journal article·2025-02-14

Laser welding on 10 mm thick grade 92 steel for USC applications: microstructure and mechanical properties

Dudekula Moulali, Amit Kumar, Krishna Guguloth, Sachin Sirohi, Chandra Shakher Tyagi, H. Natu, Chandan Pandey

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Fedorova I, Kipelova A, Belyakov A, Kaibyshev R. Microstructure evolution in an advanced 9 pct Cr martensitic steel during creep at 923 K (650 C). Metall Mater Trans A Phys Metall Mater Sci. 2013. https://doi.org/10.1007/s11661-012-1182-9.10.1007/s11661-012-1182-9 ↗
2. Dudko V, Belyakov A, Molodov D, Kaibyshev R. Microstructure evolution and pinning of boundaries by precipitates in a 9 pct Cr heat resistant steel during creep. Metall Mater Trans A Phys Metall Mater Sci. 2013. https://doi.org/10.1007/s11661-011-0899-1.10.1007/s11661-011-0899-1 ↗
3. Dak G, Guguloth K, Sirohi S, Adin MŞ, Pandey C. Creep and high-temperature tensile deformation behavior of the TIG welded P92/304L dissimilar steel weld joints. J Mater Eng Perform. 2024. https://doi.org/10.1007/s11665-024-09872-y.10.1007/s11665-024-09872-y ↗
4. Kumar A, Guguloth K, Pandey C. Creep rupture properties of dissimilar welded joint of ferritic/martensitic P92 steel and Inconel 617 alloy. Eng Fail Anal. 2024;164: 108725. https://doi.org/10.1016/j.engfailanal.2024.108725.10.1016/j.engfailanal.2024.108725 ↗
5. Wang X, Wang X, Zhang YL, Wang C, Li Y, Huang QS. Microstructure and creep fracture behavior in HR3C/T92 dissimilar steel welds. Mater Sci Eng A. 2021;799: 140128. https://doi.org/10.1016/j.msea.2020.140128.10.1016/j.msea.2020.140128 ↗
6. Xue W, Pan Q, Ren Y, Shang W, Zeng H, Liu H. Microstructure and type IV cracking behavior of HAZ in P92 steel weldment. Mater Sci Eng A. 2012;552:493–501. https://doi.org/10.1016/j.msea.2012.05.076.10.1016/j.msea.2012.05.076 ↗
7. Vidyarthy RS, Dwivedi DK. Activating flux tungsten inert gas welding for enhanced weld penetration. J Manuf Process. 2016;22:211–28. https://doi.org/10.1016/j.jmapro.2016.03.012.10.1016/j.jmapro.2016.03.012 ↗
8. Kumar A, Sirohi S, Singh M, Fydrych D, Pandey C. Microstructure and mechanical properties of a dissimilar metal welded joint of Inconel 617 and P92 steel with Inconel 82 buttering layer for AUSC boiler application. Int J Press Vessel Pip. 2024;209: 105196. https://doi.org/10.1016/j.ijpvp.2024.105196.10.1016/j.ijpvp.2024.105196 ↗
9. Pavan AR, Arivazhagan B, Zubairuddin M, Mahadevan S, Vasudevan M. Thermomechanical analysis of A-TIG and MP-TIG welding of 2.25Cr-1Mo steel considering phase transformation. J Mater Eng Perform. 2019;28:4903–17. https://doi.org/10.1007/s11665-019-04243-4.10.1007/s11665-019-04243-4 ↗
10. Maduraimuthu V, Vasantharaja P, Vasudevan M, Panigrahi BS. Microstructure and mechanical properties of 9Cr-0.5Mo-1.8W–VNb (P92) steel weld joints processed by fusion welding. Mater Sci Eng A. 2021;813:141186. https://doi.org/10.1016/j.msea.2021.141186.10.1016/j.msea.2021.141186 ↗
11. Pandey C, Mahapatra MM, Kumar P, Kumar S, Sirohi S. Effect of post weld heat treatments on microstructure evolution and type IV cracking behavior of the P91 steel welds joint. J Mater Process Technol. 2019;266:140–54. https://doi.org/10.1016/j.jmatprotec.2018.10.024.10.1016/j.jmatprotec.2018.10.024 ↗
12. Francis JA, Mazur W, Bhadeshia HKDH. Type IV cracking in ferritic power plant steels. Mater Sci Technol. 2006;22:1387–95. https://doi.org/10.1179/174328406X148778.10.1179/174328406X148778 ↗
13. Arivazhagan B, Vasudevan M. A study of microstructure and mechanical properties of grade 91 steel A-TIG weld joint. J Mater Eng Perform. 2013;22:3708–16. https://doi.org/10.1007/s11665-013-0694-9.10.1007/s11665-013-0694-9 ↗
14. Laha K, Chandravathi KS, Parameswaran P, Rao KBS, Mannan SL. Characterization of microstructures across the heat-affected zone of the modified 9Cr-1Mo weld joint to understand its role in promoting type IV cracking. Metall Mater Trans A. 2007;38:58–68. https://doi.org/10.1007/s11661-006-9050-0.10.1007/s11661-006-9050-0 ↗
