journal article·2023-05-23

Shear behavior and analytical model of T-type perfobond rib connectors

Yulin Zhan, Wenfeng Huang, Yanyan Li, Cheng Zhang, Junhu Shao, Bo Tian

Publisher page

Abstract

The stress of shear connectors becomes more complicated with the increase of the span length of steel–concrete composite bridges. To ensure sufficient stiffness and ductility, a T-type perfobond rib (T-type PBL) shear connector is proposed. However, its mechanical behavior is not well understood due to the special shape and numerous influencing factors. Therefore, sixty-three finite element models were established based on the push-out test specimens with T-type PBL connectors to investigate the shear behavior and influencing parameters of ultimate bearing capacity. The effects of concrete end-bearing, perforated reinforcement, hole diameter, rib height, and flange width of T-type PBL on the shear-bearing capacity were performed and discussed based on the numerical results. The results showed that the bearing capacity provided by the concrete end-bearing and the perforated reinforcements was about 16% and 10% of the ultimate load. Additionally, the ductility of the specimen could be improved by the perforated reinforcements. It was showed that the shear-bearing capacity increased nonlinearly with the growth of the hole diameter. When the height of rib increased from 80 to 120 mm, the shear-bearing capacity was improved by 12% on average. The impact of flange width on the shear-bearing capacity was insignificant, which was less than 1.5%. Based on the results of parametric analysis. An analytical model for shear-bearing capacity of the T-type perfobond rib shear connector was established, and the validity was verified by relative test results. A basis for the evaluation of shear-bearing capacity, and application of the T-type PBL connectors was provided in this paper.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Choo J, Choi Y, Choi W, Yoo S. Behavioral characteristics of hybrid girders according to type of steel—concrete connection. Arch Civ Mech Eng. 2019;19:47–62. https://doi.org/10.1016/j.acme.2018.08.008.10.1016/j.acme.2018.08.008 ↗
2. Guo JY, Wang JY, Wang YB, Gao XL, Bian C. Experimental study on demountable steel ultra-high performance concrete composite slabs under hogging moment. Arch Civ Mech Eng. 2022;22(3):137. https://doi.org/10.1007/s43452-022-00458-w.10.1007/s43452-022-00458-w ↗
3. Nie JG. Steel and concrete composite bridges. Beijing: China Communications Press; 2011.
4. Oehlers D, Oehlers DJ, Bradford MA. Elementary behaviour of composite steel and concrete structural members. Elsevier; 1999.10.1201/b12849 ↗
5. Xue W, Ding M, Wang H, Luo Z. Static behavior and theoretical model of stud shear connectors. J Bridge Eng. 2008;13(6):623–34. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:6(623).10.1061/(ASCE)1084-0702(2008)13:6(623) ↗
6. Zellner W. (1988) Recent designs of composite bridges and a new type of shear connectors. Composite Construction in Steel and Concrete.
7. Oguejiofor E, Hosain M. Behaviour of perfobond rib shear connectors in composite beams: full-size tests. Can J Civ Eng. 1992;19(2):224–35. https://doi.org/10.1139/l92-028.10.1139/l92-028 ↗
8. Zheng S, Zhao C, Liu Y. Experimental shear strength evaluation of perfobond shear connector with various hole shapes. Struct Eng Mech. 2018;67(2):131–42. https://doi.org/10.12989/sem.2018.67.2.131.10.12989/sem.2018.67.2.131 ↗
