Effect of Cu addition on microstructure, wear, and corrosion resistance of AlCoCrFeNiSi0.5Cux (x = 0.01, 0.05, 0.1) high-entropy alloys
Source abstract
Abstract
Abstract The influence of copper addition on the structure and selected properties of AlCoCrFeNiSi0.5Cux high-entropy alloys is described. Slowly cooled ingots were prepared by induction melting, and the samples in the form of plates were obtained by pressure casting. The conducted structural studies confirmed the presence of BCC/B2 phase. Microsegregation in the ingots was associated with the formation of intermetallic Cr3Si and Fe5Si3 phases. An increase in the cooling rate stopped segregation by reducing the mobility of Cr and Si. The hyperfine magnetic field distributions indicated the formation of the BCC Fe(Co,Ni,Si,Cr) solid solution for alloys in the form of plates. The lowest corrosion-current density (0.04 μA/cm2) in 3.5%-NaCl solution was obtained for the plate with the lowest copper content. The dominated aluminum surface states for the post-corrosive plates highlighted the binding energies of Al2O3. A tendency of reduced coercivity with increased copper content was observed. The positive effect of copper addition on wear resistance was confirmed for the AlCoCrFeNiSi0.5Cu0.1 alloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Yu Y, Shi P, Feng K, Liu J, Cheng J, Qiao Z, Yang J, Li J, Liu W. Effects of Ti and Cu on the microstructure evolution of AlCoCrFeNi high-entropy alloy during heat treatment. Acta Metall Sin (English Lett). 2020;33:1077–90. https://doi.org/10.1007/s40195-020-01002-6.10.1007/s40195-020-01002-6 ↗
2. Chen W, Hilhorst A, Bokas G, Gorsse S, Jacques PJ, Hautier G. A map of single-phase high-entropy alloys. Nat Commun. 2023;14:1–10. https://doi.org/10.1038/s41467-023-38423-7.10.1038/s41467-023-38423-7 ↗
3. Kumar A, Chandrakar R, Dubey V, Michalska-Domańska M (2023) High-entropy alloys: processing, alloying element, microstructure, and properties, De Gruyter, Berlin, Boston, https://doi.org/10.1515/978311076947010.1515/9783110769470 ↗
4. Gludovatz B, Ritchie RO. Fracture properties of high-entropy alloys. MRS Bull. 2022;47:176–85. https://doi.org/10.1557/s43577-022-00267-9.10.1557/s43577-022-00267-9 ↗
5. Nassar A, Mullis A, Cochrane R, Aslam Z, Micklethwaite S, Cao L. Rapid solidification of AlCoCrFeNi2.1 high-entropy alloy. J Alloys Compd. 2022. https://doi.org/10.1016/j.jallcom.2021.163350.10.1016/j.jallcom.2021.163350 ↗
6. Yu Y, Wang J, Yang J, Qiao Z, Duan H, Li J, Li J, Liu W. Corrosive and tribological behaviors of AlCoCrFeNi-M high entropy alloys under 90 wt.% H2O2 solution. Tribol Int. 2019;131:24–32. https://doi.org/10.1016/j.triboint.2018.10.012.10.1016/j.triboint.2018.10.012 ↗
7. Łoński W, Spilka M, Kądziołka-Gaweł M, Gębara P, Radoń A, Warski T, Młynarek-Żak K, Babilas R. The effect of cooling rate on the structure and selected properties of AlCoCrFeNiSix (x = 0; 0.25; 0.5; 0.75) high entropy alloys. J Alloys Compd. 2022;905:1–10. https://doi.org/10.1016/j.jallcom.2022.164074.10.1016/j.jallcom.2022.164074 ↗
8. Samoilova O, Pratskova S, Shaburova N, Moghaddam AO, Trofimov E. Corrosion resistance of Al0.5CoCrFeNiCuxAgy (x = 0.25, 0.5; y = 0, 0.1) high-entropy alloys in 0.5M H2SO4 solution. Materials (Basel). 2023;16:1–12. https://doi.org/10.3390/ma16093585.10.3390/ma16093585 ↗
