Synthesis and characterisation of ZnO nanoparticles and its influence on the engineering properties of lightweight foamed concrete
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Tayeh BA, Zeyad AM, Agwa IS, Amin M. Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete. Case Stud Constr Mater. 2021;15: e00673.
2. Mohamed A, Tayeh B, Abu Aisheh Y, Salih M. Exploring the performance of steel fiber reinforced lightweight concrete: a case study review. Case Stud Constr Mater. 2023;18: e01968.
3. Richard T, Dobogai J, Gerhardt T, Young W. Cellular concrete—a potential load-bearing insulation for cryogenic applications. IEEE Trans Magn. 1975;11(2):500–3.10.1109/TMAG.1975.1058746 ↗
4. Maglad A, Mydin M, Majeed S, Tayeh B, Mostafa S. Development of eco-friendly foamed concrete with waste glass sheet powder for mechanical, thermal, and durability properties enhancement. J Build Engg. 2023;80: 107974.
5. Tikalsky PJ, Pospisil J, MacDonald W. A method for assessment of the freeze–thaw resistance of preformed foam cellular concrete. Cem Concr Res. 2004;34(5):889–93.10.1016/j.cemconres.2003.11.005 ↗
6. Othuman Mydin MA, Wang YC. Structural performance of lightweight steel-foamed concrete-steel composite walling system under compression. Thin-Walled Struct. 2011;49(1):66–76.10.1016/j.tws.2010.08.007 ↗
7. Jones M, Mccarthy A. Behaviour and assessment of foamed concrete for construction applications. In: The International Conference on the Use of Foamed Concrete in Construction. , 2005, 61–88.
8. Mindess S. Developments in the formulation and reinforcement of concrete. 2008.10.1533/9781845694685 ↗
9. Rudolph J, Valore C. Cellular concretes part 2 physical properties. ACI J Proc. 1954; 50(6):773.
10. Amran YHM, Farzadnia N, Abang Ali AA. Properties and applications of foamed concrete; a review. Constr Build Mater. 2015;101:990–1005.10.1016/j.conbuildmat.2015.10.112 ↗
11. Naseem T, Durrani T. The role of some important metal oxide nanoparticles for wastewater and antibacterial applications: a review. Environ Chem Ecotoxicol. 2021;3:59–75.10.1016/j.enceco.2020.12.001 ↗
12. Kołodziejczak-Radzimska A, Jesionowski T. Zinc oxide—from synthesis to application: a review. Materials. 2014;7(4):2833–81.10.3390/ma7042833 ↗
13. Wang Y-T, Fang Z, Yang X-X, Yang Y-T, Luo J, Xu K, Bao G-R. One-step production of biodiesel from Jatropha oils with high acid value at low temperature by magnetic acid-base amphoteric nanoparticles. Chem Eng J. 2018;348:929–39.10.1016/j.cej.2018.05.039 ↗
14. Yan X, Qin J, Gao Q, Ye Z, Ai T, Su X, Wang Z. Nano-sized ZnO supported on poly(triazine imide) nanotube for visible light driven photocatalytic reduction of Cr(VI). J Mater Sci/Mater Electron. 2018;29:19509–16.10.1007/s10854-018-0081-2 ↗
15. Zhang F, Chen X, Wu F, Ji Y. High adsorption capability and selectivity of ZnO nanoparticles for dye removal. Colloids Surf A. 2016;509:474–83.10.1016/j.colsurfa.2016.09.059 ↗
16. Tripathi D, Kumar R, Mehta PK, Singh A. Evaluation of a sustainable self compacting concrete using destructive and non-destructive testing. Mater Today Proc. 2022;58:830–5.10.1016/j.matpr.2021.09.389 ↗
17. Ahmed MA, Ahmed S, Metwally ME, Sherif MA, Tobbala DE. Preparation of nano-silica from rice husk ash using acid chemical treatment and burning. In: The International Conference of Engineering Sciences and Applications, Aswan, Egypt, 29–31 January 2016. (2016).
