.2022.11.096.10.1016/j.istruc.2022.11.096 ↗
27. Al-Tarbi SM, Al-Amoudi OSB, Al-Osta MA, Al-Awsh WA, Ali MR, Maslehuddin M. Development of eco-friendly hollow concrete blocks in the field using wasted high-density polyethylene, low-density polyethylene, and crumb tire rubber. J Mater Res Technol. 2022;21:1915–32. https://doi.org/10.1016/j.jmrt.2022.10.027.10.1016/j.jmrt.2022.10.027 ↗
28. Al-Osta MA, Al-Tamimi AS, Al-Tarbi SM, Al-Amoudi OSB, Al-Awsh WA, Saleh TA. Development of sustainable concrete using recycled high-density polyethylene and crumb tires: Mechanical and thermal properties. J Build Eng. 2022. https://doi.org/10.1016/j.jobe.2021.103399.10.1016/j.jobe.2021.103399 ↗
29. Malek M, Jackowski M, Lasica W, Dydek K, Boczkowska A. An experimental study of possible post-war ferronickel slag waste disposal in Szklary (Lower Silesian, Poland) as partial aggregate substitute in concrete: characterization of physical, mechanical, and thermal properties. Materials. 2021. https://doi.org/10.3390/ma14102552.10.3390/ma14102552 ↗
30. Petrella A, Mundo RD, Gisi SD, Todaro F, Labianca C, Notarnicola M. Environmentally sustainable cement composites based on end-of-life tyre rubber and recycled waste. Materials. 2019;12:1–18.10.3390/ma12203289 ↗
31. Liu HB, Li QY, Ni SY. Assessment of the engineering properties of biomass recycled aggregate concrete developed from coconut shells. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.128015.10.1016/j.conbuildmat.2022.128015 ↗
32. Liu H, Li Q, Wang P. Assessment of the engineering properties and economic advantage of recycled aggregate concrete developed from waste clay bricks and coconut shells. J Build Eng. 2023. https://doi.org/10.1016/j.jobe.2023.106071.10.1016/j.jobe.2023.106071 ↗
33. Amantino GM, Hasparyk NP, Tiecher F, Toledo RD. Assessment of bio-aggregate concretes’ properties with rice residue. J Build Eng. 2022. https://doi.org/10.1016/j.jobe.2022.104348.10.1016/j.jobe.2022.104348 ↗
34. Sosoi G, Abid C, Barbuta M, Burlacu A, Balan MC, Branoaea M, et al. experimental investigation on mechanical and thermal properties of concrete using waste materials as an aggregate substitution. Materials (Basel). 2022. https://doi.org/10.3390/ma15051728.10.3390/ma15051728 ↗
35. Noaman AT, Abed MS, Al-Gebory L, Al-Zubaidi AB, Al-Tabbakh AA. Production of agro-waste cement composites: influence of nutshells on mechanical and hardened properties. Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2023.132137.10.1016/j.conbuildmat.2023.132137 ↗
36. Liu HY, Wu HS, Chou CP. Study on engineering and thermal properties of environment-friendly lightweight brick made from Kinmen oyster shells & sorghum waste. Constr Build Mater. 2020. https://doi.org/10.1016/j.conbuildmat.2020.118367.10.1016/j.conbuildmat.2020.118367 ↗
37. Pokorny J, Sevcík R, Sál J, Fiala L, Zárybnická L, Podolka L. Bio-based aggregate in the production of advanced thermal-insulating concrete with improved acoustic performance. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.129436.10.1016/j.conbuildmat.2022.129436 ↗
38. Yang D, Liu M, Zhang Z, Yao P, Ma Z. Properties and modification of sustainable foam concrete including eco-friendly recycled powder from concrete waste. Case Stud Constr Mater. 2022. https://doi.org/10.1016/j.cscm.2021.e00826.10.1016/j.cscm.2021.e00826 ↗
39. Chin CO, Yang X, Kong SY, Paul SC, Susilawati WLS. Mechanical and thermal properties of lightweight concrete incorporated with activated carbon as coarse aggregate. J Build Eng. 2020. https://doi.org/10.1016/j.jobe.2020.101347.10.1016/j.jobe.2020.101347 ↗
40. Duan HJ, Wang Y. Mechanical and thermal properties of sustainable lightweight concrete containing raw buckwheat husk. Innov Infrastruct Solut. 2022. https://doi.org/10.1007/s41062-022-00812-0.10.1007/s41062-022-00812-0 ↗