9. Oguejiofor EC, Hosain MU. A parametric study of perfobond rib shear connectors. Can J Civ Eng. 1994;21(4):614–25. https://doi.org/10.1139/l94-063.10.1139/l94-063 ↗
10. Kim HY, Jeong YJ, Kim TH, Park SK. Structural performance of steel-concrete composite deck for steel-box girder bridges. KSCE J Civ Eng. 2006;10(5):357–63. https://doi.org/10.1007/bf02830089.10.1007/BF02830089 ↗
11. Xu X, Liu Y, Zuo Y. Contribution of perforated steel ribs to load-carrying capacities of steel and concrete composite slabs under negative bending. Adv Struct Eng. 2018;21(12):1879–94. https://doi.org/10.1177/1369433218758774.10.1177/1369433218758774 ↗
12. Ding F-X, Liu J, Liu X-M, Guo F-Q, Jiang L-Z. Flexural stiffness of steel-concrete composite beam under positive moment. Steel Compos Struct. 2016;20(6):1369–89. https://doi.org/10.12989/scs.2016.20.6.1369.10.12989/scs.2016.20.6.1369 ↗
13. Deng W, Xiong Y, Liu D, Zhang J. Static and fatigue behavior of shear connectors for a steel-concrete composite girder. J Constr Steel Res. 2019;159:134–46. https://doi.org/10.1016/j.jcsr.2019.04.031.10.1016/j.jcsr.2019.04.031 ↗
14. Zhang J, Hu X, Kou L, Zhang B, Jiang Y, Yu H. Experimental study of the short-term and long-term behavior of perfobond connectors. J Constr Steel Res. 2018;150:462–74. https://doi.org/10.1016/j.jcsr.2018.09.004.10.1016/j.jcsr.2018.09.004 ↗
15. Leonhardt F, Andrä W, Andrä HP, Harre W. Neues, vorteilhaftes Verbundmittel für Stahlverbund-Tragwerke mit hoher Dauerfestigkeit. Beton-und Stahlbetonbau. 1987;82(12):325–31. https://doi.org/10.1002/best.198700500.10.1002/best.198700500 ↗
16. Kim HY, Jeong YJ. Experimental investigation on behaviour of steel–concrete composite bridge decks with perfobond ribs. J Constr Steel Res. 2006;62(5):463–71. https://doi.org/10.1016/j.jcsr.2005.08.010.10.1016/j.jcsr.2005.08.010 ↗
17. Vianna JdC, de Andrade SAL, Vellasco PCGdS, Costa-Neves LF. Experimental study of Perfobond shear connectors in composite construction. J Constr Steel Res. 2013;81:62–75. https://doi.org/10.1016/j.jcsr.2012.11.002.10.1016/j.jcsr.2012.11.002 ↗
18. Chung CH, Lee HS. Evaluation of shear strength of the ㄱ type perfobond rib shear connectors. KSCE J Civ Environ Eng Res. 2005;25(5A):879–88.
19. Vianna JdC, Costa-Neves LF, Vellasco PCGdS, de Andrade SAL. Experimental assessment of Perfobond and T-Perfobond shear connectors’ structural response. J Constr Steel Res. 2009;65(2):408–21. https://doi.org/10.1016/j.jcsr.2008.02.011.10.1016/j.jcsr.2008.02.011 ↗
20. Chung CH, Lee J, Kim JS. Shear strength of T-type Perfobond rib shear connectors. KSCE J Civ Eng. 2016;20(5):1824–34. https://doi.org/10.1007/s12205-015-0095-8.10.1007/s12205-015-0095-8 ↗
21. Zhan YL, Ma ZJ, Zhao RD, Li GF, Xiang TY. Interface behavior between steel and concrete connected by bonding. J Bridge Eng. 2016;21(6):04016026. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000813.10.1061/(ASCE)BE.1943-5592.0000813 ↗
22. ABAQUS. ABAQUS standard user’s manual. RI(USA): Dassault Systemes Corp; 2012.
23. Zheng S, Liu Y, Liu Y, Zhao C. Experimental and parametric study on the pull-out resistance of a notched perfobond shear connector. Appl Sci. 2019. https://doi.org/10.3390/app9040764.10.3390/app9040764 ↗
24. Polus Ł, Szumigała M. An experimental and numerical study of aluminium–concrete joints and composite beams. Arch Civ Mech Eng. 2019;19(2):375–90. https://doi.org/10.1016/j.acme.2018.11.007.10.1016/j.acme.2018.11.007 ↗