9. Liu YY, Chen Z, Shi JC, Wang ZY, Zhang JY. The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys. Vacuum. 2019;161:143–9. https://doi.org/10.1016/j.vacuum.2018.12.009.10.1016/j.vacuum.2018.12.009 ↗
10. Pratskova S, Samoilova O, Ageenko E, Shaburova N, Moghaddam AO, Trofimov E. Corrosion resistance of AlxCoCrFeNiM (M = Ti, V, Si, Mn, Cu) high entropy alloys in NaCl and H2SO4 solutions. Metals (Basel). 2022;12:1–13. https://doi.org/10.3390/met12020352.10.3390/met12020352 ↗
11. Chen X, Qian H, Lou Y, Yang B, Cui T, Zhang D. Effects of Cu-content and passivation treatment on the corrosion resistance of Al0.3CuxCoCrFeNi high-entropy alloys. J Alloys Compd. 2022. https://doi.org/10.1016/j.jallcom.2022.165956.10.1016/j.jallcom.2022.165956 ↗
12. Zhang LJ, Yu PF, Zhang MD, Liu DJ, Zhou Z, Ma MZ, Liaw PK, Li G, Liu RP. Microstructure and mechanical behaviors of GdxCoCrCuFeNi high-entropy alloys. Mater Sci Eng A. 2017;707:708–16. https://doi.org/10.1016/j.msea.2017.09.102.10.1016/j.msea.2017.09.102 ↗
13. Qiu Y, Thomas S, Gibson MA, Fraser HL, Birbilis N. Corrosion of high entropy alloys. Npj Mater Degrad. 2017;1:1–18. https://doi.org/10.1038/s41529-017-0009-y.10.1038/s41529-017-0009-y ↗
14. Chen C, Chen J, Yuan S, Li W, Wang W, Li X, Zhang W, Wei R, Guan S, Wang T, Zhang T, Lei N, Li F. Microstructure, mechanical properties, corrosion resistance and anti-bacterial behavior of novel Co-free high entropy alloys. J Alloys Compd. 2022. https://doi.org/10.1016/j.jallcom.2022.163714.10.1016/j.jallcom.2022.163714 ↗
15. Dąbrowa J, Cieślak G, Stygar M, Mroczka K, Berent K, Kulik T, Danielewski M. Influence of Cu content on high temperature oxidation behavior of AlCoCrCuxFeNi high entropy alloys (x = 0; 0.5; 1). Intermetallics. 2017;84:52–61. https://doi.org/10.1016/j.intermet.2016.12.015.10.1016/j.intermet.2016.12.015 ↗
16. Huang L, Wang X, Huang B, Zhao X, Chen H, Wang C. Effect of Cu segregation on the phase transformation and properties of AlCrFeNiTiCux high-entropy alloys. Intermetallics. 2022. https://doi.org/10.1016/j.intermet.2021.107397.10.1016/j.intermet.2021.107397 ↗
17. Zhu JM, Meng JL, Liang JL. Microstructure and mechanical properties of multi-principal component AlCoCrFeNiCux alloy. Rare Met. 2016;35:385–9. https://doi.org/10.1007/s12598-014-0268-5.10.1007/s12598-014-0268-5 ↗
18. Krapivka NA, Firstov SA, Karpets MV, Myslivchenko AN, Gorban VF. Features of phase and structure formation in high-entropy alloys of the AlCrFeCoNiCux system (x = 0, 0.5, 1.0, 2.0, 3.0). Phys Met Metallogr. 2015;116:467–74. https://doi.org/10.1134/S0031918X15030084.10.1134/S0031918X15030084 ↗
19. Yu Y, Xu N, Zhu S, Qiao Z, Zhang J, Yang J, Liu W. A novel Cu-doped high entropy alloy with excellent comprehensive performances for marine application. J Mater Sci Technol. 2021;69:48–59. https://doi.org/10.1016/j.jmst.2020.08.016.10.1016/j.jmst.2020.08.016 ↗
20. Dufanets M, Sklyarchuk V, Plevachuk Y, Kulyk Y, Mudry S. The structural and thermodynamic analysis of phase formation processes in equiatomic AlCoCuFeNiCr high-entropy alloys. J Mater Eng Perform. 2020;29:7321–7. https://doi.org/10.1007/s11665-020-05250-6.10.1007/s11665-020-05250-6 ↗