41. Wang PH, Xu CY, Li QY, Guo YX, Wang L. Evaluation on the mechanical, thermal insulation and durability properties of wood recycled ecological concrete. Materialia. 2023. https://doi.org/10.1016/j.mtla.2023.101965.10.1016/j.mtla.2023.101965 ↗
42. Führ G, Masuero AB, Pagnussat DT, Barreto M. Impact sound attenuation of subfloor mortars made with exfoliated vermiculite and chrome sawdust. Appl Acoustics. 2021. https://doi.org/10.1016/j.apacoust.2020.107725.10.1016/j.apacoust.2020.107725 ↗
43. Rostami J, Khandel O, Sedighardekani R, Sahneh AR, Ghahari S. Enhanced workability, durability, and thermal properties of cement-based composites with aerogel and paraffin coated recycled aggregates. J Cleaner Prod. 2021. https://doi.org/10.1016/j.jclepro.2021.126518.10.1016/j.jclepro.2021.126518 ↗
44. Atyia MM, Mahdy MG, Abd EM. Production and properties of lightweight concrete incorporating recycled waste crushed clay bricks. Constr Build Mater. 2021. https://doi.org/10.1016/j.conbuildmat.2021.124655.10.1016/j.conbuildmat.2021.124655 ↗
45. Mirnezami S, Hassani A, Bayat A. Evaluation of the effect of metallurgical aggregates (steel and copper slag) on the thermal conductivity and mechanical properties of concrete in jointed plain concrete pavements (JPCP). Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2022.129532.10.1016/j.conbuildmat.2022.129532 ↗
46. Augonis A, Ivanauskas E, Bocullo V, Kantautas A, Vaiciukyniene D. The influence of expanded glass and expanded clay on lightweight aggregate shotcrete properties. Materials. 2022. https://doi.org/10.3390/ma15051674.10.3390/ma15051674 ↗
47. Reynoso LE, Romero ABC, Viegas GM, San Juan GA. Characterization of an alternative thermal insulation material using recycled expanded polystyrene. Constr Build Mater. 2021. https://doi.org/10.1016/j.conbuildmat.2021.124058.10.1016/j.conbuildmat.2021.124058 ↗
48. Bahij S, Omary S, Steiner V, Feugeas F, Ibrahimkhil MH. Effect of non-woven polyethylene terephthalate (PET) tissue on fresh and hardened properties of concrete. Materials. 2022. https://doi.org/10.3390/ma15248766.10.3390/ma15248766 ↗
49. Ali K, Qureshi MI, Saleem S, Khan SU. Effect of waste electronic plastic and silica fume on mechanical properties and thermal performance of concrete. Constr Build Mater. 2021. https://doi.org/10.1016/j.conbuildmat.2021.122952.10.1016/j.conbuildmat.2021.122952 ↗
50. Todaro F, Petrella A, Santomasi G, Gisi SD, Notarnicola M. Environmental sustainable cement mortars based on polyethylene terephthalate from recycling operations. Materials. 2023. https://doi.org/10.3390/ma16052111.10.3390/ma16052111 ↗
51. Butt FK, Shangguan DH, Butt AQ, Arshad MT, Raja BNK, Khitab A, et al. An experimental study to mitigate environmental impacts by transforming waste plastic bags into paving blocks and roof tiles. Sustainability. 2023. https://doi.org/10.3390/su152215801.10.3390/su152215801 ↗
52. Damdelen O, Tansu A. Influence of recycled plastic on the thermal transmittance and sustainable assessment of concrete mixes. J Construct Eng Manag. 2022. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002292.10.1061/(ASCE)CO.1943-7862.0002292 ↗
53. Herihiri O, Guettala A, Benabed B. An investigation on the physical, mechanical and thermal properties of dune sand mortars lightened by expanded polystyrene beads (EPS). Építőanyag J Silicate Based Composite Mater. 2021. https://doi.org/10.14382/epitoanyag-jsbcm.2021.6.10.14382/epitoanyag-jsbcm.2021.6 ↗
54. Adewoyin O, Adesina A, Das S. Performance evaluation of thermal-efficient lightweight mortars made with expanded glass as aggregates. J Mater Civ Eng. 2022. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004208.10.1061/(ASCE)MT.1943-5533.0004208 ↗