18. Tabatabaei J, Gorji L. The effect of TiO2 nanoparticles in reduction of environmental pollution in concrete structures. Adv Concr Constr. 2019;7:127–9.
19. Tobbala DE, Khesha GM, Salama RS, Badawy AAM. Reinventing concrete: Sustainable nano-alumina from metallic waste-cans and nano-ferrite for next-generation green magnetite heavyweight concrete. J Build Eng. 2024;93: 109829.
20. Tobbala DE. Effect of Nano-ferrite addition on mechanical properties and gamma ray attenuation coefficient of steel fiber reinforced heavy weight concrete. Constr Build Mater. 2019;207:48–58.10.1016/j.conbuildmat.2019.02.099 ↗
21. Mousavi MA, Sadeghi-Nik A, Bahari A, Ashour A, Khayat KH. Cement paste modified by nano-montmorillonite and carbon nanotubes. ACI Mater J. 2022;119(3):173–86.
22. Gopalakrishnan R, Nithiyanantham S. Effect of ZnO nanoparticles on cement mortar for enhancing the physico-chemical, mechanical and related properties. Adv Sci Eng Med. 2020;12(3):348–55.10.1166/asem.2020.2505 ↗
23. Tobbala DE, Rashed AS, Tayeh BA, Ahmed TI. Performance and microstructure analysis of high-strength concrete incorporated with nanoparticles subjected to high temperatures and actual fires. Arch Civ Mech Eng. 2022;22(2):85.10.1007/s43452-022-00397-6 ↗
24. Metwally ME, Ahmed MA, Ahmed SA, Sherif MA, Tobbala DE. An investigation into the effect of locally prepared nano-silica on the microstructure and hardened properties of high strength concrete. In: The International Conference of Engineering Sciences and Applications, Aswan, Egypt, 29–31 January 2016. 2016.
25. Tobbala DE. Comparative Study on the Durability of Nano-Silica and Nano-Ferrite Concrete. East Afr Sch J Eng Comput Sci. 2021;4(9):124–31.
26. Tobbala DE, Rashed AS, Salama RS, Ahmed TI. Performance enhancement of reinforced concrete exposed to electrochemical magnesium chloride using nano-ferrite zinc-rich epoxy. J Build Eng. 2022;57: 104869.
27. Tobbala DE, Rashed AS, Tayeh BA. Flexural performance of RC beams incorporating Zinc-rich and epoxy bonding coating layers exposed to fire. Struct Eng Mech. 2022;82(2):163–72.
28. Tobbala DE, Abdelsalam B, Saad I. Bond performance of a hybrid coating zinc-rich epoxy incorporating nano-ferrite for steel rebars subjected to high temperatures in concrete. J Build Eng. 2020;32:101698.10.1016/j.jobe.2020.101698 ↗
29. Amin M, Tayeh BA. Investigating the mechanical and microstructure properties of fibre-reinforced lightweight concrete under elevated temperatures. Case Stud Constr Mater. 2020;13: e00459.
30. Ahmed TI, El-Shafai NM, El-Mehasseb IM, Sharshir SW, Tobbala DE. Recent advances in the heating resistance, thermal gravimetric analysis, and microstructure of green concrete incorporating palm-leaf and cotton-stalk nanoparticles. J Build Eng. 2022;61: 105252.
31. Bica BO, de Melo JVS. Concrete blocks nano-modified with zinc oxide (ZnO) for photocatalytic paving: Performance comparison with titanium dioxide (TiO2). Constr Build Mater. 2020;252: 119120.