21. Jones NG, Izzo R, Mignanelli PM, Christofidou KA, Stone HJ. Phase evolution in an Al0.5CrFeCoNiCu high entropy alloy. Intermetallics. 2016;71:43–50. https://doi.org/10.1016/j.intermet.2015.12.001.10.1016/j.intermet.2015.12.001 ↗
22. Lei Y, Hashimoto N, Isobe S. Cu-containing high entropy alloys for nuclear fusion application. Mater Trans. 2020;61:1247–51. https://doi.org/10.2320/matertrans.MT-M2020049.10.2320/matertrans.MT-M2020049 ↗
23. Dada M, Popoola P, Adeosun S, Mathe N. High entropy alloys for aerospace applications. Aerodynamics. 2021. https://doi.org/10.5772/intechopen.84982.10.5772/intechopen.84982 ↗
24. Luzar J, Priputen P, Drienovský M, Vrtnik S, Koželj P, Jelen A, Wencka M, Gačnik D, Mihor P, Ambrožič B, Dražić G, Meden A, Dolinšek J. Zero-Magnetostriction magnetically soft high-entropy alloys in the AlCoFeNiCux (x = 0.6–3.0) system for supersilent applications. Adv Mater Interfaces. 2022;9:1–13. https://doi.org/10.1002/admi.202201535.10.1002/admi.202201535 ↗
25. Li Z, Qiao D, Xu Y, Zhou E, Yang C, Yuan X, Lu Y, Gu JD, Wolfgang S, Xu D, Wang F. Cu-bearing high-entropy alloys with excellent antiviral properties. J Mater Sci Technol. 2021;84:59–64. https://doi.org/10.1016/j.jmst.2020.12.027.10.1016/j.jmst.2020.12.027 ↗
26. Babilas R, Łoński W, Boryło P, Kądziołka-Gaweł M, Gębara P, Radoń A. The influence of cooling rate, chromium and silicon addition on the structure and properties of AlCoCrFeNiSi high entropy alloys. J Magn Magn Mater. 2020;502: 166492. https://doi.org/10.1016/j.jmmm.2020.166492.10.1016/j.jmmm.2020.166492 ↗
27. Rancourt DG, Ping JY. Voigt-based methods for arbitrary-shape static hyperfine parameter distributions in Mössbauer spectroscopy. Nucl Instrum Methods Phys Res Sect B Beam Interact Mater Atoms. 1991;58:85–97. https://doi.org/10.1016/0168-583X(91)95681-3.10.1016/0168-583X(91)95681-3 ↗
28. Jin B, Zhang N, Wang F, Zhang Y, Li D. Phase evolution and wear mechanism of AlCoCrFeNiSix high-entropy alloys produced by arc melting. Mater Res Express. 2018;5:1–9. https://doi.org/10.1088/2053-1591/aad52b.10.1088/2053-1591/aad52b ↗
29. Manzoni A, Daoud H, Völkl R, Glatzel U, Wanderka N. Phase separation in equiatomic AlCoCrFeNi high-entropy alloy. Ultramicroscopy. 2013;132:212–5. https://doi.org/10.1016/j.ultramic.2012.12.015.10.1016/j.ultramic.2012.12.015 ↗
30. Singh S, Wanderka N, Murty BS, Glatzel U, Banhart J. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy. Acta Mater. 2011;59:182–90. https://doi.org/10.1016/j.actamat.2010.09.023.10.1016/j.actamat.2010.09.023 ↗
31. Apiñaniz E, Garitaonandia J, Plazaola F. Influence of disorder on the magnetic properties of FeAl alloys: theory. J Non-Cryst Solids. 2001;287:302–7. https://doi.org/10.1016/S0022-3093(01)00570-1.10.1016/S0022-3093(01)00570-1 ↗
32. Degmová J, Dekan J, Šimeg Veterníková J, Slugen V. Mössbauer spectroscopy study of laboratory produced ODS steels. Acta Phys Pol A. 2017;131:1171–3. https://doi.org/10.12693/APhysPolA.131.1171.10.12693/APhysPolA.131.1171 ↗
33. Satuła D, Szymański K, Dobrzyński L, Reçko K, Waliszewski J. Mössbauer study of the Fe1-xNix Invar alloys by monochromatic circularly polarized source. Nukleonika. 2003;48:71–4.
