journal article·2025-05-29Open access

Physico-mechanical properties of dolomite-based geopolymers produced with zeolite aggregates

Mehmet Kaya, Muhammed Bayram, Saddam Hossein, Jianzhuang Xiao, Osman Gencel, Togay Ozbakkaloglu

Abstract

Abstract In response to the growing global demand for environmentally friendly and sustainable construction materials, this study focuses on developing dolomite-based alkali-activated geopolymers, leveraging abundant mineral resources such as dolomite and zeolite. The research aims to address key international challenges in reducing the environmental impact of the construction industry while maintaining high-performance standards. Dolomite, a widely available mineral rich in calcium and magnesium carbonates, combined with the versatile properties of zeolite, presents significant potential for advancing sustainable building practices. Despite their availability, limited research has explored the integration of these materials in alkali-activated systems. This study investigates how varying activator ratios (10%, 12%, 14%, 16%, 18%, and 20% Na by weight) and activation temperatures (20 °C, 75 °C, 95 °C, and 115 °C) affect the physical and mechanical properties of dolomite-based geopolymers. Results show that higher Na dosages generally increased unit weights, while higher activation temperatures decreased unit weight. The highest compressive strength was achieved with 20% Na and an activation temperature of 115 °C, highlighting the importance of alkali concentration and thermal energy in the geopolymerization process. By optimizing activator ratios and activation temperatures, this study provides insights into how dolomite and zeolite can be utilized to develop high-performance, low-carbon construction materials. The findings contribute to international efforts to create more sustainable construction solutions, reducing reliance on conventional cement and promoting the use of abundant and eco-friendly mineral resources.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Miller SA, Horvath A, Monteiro PJ. Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%. Environ Res Lett. 2016;11(7):074029.10.1088/1748-9326/11/7/074029 ↗
2. Cohen B. Urbanization, City growth, and the New United Nations development agenda. Cornerstone. 2015;3(2):4–7.
3. Doyle MW, Havlick DG. Infrastructure and the environment. Annu Rev Environ Resour. 2009;34:349–73.10.1146/annurev.environ.022108.180216 ↗
4. Müller N, Harnisch J. A blueprint for a climate-friendly cement industry: how to turn around the trend of cement related emissions in the developing world. Gland: World Wide Fund for Nature; 2008. p. 101.
5. Kelly T, Van Oss H. Historical statistics for mineral and material commodities: cement statistics. Reston: USGS; 2014.
6. F. Faostat. Food and Agriculture Organization statistical database. Retrieved Feb, 2014.
7. Kuranlı ÖF, Bayram M, Niş A, Uysal M, Ozbakkaloglu T. Chapter 20—Recycling of various types of slags as SCMs and aggregates. In: Wang L, Tsang D, Yan J, editors. Treatment and utilization of combustion and incineration residues. Elsevier; 2024. p. 351–83.10.1016/B978-0-443-21536-0.00034-4 ↗
8. Kaya M, Köksal F, Bayram M, Nodehi M, Gencel O, Ozbakkaloglu T. The effect of marble powder on physico-mechanical and microstructural properties of kaolin-based geopolymer pastes. Struct Concr. 2023;24(5):6485–504.10.1002/suco.202201010 ↗
9. Zeng L, Cao D-Y, Xu Y, Fan C-W, Peng X-Q. Novel method for preparation of calcined kaolin intercalation compound-based geopolymer. Appl Clay Sci. 2014;101:637–42.10.1016/j.clay.2014.09.034 ↗
10. Danish A, et al. Sustainability benefits and commercialization challenges and strategies of geopolymer concrete: a review. J Build Eng. 2022;58:105005. https://doi.org/10.1016/j.jobe.2022.105005.10.1016/j.jobe.2022.105005 ↗
11. Bayram M, Ozbakkaloglu T. 6—Mixing methods and fresh state properties of fiber-reinforced one-part alkali-activated composites. In: Çevik A, Niş A, editors. Advanced fiber-reinforced alkali-activated composites. Elsevier; 2023. p. 135–60.10.1016/B978-0-443-15301-3.00012-9 ↗