15. Pandey C, Mahapatra MM. Effect of heat treatment on microstructure and hot impact toughness of various zones of P91 welded pipes. J Mater Eng Perform. 2016;25:2195–210. https://doi.org/10.1007/s11665-016-2064-x.10.1007/s11665-016-2064-x ↗
16. Pandey C, Mahapatra MM, Kumar P, Saini N, Thakre JG, Vidyarthy RS, et al. A brief study on δ-ferrite evolution in dissimilar P91 and P92 steel weld joint and their effect on mechanical properties. Arch Civ Mech Eng. 2018;18:713–22. https://doi.org/10.1016/j.acme.2017.12.002.10.1016/j.acme.2017.12.002 ↗
17. Čiripová L, Falat L, Homolová V, Džupon M, Džunda R, Dlouhỳ I. The effect of electrolytic hydrogenation on mechanical properties of T92 steel weldments under different PWHT conditions. Mater (Basel). 2020. https://doi.org/10.3390/MA13163653.10.3390/MA13163653 ↗
18. Venkata KA, Kumar S, Dey HC, Smith DJ, Bouchard PJ, Truman CE. Study on the effect of post weld heat treatment parameters on the relaxation of welding residual stresses in electron beam welded P91 steel plates. Proc Eng. 2014;86:223–33. https://doi.org/10.1016/j.proeng.2014.11.032.10.1016/j.proeng.2014.11.032 ↗
19. Sireesha M, Albert SK, Sundaresan S. Microstructure and mechanical properties of weld fusion zones in modified 9Cr-1Mo steel. J Mater Eng Perform. 2001;10:320–30. https://doi.org/10.1361/105994901770345033.10.1361/105994901770345033 ↗
20. Saini N, Mulik RS, Mahapatra MM. Influence of filler metals and PWHT regime on the microstructure and mechanical property relationships of CSEF steels dissimilar welded joints. Int J Press Vessel Pip. 2019;170:1–9. https://doi.org/10.1016/j.ijpvp.2019.01.005.10.1016/j.ijpvp.2019.01.005 ↗
21. Sirohi S, Kumar A, Soni S, Dak G, Kumar S, Świerczyńska A, et al. Influence of PWHT parameters on the mechanical properties and microstructural behavior of multi-pass GTAW joints of P92 steel. Mater (Basel). 2022. https://doi.org/10.3390/ma15124045.10.3390/ma15124045 ↗
22. Saini N, Mulik RS, Mahapatra MM, Kannan R, Sharma NK, Li L. Dissolution of δ-ferrite and its effect on mechanical properties of P92 steel welds. Mater Sci Eng A. 2020;796: 139370. https://doi.org/10.1016/j.msea.2020.139370.10.1016/j.msea.2020.139370 ↗
23. Pandey C, Mahapatra MM, Kumar P, Saini N. Comparative study of autogenous tungsten inert gas welding and tungsten arc welding with filler wire for dissimilar P91 and P92 steel weld joint. Mater Sci Eng A. 2018;712:720–37. https://doi.org/10.1016/j.msea.2017.12.039.10.1016/j.msea.2017.12.039 ↗
24. Vidyarthy RS, Dwivedi DK. Microstructural and mechanical properties assessment of the P91 A-TIG weld joints. J Manuf Process. 2018;31:523–35. https://doi.org/10.1016/j.jmapro.2017.12.012.10.1016/j.jmapro.2017.12.012 ↗
25. Sirohi S, Gupta A, Pandey C, Vidyarthy RS, Guguloth K, Natu H. Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel. Opt Laser Technol. 2022;147: 107610. https://doi.org/10.1016/j.optlastec.2021.107610.10.1016/j.optlastec.2021.107610 ↗
26. Sirohi S, Pandey SM, Tiwari V, Bhatt D, Fydrych D, Pandey C. Impact of laser beam welding on mechanical behaviour of 2.25Cr–1Mo (P22) steel. Int J Press Vessel Pip. 2023;201:104867. https://doi.org/10.1016/j.ijpvp.2022.104867.10.1016/j.ijpvp.2022.104867 ↗
27. Saini N, Pandey C, Mahapatra MM. Characterization and evaluation of mechanical properties of CSEF P92 steel for varying normalizing temperature. Mater Sci Eng A. 2017;688:250–61. https://doi.org/10.1016/j.msea.2017.02.022.10.1016/j.msea.2017.02.022 ↗
28. ASTM E8. ASTM E8/E8M standard test methods for tension testing of metallic materials 1. Annu B ASTM Stand 4 2010:1–27. https://doi.org/10.1520/E0008.10.1520/E0008 ↗
29. ASTM E 23–12c. Standard test methods for notched bar impact testing of metallic materials. Standards 2012:1–25. https://doi.org/10.1520/E0023-23A.10.1520/E0023-23A ↗