25. Wang W, Yi Z, Tian B, Zhang Y, Lu S. Nonlinear finite element analysis of PBL shear connectors in hybrid structures. Structures. 2021;33:4642–54. https://doi.org/10.1016/j.istruc.2021.07.047.10.1016/j.istruc.2021.07.047 ↗
26. Yan JB, Zhang W, Liew JYR, Li ZX. Numerical studies on shear resistance of headed stud connectors in different concretes under Arctic low temperature. Mater Des. 2016;112:184–96. https://doi.org/10.1016/j.matdes.2016.09.062.10.1016/j.matdes.2016.09.062 ↗
27. GB/T 50081-2019. Chinese standard: standard for test methods of concrete physical and mechanical properties. PRC: Ministry of Housing and Urban-Rural Development; 2019.
28. GB/T 228.1-2021. Metallic materials—tensile testing—part 1: method of test at room temperature. Beijing, China: State Administration for Market Regulation; 2021.
29. GB/T 1499.2. Steel for the reinforcement of concrete—part 2: hot rolled ribbed bars, general administration of quality supervision. Beijing, China: Inspection and Quarantine PRC; 2018.
30. Valente I, Cruz PJ. Experimental analysis of Perfobond shear connection between steel and lightweight concrete. J Constr Steel Res. 2004;60(3–5):465–79. https://doi.org/10.1016/S0143-974X(03)00124-X.10.1016/S0143-974X(03)00124-X ↗
31. Cândido-Martins JPS, Costa-Neves LF, Vellasco PCGdS. Experimental evaluation of the structural response of Perfobond shear connectors. Eng Struct. 2010;32(8):1976–85. https://doi.org/10.1016/j.engstruct.2010.02.031.10.1016/j.engstruct.2010.02.031 ↗
32. Kim SH, Kim KS, Han O, Park JS. Influence of transverse rebar on shear behavior of Y-type perfobond rib shear connection. Constr Build Mater. 2018;180:254–64. https://doi.org/10.1016/j.conbuildmat.2018.06.002.10.1016/j.conbuildmat.2018.06.002 ↗
33. Yang Y, Chen Y. Experimental study on the shear capacity of PBL shear connectors. Eng Mech. 2018;35(09):89–96.
34. Su Q, Wang W, Wang R, Wu C. Calculation and influencing factors analysis of ultimate bearing capacity of T-shaped perforated rib connector. China J Highw Transp. 2013;26(03):86–93. https://doi.org/10.19721/j.cnki.1001-7372.2013.03.009.10.19721/j.cnki.1001-7372.2013.03.009 ↗
35. Zhang Z, Zhang SN, Deng EF, Yu CY, Tang Y, Wang Y, Sun DS. Shear behavior and design of an innovative embedded connector with flange for steel–concrete composite girder. Arch Civ Mech Eng. 2022;22(4):195. https://doi.org/10.1007/s43452-022-00515-4.10.1007/s43452-022-00515-4 ↗
36. Oguejiofor E, Hosain M. Numerical analysis of push-out specimens with perfobond rib connectors. Comput Struct. 1997;62(4):617–24. https://doi.org/10.1016/S0045-7949(96)00270-2.10.1016/S0045-7949(96)00270-2 ↗
37. Ahn JH, Lee CG, Won JH, Kim SH. Shear resistance of the perfobond-rib shear connector depending on concrete strength and rib arrangement. J Constr Steel Res. 2010;66(10):1295–307. https://doi.org/10.1016/j.jcsr.2010.04.008.10.1016/j.jcsr.2010.04.008 ↗
38. Su Q, Wang R, Wang W. Experiments on mechanical properties of T-shape perforated rib connector. Struct Eng. 2011;27(06):100–5. https://doi.org/10.15935/j.cnki.jggcs.2011.06.024.10.15935/j.cnki.jggcs.2011.06.024 ↗
39. Kim SH, Choi KT, Park SJ, Park SM, Lung CY. Experimental shear resistance evaluation of Y-type perfobond rib shear connector. J Constr Steel Res. 2013;82:1–18. https://doi.org/10.1016/j.jcsr.2012.12.001.10.1016/j.jcsr.2012.12.001 ↗
40. He SH, Fang Z, Fang YW, Liu M, Liu LY, Mosallam AS. Experimental study on perfobond strip connector in steel-concrete joints of hybrid bridges. J Constr Steel Res. 2016;118:169–79. https://doi.org/10.1016/j.jcsr.2015.11.009.10.1016/j.jcsr.2015.11.009 ↗