12. Kumar A, Saravanan TJ, Bisht K, Kabeer KSA. A review on the utilization of red mud for the production of geopolymer and alkali activated concrete. Constr Build Mater. 2021;302:124170.10.1016/j.conbuildmat.2021.124170 ↗
13. Qureshi LA, Ali B, Ali A. Combined effects of supplementary cementitious materials (silica fume, GGBS, fly ash and rice husk ash) and steel fiber on the hardened properties of recycled aggregate concrete. Constr Build Mater. 2020;263:120636.10.1016/j.conbuildmat.2020.120636 ↗
14. Bayram M, Kuranlı ÖF, Niş A, Ozbakkaloglu T. Recycling of pulverized fuel ash as supplementary cementitious materials (SCMs) and aggregates in concrete production. In: Treatment and utilization of combustion and incineration residues. Elsevier; 2024. p. 249–68.10.1016/B978-0-443-21536-0.00004-6 ↗
15. Singh B, Ishwarya G, Gupta M, Bhattacharyya SK. Geopolymer concrete: a review of some recent developments. Constr Build Mater. 2015;85:78–90. https://doi.org/10.1016/j.conbuildmat.2015.03.036.10.1016/j.conbuildmat.2015.03.036 ↗
16. Lori IS, Toufigh MM, Toufigh V. Improvement of poorly graded sandy soil by using copper mine tailing dam sediments-based geopolymer and silica fume. Constr Build Mater. 2021;281:122591.10.1016/j.conbuildmat.2021.122591 ↗
17. Cohen E, Peled A, Bar-Nes G. Dolomite-based quarry-dust as a substitute for fly-ash geopolymers and cement pastes. J Clean Prod. 2019;235:910–9. https://doi.org/10.1016/j.jclepro.2019.06.261.10.1016/j.jclepro.2019.06.261 ↗
18. Kaya M, Köksal F, Nodehi M, Bayram M, Gencel O, Ozbakkaloglu T. The effect of sodium and magnesium sulfate on physico-mechanical and microstructural properties of kaolin and ceramic powder-based geopolymer mortar. Sustainability. 2022;14(20):13496. https://doi.org/10.3390/su142013496.10.3390/su142013496 ↗
19. Assi LN, Carter K, Deaver E, Ziehl P. Review of availability of source materials for geopolymer/sustainable concrete. J Clean Prod. 2020;263:121477. https://doi.org/10.1016/j.jclepro.2020.121477.10.1016/j.jclepro.2020.121477 ↗
20. Dombrowski K, Buchwald A, Weil M. The influence of calcium content on the structure and thermal performance of fly ash based geopolymers. J Mater Sci. 2007;42(9):3033–43.10.1007/s10853-006-0532-7 ↗
21. Yip CK, Lukey GC, Provis JL, Van Deventer JS. Effect of calcium silicate sources on geopolymerisation. Cem Concr Res. 2008;38(4):554–64.10.1016/j.cemconres.2007.11.001 ↗
22. Yip CK, Provis JL, Lukey GC, van Deventer JSJ. Carbonate mineral addition to metakaolin-based geopolymers. Cem Concr Compos. 2008;30(10):979–85. https://doi.org/10.1016/j.cemconcomp.2008.07.004.10.1016/j.cemconcomp.2008.07.004 ↗
23. Azimi E, Abdullah M, Ming L, Yong H, Hussin K, Aziz I. Review of dolomite as precursor of geopolymer materials. MATEC Web Conf. 2016;78:01090.10.1051/matecconf/20167801090 ↗
24. Temiz H, Kantarcı F, Emin İnceer M. Influence of blast-furnace slag on behaviour of dolomite used as a raw material of MgO-type expansive agent. Constr Build Mater. 2015;94:528–35. https://doi.org/10.1016/j.conbuildmat.2015.07.059.10.1016/j.conbuildmat.2015.07.059 ↗
25. Xu H, Van Deventer JSJ. The geopolymerisation of alumino-silicate minerals. Int J Miner Process. 2000;59(3):247–66. https://doi.org/10.1016/S0301-7516(99)00074-5.10.1016/S0301-7516(99)00074-5 ↗
26. Yip CK, Lukey GC, Provis JL, van Deventer JSJ. Effect of calcium silicate sources on geopolymerisation. Cem Concr Res. 2008;38(4):554–64. https://doi.org/10.1016/j.cemconres.2007.11.001.10.1016/j.cemconres.2007.11.001 ↗
27. van Deventer JSJ, Provis JL, Duxson P, Lukey GC. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products. J Hazard Mater. 2007;139(3):506–13. https://doi.org/10.1016/j.jhazmat.2006.02.044.10.1016/j.jhazmat.2006.02.044 ↗
28. Zarina Y, Kamarudin H, Al Bakri A, Ismail KN, Abd Razak R. Influence of dolomite on the mechanical properties of boiler ash geopolymer paste. Key Eng Mater. 2014;594:8–12.