30. Vander Voort GF. Metallography, principles and practice. ASM Int. 1999.
31. Panait CG, Bendick W, Fuchsmann A, Gourgues-Lorenzon AF, Besson J. Study of the microstructure of the Grade 91 steel after more than 100,000 h of creep exposure at 600 °C. Int J Press Vessel Pip. 2010;87:326–35. https://doi.org/10.1016/j.ijpvp.2010.03.017.10.1016/j.ijpvp.2010.03.017 ↗
32. Kumar A, Pandey C. Development and evaluation of dissimilar gas tungsten arc-welded joint of P92 steel/inconel 617 alloy for advanced ultra-supercritical boiler applications. Metall Mater Trans A. 2022;53:3245–73. https://doi.org/10.1007/s11661-022-06723-0.10.1007/s11661-022-06723-0 ↗
33. Pandey C, Mahapatra MM, Kumar P, Saini N. Some studies on P91 steel and their weldments. J Alloys Compd. 2018;743:332–64. https://doi.org/10.1016/j.jallcom.2018.01.120.10.1016/j.jallcom.2018.01.120 ↗
34. Pandey C, Mohan Mahapatra M, Kumar P, Thakre JG, Saini N. Role of evolving microstructure on the mechanical behaviour of P92 steel welded joint in as-welded and post weld heat treated state. J Mater Process Technol. 2019;263:241–55. https://doi.org/10.1016/j.jmatprotec.2018.08.032.10.1016/j.jmatprotec.2018.08.032 ↗
35. Shanmugarajan B, Padmanabham G, Kumar H, Albert SK, Bhaduri AK. Autogenous laser welding investigations on modified 9Cr–1Mo (P91) steel. Sci Technol Weld Join. 2011. https://doi.org/10.1179/1362171811Y.0000000035.10.1179/1362171811Y.0000000035 ↗
36. Jeya Ganesh B, Raju S, Rai AK, Mohandas E, Vijayalakshmi M, Rao KBS, et al. Differential scanning calorimetry study of ffusional and martensitic phase transformations in some 9 wt-%Cr low carbon erritic steels. Mater Sci Technol. 2011;27:500–12. https://doi.org/10.1179/026708309X12506933873260.10.1179/026708309X12506933873260 ↗
37. Sam S, Das CR, Ramasubbu V, Albert SK, Bhaduri AK, Jayakumar T, et al. Delta ferrite in the weld metal of reduced activation ferritic martensitic steel. J Nucl Mater. 2014;455:343–8. https://doi.org/10.1016/j.jnucmat.2014.07.008.10.1016/j.jnucmat.2014.07.008 ↗
38. Tao X, Gu J, Han L. Characterization of precipitates in X12CrMoWVNbN10-1-1 steel during heat treatment. J Nucl Mater. 2014;452:557–64. https://doi.org/10.1016/j.jnucmat.2014.06.018.10.1016/j.jnucmat.2014.06.018 ↗
39. Nandha Kumar E, Kottada RS, Janaki Ram GD. A critical understanding on the microstructure and creep failure of Super304H/T92 dissimilar multilayer welds. Weld World. 2024;68:227–46. https://doi.org/10.1007/s40194-023-01645-w.10.1007/s40194-023-01645-w ↗
40. Hurtado-Noreña C, Danón CA, Luppo MI, Bruzzoni P. Evolution of minor phases in a P91 steel normalized and tempered at different temperatures. Proc Mater Sci. 2015;8:1089–98. https://doi.org/10.1016/j.mspro.2015.04.172.10.1016/j.mspro.2015.04.172 ↗
41. Lee JS, Maruyama K. Mechanism of microstructural deterioration preceding type IV failure in weldment of Mod.9Cr-1Mo steel. Met Mater Int. 2015;21:639–45. https://doi.org/10.1007/s12540-015-4569-5.10.1007/s12540-015-4569-5 ↗
42. Dak G, Guguloth K, Vidyarthy RS, Fydrych D, Pandey C. Creep rupture study of dissimilar welded joints of P92 and 304L steels. Weld World. 2024. https://doi.org/10.1007/s40194-024-01757-x.10.1007/s40194-024-01757-x ↗
43. Akram J, Kalvala PR, Misra M, Charit I. Creep behavior of dissimilar metal weld joints b.etween P91 and AISI 304. Mater Sci Eng A. 2017;688:396–406. https://doi.org/10.1016/j.msea.2017.02.026.10.1016/j.msea.2017.02.026 ↗
