Static and dynamic impact performance optimization of CFRP/Al bolt joint coupling structure–lay-up–connection parameters
Source abstract
Abstract
Static shearing, drawing, and dynamic impact test schemes of carbon fiber reinforced polymer (CFRP)/aluminum alloy (Al) bolt joint were designed. The finite element model of the CFRP/Al bolt joint was established, and the failure modes of the joints under the static and dynamic impact conditions were analyzed. The structure, lay-up, and connection parameters of the joint were defined as design variables, and the static and dynamic impact performance indicators of the joint and the lay-up numbers of the CFRP sheet were defined as optimization objectives. Integrated multiobjective optimization was conducted for joints, employing the radial basis function neural network (RBFNN) surrogate model, elitist nondominated sorting genetic (NSGA-II) algorithm, and entropy-technique for order preference by similarity to ideal solution (E-TOPSIS) decision method. The best trade-off solution was obtained, and the optimal design variables were determined. The optimized joint was fabricated, and static and dynamic impact tests were carried out. The test and simulation results were compared to verify the effectiveness of simulation and optimization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Yoon D, Kim S, Kim J, Doh Y. Study on bearing strength and failure mode of a carbon-epoxy composite laminate for designing bolted joint structures. Compos Struct. 2020;239: 112023. https://doi.org/10.1016/j.compstruct.2020.112023.10.1016/j.compstruct.2020.112023 ↗
2. Shan M, Zhao L, Liu F, Qi D, Zhang J. Revealing the competitive fatigue failure behaviour of CFRP-aluminum two-bolt, double-lap joints. Compos Struct. 2020;244: 112166. https://doi.org/10.1016/j.compstruct.2020.112166.10.1016/j.compstruct.2020.112166 ↗
3. Hu XF, Haris A, Ridha M, Tan VBC, Tay TE. Progressive failure of bolted single-lap joints of woven fibre-reinforced composites. Compos Struct. 2018;189:443–54. https://doi.org/10.1016/j.compstruct.2018.01.104.10.1016/j.compstruct.2018.01.104 ↗
4. Mandal B, Chakrabarti A. Numerical failure assessment of multi-bolt FRP composite joints with varying sizes and preloads of bolts. Compos Struct. 2018;187:169–78. https://doi.org/10.1016/j.compstruct.2017.12.048.10.1016/j.compstruct.2017.12.048 ↗
5. Zhai Y, Li D, Li X, Wang L, Yin Y. An experimental study on the effect of bolt-hole clearance and bolt torque on single-lap, countersunk composite joints. Compos Struct. 2015;127:411–9. https://doi.org/10.1016/j.compstruct.2015.03.028.10.1016/j.compstruct.2015.03.028 ↗
6. Hu J, Zhang K, Yang Q, Cheng H, Liu P, Yang Y. An experimental study on mechanical response of single-lap bolted CFRP composite interference-fit joints. Compos Struct. 2018;196:76–88. https://doi.org/10.1016/j.compstruct.2018.05.016.10.1016/j.compstruct.2018.05.016 ↗
7. Ahmad H, Crocombe AD, Smith PA. Strength prediction in CFRP woven laminate bolted double-lap joints under quasi-static loading using XFEM. Compos Part A Appl Sci Manuf. 2014;56:192–202. https://doi.org/10.1016/j.compositesa.2013.10.012.10.1016/j.compositesa.2013.10.012 ↗