55. Senhadji Y, Siad H, Escadeillas G, Benosman AS, Chihaoui R, Mouli M, et al. Physical, mechanical and thermal properties of lightweight composite mortars containing recycled polyvinyl chloride. Constr Build Mater. 2019;195:198–207. https://doi.org/10.1016/j.conbuildmat.2018.11.070.10.1016/j.conbuildmat.2018.11.070 ↗
56. Ajam L, Trabelsi A, Kammoun Z. Valorisation of face mask waste in mortar. Innov Infrastruct Solut. 2022. https://doi.org/10.1007/s41062-021-00729-0.10.1007/s41062-021-00729-0 ↗
57. Xiao J, Hao L, Cao W, Ye T. Influence of recycled powder derived from waste concrete on mechanical and thermal properties of foam concrete. J Build Eng. 2022. https://doi.org/10.1016/j.jobe.2022.105203.10.1016/j.jobe.2022.105203 ↗
58. Gencel O, Oguz M, Gholampour A, Ozbakkaloglu T. Recycling waste concretes as fine aggregate and fly ash as binder in production of thermal insulating foam concretes. J Build Eng. 2021. https://doi.org/10.1016/j.jobe.2021.102232.10.1016/j.jobe.2021.102232 ↗
59. Farina I, Moccia I, Salzano C, Singh N, Sadrolodabaee P, Colangelo F. Compressive and thermal properties of non-structural lightweight concrete containing industrial byproduct aggregates. Materials. 2022. https://doi.org/10.3390/ma15114029.10.3390/ma15114029 ↗
60. Zhao J, Huang G, Guo Y, Gupta R, Liu WV. Developing thermal insulation cement-based mortars using recycled carbon black derived from scrapped off-the-road tires. Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2023.132043.10.1016/j.conbuildmat.2023.132043 ↗
61. Záleská M, Pavlík Z, Cítek D, Jankovsky O, Pavlíková M. Eco-friendly concrete with scrap-tyre-rubber-based aggregate - Properties and thermal stability. Constr Build Mater. 2019;225:709–22. https://doi.org/10.1016/j.conbuildmat.2019.07.168.10.1016/j.conbuildmat.2019.07.168 ↗
62. Khaloo AR, Dehestan M, Rahmatabadi P. Mechanical properties of concrete containing a high volume of tire–rubber particles. Waste Manage. 2008;28:2472–82. https://doi.org/10.1016/j.wasman.2008.01.015.10.1016/j.wasman.2008.01.015 ↗
63. Sambucci M, Valente M. Ground waste tire rubber as a total replacement of natural aggregates in concrete mixes: application for lightweight paving blocks. Materials. 2021. https://doi.org/10.3390/ma14247493.10.3390/ma14247493 ↗
64. Wang R, Meyer C. Performance of cement mortar made with recycled high impact polystyrene. Cement Concr Compos. 2012;34:975–81. https://doi.org/10.1016/j.cemconcomp.2012.06.014.10.1016/j.cemconcomp.2012.06.014 ↗
65. Rahmani E, Dehestani M, Beygi MHA, Allahyari H, Nikbin M. On the mechanical properties of concrete containing waste PET particles. Constr Build Mater. 2013;47:1302–8. https://doi.org/10.1016/j.conbuildmat.2013.06.041.10.1016/j.conbuildmat.2013.06.041 ↗
66. Kumar S, Baskar K. Effect of temperature and thermal shock on concrete containing hazardous electronic waste. J Hazardous Toxic Radioactive Waste. 2018;22(2):04017028. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000387.10.1061/(ASCE)HZ.2153-5515.0000387 ↗
67. Zaetang Y, Lao-un J, Wongkvanklom A, Wongsa A, Sata V, Chindaprasirt P. Fire-resistant and thermal insulation improvements of cement mortar with auto glass waste sand. KSCE J Civ Eng. 2023;27(9):4032–42. https://doi.org/10.1007/s12205-023-0442-0.10.1007/s12205-023-0442-0 ↗
68. Pavlikova M, Pivak A, Zaleska M, Jankovsky O, Reiterman P, Pavlik Z. Magnesium oxychloride cement composites lightened with granulated scrap tires and expanded glass. Materials (Basel). 2020. https://doi.org/10.3390/ma13214828.10.3390/ma13214828 ↗
69. Fadiel A, Al Rifaie F, Abu-Lebdeh T, Fini E. Use of crumb rubber to improve thermal efficiency of cement-based materials. Am J Eng Appl Sci. 2014;7(1):1–11. https://doi.org/10.3844/ajeassp.2014.1.11.10.3844/ajeassp.2014.1.11 ↗
70. Dafalla MA, Samman A. Soil and backfill material of environmental friendly thermal properties. Int J Geomate. 2016;10(22):2083–7.