32. Amiri B, Bahari A, Sadeghi-Nik A, Nik A, Movahedi N. Use of AFM technique to study the nano– silica effects in concrete mixture. Indian J Sci Technol. 2012;5:2055–9.10.17485/ijst/2012/v5i2.5 ↗
33. Le Pivert M, Poupart R, Gnambodoe-Capochichi M, Martin N, Leprince-Wang Y. Direct growth of ZnO nanowires on civil engineering materials: smart materials for supported photodegradation. Microsyst Nanoeng. 2016;5.10.1038/s41378-019-0102-1 ↗
34. Goswami N, Sharma DK. Structural and optical properties of unannealed and annealed ZnO nanoparticles prepared by a chemical precipitation technique. Physica E. 2010;42(5):1675–82.10.1016/j.physe.2010.01.023 ↗
35. Kumar M, Bansal M, Garg R. An overview of beneficiary aspects of zinc oxide nanoparticles on performance of cement composites. Mater Today Proc. 2021;43:892–8.10.1016/j.matpr.2020.07.215 ↗
36. ASTMC157/C157M-17. Standard test method for length change of hardened hydraulic-cement mortar and concrete. West Conshohocken: American Society for Testing and Materials, ASTM International; 2017.
37. BS-EN-197-1. Cement composition, specifications and conformity criteria for common cements. London: British Standards Institution; 2011.
38. ASTMC33-03. Standard Specification for Concrete Aggregates, vol. 04.02. West Conshohocken: ASTM International; 2010.
39. BS-EN-3148. Water for making concrete (Including Notes on the Suitability of the Water). London: British Standards Institute; 1980.
40. ASTMC796/C796M-19. Standard test method for foaming agents for use in producing cellular concrete using preformed foam. West Conshohocken: ASTM International; 2019.
41. Mahmood NB, Saeed FR, Gbashi KR, Mahmood U-S. Synthesis and characterization of zinc oxide nanoparticles via oxalate co-precipitation method. Mater Lett X. 2022;13: 100126.
42. ASTMC192/C192M-02. Standard practice for making and curing concrete test specimens in the laboratory, vol. 04.02. West Conshohocken: ASTM International; 2017.
43. ASTMC230. Standard specification for flow table for use in tests of hydraulic cement. ASTM International; 1997.
44. BS.EN-196-3. Determination of setting times and soundness. Berlin: British Standard Institution; 2016.
45. BSEN-12350-6. Testing fresh concrete density. British Standard Institution; 2019.
46. ASTM.C1403-15. Standard test method for rate of water absorption of masonry mortars. West Conshohocken: ASTM International; 2015.
47. BS.EN-1881122. Testing concrete Method for determination of water absorption. British Standard Institution; 2020.
48. Cabrera JG, Lynsdale CJ. A new gas permeameter for measuring the permeability of mortar and concrete. Mag Concr Res. 1988;40(144):177–82.10.1680/macr.1988.40.144.177 ↗
49. BS.EN-12390-3. Testing hardened concrete. Compressive strength of test specimens. British Standard Institution, Berlin; 2011.
50. BS.EN-12390-5. Flexural strength of test specimens. British Standard Institution; 2019.
51. BS.EN-12390-6. Testing hardened concrete. Tensile splitting strength of test specimens. British Standard Institution; 2009.
52. ASTMC469, C469M-14. Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression: annual book of ASTM Standards, vol. 09.49. West Conshohocken: ASTM International; 2014.
53. ASTMC17719. Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus. West Conshohocken: American Society for Testing and Materials, ASTM International; 2019.
54. ISO-16700. Microbeam analysis - Scanning electron microscopy Guidelines for calibrating image magnification. International Organization for Standardization; 2016.
55. ASTM-D4404-18. Standard test method for determination of pore volume and pore volume distribution of soil and rock by mercury intrusion porosimetry. West Conshohocken: American Society for Testing and Materials: ASTM International; 2018.