8. Wang P, He R, Chen H, Zhu X, Zhao Q, Fang D. A novel predictive model for mechanical behavior of single-lap GFRP composite bolted joint under static and dynamic loading. Compos Part B Eng. 2015;79:322–30. https://doi.org/10.1016/j.compositesb.2015.04.053.10.1016/j.compositesb.2015.04.053 ↗
9. Montagne B, Lachaud F, Paroissien E, Martini D, Congourdeau F. Failure analysis of single lap composite laminate bolted joints: comparison of experimental and numerical tests. Compos Struct. 2020;238: 111949. https://doi.org/10.1016/j.compstruct.2020.111949.10.1016/j.compstruct.2020.111949 ↗
10. Tang Y, Zhou Z, Pan S, Xiong J, Guo Y. Mechanical property and failure mechanism of 3D Carbon-Carbon braided composites bolted joints under unidirectional tensile loading. Mater Des. 2015;65:243–53. https://doi.org/10.1016/j.matdes.2014.08.073.10.1016/j.matdes.2014.08.073 ↗
11. Kaybal HB, Ulus H, Eskizeybek V, Avcl A. An experimental study on low velocity impact performance of bolted composite joints part 1: influence of halloysite nanotubes on dynamic loading response. Compos Struct. 2021;258: 113415. https://doi.org/10.1016/j.compstruct.2020.113415.10.1016/j.compstruct.2020.113415 ↗
12. Kaybal HB, Ulus H, Eskizeybek V, Avci A. An experimental study on low velocity impact performance of bolted composite joints-part 2: Influence of long-term seawater aging. Compos Struct. 2021;272: 113571. https://doi.org/10.1016/j.compstruct.2021.113571.10.1016/j.compstruct.2021.113571 ↗
13. Pearce GM, Johnson AF, Thomson RS, Kelly DW. Experimental Investigation of dynamically loaded bolted joints in carbon fibre composite structures. Appl Compos Mater. 2010;17(3):271–91. https://doi.org/10.1007/s10443-009-9120-8.10.1007/s10443-009-9120-8 ↗
14. Pearce GM, Johnson AF, Thomson RS, Kelly DW. Numerical investigation of dynamically loaded bolted joints in carbon fibre composite structures. Appl Compos Mater. 2010;17(3):329–46. https://doi.org/10.1007/s10443-009-9123-5.10.1007/s10443-009-9123-5 ↗
15. Guo Z, Li Z, Zhu H, Cui J, Li D, Li Y, et al. Numerical simulation of bolted joint composite laminates under low-velocity impact. Mater Today Commun. 2020;23:1000891. https://doi.org/10.1016/j.mtcomm.2020.100891.10.1016/j.mtcomm.2020.100891 ↗
16. Liu L, Wang X, Wu Z, Keller T. Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints. Compos Struct. 2020;248: 112535. https://doi.org/10.1016/j.compstruct.2020.112535.10.1016/j.compstruct.2020.112535 ↗
17. Kradinov V, Madenci E, Ambur DR. Application of genetic algorithm for optimum design of bolted composite lap joints. Compos Struct. 2007;77(2):148–59. https://doi.org/10.1016/j.compstruct.2005.06.009.10.1016/j.compstruct.2005.06.009 ↗
18. Zhao S, Li D, Xiang J. Multi-objective optimum of composite bolted joints by using the multi-layer convex hull method. Struct Multidiscip Optim. 2018;58(3):1233–42. https://doi.org/10.1007/s00158-018-1964-9.10.1007/s00158-018-1964-9 ↗
19. Liu F, Yao W, Shi X, Zhao L, Zhang J. Bearing failure optimization of composite double-lap bolted joints based on a three-step strategy marked by feasible region reduction and model decoupling. Cmc-Comput Mater Continua. 2020;62(2):977–99. https://doi.org/10.32604/cmc.2020.07184.10.32604/cmc.2020.07184 ↗