71. Al-Akhras NM, Smadi MM. Properties of tire rubber ash mortar. Cement Concrete Composites. 2004. https://doi.org/10.1016/j.cemconcomp.2004.01.004.10.1016/j.cemconcomp.2004.01.004 ↗
72. Guo S, Dai Q, Si R, Sun X, Lu C. Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire. J Cleaner Prod. 2017;148:681–9. https://doi.org/10.1016/j.jclepro.2017.02.046.10.1016/j.jclepro.2017.02.046 ↗
73. Geethamma VG, Asaletha R, Kalarikkal N, Thomas S. Vibration and sound damping in polymers. Resonance. 2014;19:821–33.10.1007/s12045-014-0091-1 ↗
74. Prasittisopin L, Termkhajornkit P, Kim YH. Review of concrete with expanded polystyrene (EPS): performance and environmental aspects. J Cleaner Prod. 2022. https://doi.org/10.1016/j.jclepro.2022.132919.10.1016/j.jclepro.2022.132919 ↗
75. Ferrándiz-Mas V, Bond T, García-Alcocel E, Cheeseman CR. Lightweight mortars containing expanded polystyrene and paper sludge ash. Constr Build Mater. 2014;61:285–92. https://doi.org/10.1016/j.conbuildmat.2014.03.028.10.1016/j.conbuildmat.2014.03.028 ↗
76. Flores N, Flores D, Hernández-olivares F, Navacerrada MA. Mechanical and thermal properties of concrete incorporating rubber and fibres from tyre recycling. Constr Build Mater. 2017;144:563–73. https://doi.org/10.1016/j.conbuildmat.2017.03.196.10.1016/j.conbuildmat.2017.03.196 ↗
77. Sutcu M, Akkurt S. The use of recycled paper processing residues in making porous brick with reduced thermal conductivity. Ceram Int. 2009;35(7):2625–31. https://doi.org/10.1016/j.ceramint.2009.02.027.10.1016/j.ceramint.2009.02.027 ↗
78. Remadnia A, Goullieux A, t’Kint MQ, Dheilly R-M. Physical properties of composites manufactured with two wastes from food-processing industry. Waste Biomass Valor. 2019;11(6):2995–3005. https://doi.org/10.1007/s12649-018-0525-1.10.1007/s12649-018-0525-1 ↗
79. Cojocaru A, Isopescu DN, Maxineasa SG, Petre SG. Assessment of thermal and mechanical properties of cement-based materials-part 1: crumb rubber concrete. Buildings. 2023. https://doi.org/10.3390/buildings13020324.10.3390/buildings13020324 ↗
80. Yu Y, Li B, Luo DM. Coupling influence between recycled ceramics and grazed hollow beads on mechanical properties and thermal conductivity of recycled thermal insulation concrete. Materials. 2021. https://doi.org/10.3390/ma14164695.10.3390/ma14164695 ↗
81. Ismail ZZ, Jaeel AJ, Alwared AM, Závodská A. Experimental investigation of a new sustainable approach for recycling waste styrofoam food containers in lightweight concrete. Innov Infrastruct Solut. 2021. https://doi.org/10.1007/s41062-021-00463-7.10.1007/s41062-021-00463-7 ↗
82. Wang JQ, Du B. Experimental studies of thermal and acoustic properties of recycled aggregate crumb rubber concrete. J Build Eng. 2020. https://doi.org/10.1016/j.jobe.2020.101836.10.1016/j.jobe.2020.101836 ↗
83. Rucinska T, Glowacka A, Sidelko R. The influence of incinerated sewage sludge as an aggregate on the selected properties of cement mortars. Materials. 2021. https://doi.org/10.3390/ma14195846.10.3390/ma14195846 ↗
84. Pokorny J, Sevcik R, Sál J, Zárybnická L. Lightweight blended building waste in the production of innovative cement-based composites for sustainable construction. Constr Build Mater. 2021. https://doi.org/10.1016/j.conbuildmat.2021.123933.10.1016/j.conbuildmat.2021.123933 ↗
85. Zou B, Wang Y, Nasir Amin M, Iftikhar B, Khan K, Ali M, et al. Artificial intelligence-based optimized models for predicting the slump and compressive strength of sustainable alkali-derived concrete. Constr Build Mater. 2023;409: 134092. https://doi.org/10.1016/j.conbuildmat.2023.134092.10.1016/j.conbuildmat.2023.134092 ↗
86. Benjeddou O, Ravindran G, Abdelzaher MA. Thermal and acoustic features of lightweight concrete based on marble wastes and expanded perlite aggregate. Buildings. 2023. https://doi.org/10.3390/buildings13040992.10.3390/buildings13040992 ↗