56. Rosero IA, Somarriba ES, Farivar B, Murray CD. Effects of mixture design parameters on the properties of belitic calcium sulfoaluminate concrete. Mag Concr Res. 2024;76(5):217–28.10.1680/jmacr.23.00067 ↗
57. Garg R, Garg R. Effect of zinc oxide nanoparticles on mechanical properties of silica fume-based cement composites. Mater Today Proc. 2021;43:778–83.10.1016/j.matpr.2020.06.168 ↗
58. Liu J, Jin H, Gu C, Yang Y. Effects of zinc oxide nanoparticles on early-age hydration and the mechanical properties of cement paste. Constr Build Mater. 2019;217:352–62.10.1016/j.conbuildmat.2019.05.027 ↗
59. Sikora P, Łukowski P, Cendrowski K, Horszczaruk EB, Mijowska E. The effect of nanosilica on the mechanical properties of polymer-cement composites (PCC). Proc Eng. 2015;108:139–45.10.1016/j.proeng.2015.06.129 ↗
60. Fernández Olmo I, Chacon E, Irabien A. Influence of lead, zinc, iron (III) and chromium (III) oxides on the setting time and strength development of Portland cement. Cem Concr Res. 2001;31(8):1213–9.10.1016/S0008-8846(01)00545-2 ↗
61. Duraipandian N, Dharmar S. Influence of Zinc oxide nanoparticle on strength and durability of cement mortar. Int J Earth Sci Eng. 2016;9:175.
62. Arefi MR, Rezaei-Zarchi S. Synthesis of zinc oxide nanoparticles and their effect on the compressive strength and setting time of self-compacted concrete paste as cementitious composites. Int J Mol Sci. 2012;13(4):4340–50.10.3390/ijms13044340 ↗
63. Ghahari S, Ghafari E, Lu N. Effect of ZnO nanoparticles on thermoelectric properties of cement composite for waste heat harvesting. Constr Build Mater. 2017;146:755–63.10.1016/j.conbuildmat.2017.04.165 ↗
64. Li X, Li J, Lu Z, Chen J. Properties and hydration mechanism of cement pastes in presence of nano-ZnO. Constr Build Mater. 2021;289: 123080.
65. Ziegler F, Gieré R, Johnson CA. Sorption Mechanisms of Zinc to Calcium Silicate Hydrate: Sorption and Microscopic Investigations. Environ Sci Technol. 2001;35(22):4556–61.10.1021/es001768m ↗
66. Moulin I, Rose J, Stone W, Bottero J-Y, Mosnier F, Haehnel C. Lead, zinc and chromium (III) and (VI) speciation in hydrated cement phases. In: Woolley GR, Goumans JJJM, Wainwright PJ, editors. Waste management series, vol. 1. Elsevier; 2000. p. 269–80.
67. Jadhav NA, Singh PK, Rhee HW, Bhattacharya B. Effect of variation of average pore size and specific surface area of ZnO electrode (WE) on efficiency of dye-sensitized solar cells. Nanoscale Res Lett. 2014;9(1):575.10.1186/1556-276X-9-575 ↗
68. Khezami L. ZnO nanoparticles: Surface and X-ray profile analysis. J Ovonic Res. 2018;14:1–11.
69. Maglad AM, Othuman Mydin MA, Dip Datta S, Tayeh BA. Assessing the mechanical, durability, thermal and microstructural properties of sea shell ash based lightweight foamed concrete. Constr Build Mater. 2023;402:133018.10.1016/j.conbuildmat.2023.133018 ↗
70. Nazari A, Riahi S. The Effects of ZnO2 nanoparticles on strength assessments and water permeability of concrete in different curing media. Mater Res. 2011;14:178–88.10.1590/S1516-14392011005000030 ↗
71. Ataie FF, Juenger MCG, Taylor-Lange SC, Riding KA. Comparison of the retarding mechanisms of zinc oxide and sucrose on cement hydration and interactions with supplementary cementitious materials. Cem Concr Res. 2015;72:128–36.10.1016/j.cemconres.2015.02.023 ↗
72. Bahari A, Sadeghi Nik A, Roodbari M, Mirshafiei E, Amiri B. Effect of silicon carbide nano dispersion on the mechanical and nano structural properties of cement. Natl Acad Sci Lett. 2015;38(4):361–4.10.1007/s40009-014-0316-6 ↗