20. Xie M. Joints for composites materials. Shanghai: Shanghai Jiaotong University Press; 2016.
21. Li X, Cheng X, Guo X, Liu S, Wang Z. Tensile properties of a hybrid bonded/bolted joint: parameter study. Compos Struct. 2020;245: 112329. https://doi.org/10.1016/j.compstruct.2020.112329.10.1016/j.compstruct.2020.112329 ↗
22. El Masnaoui W, DaidiE A, Lachaud F, Paleczny C. Semi-analytical model development for preliminary study of 3D woven composite/metallic flange bolted assemblies. Compos Struct. 2021;255: 112906. https://doi.org/10.1016/j.compstruct.2020.112906.10.1016/j.compstruct.2020.112906 ↗
23. Ghugal YM, Shimpi RP. A review of refined shear deformation theories for isotropic and anisotropic laminated beams. J Reinf Plast Compos. 2001;20(3):255–72. https://doi.org/10.1106/n95g-era1-a1cm-rd7e.10.1106/n95g-era1-a1cm-rd7e ↗
24. Kassapoglou C. Design and analysis of composite structures: with applications to aerospace structures. New York: Wiley; 2010.10.1002/9780470972700 ↗
25. Liu PF, Liao BB, Jia LY, Peng XQ. Finite element analysis of dynamic progressive failure of carbon fiber composite laminates under low velocity impact. Compos Struct. 2016;149:408–22. https://doi.org/10.1016/j.compstruct.2016.04.012.10.1016/j.compstruct.2016.04.012 ↗
26. Schön J. Coefficient of friction for aluminum in contact with a carbon fiber epoxy composite. Tribol Int. 2004;37(5):395–404. https://doi.org/10.1016/j.triboint.2003.11.008.10.1016/j.triboint.2003.11.008 ↗
27. McCarthy CT, McCarthy MA, Stanley WF, Lawlor VP. Experiences with modeling friction in composite bolted joints. J Compos Mater. 2005;39(21):1881–908. https://doi.org/10.1177/0021998305051805.10.1177/0021998305051805 ↗
28. Bezerra LM, Bonilla J, Silva WA, Matias WT. Experimental and numerical studies of bolted T-stub steel connection with different flange thicknesses connected to a rigid base. Eng Struct. 2020;218: 110770. https://doi.org/10.1016/j.engstruct.2020.110770.10.1016/j.engstruct.2020.110770 ↗
29. Hu D, Papadopoulos J, Adams GG. Prying action in a bolted cantilever analyzed as a receding contact problem. J Eng Mech. 2019;145(4):04019018. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001593.10.1061/(ASCE)EM.1943-7889.0001593 ↗
30. Rad MA, Khalkhali A. Crashworthiness multi-objective optimization of the thin-walled tubes under probabilistic 3D oblique load. Mater Des. 2018;156:538–57. https://doi.org/10.1016/j.matdes.2018.07.008.10.1016/j.matdes.2018.07.008 ↗
31. Wang D, Xu W, Wang Y, Gao J. Design and optimization of tapered carbon-fiber-reinforced polymer rim for carbon/aluminum assembled wheel. Polym Compos. 2021;42(1):253–70. https://doi.org/10.1002/pc.25822.10.1002/pc.25822 ↗
32. Deb K, Pratap A, Agarwal S, Meyarivan T. A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput. 2002;6(2):182–97. https://doi.org/10.1109/4235.996017.10.1109/4235.996017 ↗
33. Wang D, Jiang R, Wu Y. A hybrid method of modified NSGA-II and TOPSIS for lightweight design of parameterized passenger car sub-frame. J Mech Sci Technol. 2016;30(11):4909–17. https://doi.org/10.1007/s12206-016-1010-z.10.1007/s12206-016-1010-z ↗
34. Li J, Zuo W, Jiaqiang E, Zhang Y, Li Q, Sun K, et al. Multi-objective optimization of mini U-channel cold plate with SiO2 nanofluid by RSM and NSGA-II. Energy. 2022;242: 123039. https://doi.org/10.1016/j.energy.2021.123039.10.1016/j.energy.2021.123039 ↗
35. Garcia Marrero LE, Arzola RJ. Web-based tool for the decision making in photovoltaic/wind farms planning with multiple objectives. Renewable Energy. 2021;179:2224–34. https://doi.org/10.1016/j.renene.2021.08.022.10.1016/j.renene.2021.08.022 ↗
36. Liu Y, Wan X, Xu W, Shi L, Deng G, Bai Z. An intelligent method for accident reconstruction involving car and e-bike coupling automatic simulation and multi-objective optimizations. Accident Anal Prev. 1800;164: 106476. https://doi.org/10.1016/j.aap.2021.106476.10.1016/j.aap.2021.106476 ↗
37. Yoon KP, Hwang CL. Multiple attribute decision making: an introduction. Thousands Oaks: Sage Publication; 1995.10.4135/9781412985161 ↗