29. Azimi EA, et al. Strength development and elemental distribution of dolomite/fly ash geopolymer composite under elevated temperature. Materials. 2020;13(4):1015.10.3390/ma13041015 ↗
30. Phoo-ngernkham T, Maegawa A, Mishima N, Hatanaka S, Chindaprasirt P. Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer. Constr Build Mater. 2015;91:1–8. https://doi.org/10.1016/j.conbuildmat.2015.05.001.10.1016/j.conbuildmat.2015.05.001 ↗
31. Memon FA, Nuruddin MF, Khan S, Shafiq N, Ayub T. Effect of sodium hydroxide concentration on fresh properties and compressive strength of self-compacting geopolymer concrete. J Eng Sci Technol. 2013;8(1):44–56.
32. Rangan BV. Fly ash-based geopolymer concrete. CRC Press; 2008.
33. Fernández-Jiménez A, Palomo A, Criado M. Microstructure development of alkali-activated fly ash cement: a descriptive model. Cem Concr Res. 2005;35(6):1204–9.10.1016/j.cemconres.2004.08.021 ↗
34. Matalkah F, Aqel R, Ababneh A. Enhancement of the mechanical properties of kaolin geopolymer using sodium hydroxide and calcium oxide. Procedia Manuf. 2020;44:164–71. https://doi.org/10.1016/j.promfg.2020.02.218.10.1016/j.promfg.2020.02.218 ↗
35. Król M. Hydrothermal synthesis of zeolite aggregate with potential use as a sorbent of heavy metal cations. J Mol Struct. 2019;1183:353–9. https://doi.org/10.1016/j.molstruc.2019.02.011.10.1016/j.molstruc.2019.02.011 ↗
36. Erdogmus E, et al. Effect of molding pressure and firing temperature on the properties of ceramics from natural zeolite. Constr Build Mater. 2023;402:132960. https://doi.org/10.1016/j.conbuildmat.2023.132960.10.1016/j.conbuildmat.2023.132960 ↗
37. Rożek P, Król M, Mozgawa W. Geopolymer-zeolite composites: a review. J Clean Prod. 2019;230:557–79. https://doi.org/10.1016/j.jclepro.2019.05.152.10.1016/j.jclepro.2019.05.152 ↗
38. Król M, Mozgawa W, Jastrzębski W, Barczyk K. Application of IR spectra in the studies of zeolites from D4R and D6R structural groups. Microporous Mesoporous Mater. 2012;156:181–8. https://doi.org/10.1016/j.micromeso.2012.02.040.10.1016/j.micromeso.2012.02.040 ↗
39. Shahmansouri AA, Nematzadeh M, Behnood A. Mechanical properties of GGBFS-based geopolymer concrete incorporating natural zeolite and silica fume with an optimum design using response surface method. J Build Eng. 2021;36:102138.10.1016/j.jobe.2020.102138 ↗
40. Yousef RI, El-Eswed B, Alshaaer M, Khalili F, Khoury H. The influence of using Jordanian natural zeolite on the adsorption, physical, and mechanical properties of geopolymers products. J Hazard Mater. 2009;165(1):379–87. https://doi.org/10.1016/j.jhazmat.2008.10.004.10.1016/j.jhazmat.2008.10.004 ↗
41. Kaya M. The effect of micro-SiO2 and micro-Al2O3 additive on the strength properties of ceramic powder-based geopolymer pastes. J Mater Cycles Waste Manag. 2022;24(1):333–50.10.1007/s10163-021-01323-3 ↗
42. Atiş C, Görür E, Karahan O, Bilim C, İlkentapar S, Luga E. Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration. Constr Build Mater. 2015;96:673–8.10.1016/j.conbuildmat.2015.08.089 ↗
43. Atabey İİ, Karahan O, Bilim C, Atiş CD. The influence of activator type and quantity on the transport properties of class F fly ash geopolymer. Constr Build Mater. 2020;264:120268.10.1016/j.conbuildmat.2020.120268 ↗
44. Kaya M, Koksal F, Gencel O, Munir MJ, Kazmi SMS. Influence of micro Fe2O3 and MgO on the physical and mechanical properties of the zeolite and kaolin based geopolymer mortar. J Build Eng. 2022;52:104443. https://doi.org/10.1016/j.jobe.2022.104443.10.1016/j.jobe.2022.104443 ↗
45. Kaya M, Köksal F. Effect of cement additive on physical and mechanical properties of high calcium fly ash geopolymer mortars. Struct Concr. 2021;22:E452–65.10.1002/suco.202000235 ↗
46. Kaya M, Uysal M, Yilmaz K, Karahan O, Atis CD. Mechanical properties of class C and F fly ash geopolymer mortars.
47. A. ASTM, C138/C138M-17a. C138/C138M-17a, standard test method for density (unit weight), yield, and air content (gravimetric) of concrete. West Conshohocken: ASTM International; 2017.