87. Pavlík Z, Pavlíková M, Záleská M, Vysvaril M, Zizlavsky T. Lightweight thermal efficient repair mortars with expanded glass (EG) for repairing historical buildings: The effect of binder type and EG aggregate dosage on their performance. Energy Build. 2022. https://doi.org/10.1016/j.enbuild.2022.112526.10.1016/j.enbuild.2022.112526 ↗
88. Mhaya AM, Shahidan S, Zuki SSM, Huseien GF, Azmi MAM, Ismail M, et al. Durability and acoustic performance of rubberized concrete containing pofa as cement replacement. Sustainability. 2022. https://doi.org/10.3390/su142315510.10.3390/su142315510 ↗
89. Atef M, Bassioni G, Azab N, Abdellatif MH. On the acoustical performance of eco-friendly cementitious composite with recycled fine rubber particles. Constr Build Mater. 2022. https://doi.org/10.1016/j.conbuildmat.2022.126830.10.1016/j.conbuildmat.2022.126830 ↗
90. Mohseni E, Koushkbaghi M. Recycling of landfill waste tyre in construction materials: Durability of concrete made with chipped rubber. Constr Build Mater. 2023. https://doi.org/10.1016/j.conbuildmat.2023.134114.10.1016/j.conbuildmat.2023.134114 ↗
91. Adhikary SK, Ashish DK. Turning waste expanded polystyrene into lightweight aggregate: Towards sustainable construction industry. Sci Total Environ. 2022. https://doi.org/10.1016/j.scitotenv.2022.155852.10.1016/j.scitotenv.2022.155852 ↗
92. Mostofinejad D, Aghamohammadi O, Bahmani H, Ebrahimi S. Improving thermal characteristics and energy absorption of concrete by recycled rubber and silica fume. Develop Built Environ. 2023. https://doi.org/10.1016/j.dibe.2023.100221.10.1016/j.dibe.2023.100221 ↗
93. Dixit A, Pang SD, Kang S-h, Moon J. Lightweight structural cement composites with expanded polystyrene (EPS) for enhanced thermal insulation. Cement Concrete Composites. 2019. https://doi.org/10.1016/j.cemconcomp.2019.04.023.10.1016/j.cemconcomp.2019.04.023 ↗
94. Belmokaddem M, Mahi A, Senhadji Y, Pekmezci BY. Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate. Constr Build Mater. 2020. https://doi.org/10.1016/j.conbuildmat.2020.119559.10.1016/j.conbuildmat.2020.119559 ↗
95. Basha SI, Ali MR, Al-Dulaijan SU, Maslehuddin M. Mechanical and thermal properties of lightweight recycled plastic aggregate concrete. J Build Eng. 2020. https://doi.org/10.1016/j.jobe.2020.101710.10.1016/j.jobe.2020.101710 ↗
96. Akkouri N, Bourzik O, Baba K, Tayeh BA. Thermophysical characteristics of eco-friendly mortars containing recycled PET as partial sand replacement in dry and wet conditions. Innov Infrastruct Solut. 2022. https://doi.org/10.1007/s41062-022-00838-4.10.1007/s41062-022-00838-4 ↗
97. Ghorbani B, Yaghoubi E, Arulrajah A. Thermal and mechanical characteristics of recycled concrete aggregates mixed with plastic wastes: experimental investigation and mathematical modeling. Acta Geotech. 2022;17(7):3017–32. https://doi.org/10.1007/s11440-021-01370-y.10.1007/s11440-021-01370-y ↗
98. Mohit M, Sharifi Y. Thermal and microstructure properties of cement mortar containing ceramic waste powder as alternative cementitious materials. Constr Build Mater. 2019;223:643–56. https://doi.org/10.1016/j.conbuildmat.2019.07.029.10.1016/j.conbuildmat.2019.07.029 ↗
99. Nasry O, Samaouali A, Belarouf S, Moufakkir A, El Idrissi HS, Soulami H, et al. Thermophysical properties of cement mortar containing waste glass powder. Crystals. 2021. https://doi.org/10.3390/cryst11050488.10.3390/cryst11050488 ↗
100. Benchouaf A, Debieb F, Kadri E, Bentchikou M. Time-dependent behavior of eco-friendly sand concrete using treated wood shavings. Mech Time-Depend Mater. 2023;27(2):543–58. https://doi.org/10.1007/s11043-023-09607-x.10.1007/s11043-023-09607-x ↗