34. Jones NG, Christofidou KA, Stone HJ. Rapid precipitation in an Al0.5CrFeCoNiCu high entropy alloy. Mater Sci Technol (United Kingdom). 2015;31:1171–7. https://doi.org/10.1179/1743284715Y.0000000004.10.1179/1743284715Y.0000000004 ↗
35. Kulkarni R, Murty BS, Srinivas V. Study of microstructure and magnetic properties of AlNiCo(CuFe) high entropy alloy. J Alloys Compd. 2018;746:194–9. https://doi.org/10.1016/j.jallcom.2018.02.275.10.1016/j.jallcom.2018.02.275 ↗
36. Wang YP, Li BS, Ren MX, Yang C, Fu HZ. Microstructure and compressive properties of AlCrFeCoNi high entropy alloy. Mater Sci Eng A. 2008;491:154–8. https://doi.org/10.1016/j.msea.2008.01.064.10.1016/j.msea.2008.01.064 ↗
37. Maji B, Krishnan M. Effect of copper addition on the microstructure and shape recovery of Fe-Mn-Si-Cr-Ni shape memory alloys. Mater Sci Eng A. 2013;570:13–26. https://doi.org/10.1016/j.msea.2013.01.061.10.1016/j.msea.2013.01.061 ↗
38. Ioroi K, Aono Y, Xu X, Omori T, Kainuma R. Melting point of pure cr and phase equilibria in the Cr-Si binary system. J Phase Equilibria Diffus. 2022;43:229–42. https://doi.org/10.1007/s11669-022-00954-9.10.1007/s11669-022-00954-9 ↗
39. Şimşek T, Özkul İ, Canbay CA, Avar B, Şimşek T, Güler SH, Özcan S, Güler Ö, Chattopadhyay AK. Effect of Cu, Sn and Sb addition on the structural, thermal and magnetic properties of body-centered cubic structured CoNiMnGaSi high entropy alloy. Appl Phys A Mater Sci Process. 2022;128:1–10. https://doi.org/10.1007/s00339-022-05667-x.10.1007/s00339-022-05667-x ↗
40. Yu Q, Xu WW, Cui C, Gong X, Li W, Chen L, Li X, Vitos L. Unveiling segregation-induced evolution in phase constitution of Cu-containing high-entropy alloys. J Alloys Compd. 2020;843:1–6. https://doi.org/10.1016/j.jallcom.2020.156109.10.1016/j.jallcom.2020.156109 ↗
41. Liu C, Peng W, Jiang CS, Guo H, Tao J, Deng X, Chen Z. Composition and phase structure dependence of mechanical and magnetic properties for AlCoCuFeNix high entropy alloys. J Mater Sci Technol. 2019;35:1175–83. https://doi.org/10.1016/j.jmst.2018.12.014.10.1016/j.jmst.2018.12.014 ↗
42. Wang J, Jiang H, Chang X, Zhang L, Wang H, Zhu L, Qin S. Effect of Cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys. Corros Sci. 2023. https://doi.org/10.1016/j.corsci.2023.111313.10.1016/j.corsci.2023.111313 ↗
43. Ziomek-Moroz M, Rodriguez A. High entropy alloys – aqueous corrosion. Ref Modul Mater Sci Mater Eng. 2021. https://doi.org/10.1016/B978-0-12-819726-4.00113-7.10.1016/B978-0-12-819726-4.00113-7 ↗
44. Hsu YJ, Chiang WC, Wu JK. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution. Mater Chem Phys. 2005;92:112–7. https://doi.org/10.1016/j.matchemphys.2005.01.001.10.1016/j.matchemphys.2005.01.001 ↗