48. A. ASTM C642. Standard test method for density, absorption, and voids in hardened concrete. ASTM International; 2013.
49. B. EN. 12504-4: 2021 testing concrete in structures-determination of ultrasonic pulse velocity. London: British Standards Institution; 2021.
50. A. ASTM, C109/C109M-16a. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). West Conshohocken: ASTM International; 2016.
51. Patankar SV, Ghugal YM, Jamkar SS. Effect of concentration of sodium hydroxide and degree of heat curing on fly ash-based geopolymer mortar. Indian J Mater Sci. 2014;2014:938789. https://doi.org/10.1155/2014/938789.10.1155/2014/938789 ↗
52. Ibrahim WMW, et al. Chemical distributions of different sodium hydroxide molarities on fly ash/dolomite-based geopolymer. Materials. 2022;15(17):6163.10.3390/ma15176163 ↗
53. Wazien AW, Abdullah MMAB, Razak RA, Rozainy MMR, Tahir MFM. Strength and density of geopolymer mortar cured at ambient temperature for use as repair material. IOP Conf Ser Mater Sci Eng. 2016;133(1):012042.10.1088/1757-899X/133/1/012042 ↗
54. Assaedi H, Shaikh F, Low IM. Effect of nano-clay on mechanical and thermal properties of geopolymer. J Asian Ceram Soc. 2016;4(1):19–28.10.1016/j.jascer.2015.10.004 ↗
55. Melar J, et al. The porous network and its interface inside geopolymers as a function of alkali cation and aging. J Phys Chem C. 2015;119(31):17619–32.10.1021/acs.jpcc.5b02340 ↗
56. Ouffa N, Benzaazoua M, Belem T, Trauchessec R, Lecomte A. Alkaline dissolution potential of aluminosilicate minerals for the geosynthesis of mine paste backfill. Mater Today Commun. 2020;24:101221. https://doi.org/10.1016/j.mtcomm.2020.101221.10.1016/j.mtcomm.2020.101221 ↗
57. He P, et al. Effects of Si/Al ratio on the structure and properties of metakaolin based geopolymer. Ceram Int. 2016;42(13):14416–22.10.1016/j.ceramint.2016.06.033 ↗
58. Zhang Y, Li T, Hou D, Zhang J, Jiang J. Insights on magnesium and sulfate ions’ adsorption on the surface of sodium alumino-silicate hydrate (NASH) gel: a molecular dynamics study. Phys Chem Chem Phys. 2018;20(27):18297–310.10.1039/C8CP02469C ↗
59. Skorina T. Ion exchange in amorphous alkali-activated aluminosilicates: potassium based geopolymers. Appl Clay Sci. 2014;87:205–11.10.1016/j.clay.2013.11.003 ↗
60. Zhou S, Zhou S, Zhang J, Tan X, Chen D. Relationship between moisture transportation, efflorescence and structure degradation in fly ash/slag geopolymer. Materials. 2020;13(23):5550.10.3390/ma13235550 ↗
61. Olivia M, Nikraz H. Strength and water penetrability of fly ash geopolymer conrete. J Eng Appl Sci. 2011;6(7):70–8.
62. Görhan G, Kürklü G. The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures. Compos B Eng. 2014;58:371–7.10.1016/j.compositesb.2013.10.082 ↗
63. Tome S, et al. Structural and physico-mechanical investigations of mine tailing-calcined kaolinite based phosphate geopolymer binder. SILICON. 2022;14(7):3563–70. https://doi.org/10.1007/s12633-021-01137-w.10.1007/s12633-021-01137-w ↗
64. Lin W, Zhou F, Luo W, Song T, Li H. Alkali-activated dolomite and its outstanding mechanical strength. Mater Lett. 2020;270:127682. https://doi.org/10.1016/j.matlet.2020.127682.10.1016/j.matlet.2020.127682 ↗
65. Downs RT, Hall-Wallace M. The American Mineralogist crystal structure database. Am Miner. 2003;88(1):247–50.
66. Chen X, et al. Study on the effect of calcium and sulfur content on the properties of fly ash based geopolymer. Constr Build Mater. 2022;314:125650. https://doi.org/10.1016/j.conbuildmat.2021.125650.10.1016/j.conbuildmat.2021.125650 ↗