44. Zhang Y, Li K, Cai Z, Pan J. Creep rupture properties of dissimilar metal weld between Inconel 617B and modified 9%Cr martensitic steel. Mater Sci Eng A. 2019;764: 138185. https://doi.org/10.1016/j.msea.2019.138185.10.1016/j.msea.2019.138185 ↗
45. Shin KY, Lee JW, Han JM, Lee KW, Kong BO, Hong HU. Transition of creep damage region in dissimilar welds between Inconel 740H Ni-based superalloy and P92 ferritic/martensitic steel. Mater Charact. 2018;139:144–52. https://doi.org/10.1016/j.matchar.2018.02.039.10.1016/j.matchar.2018.02.039 ↗
46. Wang Y, Kannan R, Li L. Insight into type IV cracking in Grade 91 steel weldments. Mater Des. 2020;190: 108570. https://doi.org/10.1016/j.matdes.2020.108570.10.1016/j.matdes.2020.108570 ↗
47. Pandey C, Mahapatra MM. Effect of groove design and post-weld heat treatment on microstructure and mechanical properties of P91 steel weld. J Mater Eng Perform. 2016;25:2761–75. https://doi.org/10.1007/s11665-016-2127-z.10.1007/s11665-016-2127-z ↗
48. Zhao L, Jing H, Xu L, An J, Xiao G, Xu D, et al. Investigation on mechanism of type IV cracking in P92 steel at 650 °C. J Mater Res. 2011;26:934–43. https://doi.org/10.1557/jmr.2011.11.10.1557/jmr.2011.11 ↗
49. Wang Y, Li L. Microstructure evolution of fine grained heat affected zone in type IV failure of P91 welds. Weld J. 2016;95:27–36.
50. Xue W, Qian-gang P, Yao-yao R, Wei S, Hui-qiang Z, Hong L. Microstructure and type IV cracking behavior of HAZ in P92 steel weldment. Mater Sci Eng A. 2012;552:493–501. https://doi.org/10.1016/j.msea.2012.05.076.10.1016/j.msea.2012.05.076 ↗
51. Dak G, Guguloth K, Bhattacharyya A, Kumar P, Pandey C. Failure study of creep and high-temperature tensile tested tungsten inert gas welded P92 steel and AISI 304L steel dissimilar weld joints. J Mater Eng Perform. 2023. https://doi.org/10.1007/s11665-023-09070-2.10.1007/s11665-023-09070-2 ↗
52. Dak G, Pandey C. A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application. J Manuf Process. 2020;58:377–406. https://doi.org/10.1016/j.jmapro.2020.08.019.10.1016/j.jmapro.2020.08.019 ↗
53. Arivazhagan B, Vasudevan M. A comparative study on the effect of GTAW processes on the microstructure and mechanical properties of P91 steel weld joints. J Manuf Process. 2014;16:305–11. https://doi.org/10.1016/j.jmapro.2014.01.003.10.1016/j.jmapro.2014.01.003 ↗
54. Kumar S, Pandey C, Goyal A. A microstructural and mechanical behavior study of heterogeneous P91 welded joint. Int J Press Vessel Pip. 2020;185: 104128. https://doi.org/10.1016/j.ijpvp.2020.104128.10.1016/j.ijpvp.2020.104128 ↗
55. Blach J, Falat L, Ševc P. Fracture characteristics of thermally exposed 9Cr-1Mo steel after tensile and impact testing at room temperature. Eng Fail Anal. 2009;16:1397–403. https://doi.org/10.1016/j.engfailanal.2008.09.003.10.1016/j.engfailanal.2008.09.003 ↗
56. Li L, Deceuster A, Griffiths B. Table 2—average impact energy values for various simulated HAZs, and the base and filler metals in both the as-welded and heat-treated conditions. Weld Res. 2013;92:80–7.
57. Standard B. Welding consumables—covered electrodes for manual metal arc welding of creep—resisting steels—Classification (ISO 3580:2017). 2017.
58. Sireesha M, Albert SK, Sundaresan S. Influence of high-temperature exposure on the microstructure and mechanical properties of dissimilar metal welds between modified 9Cr-1Mo steel and Alloy 800. Metall Mater Trans A Phys Metall Mater Sci. 2005;36:1495–506. https://doi.org/10.1007/s11661-005-0241-x.10.1007/s11661-005-0241-x ↗