45. Shi H, Fetzer R, Jianu A, Weisenburger A, Heinzel A, Lang F, Müller G. Influence of alloying elements (Cu, Ti, Nb) on the microstructure and corrosion behaviour of AlCrFeNi-based high entropy alloys exposed to oxygen-containing molten Pb. Corros Sci. 2021;190:1–13. https://doi.org/10.1016/j.corsci.2021.109659.10.1016/j.corsci.2021.109659 ↗
46. Yeh JJ, Lindau I. Atomic subshell photoionization cross sections and asymmetry parameters: 1 ⩽ Z ⩽ 103. At Data Nucl Data Tables. 1985;32:1–155. https://doi.org/10.1016/0092-640X(85)90016-6.10.1016/0092-640X(85)90016-6 ↗
47. Hüfner S, Wertheim GK. X-ray photoemission studies of the 3d metals from Mn to Cu. Phys Lett A. 1974;47:349–50. https://doi.org/10.1016/0375-9601(74)90122-4.10.1016/0375-9601(74)90122-4 ↗
48. Chełkowska G, Bajorek A, Katolik A, Śliwiński Ł. XPS and magnetic studies of Gd(Ni1-xMx)5 compounds (M = Fe, Co). J Magn Magn Mater. 2015;101:58–70. https://doi.org/10.1016/j.jmmm.2003.12.1052.10.1016/j.jmmm.2003.12.1052 ↗
49. Shabanova IN, Maratkanova AN, Sosnov VA. Satellites in core level XPS spectra of the Fe-based systems. J Electron Spectros Relat Phenomena. 1998;88–91:339–42. https://doi.org/10.1016/s0368-2048(97)00152-7.10.1016/s0368-2048(97)00152-7 ↗
50. Maratkanova AN, Sosnov VA, Shabanova IN, Keller NV. X-ray photoelectron study of the electronic structure of Fe systems. J Struct Chem. 1998;39:899–903. https://doi.org/10.1007/BF02903601.10.1007/BF02903601 ↗
51. Acker JF, Stadnik ZM, Fuggle JC, Hoekstra HJWM, Buschow KHJ, Stroink G. Magnetic moments and X-ray photoelectron spectroscopy splittings in Fe 3s core levels of materials containing Fe. Phys Rev B. 1988;37:6827–34. https://doi.org/10.1103/PhysRevB.37.6827.10.1103/PhysRevB.37.6827 ↗
52. Bajorek A, Chrobak A, Chełkowska G, Ociepka K. Magnetism in the YxGd1-xFe3 system. J Magn Magn Mater. 2015;395:221–8. https://doi.org/10.1016/j.jmmm.2015.07.084.10.1016/j.jmmm.2015.07.084 ↗
53. Bajorek A, Chrobak A, Ociepka K, Chełkowska G. The analysis of the magnetic properties and the electronic structure in the TbxGd1−xFe3 intermetallics. Intermetallics. 2013;43:110–20. https://doi.org/10.1016/j.intermet.2013.07.020.10.1016/j.intermet.2013.07.020 ↗
54. Bajorek A, Skornia P, Randrianantoandro N. Influence of 3d-doping on the correlation between electronic structure and magnetism in Ho(Fe1-xCox)3 intermetallics. Intermetallics. 2020. https://doi.org/10.1016/j.intermet.2020.106990.10.1016/j.intermet.2020.106990 ↗
55. Kądziołka-Gaweł M, Bajorek A, Goraus J, Łopadczak P, Oboz M. Magnetic properties and structure of (Fe100-xGex)0.95Ni0.05 alloys (x = 0, 5, 10, 15, 20). Intermetallics. 2021. https://doi.org/10.1016/j.intermet.2021.107141.10.1016/j.intermet.2021.107141 ↗
56. Shabanova IN, Keller NV, Sosnov VA, Menshikov AZ. X-ray photoelectron studies of spin state changes in 3d metal systems. J Electron Spectros Relat Phenomena. 2001;114–116:581–4. https://doi.org/10.1016/S0368-2048(00)00413-8.10.1016/S0368-2048(00)00413-8 ↗
57. Tsurkan V, Demeter M, Schneider B, Hartmann D, Neumann M. Exchange splitting of the Cr, Fe and Mn 3s XPS spectra in some ternary magnetic semiconductor sulphides. Solid State Commun. 2000;114:149–54. https://doi.org/10.1016/S0038-1098(00)00012-0.10.1016/S0038-1098(00)00012-0 ↗
58. Demchenko MV, Gaponova OP, Myslyvchenko OM, Antoszewski B, Bychenko MM. Microstructure and properties of AlCrFeCoNiCux high-entropy alloys. JEng Sci. 2018;5:11–5. https://doi.org/10.21272/jes.2018.5(1).c3.10.21272/jes.2018.5(1).c3 ↗
59. Hassan MA, Yehia HM, Mohamed ASA, El-Nikhaily AE, Elkady OA. Effect of copper addition on the AlCoCrFeNi high entropy alloys properties via the electroless plating and powder metallurgy technique. Crystals. 2021;11:1–19. https://doi.org/10.3390/cryst11050540.10.3390/cryst11050540 ↗
60. Tsai MH, Yeh J. High-entropy alloys: a critical review. Mater Res Lett. 2014;2:107–23. https://doi.org/10.1080/21663831.2014.912690.10.1080/21663831.2014.912690 ↗
61. Samoilova O, Shaburova N, Ostovari MA, Trofimov E. Al0.25CoCrFeNiSi0.6 high entropy alloy with high hardness and improved wear resistance. Mater Lett. 2022;328:133190. https://doi.org/10.1016/j.matlet.2022.133190.10.1016/j.matlet.2022.133190 ↗
62. Li H, Jie J, Liu S, Zhang Y, Li T. Crystal growth and morphology evolution of D88 (Mn, Fe)5Si3 phase and its influence on the mechanical and wear properties of brasses. Mater Sci Eng A. 2017;704:45–56. https://doi.org/10.1016/j.msea.2017.08.001.10.1016/j.msea.2017.08.001 ↗
63. Cheng Z, Wang S, Wu G, Gao J, Yang X, Wu H. Tribological properties of high-entropy alloys: a review. Int J Miner Metall Mater. 2022;29:389–403. https://doi.org/10.1007/s12613-021-2373-4.10.1007/s12613-021-2373-4 ↗
64. Xu Z, Li DY, Chen D. Effect of Ti on the wear behavior of AlCoCrFeNi high-entropy alloy during unidirectional and bi-directional sliding wear processes. Wear. 2021. https://doi.org/10.1016/j.wear.2021.203650.10.1016/j.wear.2021.203650 ↗
65. Duan H, Wu Y, Hua M, Yuan C, Wang D, Tu J, Kou H, Li J. Tribological properties of AlCoCrFeNiCu high-entropy alloy in hydrogen peroxide solution and in oil lubricant. Wear. 2013;297:1045–51. https://doi.org/10.1016/j.wear.2012.11.014.10.1016/j.wear.2012.11.014 ↗
66. Li LR, He X, Li C, Zhang R, Meng F, Zhang H, Cui X, Nong Z. Processes and properties of self-lubricating coatings fabricated on light alloys by using micro-arc oxidation: a review. Crystals. 2024;14:845. https://doi.org/10.3390/cryst14100845.10.3390/cryst14100845 ↗
67. Yuan J, Yao Y, Zhuang M, Du Y, Wang L, Yu Z. Effects of Cu and WS2 addition on microstructural evolution and tribological properties of self-lubricating anti-wear coatings prepared by laser cladding. Tribol Inter. 2021;157: 106872. https://doi.org/10.1016/j.triboint.2021.106872.10.1016/j.triboint.2021.106872 ↗